remove unneccessary function

firmware/targets/f7/api_symbols.csv

@@ -1,5 +1,5 @@
 entry,status,name,type,params
-Version,+,7.36,,
+Version,+,7.37,,
 Header,+,applications/services/bt/bt_service/bt.h,,
 Header,+,applications/services/cli/cli.h,,
 Header,+,applications/services/cli/cli_vcp.h,,
@@ -1166,7 +1166,6 @@ Function,+,furi_hal_nfc_emulate_nfca,_Bool,"uint8_t*, uint8_t, uint8_t*, uint8_t
 Function,+,furi_hal_nfc_exit_sleep,void,
 Function,+,furi_hal_nfc_field_off,void,
 Function,+,furi_hal_nfc_field_on,void,
-Function,-,furi_hal_nfc_gen_bitstream,void,"FuriHalNfcTxRxContext*, uint8_t*, size_t"
 Function,-,furi_hal_nfc_init,void,
 Function,+,furi_hal_nfc_is_busy,_Bool,
 Function,+,furi_hal_nfc_is_init,_Bool,
@@ -1190,7 +1189,6 @@ Function,+,furi_hal_nfc_stop,void,
 Function,+,furi_hal_nfc_stop_cmd,void,
 Function,+,furi_hal_nfc_tx_rx,_Bool,"FuriHalNfcTxRxContext*, uint16_t"
 Function,+,furi_hal_nfc_tx_rx_full,_Bool,FuriHalNfcTxRxContext*
-Function,-,furi_hal_nfcv_listen_start,void,
 Function,-,furi_hal_os_init,void,
 Function,+,furi_hal_os_tick,void,
 Function,+,furi_hal_power_check_otg_status,void,
@@ -1968,11 +1966,6 @@ Function,-,nfca_get_crc16,uint16_t,"uint8_t*, uint16_t"
 Function,-,nfca_signal_alloc,NfcaSignal*,
 Function,-,nfca_signal_encode,void,"NfcaSignal*, uint8_t*, uint16_t, uint8_t*"
 Function,-,nfca_signal_free,void,NfcaSignal*
-Function,-,nfca_trans_rx_continue,void,NfcaTransRxState*
-Function,-,nfca_trans_rx_deinit,void,NfcaTransRxState*
-Function,-,nfca_trans_rx_init,void,NfcaTransRxState*
-Function,-,nfca_trans_rx_loop,_Bool,"NfcaTransRxState*, uint32_t"
-Function,-,nfca_trans_rx_pause,void,NfcaTransRxState*
 Function,-,nfcv_emu_deinit,void,NfcVData*
 Function,-,nfcv_emu_init,void,"FuriHalNfcDevData*, NfcVData*"
 Function,-,nfcv_emu_loop,_Bool,"FuriHalNfcTxRxContext*, FuriHalNfcDevData*, NfcVData*, uint32_t"

firmware/targets/f7/furi_hal/furi_hal_nfc.c

@@ -367,38 +367,6 @@ void furi_hal_nfc_listen_start(FuriHalNfcDevData* nfc_data) {
     st25r3916ExecuteCommand(ST25R3916_CMD_GOTO_SENSE);
 }
 
-void furi_hal_nfcv_listen_start() {
-    furi_hal_gpio_init(&gpio_nfc_irq_rfid_pull, GpioModeInput, GpioPullDown, GpioSpeedVeryHigh);
-    // Clear interrupts
-    st25r3916ClearInterrupts();
-    // Mask all interrupts
-    st25r3916DisableInterrupts(ST25R3916_IRQ_MASK_ALL);
-    // RESET
-    st25r3916ExecuteCommand(ST25R3916_CMD_STOP);
-    // Setup registers
-    st25r3916WriteRegister(
-        ST25R3916_REG_OP_CONTROL,
-        ST25R3916_REG_OP_CONTROL_en | ST25R3916_REG_OP_CONTROL_rx_en |
-            ST25R3916_REG_OP_CONTROL_en_fd_auto_efd);
-    st25r3916WriteRegister(
-        ST25R3916_REG_MODE,
-        ST25R3916_REG_MODE_targ_targ | ST25R3916_REG_MODE_om3 | ST25R3916_REG_MODE_om0);
-    st25r3916WriteRegister(
-        ST25R3916_REG_PASSIVE_TARGET,
-        ST25R3916_REG_PASSIVE_TARGET_fdel_2 | ST25R3916_REG_PASSIVE_TARGET_fdel_0 |
-            ST25R3916_REG_PASSIVE_TARGET_d_ac_ap2p | ST25R3916_REG_PASSIVE_TARGET_d_212_424_1r);
-    st25r3916WriteRegister(ST25R3916_REG_MASK_RX_TIMER, 0x02);
-
-    // Mask interrupts
-    uint32_t clear_irq_mask =
-        (ST25R3916_IRQ_MASK_RXE | ST25R3916_IRQ_MASK_RXE_PTA | ST25R3916_IRQ_MASK_WU_A_X |
-         ST25R3916_IRQ_MASK_WU_A);
-    st25r3916EnableInterrupts(clear_irq_mask);
-
-    // Go to sense
-    st25r3916ExecuteCommand(ST25R3916_CMD_GOTO_SENSE);
-}
-
 void rfal_interrupt_callback_handler() {
     furi_event_flag_set(event, EVENT_FLAG_INTERRUPT);
 }

firmware/targets/furi_hal_include/furi_hal_nfc.h

@@ -177,12 +177,6 @@ bool furi_hal_nfc_listen(
  */
 void furi_hal_nfc_listen_start(FuriHalNfcDevData* nfc_data);
 
-/** Start Target Listen mode
- * @note RFAL free implementation
- *
- */
-void furi_hal_nfcv_listen_start();
-
 /** Read data in Target Listen mode
  * @note Must be called only after furi_hal_nfc_listen_start()
  *