Merge remote-tracking branch 'UFW/dev' into archive

.vscode/example/tasks.json

@@ -4,17 +4,29 @@
     "version": "2.0.0",
     "tasks": [
         {
-            "label": "[Release] Build",
+            "label": "[Release] Build Firmware",
             "group": "build",
             "type": "shell",
             "command": "./fbt COMPACT=1 DEBUG=0"
         },
         {
-            "label": "[Debug] Build",
+            "label": "[Debug] Build Firmware",
             "group": "build",
             "type": "shell",
             "command": "./fbt"
         },
+        {
+            "label": "[FBT] Format",
+            "group": "build",
+            "type": "shell",
+            "command": "./fbt format"
+        },
+        {
+            "label": "[FBT] Clear",
+            "group": "build",
+            "type": "shell",
+            "command": "./fbt -c"
+        },
         {
             "label": "[Release] Flash (ST-Link)",
             "group": "build",
@@ -123,17 +135,29 @@
             "type": "shell",
             "command": "./fbt COMPACT=1 DEBUG=0 fap_dist"
         },
+        {
+            "label": "[Debug] Build App",
+            "group": "build",
+            "type": "shell",
+            "command": "./fbt build APPSRC=${relativeFileDirname}"
+        },
+        {
+            "label": "[Release] Build App",
+            "group": "build",
+            "type": "shell",
+            "command": "./fbt COMPACT=1 DEBUG=0 build APPSRC=${relativeFileDirname}"
+        },
         {
             "label": "[Debug] Launch App on Flipper",
             "group": "build",
             "type": "shell",
-            "command": "./fbt launch_app APPSRC=${relativeFileDirname}"
+            "command": "./fbt launch APPSRC=${relativeFileDirname}"
         },
         {
             "label": "[Release] Launch App on Flipper",
             "group": "build",
             "type": "shell",
-            "command": "./fbt COMPACT=1 DEBUG=0 launch_app APPSRC=${relativeFileDirname}"
+            "command": "./fbt COMPACT=1 DEBUG=0 launch APPSRC=${relativeFileDirname}"
         },
         {
             "label": "[Debug] Launch App on Flipper with Serial Console",

CHANGELOG.md

@@ -2,17 +2,21 @@
 * !!! **Warning! After installing, Desktop settings (Favoutite apps, PIN Code, AutoLock time..) will be resetted to default due to settings changes, Please set your PIN code, Favourite apps again in Settings->Desktop** !!!
 * This next text applies to you only **If you have copied any apps manually** into `apps` folder and don't know that you need to update those apps manually in same way you added them - remove `apps` folder or that specific apps you copied on your microSD before installing this release to avoid issues due to OFW API version update! **If you using regular builds or extra pack builds (e) without your manually added apps, all included apps will be installed automatically, no extra actions needed!**
 -----
+* SubGHz Remote: Merged SubGHz Remote and Remote maker in one app, **use back button to access remote maker** (by @gid9798 | PR #545)
 * SubGHz: Port latest OFW external radio driver, fix issues (now you can make drivers for other radio chips) (by @gid9798 | PR #539 #536 #535 #534)
 * GUI module: SubMenu fix vertical orientation (by @gid9798 | PR #543)
 * Apps: After merge fixes (by @gid9798 | PR #537)
 * Docs: Update docs for debug build and update vscode example, please remove `debug_pack` target if you had it in your workflow
-* Infrared: Updated universal remote assets (by @amec0e | PR #544)
+* Infrared: Updated universal remote assets (by @amec0e | PR #544 #546)
+* Plugins: NRF24 plugins -> Updates by @Sil333033 with some changes by @xMasterX -> furi_hal_speaker direct calls was removed and replaced with notification service to avoid bypassing of user set silent mode -> What was changed - NRF24 connection check added, app folders was moved (uses migrate, all done automatically), and mousejacker now uses badusb folder for badusb scripts
 * Plugins: Added Camera Suite GPIO application for the ESP32-CAM module. [(by CodyTolene)](https://github.com/CodyTolene/Flipper-Zero-Camera-Suite) (PR #541)
 * Plugins: Updated ESP32: WiFi Marauder companion plugin [(by 0xchocolate)](https://github.com/0xchocolate/flipperzero-wifi-marauder)
 * Plugins: Updated **NFC Maker** plugin (make tags with URLs, Wifi and other things) [(by Willy-JL)](https://github.com/ClaraCrazy/Flipper-Xtreme/tree/dev/applications/external/nfc_maker) 
 * Plugins: Updated **Mifare Nested** [(by AloneLiberty)](https://github.com/AloneLiberty/FlipperNested)
 * Plugins: Updated Lightmeter [(by oleksiikutuzov)](https://github.com/oleksiikutuzov/flipperzero-lightmeter)
 * Plugins: Updated **Multi (RFID/iButton) Fuzzer** [(by @gid9798)](https://github.com/DarkFlippers/Multi_Fuzzer)
+* OFW: IButton: on delete scene key name not fully display if so long
+* OFW: Radio headers in SDK
 * OFW: Loader: good looking error messages
 * OFW: Desktop,Cli: add uptime info
 * OFW: Archive and file browser fixes

applications/drivers/subghz/application.fam

@@ -4,5 +4,6 @@ App(
     targets=["f7"],
     entry_point="subghz_device_cc1101_ext_ep",
     requires=["subghz"],
+    sdk_headers=["cc1101_ext/cc1101_ext_interconnect.h"],
     fap_libs=["hwdrivers"],
 )

applications/examples/example_thermo/README.md

@@ -18,7 +18,7 @@ Before launching the application, connect the sensor to Flipper's external GPIO
 In order to launch this demo, follow the steps below:
 1. Make sure your Flipper has an SD card installed.
 2. Connect your Flipper to the computer via a USB cable.
-3. Run `./fbt launch_app APPSRC=example_thermo` in your terminal emulator of choice.
+3. Run `./fbt launch APPSRC=example_thermo` in your terminal emulator of choice.
 
 ## Changing the data pin
 It is possible to use other GPIO pin as a 1-Wire data pin. In order to change it, set the `THERMO_GPIO_PIN` macro to any of the options listed below:

applications/external/mousejacker/lib/nrf24/nrf24.c

@@ -518,3 +518,13 @@ uint8_t nrf24_find_channel(
 
     return ch;
 }
+
+bool nrf24_check_connected(FuriHalSpiBusHandle* handle) {
+    uint8_t status = nrf24_status(handle);
+
+    if(status != 0x00) {
+        return true;
+    } else {
+        return false;
+    }
+}

applications/external/mousejacker/lib/nrf24/nrf24.h

@@ -361,6 +361,13 @@ void int32_to_bytes(uint32_t val, uint8_t* out, bool bigendian);
  */
 uint32_t bytes_to_int32(uint8_t* bytes, bool bigendian);
 
+/** Check if the nrf24 is connected
+ * @param      handle  - pointer to FuriHalSpiHandle
+ * 
+ * @return     true if connected, otherwise false
+*/
+bool nrf24_check_connected(FuriHalSpiBusHandle* handle);
+
 #ifdef __cplusplus
 }
 #endif

applications/external/mousejacker/mousejacker.c

@@ -9,15 +9,14 @@
 #include <furi_hal_interrupt.h>
 #include <furi_hal_resources.h>
 #include <nrf24.h>
+#include <notification/notification_messages.h>
 #include "mousejacker_ducky.h"
 #include <nrf24_mouse_jacker_icons.h>
 
 #define TAG "mousejacker"
 #define LOGITECH_MAX_CHANNEL 85
-#define NRFSNIFF_APP_PATH_FOLDER "/ext/nrfsniff"
+#define NRFSNIFF_APP_PATH_FOLDER_ADDRESSES EXT_PATH("apps_data/nrf24sniff/addresses.txt")
-#define NRFSNIFF_APP_PATH_EXTENSION ".txt"
+#define LOCAL_BADUSB_FOLDER EXT_PATH("badusb")
-#define NRFSNIFF_APP_FILENAME "addresses.txt"
-#define MOUSEJACKER_APP_PATH_FOLDER "/ext/mousejacker"
 #define MOUSEJACKER_APP_PATH_EXTENSION ".txt"
 #define MAX_ADDRS 100
 
@@ -32,12 +31,13 @@ typedef struct {
 } PluginEvent;
 
 uint8_t addrs_count = 0;
-uint8_t addr_idx = 0;
+int8_t addr_idx = 0;
 uint8_t loaded_addrs[MAX_ADDRS][6]; // first byte is rate, the rest are the address
 
 char target_fmt_text[] = "Target addr: %s";
 char target_address_str[12] = "None";
 char target_text[30];
+char index_text[30];
 
 static void render_callback(Canvas* const canvas, void* ctx) {
     furi_assert(ctx);
@@ -53,8 +53,15 @@ static void render_callback(Canvas* const canvas, void* ctx) {
         snprintf(target_text, sizeof(target_text), target_fmt_text, target_address_str);
         canvas_draw_str_aligned(canvas, 7, 10, AlignLeft, AlignBottom, target_text);
         canvas_draw_str_aligned(canvas, 22, 20, AlignLeft, AlignBottom, "<- select address ->");
-        canvas_draw_str_aligned(canvas, 10, 30, AlignLeft, AlignBottom, "Press Ok button to ");
+        snprintf(
-        canvas_draw_str_aligned(canvas, 10, 40, AlignLeft, AlignBottom, "browse for ducky script");
+            index_text, sizeof(index_text), "Address index: %d/%d", addr_idx + 1, addrs_count);
+        canvas_draw_str_aligned(canvas, 10, 30, AlignLeft, AlignBottom, index_text);
+        canvas_draw_str_aligned(canvas, 10, 40, AlignLeft, AlignBottom, "Press Ok button to ");
+        canvas_draw_str_aligned(canvas, 10, 50, AlignLeft, AlignBottom, "browse for ducky script");
+        if(!plugin_state->is_nrf24_connected) {
+            canvas_draw_str_aligned(
+                canvas, 10, 60, AlignLeft, AlignBottom, "Connect NRF24 to GPIO!");
+        }
     } else if(plugin_state->addr_err) {
         canvas_draw_str_aligned(
             canvas, 10, 10, AlignLeft, AlignBottom, "Error: No nrfsniff folder");
@@ -94,6 +101,7 @@ static void input_callback(InputEvent* input_event, FuriMessageQueue* event_queu
 
 static void mousejacker_state_init(PluginState* const plugin_state) {
     plugin_state->is_thread_running = false;
+    plugin_state->is_nrf24_connected = true;
 }
 
 static void hexlify(uint8_t* in, uint8_t size, char* out) {
@@ -107,7 +115,7 @@ static bool open_ducky_script(Stream* stream, PluginState* plugin_state) {
     bool result = false;
     FuriString* path;
     path = furi_string_alloc();
-    furi_string_set(path, MOUSEJACKER_APP_PATH_FOLDER);
+    furi_string_set(path, LOCAL_BADUSB_FOLDER);
 
     DialogsFileBrowserOptions browser_options;
     dialog_file_browser_set_basic_options(
@@ -132,27 +140,17 @@ static bool open_ducky_script(Stream* stream, PluginState* plugin_state) {
 }
 
 static bool open_addrs_file(Stream* stream) {
-    DialogsApp* dialogs = furi_record_open("dialogs");
     bool result = false;
     FuriString* path;
     path = furi_string_alloc();
-    furi_string_set(path, NRFSNIFF_APP_PATH_FOLDER);
+    furi_string_set(path, NRFSNIFF_APP_PATH_FOLDER_ADDRESSES);
 
-    DialogsFileBrowserOptions browser_options;
+    if(!file_stream_open(stream, furi_string_get_cstr(path), FSAM_READ, FSOM_OPEN_EXISTING)) {
-    dialog_file_browser_set_basic_options(
+        FURI_LOG_D(TAG, "Cannot open file \"%s\"", furi_string_get_cstr(path));
-        &browser_options, NRFSNIFF_APP_PATH_EXTENSION, &I_sub1_10px);
+    } else {
-    browser_options.hide_ext = false;
+        result = true;
-
-    bool ret = dialog_file_browser_show(dialogs, path, path, &browser_options);
-
-    furi_record_close("dialogs");
-    if(ret) {
-        if(!file_stream_open(stream, furi_string_get_cstr(path), FSAM_READ, FSOM_OPEN_EXISTING)) {
-            FURI_LOG_D(TAG, "Cannot open file \"%s\"", furi_string_get_cstr(path));
-        } else {
-            result = true;
-        }
     }
+
     furi_string_free(path);
     return result;
 }
@@ -277,12 +275,6 @@ static int32_t mj_worker_thread(void* ctx) {
     return 0;
 }
 
-void start_mjthread(PluginState* plugin_state) {
-    if(!plugin_state->is_thread_running) {
-        furi_thread_start(plugin_state->mjthread);
-    }
-}
-
 int32_t mousejacker_app(void* p) {
     UNUSED(p);
     FuriMessageQueue* event_queue = furi_message_queue_alloc(8, sizeof(PluginEvent));
@@ -297,6 +289,8 @@ int32_t mousejacker_app(void* p) {
         return 255;
     }
 
+    NotificationApp* notification = furi_record_open(RECORD_NOTIFICATION);
+
     // Set system callbacks
     ViewPort* view_port = view_port_alloc();
     view_port_draw_callback_set(view_port, render_callback, plugin_state);
@@ -307,7 +301,6 @@ int32_t mousejacker_app(void* p) {
     gui_add_view_port(gui, view_port, GuiLayerFullscreen);
 
     plugin_state->storage = furi_record_open(RECORD_STORAGE);
-    storage_common_mkdir(plugin_state->storage, MOUSEJACKER_APP_PATH_FOLDER);
     plugin_state->file_stream = file_stream_alloc(plugin_state->storage);
 
     plugin_state->mjthread = furi_thread_alloc();
@@ -344,21 +337,25 @@ int32_t mousejacker_app(void* p) {
                     case InputKeyRight:
                         if(!plugin_state->addr_err) {
                             addr_idx++;
-                            if(addr_idx > addrs_count) addr_idx = 0;
+                            if(addr_idx >= addrs_count) addr_idx = 0;
                             hexlify(loaded_addrs[addr_idx] + 1, 5, target_address_str);
                         }
                         break;
                     case InputKeyLeft:
                         if(!plugin_state->addr_err) {
                             addr_idx--;
-                            if(addr_idx == 0) addr_idx = addrs_count - 1;
+                            if(addr_idx < 0) addr_idx = addrs_count - 1;
                             hexlify(loaded_addrs[addr_idx] + 1, 5, target_address_str);
                         }
                         break;
                     case InputKeyOk:
                         if(!plugin_state->addr_err) {
-                            if(!plugin_state->is_thread_running) {
+                            if(!nrf24_check_connected(nrf24_HANDLE)) {
-                                start_mjthread(plugin_state);
+                                plugin_state->is_nrf24_connected = false;
+                                view_port_update(view_port);
+                                notification_message(notification, &sequence_error);
+                            } else if(!plugin_state->is_thread_running) {
+                                furi_thread_start(plugin_state->mjthread);
                                 view_port_update(view_port);
                             }
                         }
@@ -388,6 +385,7 @@ int32_t mousejacker_app(void* p) {
     view_port_enabled_set(view_port, false);
     gui_remove_view_port(gui, view_port);
     furi_record_close(RECORD_GUI);
+    furi_record_close(RECORD_NOTIFICATION);
     furi_record_close(RECORD_STORAGE);
     view_port_free(view_port);
     furi_message_queue_free(event_queue);

applications/external/mousejacker/mousejacker_ducky.h

@@ -26,6 +26,7 @@ typedef struct {
     bool addr_err;
     bool is_thread_running;
     bool is_ducky_running;
+    bool is_nrf24_connected;
     bool close_thread_please;
     Storage* storage;
     FuriThread* mjthread;

applications/external/nrfsniff/lib/nrf24/nrf24.c

@@ -518,3 +518,13 @@ uint8_t nrf24_find_channel(
 
     return ch;
 }
+
+bool nrf24_check_connected(FuriHalSpiBusHandle* handle) {
+    uint8_t status = nrf24_status(handle);
+
+    if(status != 0x00) {
+        return true;
+    } else {
+        return false;
+    }
+}

applications/external/nrfsniff/lib/nrf24/nrf24.h

@@ -361,6 +361,13 @@ void int32_to_bytes(uint32_t val, uint8_t* out, bool bigendian);
  */
 uint32_t bytes_to_int32(uint8_t* bytes, bool bigendian);
 
+/** Check if the nrf24 is connected
+ * @param      handle  - pointer to FuriHalSpiHandle
+ * 
+ * @return     true if connected, otherwise false
+*/
+bool nrf24_check_connected(FuriHalSpiBusHandle* handle);
+
 #ifdef __cplusplus
 }
 #endif

applications/external/nrfsniff/nrfsniff.c

@@ -10,11 +10,11 @@
 
 #define LOGITECH_MAX_CHANNEL 85
 #define COUNT_THRESHOLD 2
-#define DEFAULT_SAMPLE_TIME 8000
+#define DEFAULT_SAMPLE_TIME 4000
 #define MAX_ADDRS 100
 #define MAX_CONFIRMED 32
 
-#define NRFSNIFF_APP_PATH_FOLDER "/ext/nrfsniff"
+#define NRFSNIFF_APP_PATH_FOLDER STORAGE_APP_DATA_PATH_PREFIX
 #define NRFSNIFF_APP_FILENAME "addresses.txt"
 #define TAG "nrfsniff"
 
@@ -341,6 +341,7 @@ int32_t nrfsniff_app(void* p) {
     NotificationApp* notification = furi_record_open(RECORD_NOTIFICATION);
 
     Storage* storage = furi_record_open(RECORD_STORAGE);
+    storage_common_migrate(storage, EXT_PATH("nrfsniff"), NRFSNIFF_APP_PATH_FOLDER);
     storage_common_mkdir(storage, NRFSNIFF_APP_PATH_FOLDER);
 
     PluginEvent event;
@@ -387,13 +388,19 @@ int32_t nrfsniff_app(void* p) {
                         break;
                     case InputKeyOk:
                         // toggle sniffing
-                        sniffing_state = !sniffing_state;
+                        if(nrf24_check_connected(nrf24_HANDLE)) {
-                        if(sniffing_state) {
+                            sniffing_state = !sniffing_state;
-                            clear_cache();
+                            if(sniffing_state) {
-                            start_sniffing();
+                                clear_cache();
-                            start = furi_get_tick();
+                                start_sniffing();
-                        } else
+                                start = furi_get_tick();
-                            wrap_up(storage, notification);
+                            } else {
+                                wrap_up(storage, notification);
+                            }
+                        } else {
+                            notification_message(notification, &sequence_error);
+                        }
+
                         break;
                     case InputKeyBack:
                         if(event.input.type == InputTypeLong) processing = false;

applications/main/ibutton/scenes/ibutton_scene_delete_confirm.c

@@ -12,15 +12,15 @@ void ibutton_scene_delete_confirm_on_enter(void* context) {
     widget_add_button_element(
         widget, GuiButtonTypeRight, "Delete", ibutton_widget_callback, context);
 
-    furi_string_printf(tmp, "Delete %s?", ibutton->key_name);
+    furi_string_printf(tmp, "\e#Delete %s?\e#", ibutton->key_name);
-    widget_add_string_element(
+    widget_add_text_box_element(
-        widget, 128 / 2, 0, AlignCenter, AlignTop, FontPrimary, furi_string_get_cstr(tmp));
+        widget, 0, 0, 128, 23, AlignCenter, AlignCenter, furi_string_get_cstr(tmp), false);
 
     furi_string_reset(tmp);
     ibutton_protocols_render_brief_data(ibutton->protocols, key, tmp);
 
     widget_add_string_multiline_element(
-        widget, 128 / 2, 16, AlignCenter, AlignTop, FontSecondary, furi_string_get_cstr(tmp));
+        widget, 128 / 2, 24, AlignCenter, AlignTop, FontSecondary, furi_string_get_cstr(tmp));
 
     view_dispatcher_switch_to_view(ibutton->view_dispatcher, iButtonViewWidget);
     furi_string_free(tmp);

applications/main/subghz/application.fam

@@ -1,8 +1,9 @@
 App(
     appid="subghz",
     name="Sub-GHz",
-    apptype=FlipperAppType.MENUEXTERNAL,
+    apptype=FlipperAppType.APP,
     targets=["f7"],
+    cdefines=["APP_SUBGHZ"],
     entry_point="subghz_app",
     requires=[
         "gui",
@@ -15,7 +16,7 @@ App(
     ],
     icon="A_Sub1ghz_14",
     stack_size=3 * 1024,
-    order=10,
+    order=1,
     fap_libs=["assets", "hwdrivers"],
     fap_icon="icon.png",
     fap_category="Sub-GHz",
@@ -26,6 +27,7 @@ App(
     targets=["f7"],
     apptype=FlipperAppType.STARTUP,
     entry_point="subghz_on_system_start",
+    requires=["subghz"],
     order=40,
 )
 

applications/services/loader/loader_menu.c

@@ -94,7 +94,25 @@ static uint32_t loader_menu_exit(void* context) {
 }
 
 static void loader_menu_build_menu(LoaderMenuApp* app, LoaderMenu* menu) {
-    size_t i;
+    size_t i = 0;
+
+    menu_add_item(
+        app->primary_menu,
+        LOADER_APPLICATIONS_NAME,
+        &A_Plugins_14,
+        i++,
+        loader_menu_applications_callback,
+        (void*)menu);
+
+    for(i = 0; i < FLIPPER_APPS_COUNT; i++) {
+        menu_add_item(
+            app->primary_menu,
+            FLIPPER_APPS[i].name,
+            FLIPPER_APPS[i].icon,
+            i,
+            loader_menu_apps_callback,
+            (void*)menu);
+    }
 
     for(i = 0; i < FLIPPER_EXTERNAL_APPS_COUNT; i++) {
         menu_add_item(
@@ -106,24 +124,8 @@ static void loader_menu_build_menu(LoaderMenuApp* app, LoaderMenu* menu) {
             (void*)menu);
     }
 
-    for(i = 0; i < FLIPPER_APPS_COUNT; i++) {
-        menu_add_item(
-            app->primary_menu,
-            FLIPPER_APPS[i].name,
-            FLIPPER_APPS[i].icon,
-            i,
-            loader_menu_apps_callback,
-            (void*)menu);
-    }
     menu_add_item(
         app->primary_menu, "Settings", &A_Settings_14, i++, loader_menu_switch_to_settings, app);
-    menu_add_item(
-        app->primary_menu,
-        LOADER_APPLICATIONS_NAME,
-        &A_Plugins_14,
-        i++,
-        loader_menu_applications_callback,
-        (void*)menu);
 };
 
 static void loader_menu_build_submenu(LoaderMenuApp* app, LoaderMenu* loader_menu) {

applications/services/power/power_service/power.c

@@ -300,6 +300,7 @@ static bool power_update_info(Power* power) {
 
     info.is_charging = furi_hal_power_is_charging();
     info.gauge_is_ok = furi_hal_power_gauge_is_ok();
+    info.is_shutdown_requested = furi_hal_power_is_shutdown_requested();
     info.charge = furi_hal_power_get_pct();
     info.health = furi_hal_power_get_bat_health_pct();
     info.capacity_remaining = furi_hal_power_get_battery_remaining_capacity();
@@ -328,7 +329,7 @@ static void power_check_low_battery(Power* power) {
     }
 
     // Check battery charge and vbus voltage
-    if((power->info.charge == 0) && (power->info.voltage_vbus < 4.0f) &&
+    if((power->info.is_shutdown_requested) && (power->info.voltage_vbus < 4.0f) &&
        power->show_low_bat_level_message) {
         if(!power->battery_low) {
             view_dispatcher_send_to_front(power->view_dispatcher);

applications/services/power/power_service/power.h

@@ -37,6 +37,7 @@ typedef struct {
 typedef struct {
     bool gauge_is_ok;
     bool is_charging;
+    bool is_shutdown_requested;
 
     float current_charger;
     float current_gauge;

applications/settings/power_settings_app/views/battery_info.c

@@ -54,8 +54,7 @@ static void draw_battery(Canvas* canvas, BatteryInfoModel* data, int x, int y) {
             (uint32_t)(data->vbus_voltage * 10) % 10,
             current);
     } else if(current < -5) {
-        // Often gauge reports anything in the range 1~5ma as 5ma
+        // 0-5ma deadband
-        // That brings confusion, so we'll treat it as Napping
         snprintf(
             emote,
             sizeof(emote),

documentation/AppsOnSDCard.md

@@ -13,7 +13,8 @@ FAPs are created and developed the same way as internal applications that are pa
 To build your application as a FAP, create a folder with your app's source code in `applications_user`, then write its code the way you'd do when creating a regular built-in application. Then configure its `application.fam` manifest, and set its _apptype_ to FlipperAppType.EXTERNAL. See [Application Manifests](./AppManifests.md#application-definition) for more details.
 
 - To build your application, run `./fbt fap_{APPID}`, where APPID is your application's ID in its manifest.
-- To build your app and upload it over USB to run on Flipper, use `./fbt launch_app APPSRC=applications_user/path/to/app`. This command is configured in the default [VS Code profile](../.vscode/ReadMe.md) as a "Launch App on Flipper" build action (Ctrl+Shift+B menu).
+- To build your app and upload it over USB to run on Flipper, use `./fbt launch APPSRC=applications_user/path/to/app`. This command is configured in the default [VS Code profile](../.vscode/ReadMe.md) as a "Launch App on Flipper" build action (Ctrl+Shift+B menu).
+- To build an app without uploading it to Flipper, use `./fbt build APPSRC=applications_user/path/to/app`. This command is also availabe in VSCode configuration as "Build App".
 - To build all FAPs, run `./fbt faps` or `./fbt fap_dist`.
 
 ## FAP assets

firmware/targets/f18/api_symbols.csv

@@ -1,5 +1,5 @@
 entry,status,name,type,params
-Version,+,34.1,,
+Version,+,34.3,,
 Header,+,applications/services/bt/bt_service/bt.h,,
 Header,+,applications/services/cli/cli.h,,
 Header,+,applications/services/cli/cli_vcp.h,,
@@ -36,7 +36,6 @@ Header,+,applications/services/notification/notification_messages.h,,
 Header,+,applications/services/power/power_service/power.h,,
 Header,+,applications/services/rpc/rpc_app.h,,
 Header,+,applications/services/storage/storage.h,,
-Header,-,firmware/targets/f18/furi_hal/furi_hal_power_calibration.h,,
 Header,+,firmware/targets/f18/furi_hal/furi_hal_resources.h,,
 Header,+,firmware/targets/f18/furi_hal/furi_hal_spi_config.h,,
 Header,+,firmware/targets/f18/furi_hal/furi_hal_target_hw.h,,
@@ -82,6 +81,7 @@ Header,+,firmware/targets/furi_hal_include/furi_hal_usb_hid_u2f.h,,
 Header,+,firmware/targets/furi_hal_include/furi_hal_version.h,,
 Header,+,firmware/targets/furi_hal_include/furi_hal_vibro.h,,
 Header,+,lib/digital_signal/digital_signal.h,,
+Header,+,lib/drivers/cc1101_regs.h,,
 Header,+,lib/flipper_application/api_hashtable/api_hashtable.h,,
 Header,+,lib/flipper_application/api_hashtable/compilesort.hpp,,
 Header,+,lib/flipper_application/flipper_application.h,,
@@ -1147,6 +1147,7 @@ Function,-,furi_hal_power_insomnia_level,uint16_t,
 Function,+,furi_hal_power_is_charging,_Bool,
 Function,+,furi_hal_power_is_charging_done,_Bool,
 Function,+,furi_hal_power_is_otg_enabled,_Bool,
+Function,+,furi_hal_power_is_shutdown_requested,_Bool,
 Function,+,furi_hal_power_off,void,
 Function,+,furi_hal_power_reset,void,
 Function,+,furi_hal_power_set_battery_charge_voltage_limit,void,float

firmware/targets/f18/furi_hal/furi_hal_power_calibration.h

@@ -1,37 +0,0 @@
-const ParamCEDV cedv = {
-    .cedv_conf.gauge_conf =
-        {
-            .CCT = 1,
-            .CSYNC = 0,
-            .EDV_CMP = 0,
-            .SC = 1,
-            .FIXED_EDV0 = 1,
-            .FCC_LIM = 1,
-            .FC_FOR_VDQ = 1,
-            .IGNORE_SD = 1,
-            .SME0 = 0,
-        },
-    .full_charge_cap = 1300,
-    .design_cap = 1300,
-    .EDV0 = 3300,
-    .EDV1 = 3321,
-    .EDV2 = 3355,
-    .EMF = 3679,
-    .C0 = 430,
-    .C1 = 0,
-    .R1 = 408,
-    .R0 = 334,
-    .T0 = 4626,
-    .TC = 11,
-    .DOD0 = 4044,
-    .DOD10 = 3905,
-    .DOD20 = 3807,
-    .DOD30 = 3718,
-    .DOD40 = 3642,
-    .DOD50 = 3585,
-    .DOD60 = 3546,
-    .DOD70 = 3514,
-    .DOD80 = 3477,
-    .DOD90 = 3411,
-    .DOD100 = 3299,
-};

firmware/targets/f18/furi_hal/furi_hal_power_config.c

@@ -0,0 +1,149 @@
+#include <bq27220_data_memory.h>
+
+const BQ27220DMGaugingConfig furi_hal_power_gauge_data_memory_gauging_config = {
+    .CCT = 1,
+    .CSYNC = 0,
+    .EDV_CMP = 0,
+    .SC = 1,
+    .FIXED_EDV0 = 1,
+    .FCC_LIM = 1,
+    .FC_FOR_VDQ = 1,
+    .IGNORE_SD = 1,
+    .SME0 = 0,
+};
+
+const BQ27220DMData furi_hal_power_gauge_data_memory[] = {
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1GaugingConfig,
+        .type = BQ27220DMTypePtr16,
+        .value.u32 = (uint32_t)&furi_hal_power_gauge_data_memory_gauging_config,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1FullChargeCapacity,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 1300,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1DesignCapacity,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 1300,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1EMF,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3679,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1C0,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 430,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1R0,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 334,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1T0,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 4626,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1R1,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 408,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1TC,
+        .type = BQ27220DMTypeU8,
+        .value.u8 = 11,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1C1,
+        .type = BQ27220DMTypeU8,
+        .value.u8 = 0,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD0,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 4044,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD10,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3905,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD20,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3807,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD30,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3718,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD40,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3642,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD50,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3585,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD60,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3546,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD70,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3514,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD80,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3477,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD90,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3411,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD100,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3299,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1EDV0,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3300,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1EDV1,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3321,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1EDV2,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3355,
+    },
+    {
+        .address = BQ27220DMAddressCalibrationCurrentDeadband,
+        .type = BQ27220DMTypeU8,
+        .value.u8 = 1,
+    },
+    {
+        .address = BQ27220DMAddressConfigurationPowerSleepCurrent,
+        .type = BQ27220DMTypeI16,
+        .value.i16 = 1,
+    },
+    {
+        .type = BQ27220DMTypeEnd,
+    },
+};

firmware/targets/f7/api_symbols.csv

@@ -1,5 +1,6 @@
 entry,status,name,type,params
-Version,+,34.1,,
+Version,+,34.3,,
+Header,+,applications/drivers/subghz/cc1101_ext/cc1101_ext_interconnect.h,,
 Header,+,applications/services/bt/bt_service/bt.h,,
 Header,+,applications/services/cli/cli.h,,
 Header,+,applications/services/cli/cli_vcp.h,,
@@ -49,7 +50,6 @@ Header,+,firmware/targets/f7/furi_hal/furi_hal_idle_timer.h,,
 Header,+,firmware/targets/f7/furi_hal/furi_hal_interrupt.h,,
 Header,+,firmware/targets/f7/furi_hal/furi_hal_nfc.h,,
 Header,+,firmware/targets/f7/furi_hal/furi_hal_os.h,,
-Header,-,firmware/targets/f7/furi_hal/furi_hal_power_calibration.h,,
 Header,+,firmware/targets/f7/furi_hal/furi_hal_pwm.h,,
 Header,+,firmware/targets/f7/furi_hal/furi_hal_resources.h,,
 Header,+,firmware/targets/f7/furi_hal/furi_hal_rfid.h,,
@@ -87,6 +87,7 @@ Header,+,firmware/targets/furi_hal_include/furi_hal_usb_hid_u2f.h,,
 Header,+,firmware/targets/furi_hal_include/furi_hal_version.h,,
 Header,+,firmware/targets/furi_hal_include/furi_hal_vibro.h,,
 Header,+,lib/digital_signal/digital_signal.h,,
+Header,+,lib/drivers/cc1101_regs.h,,
 Header,+,lib/flipper_application/api_hashtable/api_hashtable.h,,
 Header,+,lib/flipper_application/api_hashtable/compilesort.hpp,,
 Header,+,lib/flipper_application/flipper_application.h,,
@@ -193,6 +194,7 @@ Header,+,lib/subghz/blocks/encoder.h,,
 Header,+,lib/subghz/blocks/generic.h,,
 Header,+,lib/subghz/blocks/math.h,,
 Header,+,lib/subghz/devices/cc1101_configs.h,,
+Header,+,lib/subghz/devices/cc1101_int/cc1101_int_interconnect.h,,
 Header,+,lib/subghz/environment.h,,
 Header,+,lib/subghz/protocols/raw.h,,
 Header,+,lib/subghz/receiver.h,,
@@ -1294,6 +1296,7 @@ Function,-,furi_hal_power_insomnia_level,uint16_t,
 Function,+,furi_hal_power_is_charging,_Bool,
 Function,+,furi_hal_power_is_charging_done,_Bool,
 Function,+,furi_hal_power_is_otg_enabled,_Bool,
+Function,+,furi_hal_power_is_shutdown_requested,_Bool,
 Function,+,furi_hal_power_off,void,
 Function,+,furi_hal_power_reset,void,
 Function,+,furi_hal_power_set_battery_charge_voltage_limit,void,float
@@ -2738,6 +2741,7 @@ Function,+,subghz_custom_btn_get_original,uint8_t,
 Function,+,subghz_custom_btn_is_allowed,_Bool,
 Function,+,subghz_custom_btn_set,_Bool,uint8_t
 Function,+,subghz_custom_btns_reset,void,
+Function,-,subghz_device_cc1101_ext_ep,const FlipperAppPluginDescriptor*,
 Function,+,subghz_devices_begin,_Bool,const SubGhzDevice*
 Function,+,subghz_devices_deinit,void,
 Function,+,subghz_devices_end,void,const SubGhzDevice*
@@ -3502,6 +3506,7 @@ Variable,+,sequence_set_vibro_on,const NotificationSequence,
 Variable,+,sequence_single_vibro,const NotificationSequence,
 Variable,+,sequence_solid_yellow,const NotificationSequence,
 Variable,+,sequence_success,const NotificationSequence,
+Variable,-,subghz_device_cc1101_int,const SubGhzDevice,
 Variable,+,subghz_device_cc1101_preset_2fsk_dev2_38khz_async_regs,const uint8_t[],
 Variable,+,subghz_device_cc1101_preset_2fsk_dev47_6khz_async_regs,const uint8_t[],
 Variable,+,subghz_device_cc1101_preset_gfsk_9_99kb_async_regs,const uint8_t[],

firmware/targets/f7/furi_hal/furi_hal_power.c

@@ -15,6 +15,7 @@
 
 #include <hw_conf.h>
 #include <bq27220.h>
+#include <bq27220_data_memory.h>
 #include <bq25896.h>
 
 #include <furi.h>
@@ -37,16 +38,18 @@ typedef struct {
     volatile uint8_t insomnia;
     volatile uint8_t suppress_charge;
 
-    uint8_t gauge_initialized;
+    bool gauge_ok;
-    uint8_t charger_initialized;
+    bool charger_ok;
 } FuriHalPower;
 
 static volatile FuriHalPower furi_hal_power = {
     .insomnia = 0,
     .suppress_charge = 0,
+    .gauge_ok = false,
+    .charger_ok = false,
 };
 
-#include <furi_hal_power_calibration.h>
+extern const BQ27220DMData furi_hal_power_gauge_data_memory[];
 
 void furi_hal_power_init() {
 #ifdef FURI_HAL_POWER_DEBUG
@@ -63,8 +66,13 @@ void furi_hal_power_init() {
     LL_C2_PWR_SetPowerMode(FURI_HAL_POWER_STOP_MODE);
 
     furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
-    bq27220_init(&furi_hal_i2c_handle_power, &cedv);
+    // Find and init gauge
-    bq25896_init(&furi_hal_i2c_handle_power);
+    if(bq27220_init(&furi_hal_i2c_handle_power)) {
+        furi_hal_power.gauge_ok = bq27220_apply_data_memory(
+            &furi_hal_i2c_handle_power, furi_hal_power_gauge_data_memory);
+    }
+    // Find and init charger
+    furi_hal_power.charger_ok = bq25896_init(&furi_hal_i2c_handle_power);
     furi_hal_i2c_release(&furi_hal_i2c_handle_power);
 
     FURI_LOG_I(TAG, "Init OK");
@@ -78,14 +86,29 @@ bool furi_hal_power_gauge_is_ok() {
 
     furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
 
-    if(bq27220_get_battery_status(&furi_hal_i2c_handle_power, &battery_status) == BQ27220_ERROR ||
+    if(!bq27220_get_battery_status(&furi_hal_i2c_handle_power, &battery_status) ||
-       bq27220_get_operation_status(&furi_hal_i2c_handle_power, &operation_status) ==
+       !bq27220_get_operation_status(&furi_hal_i2c_handle_power, &operation_status)) {
-           BQ27220_ERROR) {
         ret = false;
     } else {
         ret &= battery_status.BATTPRES;
         ret &= operation_status.INITCOMP;
-        ret &= (cedv.design_cap == bq27220_get_design_capacity(&furi_hal_i2c_handle_power));
+        ret &= furi_hal_power.gauge_ok;
+    }
+
+    furi_hal_i2c_release(&furi_hal_i2c_handle_power);
+
+    return ret;
+}
+
+bool furi_hal_power_is_shutdown_requested() {
+    bool ret = false;
+
+    BatteryStatus battery_status;
+
+    furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
+
+    if(bq27220_get_battery_status(&furi_hal_i2c_handle_power, &battery_status) != BQ27220_ERROR) {
+        ret = battery_status.SYSDWN;
     }
 
     furi_hal_i2c_release(&furi_hal_i2c_handle_power);
@@ -576,9 +599,8 @@ void furi_hal_power_debug_get(PropertyValueCallback out, void* context) {
 
     const uint32_t ntc_mpct = bq25896_get_ntc_mpct(&furi_hal_i2c_handle_power);
 
-    if(bq27220_get_battery_status(&furi_hal_i2c_handle_power, &battery_status) != BQ27220_ERROR &&
+    if(bq27220_get_battery_status(&furi_hal_i2c_handle_power, &battery_status) &&
-       bq27220_get_operation_status(&furi_hal_i2c_handle_power, &operation_status) !=
+       bq27220_get_operation_status(&furi_hal_i2c_handle_power, &operation_status)) {
-           BQ27220_ERROR) {
         property_value_out(&property_context, "%lu", 2, "charger", "ntc", ntc_mpct);
         property_value_out(&property_context, "%d", 2, "gauge", "calmd", operation_status.CALMD);
         property_value_out(&property_context, "%d", 2, "gauge", "sec", operation_status.SEC);

firmware/targets/f7/furi_hal/furi_hal_power_calibration.h

@@ -1,37 +0,0 @@
-const ParamCEDV cedv = {
-    .cedv_conf.gauge_conf =
-        {
-            .CCT = 1,
-            .CSYNC = 0,
-            .EDV_CMP = 0,
-            .SC = 1,
-            .FIXED_EDV0 = 1,
-            .FCC_LIM = 1,
-            .FC_FOR_VDQ = 1,
-            .IGNORE_SD = 1,
-            .SME0 = 0,
-        },
-    .full_charge_cap = 2101,
-    .design_cap = 2101,
-    .EDV0 = 3300,
-    .EDV1 = 3321,
-    .EDV2 = 3355,
-    .EMF = 3679,
-    .C0 = 430,
-    .C1 = 0,
-    .R1 = 408,
-    .R0 = 334,
-    .T0 = 4626,
-    .TC = 11,
-    .DOD0 = 4044,
-    .DOD10 = 3905,
-    .DOD20 = 3807,
-    .DOD30 = 3718,
-    .DOD40 = 3642,
-    .DOD50 = 3585,
-    .DOD60 = 3546,
-    .DOD70 = 3514,
-    .DOD80 = 3477,
-    .DOD90 = 3411,
-    .DOD100 = 3299,
-};

firmware/targets/f7/furi_hal/furi_hal_power_config.c

@@ -0,0 +1,149 @@
+#include <bq27220_data_memory.h>
+
+const BQ27220DMGaugingConfig furi_hal_power_gauge_data_memory_gauging_config = {
+    .CCT = 1,
+    .CSYNC = 0,
+    .EDV_CMP = 0,
+    .SC = 1,
+    .FIXED_EDV0 = 1,
+    .FCC_LIM = 1,
+    .FC_FOR_VDQ = 1,
+    .IGNORE_SD = 1,
+    .SME0 = 0,
+};
+
+const BQ27220DMData furi_hal_power_gauge_data_memory[] = {
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1GaugingConfig,
+        .type = BQ27220DMTypePtr16,
+        .value.u32 = (uint32_t)&furi_hal_power_gauge_data_memory_gauging_config,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1FullChargeCapacity,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 2100,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1DesignCapacity,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 2100,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1EMF,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3679,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1C0,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 430,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1R0,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 334,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1T0,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 4626,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1R1,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 408,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1TC,
+        .type = BQ27220DMTypeU8,
+        .value.u8 = 11,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1C1,
+        .type = BQ27220DMTypeU8,
+        .value.u8 = 0,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD0,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 4044,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD10,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3905,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD20,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3807,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD30,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3718,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD40,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3642,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD50,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3585,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD60,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3546,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD70,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3514,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD80,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3477,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD90,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3411,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1StartDOD100,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3299,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1EDV0,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3300,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1EDV1,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3321,
+    },
+    {
+        .address = BQ27220DMAddressGasGaugingCEDVProfile1EDV2,
+        .type = BQ27220DMTypeU16,
+        .value.u16 = 3355,
+    },
+    {
+        .address = BQ27220DMAddressCalibrationCurrentDeadband,
+        .type = BQ27220DMTypeU8,
+        .value.u8 = 1,
+    },
+    {
+        .address = BQ27220DMAddressConfigurationPowerSleepCurrent,
+        .type = BQ27220DMTypeI16,
+        .value.i16 = 1,
+    },
+    {
+        .type = BQ27220DMTypeEnd,
+    },
+};

firmware/targets/furi_hal_include/furi_hal_power.h

@@ -34,6 +34,12 @@ void furi_hal_power_init();
  */
 bool furi_hal_power_gauge_is_ok();
 
+/** Check if gauge requests system shutdown
+ * 
+ * @return true if system shutdown requested
+ */
+bool furi_hal_power_is_shutdown_requested();
+
 /** Get current insomnia level
  *
  * @return     insomnia level: 0 - no insomnia, >0 - insomnia, bearer count.

lib/drivers/SConscript

@@ -4,6 +4,9 @@ env.Append(
     CPPPATH=[
         "#/lib/drivers",
     ],
+    SDK_HEADERS=[
+        File("cc1101_regs.h"),
+    ],
 )
 
 

lib/drivers/bq25896.c

@@ -35,13 +35,15 @@ typedef struct {
 
 static bq25896_regs_t bq25896_regs;
 
-void bq25896_init(FuriHalI2cBusHandle* handle) {
+bool bq25896_init(FuriHalI2cBusHandle* handle) {
+    bool result = true;
+
     bq25896_regs.r14.REG_RST = 1;
-    furi_hal_i2c_write_reg_8(
+    result &= furi_hal_i2c_write_reg_8(
         handle, BQ25896_ADDRESS, 0x14, *(uint8_t*)&bq25896_regs.r14, BQ25896_I2C_TIMEOUT);
 
     // Readout all registers
-    furi_hal_i2c_read_mem(
+    result &= furi_hal_i2c_read_mem(
         handle,
         BQ25896_ADDRESS,
         0x00,
@@ -52,26 +54,28 @@ void bq25896_init(FuriHalI2cBusHandle* handle) {
     // Poll ADC forever
     bq25896_regs.r02.CONV_START = 1;
     bq25896_regs.r02.CONV_RATE = 1;
-    furi_hal_i2c_write_reg_8(
+    result &= furi_hal_i2c_write_reg_8(
         handle, BQ25896_ADDRESS, 0x02, *(uint8_t*)&bq25896_regs.r02, BQ25896_I2C_TIMEOUT);
 
     bq25896_regs.r07.WATCHDOG = WatchdogDisable;
-    furi_hal_i2c_write_reg_8(
+    result &= furi_hal_i2c_write_reg_8(
         handle, BQ25896_ADDRESS, 0x07, *(uint8_t*)&bq25896_regs.r07, BQ25896_I2C_TIMEOUT);
 
     // OTG power configuration
     bq25896_regs.r0A.BOOSTV = 0x8; // BOOST Voltage: 5.062V
     bq25896_regs.r0A.BOOST_LIM = BoostLim_1400; // BOOST Current limit: 1.4A
-    furi_hal_i2c_write_reg_8(
+    result &= furi_hal_i2c_write_reg_8(
         handle, BQ25896_ADDRESS, 0x0A, *(uint8_t*)&bq25896_regs.r0A, BQ25896_I2C_TIMEOUT);
 
-    furi_hal_i2c_read_mem(
+    result &= furi_hal_i2c_read_mem(
         handle,
         BQ25896_ADDRESS,
         0x00,
         (uint8_t*)&bq25896_regs,
         sizeof(bq25896_regs),
         BQ25896_I2C_TIMEOUT);
+
+    return result;
 }
 
 void bq25896_set_boost_lim(FuriHalI2cBusHandle* handle, BoostLim boost_lim) {

lib/drivers/bq25896.h

@@ -7,7 +7,7 @@
 #include <furi_hal_i2c.h>
 
 /** Initialize Driver */
-void bq25896_init(FuriHalI2cBusHandle* handle);
+bool bq25896_init(FuriHalI2cBusHandle* handle);
 
 /** Set boost lim*/
 void bq25896_set_boost_lim(FuriHalI2cBusHandle* handle, BoostLim boost_lim);

lib/drivers/bq27220.c

@@ -1,12 +1,16 @@
+
 #include "bq27220.h"
 #include "bq27220_reg.h"
+#include "bq27220_data_memory.h"
+
+_Static_assert(sizeof(BQ27220DMGaugingConfig) == 2, "Incorrect structure size");
 
 #include <furi.h>
 #include <stdbool.h>
 
 #define TAG "Gauge"
 
-uint16_t bq27220_read_word(FuriHalI2cBusHandle* handle, uint8_t address) {
+static uint16_t bq27220_read_word(FuriHalI2cBusHandle* handle, uint8_t address) {
     uint16_t buf = 0;
 
     furi_hal_i2c_read_mem(
@@ -15,14 +19,14 @@ uint16_t bq27220_read_word(FuriHalI2cBusHandle* handle, uint8_t address) {
     return buf;
 }
 
-bool bq27220_control(FuriHalI2cBusHandle* handle, uint16_t control) {
+static bool bq27220_control(FuriHalI2cBusHandle* handle, uint16_t control) {
     bool ret = furi_hal_i2c_write_mem(
         handle, BQ27220_ADDRESS, CommandControl, (uint8_t*)&control, 2, BQ27220_I2C_TIMEOUT);
 
     return ret;
 }
 
-uint8_t bq27220_get_checksum(uint8_t* data, uint16_t len) {
+static uint8_t bq27220_get_checksum(uint8_t* data, uint16_t len) {
     uint8_t ret = 0;
     for(uint16_t i = 0; i < len; i++) {
         ret += data[i];
@@ -30,80 +34,181 @@ uint8_t bq27220_get_checksum(uint8_t* data, uint16_t len) {
     return 0xFF - ret;
 }
 
-bool bq27220_set_parameter_u16(FuriHalI2cBusHandle* handle, uint16_t address, uint16_t value) {
+static bool bq27220_parameter_check(
-    bool ret;
+    FuriHalI2cBusHandle* handle,
-    uint8_t buffer[4];
+    uint16_t address,
+    uint32_t value,
+    size_t size,
+    bool update) {
+    furi_assert(size == 1 || size == 2 || size == 4);
+    bool ret = false;
+    uint8_t buffer[6] = {0};
+    uint8_t old_data[4] = {0};
 
-    buffer[0] = address & 0xFF;
+    do {
-    buffer[1] = (address >> 8) & 0xFF;
+        buffer[0] = address & 0xFF;
-    buffer[2] = (value >> 8) & 0xFF;
+        buffer[1] = (address >> 8) & 0xFF;
-    buffer[3] = value & 0xFF;
-    ret = furi_hal_i2c_write_mem(
-        handle, BQ27220_ADDRESS, CommandSelectSubclass, buffer, 4, BQ27220_I2C_TIMEOUT);
 
-    furi_delay_us(10000);
+        for(size_t i = 0; i < size; i++) {
+            buffer[1 + size - i] = (value >> (i * 8)) & 0xFF;
+        }
 
-    uint8_t checksum = bq27220_get_checksum(buffer, 4);
+        if(update) {
-    buffer[0] = checksum;
+            if(!furi_hal_i2c_write_mem(
-    buffer[1] = 6;
+                   handle,
-    ret &= furi_hal_i2c_write_mem(
+                   BQ27220_ADDRESS,
-        handle, BQ27220_ADDRESS, CommandMACDataSum, buffer, 2, BQ27220_I2C_TIMEOUT);
+                   CommandSelectSubclass,
+                   buffer,
+                   size + 2,
+                   BQ27220_I2C_TIMEOUT)) {
+                FURI_LOG_I(TAG, "DM write failed");
+                break;
+            }
+
+            furi_delay_us(10000);
+
+            uint8_t checksum = bq27220_get_checksum(buffer, size + 2);
+            buffer[0] = checksum;
+            buffer[1] = 4 + size; // TODO: why 4?
+            if(!furi_hal_i2c_write_mem(
+                   handle, BQ27220_ADDRESS, CommandMACDataSum, buffer, 2, BQ27220_I2C_TIMEOUT)) {
+                FURI_LOG_I(TAG, "CRC write failed");
+                break;
+            }
+
+            furi_delay_us(10000);
+            ret = true;
+        } else {
+            if(!furi_hal_i2c_write_mem(
+                   handle, BQ27220_ADDRESS, CommandSelectSubclass, buffer, 2, BQ27220_I2C_TIMEOUT)) {
+                FURI_LOG_I(TAG, "DM SelectSubclass for read failed");
+                break;
+            }
+
+            if(!furi_hal_i2c_rx(handle, BQ27220_ADDRESS, old_data, size, BQ27220_I2C_TIMEOUT)) {
+                FURI_LOG_I(TAG, "DM read failed");
+                break;
+            }
+
+            if(*(uint32_t*)&(old_data[0]) != *(uint32_t*)&(buffer[2])) {
+                FURI_LOG_W( //-V641
+                    TAG,
+                    "Data at 0x%04x(%zu): 0x%08lx!=0x%08lx",
+                    address,
+                    size,
+                    *(uint32_t*)&(old_data[0]),
+                    *(uint32_t*)&(buffer[2]));
+            } else {
+                ret = true;
+            }
+        }
+    } while(0);
 
-    furi_delay_us(10000);
     return ret;
 }
 
-bool bq27220_init(FuriHalI2cBusHandle* handle, const ParamCEDV* cedv) {
+static bool bq27220_data_memory_check(
-    uint32_t timeout = 100;
+    FuriHalI2cBusHandle* handle,
-    uint16_t design_cap = bq27220_get_design_capacity(handle);
+    const BQ27220DMData* data_memory,
-    if(cedv->design_cap == design_cap) {
+    bool update) {
-        FURI_LOG_I(TAG, "Skip battery profile update");
+    if(update) {
-        return true;
+        if(!bq27220_control(handle, Control_ENTER_CFG_UPDATE)) {
+            FURI_LOG_E(TAG, "ENTER_CFG_UPDATE command failed");
+            return false;
+        };
+
+        // Wait for enter CFG update mode
+        uint32_t timeout = 100;
+        OperationStatus status = {0};
+        while((status.CFGUPDATE != true) && (timeout-- > 0)) {
+            bq27220_get_operation_status(handle, &status);
+        }
+
+        if(timeout == 0) {
+            FURI_LOG_E(TAG, "CFGUPDATE mode failed");
+            return false;
+        }
     }
-    FURI_LOG_I(TAG, "Start updating battery profile");
+
-    OperationStatus status = {0};
+    // Process data memory records
-    if(!bq27220_control(handle, Control_ENTER_CFG_UPDATE)) {
+    bool result = true;
-        FURI_LOG_E(TAG, "Can't configure update");
+    while(data_memory->type != BQ27220DMTypeEnd) {
+        if(data_memory->type == BQ27220DMTypeWait) {
+            furi_delay_us(data_memory->value.u32);
+        } else if(data_memory->type == BQ27220DMTypeU8) {
+            result &= bq27220_parameter_check(
+                handle, data_memory->address, data_memory->value.u8, 1, update);
+        } else if(data_memory->type == BQ27220DMTypeU16) {
+            result &= bq27220_parameter_check(
+                handle, data_memory->address, data_memory->value.u16, 2, update);
+        } else if(data_memory->type == BQ27220DMTypeU32) {
+            result &= bq27220_parameter_check(
+                handle, data_memory->address, data_memory->value.u32, 4, update);
+        } else if(data_memory->type == BQ27220DMTypeI8) {
+            result &= bq27220_parameter_check(
+                handle, data_memory->address, data_memory->value.i8, 1, update);
+        } else if(data_memory->type == BQ27220DMTypeI16) {
+            result &= bq27220_parameter_check(
+                handle, data_memory->address, data_memory->value.i16, 2, update);
+        } else if(data_memory->type == BQ27220DMTypeI32) {
+            result &= bq27220_parameter_check(
+                handle, data_memory->address, data_memory->value.i32, 4, update);
+        } else if(data_memory->type == BQ27220DMTypeF32) {
+            result &= bq27220_parameter_check(
+                handle, data_memory->address, data_memory->value.u32, 4, update);
+        } else if(data_memory->type == BQ27220DMTypePtr8) {
+            result &= bq27220_parameter_check(
+                handle, data_memory->address, *(uint8_t*)data_memory->value.u32, 1, update);
+        } else if(data_memory->type == BQ27220DMTypePtr16) {
+            result &= bq27220_parameter_check(
+                handle, data_memory->address, *(uint16_t*)data_memory->value.u32, 2, update);
+        } else if(data_memory->type == BQ27220DMTypePtr32) {
+            result &= bq27220_parameter_check(
+                handle, data_memory->address, *(uint32_t*)data_memory->value.u32, 4, update);
+        } else {
+            furi_crash("Invalid DM Type");
+        }
+        data_memory++;
+    }
+
+    // Finalize configuration update
+    if(update) {
+        bq27220_control(handle, Control_EXIT_CFG_UPDATE_REINIT);
+        furi_delay_us(10000);
+    }
+
+    return result;
+}
+
+bool bq27220_init(FuriHalI2cBusHandle* handle) {
+    // Request device number(chip PN)
+    if(!bq27220_control(handle, Control_DEVICE_NUMBER)) {
+        FURI_LOG_E(TAG, "Device is not present");
+        return false;
+    };
+    // Check control response
+    uint16_t data = 0;
+    data = bq27220_read_word(handle, CommandControl);
+    if(data != 0xFF00) {
+        FURI_LOG_E(TAG, "Invalid control response: %x", data);
         return false;
     };
 
-    while((status.CFGUPDATE != true) && (timeout-- > 0)) {
+    data = bq27220_read_word(handle, CommandMACData);
-        bq27220_get_operation_status(handle, &status);
+    FURI_LOG_I(TAG, "Device Number %04x", data);
-    }
-    bq27220_set_parameter_u16(handle, AddressGaugingConfig, cedv->cedv_conf.gauge_conf_raw);
-    bq27220_set_parameter_u16(handle, AddressFullChargeCapacity, cedv->full_charge_cap);
-    bq27220_set_parameter_u16(handle, AddressDesignCapacity, cedv->design_cap);
-    bq27220_set_parameter_u16(handle, AddressEMF, cedv->EMF);
-    bq27220_set_parameter_u16(handle, AddressC0, cedv->C0);
-    bq27220_set_parameter_u16(handle, AddressR0, cedv->R0);
-    bq27220_set_parameter_u16(handle, AddressT0, cedv->T0);
-    bq27220_set_parameter_u16(handle, AddressR1, cedv->R1);
-    bq27220_set_parameter_u16(handle, AddressTC, (cedv->TC) << 8 | cedv->C1);
-    bq27220_set_parameter_u16(handle, AddressStartDOD0, cedv->DOD0);
-    bq27220_set_parameter_u16(handle, AddressStartDOD10, cedv->DOD10);
-    bq27220_set_parameter_u16(handle, AddressStartDOD20, cedv->DOD20);
-    bq27220_set_parameter_u16(handle, AddressStartDOD30, cedv->DOD30);
-    bq27220_set_parameter_u16(handle, AddressStartDOD40, cedv->DOD40);
-    bq27220_set_parameter_u16(handle, AddressStartDOD50, cedv->DOD40);
-    bq27220_set_parameter_u16(handle, AddressStartDOD60, cedv->DOD60);
-    bq27220_set_parameter_u16(handle, AddressStartDOD70, cedv->DOD70);
-    bq27220_set_parameter_u16(handle, AddressStartDOD80, cedv->DOD80);
-    bq27220_set_parameter_u16(handle, AddressStartDOD90, cedv->DOD90);
-    bq27220_set_parameter_u16(handle, AddressStartDOD100, cedv->DOD100);
-    bq27220_set_parameter_u16(handle, AddressEDV0, cedv->EDV0);
-    bq27220_set_parameter_u16(handle, AddressEDV1, cedv->EDV1);
-    bq27220_set_parameter_u16(handle, AddressEDV2, cedv->EDV2);
 
-    bq27220_control(handle, Control_EXIT_CFG_UPDATE_REINIT);
+    return data == 0x0220;
-    furi_delay_us(10000);
+}
-    design_cap = bq27220_get_design_capacity(handle);
+
-    if(cedv->design_cap == design_cap) {
+bool bq27220_apply_data_memory(FuriHalI2cBusHandle* handle, const BQ27220DMData* data_memory) {
-        FURI_LOG_I(TAG, "Battery profile update success");
+    FURI_LOG_I(TAG, "Verifying data memory");
-        return true;
+    if(!bq27220_data_memory_check(handle, data_memory, false)) {
-    } else {
+        FURI_LOG_I(TAG, "Updating data memory");
-        FURI_LOG_E(TAG, "Battery profile update failed");
+        bq27220_data_memory_check(handle, data_memory, true);
-        return false;
     }
+    FURI_LOG_I(TAG, "Data memory verification complete");
+
+    return true;
 }
 
 uint16_t bq27220_get_voltage(FuriHalI2cBusHandle* handle) {
@@ -114,24 +219,23 @@ int16_t bq27220_get_current(FuriHalI2cBusHandle* handle) {
     return bq27220_read_word(handle, CommandCurrent);
 }
 
-uint8_t bq27220_get_battery_status(FuriHalI2cBusHandle* handle, BatteryStatus* battery_status) {
+bool bq27220_get_battery_status(FuriHalI2cBusHandle* handle, BatteryStatus* battery_status) {
     uint16_t data = bq27220_read_word(handle, CommandBatteryStatus);
     if(data == BQ27220_ERROR) {
-        return BQ27220_ERROR;
+        return false;
     } else {
         *(uint16_t*)battery_status = data;
-        return BQ27220_SUCCESS;
+        return true;
     }
 }
 
-uint8_t
+bool bq27220_get_operation_status(FuriHalI2cBusHandle* handle, OperationStatus* operation_status) {
-    bq27220_get_operation_status(FuriHalI2cBusHandle* handle, OperationStatus* operation_status) {
     uint16_t data = bq27220_read_word(handle, CommandOperationStatus);
     if(data == BQ27220_ERROR) {
-        return BQ27220_ERROR;
+        return false;
     } else {
         *(uint16_t*)operation_status = data;
-        return BQ27220_SUCCESS;
+        return true;
     }
 }
 

lib/drivers/bq27220.h

@@ -47,60 +47,17 @@ typedef struct {
 
 _Static_assert(sizeof(OperationStatus) == 2, "Incorrect structure size");
 
-typedef struct {
+typedef struct BQ27220DMData BQ27220DMData;
-    // Low byte, Low bit first
-    bool CCT : 1;
-    bool CSYNC : 1;
-    bool RSVD0 : 1;
-    bool EDV_CMP : 1;
-    bool SC : 1;
-    bool FIXED_EDV0 : 1;
-    uint8_t RSVD1 : 2;
-    // High byte, Low bit first
-    bool FCC_LIM : 1;
-    bool RSVD2 : 1;
-    bool FC_FOR_VDQ : 1;
-    bool IGNORE_SD : 1;
-    bool SME0 : 1;
-    uint8_t RSVD3 : 3;
-} GaugingConfig;
-
-_Static_assert(sizeof(GaugingConfig) == 2, "Incorrect structure size");
-
-typedef struct {
-    union {
-        GaugingConfig gauge_conf;
-        uint16_t gauge_conf_raw;
-    } cedv_conf;
-    uint16_t full_charge_cap;
-    uint16_t design_cap;
-    uint16_t EDV0;
-    uint16_t EDV1;
-    uint16_t EDV2;
-    uint16_t EMF;
-    uint16_t C0;
-    uint16_t R0;
-    uint16_t T0;
-    uint16_t R1;
-    uint8_t TC;
-    uint8_t C1;
-    uint16_t DOD0;
-    uint16_t DOD10;
-    uint16_t DOD20;
-    uint16_t DOD30;
-    uint16_t DOD40;
-    uint16_t DOD50;
-    uint16_t DOD60;
-    uint16_t DOD70;
-    uint16_t DOD80;
-    uint16_t DOD90;
-    uint16_t DOD100;
-} ParamCEDV;
 
 /** Initialize Driver
  * @return true on success, false otherwise
  */
-bool bq27220_init(FuriHalI2cBusHandle* handle, const ParamCEDV* cedv);
+bool bq27220_init(FuriHalI2cBusHandle* handle);
+
+/** Initialize Driver
+ * @return true on success, false otherwise
+ */
+bool bq27220_apply_data_memory(FuriHalI2cBusHandle* handle, const BQ27220DMData* data_memory);
 
 /** Get battery voltage in mV or error */
 uint16_t bq27220_get_voltage(FuriHalI2cBusHandle* handle);
@@ -109,11 +66,10 @@ uint16_t bq27220_get_voltage(FuriHalI2cBusHandle* handle);
 int16_t bq27220_get_current(FuriHalI2cBusHandle* handle);
 
 /** Get battery status */
-uint8_t bq27220_get_battery_status(FuriHalI2cBusHandle* handle, BatteryStatus* battery_status);
+bool bq27220_get_battery_status(FuriHalI2cBusHandle* handle, BatteryStatus* battery_status);
 
 /** Get operation status */
-uint8_t
+bool bq27220_get_operation_status(FuriHalI2cBusHandle* handle, OperationStatus* operation_status);
-    bq27220_get_operation_status(FuriHalI2cBusHandle* handle, OperationStatus* operation_status);
 
 /** Get temperature in units of 0.1°K */
 uint16_t bq27220_get_temperature(FuriHalI2cBusHandle* handle);

lib/drivers/bq27220_data_memory.h

@@ -0,0 +1,84 @@
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef enum {
+    BQ27220DMTypeEnd,
+    BQ27220DMTypeWait,
+    BQ27220DMTypeU8,
+    BQ27220DMTypeU16,
+    BQ27220DMTypeU32,
+    BQ27220DMTypeI8,
+    BQ27220DMTypeI16,
+    BQ27220DMTypeI32,
+    BQ27220DMTypeF32,
+    BQ27220DMTypePtr8,
+    BQ27220DMTypePtr16,
+    BQ27220DMTypePtr32,
+} BQ27220DMType;
+
+typedef enum {
+    BQ27220DMAddressGasGaugingCEDVProfile1GaugingConfig = 0x929B,
+    BQ27220DMAddressGasGaugingCEDVProfile1FullChargeCapacity = 0x929D,
+    BQ27220DMAddressGasGaugingCEDVProfile1DesignCapacity = 0x929F,
+    BQ27220DMAddressGasGaugingCEDVProfile1EMF = 0x92A3,
+    BQ27220DMAddressGasGaugingCEDVProfile1C0 = 0x92A9,
+    BQ27220DMAddressGasGaugingCEDVProfile1R0 = 0x92AB,
+    BQ27220DMAddressGasGaugingCEDVProfile1T0 = 0x92AD,
+    BQ27220DMAddressGasGaugingCEDVProfile1R1 = 0x92AF,
+    BQ27220DMAddressGasGaugingCEDVProfile1TC = 0x92B1,
+    BQ27220DMAddressGasGaugingCEDVProfile1C1 = 0x92B2,
+    BQ27220DMAddressGasGaugingCEDVProfile1EDV0 = 0x92B4,
+    BQ27220DMAddressGasGaugingCEDVProfile1EDV1 = 0x92B7,
+    BQ27220DMAddressGasGaugingCEDVProfile1EDV2 = 0x92BA,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD0 = 0x92BD,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD10 = 0x92BF,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD20 = 0x92C1,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD30 = 0x92C3,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD40 = 0x92C5,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD50 = 0x92C7,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD60 = 0x92C9,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD70 = 0x92CB,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD80 = 0x92CD,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD90 = 0x92CF,
+    BQ27220DMAddressGasGaugingCEDVProfile1StartDOD100 = 0x92D1,
+    BQ27220DMAddressCalibrationCurrentDeadband = 0x91DE,
+    BQ27220DMAddressConfigurationPowerSleepCurrent = 0x9217,
+    BQ27220DMAddressConfigurationCurrentThresholdsDischargeDetectionThreshold = 0x9228,
+    BQ27220DMAddressConfigurationDataInitialStandby = 0x923C,
+} BQ27220DMAddress;
+
+typedef struct BQ27220DMData BQ27220DMData;
+
+struct BQ27220DMData {
+    uint16_t type;
+    uint16_t address;
+    union {
+        uint8_t u8;
+        uint16_t u16;
+        uint32_t u32;
+        int8_t i8;
+        int16_t i16;
+        int32_t i32;
+        float f32;
+    } value;
+};
+
+typedef struct {
+    // Low byte, Low bit first
+    const bool CCT : 1;
+    const bool CSYNC : 1;
+    const bool RSVD0 : 1;
+    const bool EDV_CMP : 1;
+    const bool SC : 1;
+    const bool FIXED_EDV0 : 1;
+    const uint8_t RSVD1 : 2;
+    // High byte, Low bit first
+    const bool FCC_LIM : 1;
+    const bool RSVD2 : 1;
+    const bool FC_FOR_VDQ : 1;
+    const bool IGNORE_SD : 1;
+    const bool SME0 : 1;
+    const uint8_t RSVD3 : 3;
+} BQ27220DMGaugingConfig;

lib/drivers/bq27220_reg.h

@@ -66,28 +66,3 @@
 #define Control_EXIT_CFG_UPDATE_REINIT 0x0091
 #define Control_EXIT_CFG_UPDATE 0x0092
 #define Control_RETURN_TO_ROM 0x0F00
-
-#define AddressGaugingConfig 0x929B
-#define AddressFullChargeCapacity 0x929D
-#define AddressDesignCapacity 0x929F
-#define AddressEMF 0x92A3
-#define AddressC0 0x92A9
-#define AddressR0 0x92AB
-#define AddressT0 0x92AD
-#define AddressR1 0x92AF
-#define AddressTC 0x92B1
-#define AddressC1 0x92B2
-#define AddressEDV0 0x92B4
-#define AddressEDV1 0x92B7
-#define AddressEDV2 0x92BA
-#define AddressStartDOD0 0x92BD
-#define AddressStartDOD10 0x92BF
-#define AddressStartDOD20 0x92C1
-#define AddressStartDOD30 0x92C3
-#define AddressStartDOD40 0x92C5
-#define AddressStartDOD50 0x92C7
-#define AddressStartDOD60 0x92C9
-#define AddressStartDOD70 0x92CB
-#define AddressStartDOD80 0x92CD
-#define AddressStartDOD90 0x92CF
-#define AddressStartDOD100 0x92D1

lib/subghz/SConscript

@@ -22,6 +22,7 @@ env.Append(
         File("subghz_setting.h"),
         File("subghz_protocol_registry.h"),
         File("devices/cc1101_configs.h"),
+        File("devices/cc1101_int/cc1101_int_interconnect.h"),
     ],
 )
 

scripts/fbt/appmanifest.py

@@ -325,7 +325,13 @@ class AppBuildset:
     def get_sdk_headers(self):
         sdk_headers = []
         for app in self.apps:
-            sdk_headers.extend([app._appdir.File(header) for header in app.sdk_headers])
+            sdk_headers.extend(
+                [
+                    src._appdir.File(header)
+                    for src in [app, *app._plugins]
+                    for header in src.sdk_headers
+                ]
+            )
         return sdk_headers
 
     def get_apps_of_type(self, apptype: FlipperAppType, all_known: bool = False):

scripts/fbt_tools/fbt_extapps.py

@@ -3,7 +3,7 @@ import os
 import pathlib
 import shutil
 from dataclasses import dataclass, field
-from typing import Optional
+from typing import Optional, Dict, List
 
 import SCons.Warnings
 from ansi.color import fg
@@ -400,22 +400,26 @@ def generate_embed_app_metadata_actions(source, target, env, for_signature):
     return Action(actions)
 
 
-def AddAppLaunchTarget(env, appname, launch_target_name):
+@dataclass
-    deploy_sources, flipp_dist_paths, validators = [], [], []
+class AppDeploymentComponents:
-    run_script_extra_ars = ""
+    deploy_sources: Dict[str, object] = field(default_factory=dict)
+    validators: List[object] = field(default_factory=list)
+    extra_launch_args: str = ""
 
-    def _add_dist_targets(app_artifacts):
+    def add_app(self, app_artifacts):
-        validators.append(app_artifacts.validator)
         for _, ext_path in app_artifacts.dist_entries:
-            deploy_sources.append(app_artifacts.compact)
+            self.deploy_sources[f"/ext/{ext_path}"] = app_artifacts.compact
-            flipp_dist_paths.append(f"/ext/{ext_path}")
+        self.validators.append(app_artifacts.validator)
-        return app_artifacts
+
+
+def _gather_app_components(env, appname) -> AppDeploymentComponents:
+    components = AppDeploymentComponents()
 
     def _add_host_app_to_targets(host_app):
         artifacts_app_to_run = env["EXT_APPS"].get(host_app.appid, None)
-        _add_dist_targets(artifacts_app_to_run)
+        components.add_app(artifacts_app_to_run)
         for plugin in host_app._plugins:
-            _add_dist_targets(env["EXT_APPS"].get(plugin.appid, None))
+            components.add_app(env["EXT_APPS"].get(plugin.appid, None))
 
     artifacts_app_to_run = env.GetExtAppByIdOrPath(appname)
     if artifacts_app_to_run.app.apptype == FlipperAppType.PLUGIN:
@@ -427,25 +431,35 @@ def AddAppLaunchTarget(env, appname, launch_target_name):
                 FlipperAppType.EXTERNAL,
                 FlipperAppType.MENUEXTERNAL,
             ]:
-                _add_host_app_to_targets(host_app)
+                components.add_app(host_app)
             else:
                 # host app is a built-in app
-                run_script_extra_ars = f"-a {host_app.name}"
+                components.add_app(artifacts_app_to_run)
-                _add_dist_targets(artifacts_app_to_run)
+                components.extra_launch_args = f"-a {host_app.name}"
         else:
             raise UserError("Host app is unknown")
     else:
         _add_host_app_to_targets(artifacts_app_to_run.app)
+    return components
 
-    # print(deploy_sources, flipp_dist_paths)
+
-    env.PhonyTarget(
+def AddAppLaunchTarget(env, appname, launch_target_name):
+    components = _gather_app_components(env, appname)
+    target = env.PhonyTarget(
         launch_target_name,
         '${PYTHON3} "${APP_RUN_SCRIPT}" -p ${FLIP_PORT} ${EXTRA_ARGS} -s ${SOURCES} -t ${FLIPPER_FILE_TARGETS}',
-        source=deploy_sources,
+        source=components.deploy_sources.values(),
-        FLIPPER_FILE_TARGETS=flipp_dist_paths,
+        FLIPPER_FILE_TARGETS=components.deploy_sources.keys(),
-        EXTRA_ARGS=run_script_extra_ars,
+        EXTRA_ARGS=components.extra_launch_args,
     )
-    env.Alias(launch_target_name, validators)
+    env.Alias(launch_target_name, components.validators)
+    return target
+
+
+def AddAppBuildTarget(env, appname, build_target_name):
+    components = _gather_app_components(env, appname)
+    env.Alias(build_target_name, components.validators)
+    env.Alias(build_target_name, components.deploy_sources.values())
 
 
 def generate(env, **kw):
@@ -474,6 +488,7 @@ def generate(env, **kw):
     env.AddMethod(BuildAppElf)
     env.AddMethod(GetExtAppByIdOrPath)
     env.AddMethod(AddAppLaunchTarget)
+    env.AddMethod(AddAppBuildTarget)
 
     env.Append(
         BUILDERS={

scripts/fbt_tools/fbt_help.py

@@ -4,16 +4,17 @@ targets_help = """Configuration variables:
 tail_help = """
 
 TASKS:
-Building:
+Firmware & apps:
     firmware_all, fw_dist:
         Build firmware; create distribution package
     faps, fap_dist:
         Build all FAP apps
-    fap_{APPID}, launch_app APPSRC={APPID}:
+    fap_{APPID}, build APPSRC={APPID}; launch APPSRC={APPID}:
         Build FAP app with appid={APPID}; upload & start it over USB
     fap_deploy:
         Build and upload all FAP apps over USB
     
+
 Flashing & debugging:
     flash, flash_blackmagic, jflash:
         Flash firmware to target using debug probe

scripts/ufbt/SConstruct

@@ -336,8 +336,10 @@ def ambiguous_app_call(**kw):
 
 if app_to_launch:
     appenv.AddAppLaunchTarget(app_to_launch, "launch")
+    appenv.AddAppBuildTarget(app_to_launch, "build")
 else:
     dist_env.PhonyTarget("launch", Action(ambiguous_app_call, None))
+    dist_env.PhonyTarget("build", Action(ambiguous_app_call, None))
 
 # cli handler
 

site_scons/extapps.scons

@@ -114,8 +114,20 @@ extapps.resources_dist = appenv.FapDist(appenv["RESOURCES_ROOT"], [])
 
 
 if appsrc := appenv.subst("$APPSRC"):
-    appenv.AddAppLaunchTarget(appsrc, "launch_app")
+    launch_target = appenv.AddAppLaunchTarget(appsrc, "launch")
+    Alias("launch_app", launch_target)
+    appenv.PhonyTarget(
+        "launch_app",
+        Action(
+            lambda **kw: warn(
+                WarningOnByDefault,
+                "The 'launch_app' target is deprecated. Use 'launch' instead.",
+            ),
+            None,
+        ),
+    )
 
+    appenv.AddAppBuildTarget(appsrc, "build")
 
 # SDK management