From fb8aeaa28b07aa9728ac1c916e96d89785f529c3 Mon Sep 17 00:00:00 2001 From: EncryptedFeta <80881911+EncryptedFeta@users.noreply.github.com> Date: Wed, 4 Jan 2023 19:08:25 -0600 Subject: [PATCH 1/3] Update README.md --- assets/resources/subghz/assets/README.md | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-) diff --git a/assets/resources/subghz/assets/README.md b/assets/resources/subghz/assets/README.md index c9101dfc0..ca6016e30 100644 --- a/assets/resources/subghz/assets/README.md +++ b/assets/resources/subghz/assets/README.md @@ -1,20 +1,10 @@ -# Adding additional frequencies (TX/RX) [By UberGuidoZ](https://github.com/UberGuidoZ/Flipper/blob/main/Sub-GHz/Settings/ReadMe.md) +#Sub-Ghz Frequencies in Xtreme -Some changes I made to the available frequency settings (including unlocking them all). The file is found here: +Officially supported frequencies: 300-348 MHz, 387-464 MHz, and 779-928 MHz (from [CC1101 chip docs](https://www.ti.com/product/CC1101)) +Unofficially supported frequencies: 281-361 MHz, 378-481 MHz, and 749-962 MHz (from [YARD Stick One/CC1111 Docs](https://greatscottgadgets.com/yardstickone/)) -![Sub-Ghz_Changes](https://user-images.githubusercontent.com/57457139/174948988-f6955976-2318-4e3e-b658-93f0465bb22e.png) +Currently no other Flipper firmware allows anything outside of the officially supported CC1101 specs without editing files that get overwritten with every update. +Xtreme has these frequencies enabled by default. -Officially supported frequencies: 300-348 MHz, 387-464 MHz, and 779-928 MHz (from [CC1101 chip docs](https://www.ti.com/product/CC1101))
-Unofficially supported frequencies: 281-361 MHz, 378-481 MHz, and 749-962 MHz (from [YARD Stick One](https://greatscottgadgets.com/yardstickone/) CC1111 docs) - -Official & Unleashed currently do not allow anything outside of the officially supported CC1101 specs. -RogueMaster allows unofficially supported frequencies with the extend_range.txt file - -**NOTE: Going outside the supported frequencies may DAMAGE YOUR FLIPPER AMP.
-Please understand what you're doing if trying to break out of official frequencies.** - -You'll need to edit the [extended range file](https://github.com/ClaraCrazy/Flipper-Xtreme/blob/main/documentation/DangerousSettings.md) to enable frequencies outside of the Official above. - -# CAUTION within 402-408 range!
Medical devices can operate here. - -This range is purposefully not included in my file above. +**NOTE: Operating outside the supported frequencies can damage your amp and may not provide the same results as supported frequencies.
+Please understand what you're doing if you transmit on unsupported frequencies as medical devices are licensed to operate there.** From 2c1bda3e9544e810cf43867c9d2cccb8df12bcf6 Mon Sep 17 00:00:00 2001 From: EncryptedFeta <80881911+EncryptedFeta@users.noreply.github.com> Date: Wed, 4 Jan 2023 19:09:45 -0600 Subject: [PATCH 2/3] Update README.md --- assets/resources/subghz/assets/README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/assets/resources/subghz/assets/README.md b/assets/resources/subghz/assets/README.md index ca6016e30..1bf9324b8 100644 --- a/assets/resources/subghz/assets/README.md +++ b/assets/resources/subghz/assets/README.md @@ -1,10 +1,10 @@ #Sub-Ghz Frequencies in Xtreme -Officially supported frequencies: 300-348 MHz, 387-464 MHz, and 779-928 MHz (from [CC1101 chip docs](https://www.ti.com/product/CC1101)) +Officially supported frequencies: 300-348 MHz, 387-464 MHz, and 779-928 MHz (from [CC1101 chip docs](https://www.ti.com/product/CC1101))
Unofficially supported frequencies: 281-361 MHz, 378-481 MHz, and 749-962 MHz (from [YARD Stick One/CC1111 Docs](https://greatscottgadgets.com/yardstickone/)) Currently no other Flipper firmware allows anything outside of the officially supported CC1101 specs without editing files that get overwritten with every update. Xtreme has these frequencies enabled by default. -**NOTE: Operating outside the supported frequencies can damage your amp and may not provide the same results as supported frequencies.
+**NOTE: Operating outside supported frequencies can damage your amp and may not provide the same results as supported frequencies.
Please understand what you're doing if you transmit on unsupported frequencies as medical devices are licensed to operate there.** From 1d5d5c9180a9f198379ebf041f9be268755a63c5 Mon Sep 17 00:00:00 2001 From: EncryptedFeta <80881911+EncryptedFeta@users.noreply.github.com> Date: Wed, 4 Jan 2023 19:30:44 -0600 Subject: [PATCH 3/3] Update README.md --- assets/resources/subghz/assets/README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/assets/resources/subghz/assets/README.md b/assets/resources/subghz/assets/README.md index 1bf9324b8..b129906e6 100644 --- a/assets/resources/subghz/assets/README.md +++ b/assets/resources/subghz/assets/README.md @@ -4,7 +4,7 @@ Officially supported frequencies: 300-348 MHz, 387-464 MHz, and 779-928 MHz (fro Unofficially supported frequencies: 281-361 MHz, 378-481 MHz, and 749-962 MHz (from [YARD Stick One/CC1111 Docs](https://greatscottgadgets.com/yardstickone/)) Currently no other Flipper firmware allows anything outside of the officially supported CC1101 specs without editing files that get overwritten with every update. -Xtreme has these frequencies enabled by default. +Xtreme has these frequencies enabled by default and regional restrictions disabled. **NOTE: Operating outside supported frequencies can damage your amp and may not provide the same results as supported frequencies.
Please understand what you're doing if you transmit on unsupported frequencies as medical devices are licensed to operate there.**