diff --git a/firmware/targets/f7/api_symbols.csv b/firmware/targets/f7/api_symbols.csv
index 8ed3259fa..3cc1c5c94 100644
--- a/firmware/targets/f7/api_symbols.csv
+++ b/firmware/targets/f7/api_symbols.csv
@@ -1146,23 +1146,13 @@ Function,+,furi_hal_i2c_tx,_Bool,"FuriHalI2cBusHandle*, const uint8_t, const uin
 Function,+,furi_hal_i2c_write_mem,_Bool,"FuriHalI2cBusHandle*, uint8_t, uint8_t, uint8_t*, uint8_t, uint32_t"
 Function,+,furi_hal_i2c_write_reg_16,_Bool,"FuriHalI2cBusHandle*, uint8_t, uint8_t, uint16_t, uint32_t"
 Function,+,furi_hal_i2c_write_reg_8,_Bool,"FuriHalI2cBusHandle*, uint8_t, uint8_t, uint8_t, uint32_t"
-Function,+,furi_hal_ibutton_add_interrupt,void,"GpioExtiCallback, void*"
 Function,+,furi_hal_ibutton_emulate_set_next,void,uint32_t
 Function,+,furi_hal_ibutton_emulate_start,void,"uint32_t, FuriHalIbuttonEmulateCallback, void*"
 Function,+,furi_hal_ibutton_emulate_stop,void,
 Function,-,furi_hal_ibutton_init,void,
 Function,+,furi_hal_ibutton_pin_configure,void,
-Function,+,furi_hal_ibutton_pin_get_level,_Bool,
-Function,+,furi_hal_ibutton_pin_high,void,
-Function,+,furi_hal_ibutton_pin_low,void,
 Function,+,furi_hal_ibutton_pin_reset,void,
 Function,+,furi_hal_ibutton_pin_write,void,const _Bool
-Function,+,furi_hal_ibutton_remove_interrupt,void,
-Function,+,furi_hal_ibutton_start_drive,void,
-Function,+,furi_hal_ibutton_start_drive_in_isr,void,
-Function,+,furi_hal_ibutton_start_interrupt,void,
-Function,+,furi_hal_ibutton_start_interrupt_in_isr,void,
-Function,+,furi_hal_ibutton_stop,void,
 Function,+,furi_hal_info_get,void,"PropertyValueCallback, char, void*"
 Function,+,furi_hal_infrared_async_rx_set_capture_isr_callback,void,"FuriHalInfraredRxCaptureCallback, void*"
 Function,+,furi_hal_infrared_async_rx_set_timeout,void,uint32_t
diff --git a/firmware/targets/f7/furi_hal/furi_hal_ibutton.c b/firmware/targets/f7/furi_hal/furi_hal_ibutton.c
index 3afb52418..c05cd69a8 100644
--- a/firmware/targets/f7/furi_hal/furi_hal_ibutton.c
+++ b/firmware/targets/f7/furi_hal/furi_hal_ibutton.c
@@ -89,51 +89,6 @@ void furi_hal_ibutton_emulate_stop() {
     }
 }
 
-void furi_hal_ibutton_start_drive() {
-    furi_hal_ibutton_pin_high();
-    furi_hal_gpio_init(&ibutton_gpio, GpioModeOutputOpenDrain, GpioPullNo, GpioSpeedLow);
-}
-
-void furi_hal_ibutton_start_drive_in_isr() {
-    furi_hal_gpio_init(&ibutton_gpio, GpioModeOutputOpenDrain, GpioPullNo, GpioSpeedLow);
-    LL_EXTI_ClearFlag_0_31(ibutton_gpio.pin);
-}
-
-void furi_hal_ibutton_start_interrupt() {
-    furi_hal_ibutton_pin_high();
-    furi_hal_gpio_init(&ibutton_gpio, GpioModeInterruptRiseFall, GpioPullNo, GpioSpeedLow);
-}
-
-void furi_hal_ibutton_start_interrupt_in_isr() {
-    furi_hal_gpio_init(&ibutton_gpio, GpioModeInterruptRiseFall, GpioPullNo, GpioSpeedLow);
-    LL_EXTI_ClearFlag_0_31(ibutton_gpio.pin);
-}
-
-void furi_hal_ibutton_stop() {
-    furi_hal_ibutton_pin_high();
-    furi_hal_gpio_init(&ibutton_gpio, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
-}
-
-void furi_hal_ibutton_add_interrupt(GpioExtiCallback cb, void* context) {
-    furi_hal_gpio_add_int_callback(&ibutton_gpio, cb, context);
-}
-
-void furi_hal_ibutton_remove_interrupt() {
-    furi_hal_gpio_remove_int_callback(&ibutton_gpio);
-}
-
-void furi_hal_ibutton_pin_low() {
-    furi_hal_gpio_write(&ibutton_gpio, false);
-}
-
-void furi_hal_ibutton_pin_high() {
-    furi_hal_gpio_write(&ibutton_gpio, true);
-}
-
-bool furi_hal_ibutton_pin_get_level() {
-    return furi_hal_gpio_read(&ibutton_gpio);
-}
-
 void furi_hal_ibutton_pin_configure() {
     furi_hal_gpio_write(&ibutton_gpio, true);
     furi_hal_gpio_init(&ibutton_gpio, GpioModeOutputOpenDrain, GpioPullNo, GpioSpeedLow);
@@ -146,4 +101,4 @@ void furi_hal_ibutton_pin_reset() {
 
 void furi_hal_ibutton_pin_write(const bool state) {
     furi_hal_gpio_write(&ibutton_gpio, state);
-}
\ No newline at end of file
+}
diff --git a/firmware/targets/f7/furi_hal/furi_hal_ibutton.h b/firmware/targets/f7/furi_hal/furi_hal_ibutton.h
index c71c216d6..b723fe176 100644
--- a/firmware/targets/f7/furi_hal/furi_hal_ibutton.h
+++ b/firmware/targets/f7/furi_hal/furi_hal_ibutton.h
@@ -7,7 +7,6 @@
 
 #include <stdbool.h>
 #include <stdint.h>
-#include <furi_hal_gpio.h>
 
 #ifdef __cplusplus
 extern "C" {
@@ -18,71 +17,28 @@ typedef void (*FuriHalIbuttonEmulateCallback)(void* context);
 /** Initialize */
 void furi_hal_ibutton_init();
 
+/**
+ * Start emulation timer
+ * @param period timer period
+ * @param callback timer callback
+ * @param context callback context
+ */
 void furi_hal_ibutton_emulate_start(
     uint32_t period,
     FuriHalIbuttonEmulateCallback callback,
     void* context);
 
+/**
+ * Update emulation timer period
+ * @param period new timer period
+ */
 void furi_hal_ibutton_emulate_set_next(uint32_t period);
 
+/**
+ * Stop emulation timer
+ */
 void furi_hal_ibutton_emulate_stop();
 
-/**
- * Sets the pin to normal mode (open collector), and sets it to float
- */
-void furi_hal_ibutton_start_drive();
-
-/**
- * Sets the pin to normal mode (open collector), and clears pin EXTI interrupt.
- * Used in EXTI interrupt context.
- */
-void furi_hal_ibutton_start_drive_in_isr();
-
-/**
- * Sets the pin to interrupt mode (EXTI interrupt on rise or fall), and sets it to float
- */
-void furi_hal_ibutton_start_interrupt();
-
-/**
- * Sets the pin to interrupt mode (EXTI interrupt on rise or fall), and clears pin EXTI interrupt.
- * Used in EXTI interrupt context.
- */
-void furi_hal_ibutton_start_interrupt_in_isr();
-
-/**
- * Sets the pin to analog mode, and sets it to float
- */
-void furi_hal_ibutton_stop();
-
-/**
- * Attach interrupt callback to iButton pin
- * @param cb callback
- * @param context context
- */
-void furi_hal_ibutton_add_interrupt(GpioExtiCallback cb, void* context);
-
-/**
- * Remove interrupt callback from iButton pin
- */
-void furi_hal_ibutton_remove_interrupt();
-
-/**
- * Sets the pin to low
- */
-void furi_hal_ibutton_pin_low();
-
-/**
- * Sets the pin to high (float in iButton pin modes)
- */
-void furi_hal_ibutton_pin_high();
-
-/**
- * Get pin level
- * @return true if level is high
- * @return false if level is low
- */
-bool furi_hal_ibutton_pin_get_level();
-
 /**
  * Set the pin to normal mode (open collector), and sets it to float
  */
diff --git a/firmware/targets/f7/furi_hal/furi_hal_rfid.c b/firmware/targets/f7/furi_hal/furi_hal_rfid.c
index b0238f79f..145e49df2 100644
--- a/firmware/targets/f7/furi_hal/furi_hal_rfid.c
+++ b/firmware/targets/f7/furi_hal/furi_hal_rfid.c
@@ -77,7 +77,7 @@ void furi_hal_rfid_init() {
 
 void furi_hal_rfid_pins_reset() {
     // ibutton bus disable
-    furi_hal_ibutton_stop();
+    furi_hal_ibutton_pin_reset();
 
     // pulldown rfid antenna
     furi_hal_gpio_init(&gpio_rfid_carrier_out, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
@@ -94,8 +94,8 @@ void furi_hal_rfid_pins_reset() {
 
 void furi_hal_rfid_pins_emulate() {
     // ibutton low
-    furi_hal_ibutton_start_drive();
-    furi_hal_ibutton_pin_low();
+    furi_hal_ibutton_pin_configure();
+    furi_hal_ibutton_pin_write(false);
 
     // pull pin to timer out
     furi_hal_gpio_init_ex(
@@ -115,8 +115,8 @@ void furi_hal_rfid_pins_emulate() {
 
 void furi_hal_rfid_pins_read() {
     // ibutton low
-    furi_hal_ibutton_start_drive();
-    furi_hal_ibutton_pin_low();
+    furi_hal_ibutton_pin_configure();
+    furi_hal_ibutton_pin_write(false);
 
     // dont pull rfid antenna
     furi_hal_gpio_init(&gpio_nfc_irq_rfid_pull, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
diff --git a/lib/one_wire/ibutton/ibutton_worker_modes.c b/lib/one_wire/ibutton/ibutton_worker_modes.c
index b284940e7..da6b10766 100644
--- a/lib/one_wire/ibutton/ibutton_worker_modes.c
+++ b/lib/one_wire/ibutton/ibutton_worker_modes.c
@@ -234,16 +234,13 @@ void ibutton_worker_emulate_timer_cb(void* context) {
     furi_assert(context);
     iButtonWorker* worker = context;
 
-    LevelDuration level =
+    const LevelDuration level_duration =
         protocol_dict_encoder_yield(worker->protocols, worker->protocol_to_encode);
 
-    furi_hal_ibutton_emulate_set_next(level_duration_get_duration(level));
+    const bool level = level_duration_get_level(level_duration);
 
-    if(level_duration_get_level(level)) {
-        furi_hal_ibutton_pin_high();
-    } else {
-        furi_hal_ibutton_pin_low();
-    }
+    furi_hal_ibutton_emulate_set_next(level);
+    furi_hal_ibutton_pin_write(level);
 }
 
 void ibutton_worker_emulate_timer_start(iButtonWorker* worker) {
@@ -266,7 +263,7 @@ void ibutton_worker_emulate_timer_start(iButtonWorker* worker) {
     protocol_dict_set_data(worker->protocols, worker->protocol_to_encode, key_id, key_size);
     protocol_dict_encoder_start(worker->protocols, worker->protocol_to_encode);
 
-    furi_hal_ibutton_start_drive();
+    furi_hal_ibutton_pin_configure();
     furi_hal_ibutton_emulate_start(0, ibutton_worker_emulate_timer_cb, worker);
 }
 
diff --git a/lib/one_wire/one_wire_host.c b/lib/one_wire/one_wire_host.c
index f65f4cf7a..f3d3d3c4d 100644
--- a/lib/one_wire/one_wire_host.c
+++ b/lib/one_wire/one_wire_host.c
@@ -1,5 +1,5 @@
 #include <furi.h>
-#include <furi_hal.h>
+
 #include "one_wire_host.h"
 #include "one_wire_host_timing.h"
 
@@ -24,49 +24,47 @@ void onewire_host_free(OneWireHost* host) {
 }
 
 bool onewire_host_reset(OneWireHost* host) {
-    UNUSED(host);
     uint8_t r;
     uint8_t retries = 125;
 
     // wait until the gpio is high
-    furi_hal_ibutton_pin_high();
+    furi_hal_gpio_write(host->gpio_pin, true);
     do {
         if(--retries == 0) return 0;
         furi_delay_us(2);
-    } while(!furi_hal_ibutton_pin_get_level());
+    } while(!furi_hal_gpio_read(host->gpio_pin));
 
     // pre delay
     furi_delay_us(OWH_RESET_DELAY_PRE);
 
     // drive low
-    furi_hal_ibutton_pin_low();
+    furi_hal_gpio_write(host->gpio_pin, false);
     furi_delay_us(OWH_RESET_DRIVE);
 
     // release
-    furi_hal_ibutton_pin_high();
+    furi_hal_gpio_write(host->gpio_pin, true);
     furi_delay_us(OWH_RESET_RELEASE);
 
     // read and post delay
-    r = !furi_hal_ibutton_pin_get_level();
+    r = !furi_hal_gpio_read(host->gpio_pin);
     furi_delay_us(OWH_RESET_DELAY_POST);
 
     return r;
 }
 
 bool onewire_host_read_bit(OneWireHost* host) {
-    UNUSED(host);
     bool result;
 
     // drive low
-    furi_hal_ibutton_pin_low();
+    furi_hal_gpio_write(host->gpio_pin, false);
     furi_delay_us(OWH_READ_DRIVE);
 
     // release
-    furi_hal_ibutton_pin_high();
+    furi_hal_gpio_write(host->gpio_pin, true);
     furi_delay_us(OWH_READ_RELEASE);
 
     // read and post delay
-    result = furi_hal_ibutton_pin_get_level();
+    result = furi_hal_gpio_read(host->gpio_pin);
     furi_delay_us(OWH_READ_DELAY_POST);
 
     return result;
@@ -91,22 +89,21 @@ void onewire_host_read_bytes(OneWireHost* host, uint8_t* buffer, uint16_t count)
 }
 
 void onewire_host_write_bit(OneWireHost* host, bool value) {
-    UNUSED(host);
     if(value) {
         // drive low
-        furi_hal_ibutton_pin_low();
+        furi_hal_gpio_write(host->gpio_pin, false);
         furi_delay_us(OWH_WRITE_1_DRIVE);
 
         // release
-        furi_hal_ibutton_pin_high();
+        furi_hal_gpio_write(host->gpio_pin, true);
         furi_delay_us(OWH_WRITE_1_RELEASE);
     } else {
         // drive low
-        furi_hal_ibutton_pin_low();
+        furi_hal_gpio_write(host->gpio_pin, false);
         furi_delay_us(OWH_WRITE_0_DRIVE);
 
         // release
-        furi_hal_ibutton_pin_high();
+        furi_hal_gpio_write(host->gpio_pin, true);
         furi_delay_us(OWH_WRITE_0_RELEASE);
     }
 }
@@ -124,13 +121,13 @@ void onewire_host_skip(OneWireHost* host) {
 }
 
 void onewire_host_start(OneWireHost* host) {
-    UNUSED(host);
-    furi_hal_ibutton_start_drive();
+    furi_hal_gpio_write(host->gpio_pin, true);
+    furi_hal_gpio_init(host->gpio_pin, GpioModeOutputOpenDrain, GpioPullNo, GpioSpeedLow);
 }
 
 void onewire_host_stop(OneWireHost* host) {
-    UNUSED(host);
-    furi_hal_ibutton_stop();
+    furi_hal_gpio_write(host->gpio_pin, true);
+    furi_hal_gpio_init(host->gpio_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
 }
 
 void onewire_host_reset_search(OneWireHost* host) {
@@ -151,7 +148,7 @@ void onewire_host_target_search(OneWireHost* host, uint8_t family_code) {
     host->last_device_flag = false;
 }
 
-uint8_t onewire_host_search(OneWireHost* host, uint8_t* newAddr, OneWireHostSearchMode mode) {
+uint8_t onewire_host_search(OneWireHost* host, uint8_t* new_addr, OneWireHostSearchMode mode) {
     uint8_t id_bit_number;
     uint8_t last_zero, rom_byte_number, search_result;
     uint8_t id_bit, cmp_id_bit;
@@ -260,7 +257,7 @@ uint8_t onewire_host_search(OneWireHost* host, uint8_t* newAddr, OneWireHostSear
         host->last_family_discrepancy = 0;
         search_result = false;
     } else {
-        for(int i = 0; i < 8; i++) newAddr[i] = host->saved_rom[i];
+        for(int i = 0; i < 8; i++) new_addr[i] = host->saved_rom[i];
     }
 
     return search_result;
diff --git a/lib/one_wire/one_wire_host.h b/lib/one_wire/one_wire_host.h
index 683235187..9c01abc11 100644
--- a/lib/one_wire/one_wire_host.h
+++ b/lib/one_wire/one_wire_host.h
@@ -22,7 +22,7 @@ typedef struct OneWireHost OneWireHost;
 
 /**
  * Allocate onewire host bus
- * @param gpio 
+ * @param pin
  * @return OneWireHost* 
  */
 OneWireHost* onewire_host_alloc(const GpioPin* gpio_pin);
@@ -114,7 +114,7 @@ void onewire_host_target_search(OneWireHost* host, uint8_t family_code);
  * @param mode 
  * @return uint8_t 
  */
-uint8_t onewire_host_search(OneWireHost* host, uint8_t* newAddr, OneWireHostSearchMode mode);
+uint8_t onewire_host_search(OneWireHost* host, uint8_t* new_addr, OneWireHostSearchMode mode);
 
 #ifdef __cplusplus
 }
diff --git a/lib/one_wire/one_wire_slave.c b/lib/one_wire/one_wire_slave.c
index 87ec8adc8..4b54c4f99 100644
--- a/lib/one_wire/one_wire_slave.c
+++ b/lib/one_wire/one_wire_slave.c
@@ -36,15 +36,15 @@ struct OneWireSlave {
 
 /*********************** PRIVATE ***********************/
 
-uint32_t onewire_slave_wait_while_gpio_is(OneWireSlave* bus, uint32_t time, const bool pin_value) {
-    UNUSED(bus);
+static uint32_t
+    onewire_slave_wait_while_gpio_is(OneWireSlave* bus, uint32_t time, const bool pin_value) {
     uint32_t start = DWT->CYCCNT;
     uint32_t time_ticks = time * furi_hal_cortex_instructions_per_microsecond();
     uint32_t time_captured;
 
     do { //-V1044
         time_captured = DWT->CYCCNT;
-        if(furi_hal_ibutton_pin_get_level() != pin_value) {
+        if(furi_hal_gpio_read(bus->gpio_pin) != pin_value) {
             uint32_t remaining_time = time_ticks - (time_captured - start);
             remaining_time /= furi_hal_cortex_instructions_per_microsecond();
             return remaining_time;
@@ -54,14 +54,14 @@ uint32_t onewire_slave_wait_while_gpio_is(OneWireSlave* bus, uint32_t time, cons
     return 0;
 }
 
-bool onewire_slave_show_presence(OneWireSlave* bus) {
+static bool onewire_slave_show_presence(OneWireSlave* bus) {
     // wait while master delay presence check
     onewire_slave_wait_while_gpio_is(bus, OWS_PRESENCE_TIMEOUT, true);
 
     // show presence
-    furi_hal_ibutton_pin_low();
+    furi_hal_gpio_write(bus->gpio_pin, false);
     furi_delay_us(OWS_PRESENCE_MIN);
-    furi_hal_ibutton_pin_high();
+    furi_hal_gpio_write(bus->gpio_pin, true);
 
     // somebody also can show presence
     const uint32_t wait_low_time = OWS_PRESENCE_MAX - OWS_PRESENCE_MIN;
@@ -75,7 +75,7 @@ bool onewire_slave_show_presence(OneWireSlave* bus) {
     return true;
 }
 
-bool onewire_slave_receive_bit(OneWireSlave* bus) {
+static bool onewire_slave_receive_bit(OneWireSlave* bus) {
     // wait while bus is low
     uint32_t time = OWS_SLOT_MAX;
     time = onewire_slave_wait_while_gpio_is(bus, time, false);
@@ -99,7 +99,7 @@ bool onewire_slave_receive_bit(OneWireSlave* bus) {
     return (time > 0);
 }
 
-bool onewire_slave_send_bit(OneWireSlave* bus, bool value) {
+static bool onewire_slave_send_bit(OneWireSlave* bus, bool value) {
     const bool write_zero = !value;
 
     // wait while bus is low
@@ -120,7 +120,7 @@ bool onewire_slave_send_bit(OneWireSlave* bus, bool value) {
 
     // choose write time
     if(write_zero) {
-        furi_hal_ibutton_pin_low();
+        furi_hal_gpio_write(bus->gpio_pin, false);
         time = OWS_WRITE_ZERO;
     } else {
         time = OWS_READ_MAX;
@@ -128,12 +128,12 @@ bool onewire_slave_send_bit(OneWireSlave* bus, bool value) {
 
     // hold line for ZERO or ONE time
     furi_delay_us(time);
-    furi_hal_ibutton_pin_high();
+    furi_hal_gpio_write(bus->gpio_pin, true);
 
     return true;
 }
 
-void onewire_slave_cmd_search_rom(OneWireSlave* bus) {
+static void onewire_slave_cmd_search_rom(OneWireSlave* bus) {
     const uint8_t key_bytes = 8;
     uint8_t* key = onewire_device_get_id_p(bus->device);
 
@@ -152,7 +152,7 @@ void onewire_slave_cmd_search_rom(OneWireSlave* bus) {
     }
 }
 
-bool onewire_slave_receive_and_process_cmd(OneWireSlave* bus) {
+static bool onewire_slave_receive_and_process_cmd(OneWireSlave* bus) {
     uint8_t cmd;
     onewire_slave_receive(bus, &cmd, 1);
 
@@ -179,14 +179,14 @@ bool onewire_slave_receive_and_process_cmd(OneWireSlave* bus) {
     }
 }
 
-bool onewire_slave_bus_start(OneWireSlave* bus) {
+static bool onewire_slave_bus_start(OneWireSlave* bus) {
     bool result = true;
 
     if(bus->device == NULL) {
         result = false;
     } else {
         FURI_CRITICAL_ENTER();
-        furi_hal_ibutton_start_drive_in_isr();
+        furi_hal_gpio_init(bus->gpio_pin, GpioModeOutputOpenDrain, GpioPullNo, GpioSpeedLow);
         bus->error = NO_ERROR;
 
         if(onewire_slave_show_presence(bus)) {
@@ -198,7 +198,7 @@ bool onewire_slave_bus_start(OneWireSlave* bus) {
             result = false;
         }
 
-        furi_hal_ibutton_start_interrupt_in_isr();
+        furi_hal_gpio_init(bus->gpio_pin, GpioModeInterruptRiseFall, GpioPullNo, GpioSpeedLow);
         FURI_CRITICAL_EXIT();
     }
 
@@ -208,7 +208,7 @@ bool onewire_slave_bus_start(OneWireSlave* bus) {
 static void exti_cb(void* context) {
     OneWireSlave* bus = context;
 
-    volatile bool input_state = furi_hal_ibutton_pin_get_level();
+    volatile bool input_state = furi_hal_gpio_read(bus->gpio_pin);
     static uint32_t pulse_start = 0;
 
     if(input_state) {
@@ -251,14 +251,15 @@ void onewire_slave_free(OneWireSlave* bus) {
 }
 
 void onewire_slave_start(OneWireSlave* bus) {
-    furi_hal_ibutton_add_interrupt(exti_cb, bus);
-    furi_hal_ibutton_start_interrupt();
+    furi_hal_gpio_add_int_callback(bus->gpio_pin, exti_cb, bus);
+    furi_hal_gpio_write(bus->gpio_pin, true);
+    furi_hal_gpio_init(bus->gpio_pin, GpioModeInterruptRiseFall, GpioPullNo, GpioSpeedLow);
 }
 
 void onewire_slave_stop(OneWireSlave* bus) {
-    UNUSED(bus);
-    furi_hal_ibutton_stop();
-    furi_hal_ibutton_remove_interrupt();
+    furi_hal_gpio_write(bus->gpio_pin, true);
+    furi_hal_gpio_init(bus->gpio_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+    furi_hal_gpio_remove_int_callback(bus->gpio_pin);
 }
 
 void onewire_slave_attach(OneWireSlave* bus, OneWireDevice* device) {
@@ -284,7 +285,7 @@ void onewire_slave_set_result_callback(
 bool onewire_slave_send(OneWireSlave* bus, const uint8_t* address, const uint8_t data_length) {
     uint8_t bytes_sent = 0;
 
-    furi_hal_ibutton_pin_high();
+    furi_hal_gpio_write(bus->gpio_pin, true);
 
     // bytes loop
     for(; bytes_sent < data_length; ++bytes_sent) {
@@ -306,7 +307,7 @@ bool onewire_slave_send(OneWireSlave* bus, const uint8_t* address, const uint8_t
 bool onewire_slave_receive(OneWireSlave* bus, uint8_t* data, const uint8_t data_length) {
     uint8_t bytes_received = 0;
 
-    furi_hal_ibutton_pin_high();
+    furi_hal_gpio_write(bus->gpio_pin, true);
 
     for(; bytes_received < data_length; ++bytes_received) {
         uint8_t value = 0;
diff --git a/lib/one_wire/one_wire_slave.h b/lib/one_wire/one_wire_slave.h
index 319282c5c..2e5db3a1c 100644
--- a/lib/one_wire/one_wire_slave.h
+++ b/lib/one_wire/one_wire_slave.h
@@ -19,7 +19,7 @@ typedef void (*OneWireSlaveResultCallback)(void* context);
 
 /**
  * Allocate onewire slave
- * @param pin 
+ * @param gpio_pin
  * @return OneWireSlave* 
  */
 OneWireSlave* onewire_slave_alloc(const GpioPin* gpio_pin);