* new validated signals (from IRDB)!
* add last updated line
* small monitor.ir format fixes
* Update changelog
---------
Co-authored-by: Willy-JL <49810075+Willy-JL@users.noreply.github.com>
* Add support for NTAG I2C Plus 1k and 2k chips so my Dangerous Things xSIID implant scans and displays NDEF properly.
* Update changelog
* Format
---------
Co-authored-by: Willy-JL <49810075+Willy-JL@users.noreply.github.com>
disable ext module due to lack of required hardware on them and incorrect usage of freq analyzer, like trying to receive "signals" with it (from the space??), while it should be used only to get frequency of the remote placed around 1-10cm around flipper's left corner
Also fix possible GSM mobile towers signal interference by limiting upper freq to 920mhz max
Fix dupliacted freq lists and use user config for nearest freq selector too (finally)
* adding smartrider_parser
* adding SmartRider parser
new parser for SmartRider cards, a public transport smart card system used in Western Australia.
extracts and interprets key information from the card, including:
-Current balance
-Card serial number
-Concession type
-Purchase cost
-Details of the last two trips (including tag on/off status, cost, route, transaction number, and journey number)
* optimising
- removed all logging to simplify output.
- used early returns for clearer error handling.
- optimized setups outside loops to improve memory use.
- simplified flows by removing unnecessary loops.
- placed variables closer to their use for better readability.
- cached data blocks to streamline data handling.
- added a helper function for parsing trips, reducing redundancy.
- corrected loop counter types to avoid compile-time errors.
* cleaning displayed data
- removed transaction (txn) and journey (jrn) numbers to declutter the trip details.
- shortened "previous trip" to "prev trip" to optimize screen space usage.
* added and refined displayed data
added auto load field "threshold amount / reload amount"
changed serial to display first two digits as SR0 for consistency with physical card.
* Format
* Improved Verification Process
- Added definitions for STANDARD_KEY_2 and STANDARD_KEY_3
- Enhanced smartrider_verify function to check for all three specific keys:
- STANDARD_KEY_1 in Sector 0 as Key A
- STANDARD_KEY_2 in Sector 6 as Key A
- STANDARD_KEY_3 in Sector 6 as Key B
- Implemented read operations to verify actual key values stored on the card
- Added comparisons between read key data and expected key values
- Improved debug logging for each step of the verification process
* Integrated Verification into Parse Function
- Added key verification for sectors 0 and 6
- Implemented do-while loop structure for early exit on verification failure
- Moved block readability checks inside verification process
- Added parsed flag to indicate successful parsing
- Updated return value to reflect parsing success
- Maintained existing parsing logic and output format
* fixed false positives
recieved some cuid cards today so was able to test for myself can confirm works... finally
changes made:
-updated key assignment in smartrider_read
-simplified key verification in smartrider_parse
-improved error handling and logging
-streamlined data parsing process
-corrected key checking logic
-added checks for required block readability
-improved flow control with strategic breaks
-adjusted block data access method
* small optimizations
- refactored `smartrider_verify` and `smartrider_read` by abstracting repeated key operations into `authenticate_and_read` function for improved code maintainability.
- optimized `smartrider_read` by introducing a loop for key setup, reducing redundancy and improving efficiency.
- streamlined error handling in `smartrider_read` by replacing do-while loop with conditional checks.
- changed standard key references to use `standard_keys` array indices
* formatting
* Delete duplicate smartrider.c
* updated smartrider.c
* found 'fbt format'
* transaction parsing updates
-removed last trip/prev trip wording and replaced with "Trip History" header
-added date in front of each transaction
-only shows transaction cost if it's higher than 0
-changed tag on/tag off to +/- to save room
-added 8 more transactions to Trip History
-verified still working and formatted with fbt
* fixed reboot with partially unlocked card
-added bounds checking for all block accesses to prevent out-of-range memory access
-implemented improved error handling with an error_occurred flag
-introduced a maximum iteration count for date calculation to prevent infinite loops
-used snprintf with size limits for all string operations to avoid buffer overflows
-added validation for trip count to ensure it doesn't exceed the maximum allowed
-implemented checks to skip unread or out-of-range blocks during trip parsing
-added safeguards against corrupted or invalid timestamp data
* optimized SmartRider card parsing and verification
- replaced do-while loop with direct error checks in smartrider_parse
- optimized key verification using direct memcmp in smartrider_verify
- introduced inline functions for common operations (e.g., set_key, read_le16)
- replaced bubble sort with insertion sort for trip data
- simplified date calculation using a lookup table for days in month
- used uint_fast8_t for loop counters to allow compiler optimization
- added __attribute__((hot)) to key functions for aggressive optimization
- removed redundant variable declarations and function calls
- optimized memory usage with static const arrays for required blocks
- simplified error handling in smartrider_read and authenticate_and_read
- used __builtin_memcpy and __builtin_memcmp for potential compiler optimizations
- tested and formatted with fbt
* small fixes
-renamed "Trip History" to "Tag On/Off History"
-fixed date calculation to account for leap years
-misc changes
* Update changelog
---------
Co-authored-by: Willy-JL <49810075+Willy-JL@users.noreply.github.com>
* feat(subghz): show satellites if enabled
Replaces the display of the number of satellites during SubGHz scanning. If GPS is enabled (an an external module connected) it will blink a GPS icon with the number of sats currently in range (even if zero).
Using a 10x10px "positioning" icon that replaces the SubGHz icon on the bottom right.
* Revert api version to ofw release
* f18 too
* Tweak icon a little
* Update changelog
* Format
---------
Co-authored-by: Willy-JL <49810075+Willy-JL@users.noreply.github.com>
* Update mf_classic_dict.nfc
Added 6 new keys from Bulgaria Hotel
Keys are not duplicated!
* Add section delimiter
* No LF at EOF
* Update changelog
---------
Co-authored-by: Willy-JL <49810075+Willy-JL@users.noreply.github.com>
