* feat(subghz): Nexus-TH improvements on detection
Added detection improvements for Nexus-TH as in 00bd97c63a/src/devices/nexus.c (L63-L78) :
- If hum==0% there's no humidity sensor, so don't overwrite to 20%
- If the Rubicson check matches, then it's probably not a Nexus-TH
- Check temp range beween -50C and 100C
* Update changelog
---------
Co-authored-by: Willy-JL <49810075+Willy-JL@users.noreply.github.com>
* fix(subghz): s/Latitute/Latitude/
* feat(subghz): using Lat,Lon with fallback to older values
* Some speedup and fix fallbacks
* Update changelog
---------
Co-authored-by: Willy-JL <49810075+Willy-JL@users.noreply.github.com>
* feat(subghz): added V0 message format to Bresser 3CH protocol
Improved the Bresser 3CH recognition, as some sensors send multiple message types at the same time.
* Update changelog
---------
Co-authored-by: Willy-JL <49810075+Willy-JL@users.noreply.github.com>
disable ext module due to lack of required hardware on them and incorrect usage of freq analyzer, like trying to receive "signals" with it (from the space??), while it should be used only to get frequency of the remote placed around 1-10cm around flipper's left corner
Also fix possible GSM mobile towers signal interference by limiting upper freq to 920mhz max
Fix dupliacted freq lists and use user config for nearest freq selector too (finally)
* feat(subghz): added Bresser 3CH weather station
Added the Bresser 3CH, a weather station supported by rtl_433 already.
* Update changelog
---------
Co-authored-by: Willy-JL <49810075+Willy-JL@users.noreply.github.com>
* feat(subghz): added Solight TE44 recognition
Added the Solight TE44 weather station, with a protocol similar to Auriol HG06061A but with a checksum and different sync values.
Updated the tests as well, including a raw and a decoded capture.
* Lint fixes
* Update changelog
---------
Co-authored-by: Willy-JL <49810075+Willy-JL@users.noreply.github.com>
* Storage: drop internal storage
* Storage: rollback some unnecessary changes
* Storage: rollback some unnecessary changes part 2
* Storage: cleanup various defines and int handling. Ble: allow short connection interval if internal flash is not used.
* Storage: do not return storage if it is not ready
* Save PIN code to RTC, update settings
* Simplify the code, clean up includes
* Rearrange some code
* apps: storage_move_to_sd: conditionally enable with --extra-define=STORAGE_INT_ON_LFS
* Load Desktop settings automatically
* Redirect /any to /ext
* Abolish storage_move_to_sd app
* Remove as many mentions of ANY_PATH as possible
* Fix desktop settings wrongly not loading
* Improve desktop settings handling and strings
* Load BLE settings and keys automatically
* Improve BLE configuration procedure
* Do not load bluetooth keys twice if they were already loaded
* Load dolphin state automatically
* Fix merge artifact
* Load notification settings automatically
* Update desktop settings strings
* Load expansion settings automatically
* Do not use thread signals to reload desktop settings
* Load region data automatically, separate to its own hook
* Improve ble behaviour with no keys
* Fix Dolphin state not resetting correctly
* Add a status check
* Make Desktop save its own settings
* Check result when taking and releasing mutex
* Improve default thread signal handling in FuriEventLoop
* Make bt service in charge of saving settings, add settings api
* Fix a deadlock due to timer thread not receiving time
* Lock core2 when reinitialising bt
* Update clang-format
* Revert "Update clang-format"
This reverts commit d61295ac063c6ec879375ceeab54d6ff2c90a9a1.
* Format sources with clang-format
* Revert old stack size for desktop settings
* Allocate big struct dynamically
* Simplify PIN comparison
* Save pointer to storage in Desktop object
* Fix region provisioning for hardware regions
* Remove stale TODO + siimplify code
* Clean up region.c
* Use sizeof instead of macro define
* Limit PIN length to 10 for consistency
* Emit a warning upon usage of /any
* Add delay after finding flipper
* Remove unnecessary delay
* Remove all mentions of STORAGE_INT_ON_LFS
* Remove littlefs and internal storage
* Remove all possible LittleFS mentions
* Fix browser tab in Archive
* Ble: fix connection interval explanation
* Bump API Symbols
* BLE: Update comments interval connection comments
* Storage: clear FuriHalRtcFlagStorageFormatInternal if set
---------
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: hedger <hedger@nanode.su>
Co-authored-by: Georgii Surkov <37121527+gsurkov@users.noreply.github.com>
* Added Dickert MAHS protocol
* Update protocol_items.c
* Added Dickert MAHS protocol reference
* Update protocol_items.h
* Removed logging and some defines
* Reworked the send code to properly adhere to Dickert timings
* Added subghz unit test for Dickert MAHS
* Minor fix in encoding length
* Added Dickert Decoder Test to subghz unit tests and set repeat=10
* SubGhz: cleanup dickert mahs code and documentation
* SubGhz: correct type in for statement in dickert mahs
Co-authored-by: あく <alleteam@gmail.com>
* Storage: drop internal storage
* Storage: rollback some unnecessary changes
* Storage: rollback some unnecessary changes part 2
* Storage: cleanup various defines and int handling. Ble: allow short connection interval if internal flash is not used.
* Storage: do not return storage if it is not ready
* Save PIN code to RTC, update settings
* Simplify the code, clean up includes
* Rearrange some code
* apps: storage_move_to_sd: conditionally enable with --extra-define=STORAGE_INT_ON_LFS
* Load Desktop settings automatically
* Redirect /any to /ext
* Abolish storage_move_to_sd app
* Remove as many mentions of ANY_PATH as possible
* Fix desktop settings wrongly not loading
* Improve desktop settings handling and strings
* Load BLE settings and keys automatically
* Improve BLE configuration procedure
* Do not load bluetooth keys twice if they were already loaded
* Load dolphin state automatically
* Fix merge artifact
* Load notification settings automatically
* Update desktop settings strings
* Load expansion settings automatically
* Do not use thread signals to reload desktop settings
* Load region data automatically, separate to its own hook
* Improve ble behaviour with no keys
* Fix Dolphin state not resetting correctly
* Add a status check
* Make Desktop save its own settings
* Check result when taking and releasing mutex
* Improve default thread signal handling in FuriEventLoop
* Make bt service in charge of saving settings, add settings api
* Fix a deadlock due to timer thread not receiving time
* Lock core2 when reinitialising bt
* Update clang-format
* Revert "Update clang-format"
This reverts commit d61295ac063c6ec879375ceeab54d6ff2c90a9a1.
* Format sources with clang-format
* Revert old stack size for desktop settings
* Allocate big struct dynamically
* Simplify PIN comparison
* Save pointer to storage in Desktop object
* Fix region provisioning for hardware regions
* Remove stale TODO + siimplify code
* Clean up region.c
* Use sizeof instead of macro define
* Limit PIN length to 10 for consistency
* Emit a warning upon usage of /any
* Add delay after finding flipper
* Remove unnecessary delay
* Remove all mentions of STORAGE_INT_ON_LFS
* Remove littlefs and internal storage
* Remove all possible LittleFS mentions
* Fix browser tab in Archive
* Ble: fix connection interval explanation
* Bump API Symbols
* BLE: Update comments interval connection comments
* Storage: clear FuriHalRtcFlagStorageFormatInternal if set
---------
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: hedger <hedger@nanode.su>
Co-authored-by: Georgii Surkov <37121527+gsurkov@users.noreply.github.com>
