* Expansion: Wake thread on UART error flag
* Expansion: Stop UART async rx early
* FuriHalSerial: Fix RXFNE interrupt hang
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
* FeliCa: Handle non-hardware Polling commands
NFC TagInfo and possibly other readers rely on Polling commands with Request Code of 1 (default System Code request) or non-FFFF System Code to detect card type. Since the NFC controller doesn't seem to handle them in hardware and simply bubbles them up, and then the Flipper firmware will just ignore them and refuse to respond afterwards, this causes the reading operation to fail.
This commit adds a simple handler for such Polling commands so that readers behaving like NFC TagInfo could read the emulated card without failing.
* Only handle cases when System Code is not FFFF
The NFC controller should handle Polling commands with the System Code set to FFFF, so it's not necessary for the firmware to handle it.
* Remove system code logging
* More cleanups
* Remove the claim that we need a poller change
We already have enough information to determine whether or not the card supports NDEF since SYS_OP register value is included in all current Lite-S card dumps.
* Respond to 12FC polling command when needed
* Handle Polling with NDEF and Lite-S Service Code
This allows the reader to specifically select the service by naming the Service Code.
* Introduce API for manual handling of Polling commands
Introduce nfc_felica_listener_timer_anticol_start() and nfc_felica_listener_timer_anticol_stop(). These are for now just wrappers around the block_tx timer that can be used to delay the response until the desired Time Slot. Thanks to the loose timing constraints of FeliCa collision resolution protocol, no compensation seems to be necessary. Also enabled the block_tx timer for FeliCa listener, but with both compensation and fdt set to 0 to keep the original behavior of not using the timer during normal data exchange.
This API is now being used for handling Polling commands that are not handled by the NFC controller on the hardware side.
* Document target_time_slot
* Implement changes suggested by @RebornedBrain
* api: f18 version sync
* nfc: added stubs for `nfc_felica_listener_timer_anticol` for unit tests
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: hedger <hedger@nanode.su>
* libs: stricter constness for saving RAM with .rodata section; fbt: sdk: fixed signature generation for nested const params
* hal: additional fixes for constness in USB subsystem
* debug apps: additional usb-related fixes
* mjs: more consts for token parser
* fatfs: const driver struct
* hal: more consts for ble & nfc vars
* hal: made FuriHalSpiBusHandle static
* hal: made FuriHalI2cBusHandle static
* usb: restored previous api
* linter fixes
* API fixes
* Furi, USB, BLE: extra stack space for some threads, small code cleanup.
* Furi: thread watermark check on exit, explicitly crash if built with LIB_DEBUG=1
* Debug: color logging in apps/furi gdb helper, check and show crash message in gdb console.
- BT Service: cleanup code
- Dialog: correct release order in file browser
- Rpc: rollback to pre #3881 state
- Kernel: fix inverted behavior in furi_kernel_is_running
- Log: properly take mutex when kernel is not running
- Thread: rework tread control block scrubbing procedure, ensure that we don't do stupid things in idle task, add new priority for init task
- Timer: add control queue flush method, force flush on stop
- Furi: system init task now performs thread scrubbing
- BleGlue: add some extra checks
- FreeRTOSConfig: fix bunch of issues that were preventing configuration from being properly applied and cleanup
* FuriHal, drivers: rework gauge initialization, ensure that we can recover from any kind of internal/external issue
* Make PVS happy
* Format sources
* bq27220: add gaps injection into write operations
* Drivers: bq27220 cleanup and various fixes
* Drivers: bq27220 verbose logging and full access routine fix
* Drivers: better cfg mode exit handling in bq27220 driver
* Drivers: rewrite bq27220 based on bqstudio+ev2400, experiments and guessing. Fixes all known issues.
* PVS: hello license check
* Drivers: minimize reset count in bq27220 init sequence
* Drivers: bq27220 hide debug logging, reorganize routine to ensure predictable result and minimum amount of interaction with gauge, add documentation and notes.
* Drivers: more reliable bq27220_full_access routine
* Drivers: replace some warning with error in bq27220
* Drivers: move static asserts to headers in bq27220
* Fix PVS warnings
* Drivers: simplify logic in bq27220
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
* System code added to felica hal config functions
* Felica sensf_res setup logic adjusted with new struct
* Set api symbols version to 73.0
* Felica unit tests fix
* Furi: prevent use after free on xEventGroupSetBits call
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
strlcpy doesn't zero the buffer and ensures null termination,
just like snprintf
strlcat is already used by mjs and it's a safe alternative to strcat,
so it should be OK to expose to apps
* Storage: drop internal storage
* Storage: rollback some unnecessary changes
* Storage: rollback some unnecessary changes part 2
* Storage: cleanup various defines and int handling. Ble: allow short connection interval if internal flash is not used.
* Storage: do not return storage if it is not ready
* Save PIN code to RTC, update settings
* Simplify the code, clean up includes
* Rearrange some code
* apps: storage_move_to_sd: conditionally enable with --extra-define=STORAGE_INT_ON_LFS
* Load Desktop settings automatically
* Redirect /any to /ext
* Abolish storage_move_to_sd app
* Remove as many mentions of ANY_PATH as possible
* Fix desktop settings wrongly not loading
* Improve desktop settings handling and strings
* Load BLE settings and keys automatically
* Improve BLE configuration procedure
* Do not load bluetooth keys twice if they were already loaded
* Load dolphin state automatically
* Fix merge artifact
* Load notification settings automatically
* Update desktop settings strings
* Load expansion settings automatically
* Do not use thread signals to reload desktop settings
* Load region data automatically, separate to its own hook
* Improve ble behaviour with no keys
* Fix Dolphin state not resetting correctly
* Add a status check
* Make Desktop save its own settings
* Check result when taking and releasing mutex
* Improve default thread signal handling in FuriEventLoop
* Make bt service in charge of saving settings, add settings api
* Fix a deadlock due to timer thread not receiving time
* Lock core2 when reinitialising bt
* Update clang-format
* Revert "Update clang-format"
This reverts commit d61295ac063c6ec879375ceeab54d6ff2c90a9a1.
* Format sources with clang-format
* Revert old stack size for desktop settings
* Allocate big struct dynamically
* Simplify PIN comparison
* Save pointer to storage in Desktop object
* Fix region provisioning for hardware regions
* Remove stale TODO + siimplify code
* Clean up region.c
* Use sizeof instead of macro define
* Limit PIN length to 10 for consistency
* Emit a warning upon usage of /any
* Add delay after finding flipper
* Remove unnecessary delay
* Remove all mentions of STORAGE_INT_ON_LFS
* Remove littlefs and internal storage
* Remove all possible LittleFS mentions
* Fix browser tab in Archive
* Ble: fix connection interval explanation
* Bump API Symbols
* BLE: Update comments interval connection comments
* Storage: clear FuriHalRtcFlagStorageFormatInternal if set
---------
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: hedger <hedger@nanode.su>
Co-authored-by: Georgii Surkov <37121527+gsurkov@users.noreply.github.com>
* fbt: added -Wundef to compiler options; libs: various small fixes for missing defines; desktop: proper access to current RTOS config
* apps: fixes for FURI_DEBUG handling
* rpc: unified definition checks
* Cleanup various defines use
* Cleanup configs and move SVCall ISR priority configuration to furi_hal_interrupts
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* CCID: Add CCIDWorker
This new thread allows for Flipper to receive CCID messages bigger than CCID_EPSIZE
by receiving multiple packaged in a row and adding them to the buffer
* Fixed data types
* Format sources
* Review feedback
* Variable names
* FuriHal: cleanup and fortify code in furi_hal_usb_ccid
* Review feedbacks (also added extra checks)
* Fixed use after free
* Fix lint
* Sync API Symbols version
* Sync API Symbols version again
* FuriHal: fix clangd warnings, add doxygen comments for furi_hal_usb_ccid.h
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* CCID: Improve request and response data handling
- Add iso7816_set_response function: serves a helpers to set SW1 and SW2 values
- improved iso7816_read_response_apdu by correctly parsing Lc and Le values
- add client script to make testing easier
* lint and rename
* Format
* Review changes: pragma once, typedef
* Move command/response data and datalen into respective structures
* Remove conditional for Lc=0
* Fix comment: Le
* Make PVS happy and fix spelling
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: properly handle high priority USB IRQ, change CDC decriptor to use separate TX/RX endpoints
* Furi: drop task handle, cleanup casts and memory corrupt in threads
* FuriHal: update max power in USB descriptors
* Furi: properly handle thread free if thread was not started
* Furi crash: meaningful interrupt name instead of id
---------
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Remove unnecessary checks
* Sublime: never insert missing headers
* Cleanup furi defines use
* Cleanup startup. Cleanup linker scripts. Explicitly define all interrupts hadlers, including uninmplemented one.
* Startup routine in C
* Drop assembler startup
* Move linker defines to stm32wb55_linker.h, cleanup naming, unify usage. Mpu: protect last 32b of main stack. Document various obscure things.
* Move furi_hal_switch documentation to appropriate place, use 0x0 for updater jump.
* UnitTests: move all temporary test files into tmp folder
---------
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Moved some structs and defs from poller to generic felica
* Buffer size increased for transferring more data
* Felica HAL Tx function implemented
* Some structs and fields for listener
* Raw listener implementation
* Added new event for felica activation
* Proper config fot listener added
* Moved some structs from poller in order to use them in listener too
* New function for calculating MAC
* Listener data structures and function definitions
* Private listener functions implementation added
* Raw felica listener logic implementation added
* Fix total sector count both for poller and listener
* Defined type for write handlers
* New logic for write operations added
* Removed old commented code
* Splitted read logic into several separate functions
* New type added and some fields to instance
* New logic of read command implemented
* Defines added for response codes
* Functions moved to private namespace
* Function visibility changed and some cleanups
* Update felica_listener.c, felica_listener_i.c, and felica_listener_i.h
* Some type adjustments
* Moved frame_exchange function to private namespace
* Error handling added
* Function to get data_ptr for write request added
* Missing declaration added
* Add processing of nfc errors
* write_with_mac is a local variable now
* Adjustments to MAC calculation logic
* Values replaced with defines
* Update nfc_transport.c with felica logic
* Sync felica poller added for unit tests
* Felica unit_tests and data dump added
* Fixed proper reading of MAC_A block when it is 1st
* Macro definitions for MC added
* Function simplified
* More defines
* CRC check for incomming packets added
* Readonly logic adjusted
* Block write validation adjusted
* New logic for ID block writing
* Some cleanups
* New logic of moving across the block list with different element length
* Some cleanups
* Adjusted requires_mac logic to cover all blocks needed
* Cleanups and renaming
* New block list validation logic
* Block list logic iteration simplified
* Some asserts and checks added
* Replaced MC[2] checks with macros
* Marked def values as unsigned
* Removed old code
* Removed commented function declarations
* Changed protected block in felica test card dump and adjusted tests
* Fixes after merge
* Moved defines to header
* Now we allocate memory for max possible response pack in any case
* Some renaming and documentation
* Bump api symbols
* Set feature to emulate full for felica
* Removed 'More' button and added MoreInfo feature which adds this button back
* Types renamed
* Removed unnecessary code
* Reformat comments
* Fixing missing signatures
* Replaced crash with error log and return value
* Format doxygen comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Use static mutex
* Add static_assert checks
* Use static semaphore
* Fix formatting
* Use static stream buffer
* Use static timer
* Use static event group
* Increase allocation size for stream buffer
* Remove recursive bit from the mutex before freeing
* Prevent service tasks from ever returning
* Use static threads
* Do not realloc memory when changing stack size
* Use FuriSemaphore instead of raw FreeRTOS one in rpc_test
* Remove redundant includes
* Abolish FreeRTOS dynamic allocation
* Improve FuriMutex
* Improve FuriMessageQueue
* Remove redundant comments and parentheses
* Clean up code more
* Create service threads via a dedicated constructor
* Minor code improvements
* Update docs for FuriThread, FuriTimer
* Fix doxygen typo
* Use a bigger buffer for static StreamBuffer
* Furi: remove timer control block only when timer thread have completed all operations
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Add initial ISO7816 support
* Format sources and sync API Symbols version
* Debug: change VID/PID in ccid test app to opensc detectable generic one
Co-authored-by: あく <alleteam@gmail.com>
* text box: fix reset text offset state after initial text iteration
* debug: add tests for text box view debug app
* hal: flash: removed redundant #else
Co-authored-by: hedger <hedger@nanode.su>
* Examples: remove unused context
* FuriHal: add simple ADC API
* Examples: add ADC example app
* FuriHal: add extended configuration options for ADC API
* FuriHal: add ADC clock configuration, fix calibration routine for single ended mode, new optimized parameters, documentation.
* FuriHal: add FuriHalAdcChannelTEMPSENSOR sampling time note
* FuriHal: update FuriHalAdcChannelVBAT description.
* FuriHal: use insomnia while ADC is acquired.
* Examples: cleanup example_adc a little bit
* Api Symbols: replace asserts with checks
* Api Symbols: replace asserts with checks part 2
* Update no args function signatures with void, to help compiler to track incorrect usage
* More unavoidable void
* Update PVS config and code to make it happy
* Format sources
* nfc: fix checks
* dead code cleanup & include fixes
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: hedger <hedger@nanode.su>
toolchain: updated to v33 with debugging & other fixes
toolchain: better error handling during update/env configuration process
debugging: improved udev rules file, added readme on installation
firmware: bumped compiler C/C++ standards (stricter code checks)
firmware: fixed warnings emerging from newer standards
ufbt: FBT_NOENV is now also supported by ufbt
fbt: added ccache-related variables to env forward list on Windows
* datetimelib created
* datetimelib unit tests added
* firmware fixes to new datetimelib
* typo fix
* merge artifacts fixed, datetimelib renamed to datetime
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Separate expansion control and worker threads
* Add edge case checks
* Reduce expansion control thread stack size, add comments
* Fix crash when disabling expansion modules
* Show a different RPC icon for expansion modules
* Restore expansion interrupt on changing logging settings
* Improve responsiveness in heavy games at the expense of dropped frames
* Improve furi_hal_serial API
* Fix a typo
* Remove too optimistic furi_check, replace with condition
* Fix premature RX interrupt during serial configuration
* Disable expansion interrupt if the handle was acquired
* Do not use a timer callback
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
