* System code added to felica hal config functions
* Felica sensf_res setup logic adjusted with new struct
* Set api symbols version to 73.0
* Felica unit tests fix
* Furi: prevent use after free on xEventGroupSetBits call
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriTimer: Use a local variable to wait for deletion
This combines the current synchronous behaviour
(as we could have deferred the free call too) with
a smaller FuriTimer - it's safe to pass a pointer to
a local variable to this pending timer call, because we
know it'll be finished before the caller returns
* Tighten the use of FuriThread* vs FuriThreadId
Event loop and Loader mixed those two,
but the fact those are aliases should be an implementation detail.
For this reason, thread.c is still allowed to mix them freely.
* Abstract primitive type from main logic in FuriEventLoop
* Remove message_queue_i.h
* Add stream buffer support for event loop
* Add semaphore support for event loop
* Add temporary unit test workaround
* Make the linter happy
* Add mutex support for event loop
* Implement event subscription and unsubscription while the event loop is running
* Implement edge events
* Fix leftover logical errors
* Add event loop timer example application
* Implement flag-based edge trigger and one-shot mode
* Add event loop mutex example application
* Only notify the event loop if stream buffer is at or above its trigger level
* Reformat comments
* Add event loop stream buffer example application
* Add event loop multiple elements example application
* Improve event loop flag names
* Remove redundant signal handler as it is already handled by the event loop
* Refactor Power service, improve ViewHolder
* Use ViewHolder instead of ViewDispatcher in About app
* Enable ViewDispatcher queue on construction, deprecate view_dispatcher_enable_queue()
* Remove all invocations of view_dispatcher_enable_queue()
* Remove app-scened-template
* Remove missing library from target.json
* Port Accessor app to ViewHolder
* Make the linter happy
* Add example_view_holder application, update ViewHolder docs
* Add example_view_dispatcher application, update ViewDispatcher docs
* Replace FuriSemaphore with FuriApiLock, remove workaround delay
* Fix logical error
* Fix another logical error
* Use the sources directive to speed up compilation
* Use constant define macro
* Improve FuriEventLoop documentation
* Improve FuriEventLoop documentation once more
* Bump API Version
* Gui: remove redundant checks from ViewDispatcher
* Gui: remove dead ifs from ViewDispatcher
Co-authored-by: Silent <CookiePLMonster@users.noreply.github.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: あく <alleteam@gmail.com>
* Storage: drop internal storage
* Storage: rollback some unnecessary changes
* Storage: rollback some unnecessary changes part 2
* Storage: cleanup various defines and int handling. Ble: allow short connection interval if internal flash is not used.
* Storage: do not return storage if it is not ready
* Save PIN code to RTC, update settings
* Simplify the code, clean up includes
* Rearrange some code
* apps: storage_move_to_sd: conditionally enable with --extra-define=STORAGE_INT_ON_LFS
* Load Desktop settings automatically
* Redirect /any to /ext
* Abolish storage_move_to_sd app
* Remove as many mentions of ANY_PATH as possible
* Fix desktop settings wrongly not loading
* Improve desktop settings handling and strings
* Load BLE settings and keys automatically
* Improve BLE configuration procedure
* Do not load bluetooth keys twice if they were already loaded
* Load dolphin state automatically
* Fix merge artifact
* Load notification settings automatically
* Update desktop settings strings
* Load expansion settings automatically
* Do not use thread signals to reload desktop settings
* Load region data automatically, separate to its own hook
* Improve ble behaviour with no keys
* Fix Dolphin state not resetting correctly
* Add a status check
* Make Desktop save its own settings
* Check result when taking and releasing mutex
* Improve default thread signal handling in FuriEventLoop
* Make bt service in charge of saving settings, add settings api
* Fix a deadlock due to timer thread not receiving time
* Lock core2 when reinitialising bt
* Update clang-format
* Revert "Update clang-format"
This reverts commit d61295ac063c6ec879375ceeab54d6ff2c90a9a1.
* Format sources with clang-format
* Revert old stack size for desktop settings
* Allocate big struct dynamically
* Simplify PIN comparison
* Save pointer to storage in Desktop object
* Fix region provisioning for hardware regions
* Remove stale TODO + siimplify code
* Clean up region.c
* Use sizeof instead of macro define
* Limit PIN length to 10 for consistency
* Emit a warning upon usage of /any
* Add delay after finding flipper
* Remove unnecessary delay
* Remove all mentions of STORAGE_INT_ON_LFS
* Remove littlefs and internal storage
* Remove all possible LittleFS mentions
* Fix browser tab in Archive
* Ble: fix connection interval explanation
* Bump API Symbols
* BLE: Update comments interval connection comments
* Storage: clear FuriHalRtcFlagStorageFormatInternal if set
---------
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: hedger <hedger@nanode.su>
Co-authored-by: Georgii Surkov <37121527+gsurkov@users.noreply.github.com>
* fbt: added -Wundef to compiler options; libs: various small fixes for missing defines; desktop: proper access to current RTOS config
* apps: fixes for FURI_DEBUG handling
* rpc: unified definition checks
* Cleanup various defines use
* Cleanup configs and move SVCall ISR priority configuration to furi_hal_interrupts
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Original pointer can be const
* Back to const icons
* Missed this one
* Simpler string alloc
* Single allocation and header struct for static icons
* Shared allocation and meta struct for animated icons
* Only try to load if dir exists
* Restructure momentum lib
* Use some internal headers
* Swap icons at draw
* Properly init and free, no more original in icon struct
* Implement POC event loop tmers (not all edge cases are handled)
* Use a separate ready list to allow for (re)starting and stopping of timers from callback
* Improve the test application
* Improve timer API and test application
* Improve timeout calculation logic
* Improve timer API, update documentation
* Fix API usage error
* Update doxygen comments
* Revert the old (correct) check
* Improve function naming
* Check whether a timer was on the expired list before processing it
* Implement tick callback
* Add critical sections to improve timer consistency
* Simplify event loop timer API
* Remove redundant search
* Refactor timer logic, use message queue
* Simplify FuriEventLoopTimer API
* Improve event loop timer logic
* Update the f18 target
* Remove superfluous clears
* Correct f18 api symbols
* Fix doxygen comments
* Update .pvsconfig
* Use a double push list instead of deque
* Update .pvsconfig
* Add pending callback functionality
* Restore unprocessed flags when applicable
* Refactor Dolphin app to use FuriEventLoop
* Improve naming
* Update naming some more
* Fix a typo Co-authored-by: Silent <CookiePLMonster@users.noreply.github.com>
* Fix wait time in example
* Bump API version
* Debug: multiple of 25 timings in event loop blink test
* Separate FuriEventLoopTimer to its own set of files
* Improve start time calculation for periodic timers
* Do not use dynamic allocations for timer requests
* Split the tick functionality in separate files, rearrange code
* Improve timer queue handling
* Properly reset GPIO pins in the test app
* Properly initialise GPIO pins in the test app too
* Furi: variable naming in event loop
* Furi: fix spelling in event loop
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: Silent <CookiePLMonster@users.noreply.github.com>
* Add signal API
* Add signal support to loader
* Add signal support to ViewDispatcher
* Remove extra signal definitions
* Fix typos
Co-authored-by: Silent <CookiePLMonster@users.noreply.github.com>
* scripts: runfap: close current app pre-launch
* loader: enable backlight when starting an app
* scripts: removed distfap.py
* Do not expose signal API via ViewDispatcher
* scripts: runfap: iterative retry to launch
* Add a loader signal subcommand
* Furi, Gui: move signal handling from View Dispatcher to Event Loop
Co-authored-by: Silent <CookiePLMonster@users.noreply.github.com>
Co-authored-by: hedger <hedger@nanode.su>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Furi: Fix EventLoop state persisting on same thread after free
* Furi: clear event loop notification state and value on allocation, report unprocessed events on free
* UnitTests: add multiple event loop runs in one thread test
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Cli: top command to replace ps. Furi: ThreadList and thread enumeration routine.
* Sync API Symbols
* Cli: cleanup top output, add memory section. Furi: thread enumeration code cleanup. Fix doxygen and make pvs happy.
* Furi: iterator in thread_list instead of M_EACH, fix memory leak
* Update documentation
* Cli: customizable refres interval for top command
* Furi: add consistentency into float declaration in thread list
* FreeRTOSConfig: remove invalid comment
Co-authored-by: Sergei Gavrilov <who.just.the.doctor@gmail.com>
* FuriHal: properly handle high priority USB IRQ, change CDC decriptor to use separate TX/RX endpoints
* Furi: drop task handle, cleanup casts and memory corrupt in threads
* FuriHal: update max power in USB descriptors
* Furi: properly handle thread free if thread was not started
* Furi crash: meaningful interrupt name instead of id
---------
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Furi: epoll prototype
* Gui: simplify view_dispatcher custom event processing
* Furi: add missing critical sections to epoll
* Furi: add epoll unit tests, fully implement level processing for in and out events
* Furi: properly trigger epoll item event on adding mq, update tests.
* Unit tests: cleanup defines
* Furi: protect epoll from modification in callback
* Furi: rename epoll into event_loop, cleanup api naming
* Sync API Symbols
* Furi: add event loop contract and link api, port mq to new api, cleanup code
* Format Sources
* Furi: cleanup mq and event loop code
* Furi: remove unused staff from message queue
* ApiSymbols: remove event loop from public APIs.
* Fix furi unit tests
---------
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: Georgii Surkov <37121527+gsurkov@users.noreply.github.com>
* Remove unnecessary checks
* Sublime: never insert missing headers
* Cleanup furi defines use
* Cleanup startup. Cleanup linker scripts. Explicitly define all interrupts hadlers, including uninmplemented one.
* Startup routine in C
* Drop assembler startup
* Move linker defines to stm32wb55_linker.h, cleanup naming, unify usage. Mpu: protect last 32b of main stack. Document various obscure things.
* Move furi_hal_switch documentation to appropriate place, use 0x0 for updater jump.
* UnitTests: move all temporary test files into tmp folder
---------
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Use static mutex
* Add static_assert checks
* Use static semaphore
* Fix formatting
* Use static stream buffer
* Use static timer
* Use static event group
* Increase allocation size for stream buffer
* Remove recursive bit from the mutex before freeing
* Prevent service tasks from ever returning
* Use static threads
* Do not realloc memory when changing stack size
* Use FuriSemaphore instead of raw FreeRTOS one in rpc_test
* Remove redundant includes
* Abolish FreeRTOS dynamic allocation
* Improve FuriMutex
* Improve FuriMessageQueue
* Remove redundant comments and parentheses
* Clean up code more
* Create service threads via a dedicated constructor
* Minor code improvements
* Update docs for FuriThread, FuriTimer
* Fix doxygen typo
* Use a bigger buffer for static StreamBuffer
* Furi: remove timer control block only when timer thread have completed all operations
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
