When xTimerDelete is called using a dymanic timer handle, the timer
handle should immediately be considered unusable for any operation;
including checking if the timer is still running. Under high system
loads, that memory region may see fast reuse while furi_timer_free
is sleeping between timer active checks. That reuse could result in
memory at that pointer causing the timer active check to return true.
Rework the furi_timer_delete process (in the case of dynamically
allocated callback memory) to stop the timer, wait for it to stop,
free the memory, and then delete the timer. Timers without dynamically
allocated callback memory are just sent a delete command; no need
to stop it first.
Fixes: ff33bc6aea ("Furi: wait for timer wind down in destructor (#1716)")
Signed-off-by: Kris Bahnsen <Kris@KBEmbedded.com>
* ApiSymbols: add furi_record_destroy
* FuriHal: cleanup serial API, add logging configuration in RTC
* FuriHal: hide private part in _i header. Toolbox: cleanup value index. SystemSettings: logging device and baudrate.
* FuriHal: RTC logging method documentation
* Synchronize API Symbols
* Furi: mark HEAP_PRINT_DEBUG as broken
* FuriHal: furi_hal_serial, add custom IRQ func
* Fix PR review issues
* Implement basic external module detection and echo
* Update api symbols for f18
* Minimally working implementation (can create directory via rpc)
* Make expansion protocol parser a header-only library
* Rename a function
* Improve thread syncronisation
* Implement multi-packet transmissions
* Improve test application
* Clean up expansion worker code
* Send heartbeat when host is ready
* Update API symbols
* Add draft documentation
* Expansion worker: proper timeout and error handling
* Expansion worker: correct TX, do not disable expansion callback
* Expansion protocol: pc side test script
* PC side expansion test: trying to change baudrate
* Working comms between 2 flippers
* Cleaner exit from expansion worker thread
* Better checks
* Add debug logs
* Remove unneeded delays
* Use USART as default expansion port
* Refactor furi_hal_serial_control, fix crash
* Improve furi_hal abstraction, wait for stable rx pin
* Remove rogue include
* Set proper exit reason on RPC error
* Remove rogue comment
* Remove RX stability check as potentially problematic
* Improve expansion_test application
* Remove rogue define
* Give up on TODO
* Implement expansion protocol checksum support
* Update ExpansionModules.md
* RPC: reverse input
* Assets: sync protobuf
* Fix typos
* FuriHal: UART add reception DMA (#3220)
* FuriHal: add DMA serial rx mode
* usb_uart_bridge: switch to working with DMA
* Sync api symbol versions
* FuriHal: update serial docs and api
* FuriHal: Selial added similar API for simple reception mode as with DMA
* FuriHal: Update API target H18
* API: ver API H7
* FuriHal: Serial error processing
* FuriHal: fix furi_hal_serial set baudrate
* Sync api symbols
* FuriHal: cleanup serial isr and various flag handling procedures
* FuriHal: cleanup and simplify serial API
* Debug: update UART Echo serial related flags
* FuriHal: update serial API symbols naming
* Make expansion_test compile
* Remove unneeded file
* Make PVS-studio happy
* Optimise stack usage
* Optimise heap usage, improve api signature
* Fix typo
* Clean up code
* Update expansion_protocol.h
* Fix unit tests
* Add doxygen comments to expansion.h
* Update/add doxygen comments
* Update ExpansionModules.md
* Github: new global code owner
* FuriHal: naming in serial control
* Expansion: check mutex acquire return result
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SkorP <skorpionm@yandex.ru>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
* FuriHal: UART refactoring
* ApiSymbols: add furi_record_destroy
* FuriHal: cleanup serial API, add logging configuration in RTC
* FuriHal: hide private part in _i header. Toolbox: cleanup value index. SystemSettings: logging device and baudrate.
* FuriHal: RTC logging method documentation
* Synchronize API Symbols
* Furi: mark HEAP_PRINT_DEBUG as broken
* FuriHal: furi_hal_serial, add custom IRQ func
* Fix PR review issues
* FuriHal: UART add reception DMA (#3220)
* FuriHal: add DMA serial rx mode
* usb_uart_bridge: switch to working with DMA
* Sync api symbol versions
* FuriHal: update serial docs and api
* FuriHal: Selial added similar API for simple reception mode as with DMA
* FuriHal: Update API target H18
* API: ver API H7
* FuriHal: Serial error processing
* FuriHal: fix furi_hal_serial set baudrate
* Sync api symbols
* FuriHal: cleanup serial isr and various flag handling procedures
* FuriHal: cleanup and simplify serial API
* Debug: update UART Echo serial related flags
* FuriHal: update serial API symbols naming
* FuriHalSerial: various improvements and PR review fixes
* FuriHal: proper ISR function signatures
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SkorP <skorpionm@yandex.ru>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
* FuriHal: retry gauge/charger initialization
* FuriHal: lower logging level for flash known errata
* FuriHal: graceful fail if subghz chip is not working
* Furi: issue stop command even if timer is not active, document timer behavior
* Furi: remove direct FreeRTOS timers use
* Furi: eliminate FreeRTOS headers leak. What did it cost? Everything...
* SubGhz: proper public api for protocols. Format Sources.
* Furi: slightly less redundant declarations
* Desktop: proper types in printf
* Sync API Symbols
* Furi: add timer reset and fix dolphin service, fix unit tests
* Furi: proper timer restart method naming and correct behavior in timer stopped state.
---------
Co-authored-by: hedger <hedger@nanode.su>
* FuriHal: enable HSI in stop mode only if we use STOP0, proper SMPS selected clock assert
* Furi: fix double crash caused by bkpt use outside of debug session
* Libs: update ERC and MGG contrast
* Fix various crashes with LIB_DEBUG=1
* BadUsb: size_t where it should be and proper printf types
* Various fixes and make PVS happy
* FuriHal: proper CCID status and make PVS happy
* boot: update mode: graceful handling of corrupted stage file
---------
Co-authored-by: hedger <hedger@nanode.su>
* More descriptive error messages for the log command
* Log level description improvements
* Log help changes
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: allow nulling null isr
* FuriHal: include interrupt priority 15 as allowed
* Furi: prevent compiler from optimizing arg in r0 of RESTORE_REGISTERS_AND_HALT_MCU
* Lib: adjust default contrast for ERC displays
* Furi: various improvements in check module
* Format Sources
* FurHal: ble early hardfault detection
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
* fbt: added hooks for build & dist environments
* Moved env hooks to an optional file
* Fixed var name
* Added fw origin to device info
* Bumped device info version
* fbt: added FIRMWARE_ORIGIN option. Different implementation for FW_ORIGIN_* C macro.
* api: bumped versions
* fbt: added fbt_options_local.py
* gitignore: cleanup
Co-authored-by: あく <alleteam@gmail.com>
* Furi: properly handle thread free before TCB scrapping, add furi_free - more invasive version of free to memmgr. FuriHal: add DWT comparator api to cortex. Updater, RPC: refactor various thread shanenigans. Code cleanup.
* Rollback free macros and related changes
* hal: device_info: added API version to "firmware.api.major" & "firmware.api.minor"
* FuriHal: bump device info version
Co-authored-by: あく <alleteam@gmail.com>
