Files
Momentum-Firmware/assets/resources/apps_data/nrf24batch/Kitchen Vent.txt

128 lines
2.8 KiB
Plaintext

Info: Kitchen Vent (FanControl)
Address: C8C8C1
Rate: 1
Ch: 122
CRC: 2
DPL: 0
RETR: 0x0F
Resend: 3
Delay_ms: 30
Payload struct: 2,1,1
ROM=0x41;ROM2=0x42;WROM=0x81;WROM2=0x82;RAM=0x51;RAM2=0x52;WRAM=0x91;WRAM2=0x92;PGM=0x61;SET=0xC0
R default: ,,ROM
W default: n,,WROM
Write start: 0,0,0x2F
R: ID*=,0,0x65
R: CO2 level*2[3]=i:4,,ROM2
W: CO2 level*2=,i:4,WROM2
R: Fan speeds=25
W: Fan speeds=,25
R: FanSpeed[3]=i:19
W: FanSpeed=,i:19
R: FanCook speeds=26
W: FanCook speeds=,26
R: FanCookSpeed[3]=i:22
W: FanCookSpeed=,i:22
R: FanOnTime=10
W: FanOnTime=,10
R: FanOffTime=11
W: FanOffTime=,11
R: FanCookOnTime=12
W: FanCookOnTime=,12
R: FanCookOffTime=13
W: FanCookOffTime=,13
R: FanSleep=14
W: FanSleep=,14
R: FanCookSleep=15
W: FanCookSleep=,15
R: SpeedInitIdx=16
W: SpeedInitIdx=,16
R: SpeedKeyIdx=17
W: SpeedKeyIdx=,17
R: IRRemotes=32
W: IRRemotes=,32
R: IRRemotesHash*2[70]=i:33,,ROM2#
W: IRRemotesHash*2=,i:33,WROM2
R: OutPeriod=18
W: OutPeriod=,18
R: Flags=1#
W: Flags=,1
R: RxAddr=2#
W: RxAddr=,2
R: Ch=3
W: Ch=,3
R: OSCCAL_EMEM=0
R: _OSCCAL=0x51,,RAM
W: _OSCCAL=,0x51,WRAM
R: _PORTA=0x39,,RAM
W: _PORTA=,0x3B,WRAM
R: _PORTB=0x36,,RAM
W: _PORTB=,0x38,WRAM
R: _OutPeriod=0x8B,,RAM
W: _OutPeriod=,0x8B,WRAM
R: _Fanspeed=0x74,,RAM
R: _FanOn=0x75,,RAM
R: _FanOnNext=0x73,,RAM
R: _FanOnNextCnt=0x71,,RAM
R: _FanOnLast=0x72,,RAM
R: _IRHashLast*2=0x79,,RAM2#
R: _LED Warning=0x6B,,RAM
W: _LED Warning=,0x6B,WRAM
W: Reset=0xEEEE,14,SET
S: Lamp=,0,SET
S: Fan=,1,SET
S: FanSpdUp=,2,SET
S: FanSpdDn=,3,SET
S: FanSpdSave=,4,SET
S: SetupIR=,5,SET
SBatch: Fan Cooker On: Fan=6
SBatch: Fan On: Fan=3
SBatch: Fan Off: Fan=0
SBatch: Lamp On: Lamp=1
SBatch: Lamp Off: Lamp=0
SBatch: Fan Up: FanSpdUp=0
SBatch: Fan Down: FanSpdDn=0
SBatch: Fan SAVE: FanSpdSave=0;
SBatch: Add new IR: SetupIR=1
RBatch: Work: ID;CO2 level;FanCookSpeed;FanCookOnTime;FanCookOffTime;FanCookSleep;FanSpeed;FanOnTime;FanOffTime;FanSleep
RBatch: Hardware: ID;RxAddr;Ch;SpeedInitIdx;Flags;OutPeriod;IRRemotes;OSCCAL_EMEM
RBatch: All: ID;CO2 level;FanCookSpeed;FanCookOnTime;FanCookOffTime;FanCookSleep;FanSpeed;FanOnTime;FanOffTime;FanSleep;RxAddr;Ch;SpeedInitIdx;Flags;OutPeriod;IRRemotes;IRRemotesHash
WBatch: Init(Cook2spd,Lamp-F2.2): RxAddr=0xC1;Ch=122;CO2 level={950,1050,1200};Fan speeds=1;FanSpeed={1,1,1};FanCook speeds=2;FanCookSpeed={1,2,2};FanSleep=20;FanCookSleep=6;FanOnTime=150;FanCookOnTime=0;FanOffTime=100;FanCookOffTime=0;SpeedInitIdx=0;SpeedKeyIdx=6;Flags=0x0D;OutPeriod=1
WBatch: IRRemotes clear: IRRemotes=0
WBatch: IRRemotes 1 kitchen: IRRemotes=1;IRRemotesHash={0x6DA5,0xFCA5,0x7CA5,0xB425,0x3425,0x1625,0x8525}
WBatch: Fans Speeds: Fan speeds=1;FanSpeed={1,1,1};FanCook speeds=2;FanCookSpeed={1,2,2}
WBatch: LED Warning: _LED Warning=0x10
WBatch: OutPeriod: _OutPeriod=1
WBatch: OSCCAL: _OSCCAL=146
WBatch: CO2 Level: CO2 level={750,850,1000}
WBatch: Reset: Reset