Stream decoded digital voice audio to the browser via ffmpeg pipeline
(dsd-fme 8kHz PCM → ffmpeg → 44.1kHz WAV → chunked HTTP). Persist
frequency/protocol/gain/ppm settings in localStorage so they survive
page navigation. Add bookmark system for saving and recalling frequencies.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
dsd-fme remapped several flags from classic DSD: -fp is ProVoice (not
P25), -fi is NXDN48 (not D-Star), -fv doesn't exist. This caused P25
to trigger ProVoice decoding and D-Star to trigger NXDN48. Corrected
flag table and added C4FM modulation hints for better sync reliability.
Also fixes: device panel showing "DMR" regardless of protocol, signal
activity status flip-flopping between LISTENING and IDLE, and rtl_fm
squelch chopping the bitstream mid-frame. Adds PPM correction and
relax CRC controls for fine-tuning on marginal signals.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Resolve conflicts keeping local GSM tools in kill_all() process list
and weather satellite config settings while merging upstream changes
including GSM spy removal, DMR fixes, USB device probe, APRS crash
fix, and cross-module frequency routing.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Enable sending discovered frequencies from the Listening Post scanner,
signal identification panel, and waterfall display directly to Pager,
433 Sensor, or RTLAMR decoder modes with one click.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Merges upstream changes into fork while preserving weather satellite
(NOAA APT/Meteor LRPT via SatDump), rtlamr, multi-arch build, and
decoder console features from our branch.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The Receiver Count section had no <h3> so it didn't get collapsible
panel styling, rendering as a small out-of-place rectangle. The count
is already shown in the main receiver list panel so this was redundant.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- DMR/P25 digital voice decoder mode with DSD-FME integration
- WebSDR mode with KiwiSDR audio proxy and websocket-client support
- Listening post waterfall/spectrogram visualization and audio streaming
- Dockerfile updates for mbelib and DSD-FME build dependencies
- New tests for DMR, WebSDR, KiwiSDR, waterfall, and signal guess API
- Chart.js date adapter for time-scale axes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a general-purpose SSTV decoder alongside the existing ISS SSTV mode,
supporting USB/LSB/FM modulation on common amateur radio HF/VHF/UHF
frequencies (14.230 MHz USB, 3.845 MHz LSB, etc.) with auto-detection
of modulation from preset frequency table.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix SDR device stuck claimed on capture failure via on_complete callback
- Improve SatDump output parsing to emit all lines (throttled 2s) for real-time feedback
- Extract shared pass prediction into utils/weather_sat_predict.py with trajectory/ground track support
- Add auto-scheduler (utils/weather_sat_scheduler.py) using threading.Timer for unattended captures
- Add scheduler API endpoints (enable/disable/status/passes/skip) with SSE event notifications
- Add countdown timer (D/H/M/S) with imminent/active glow states
- Add 24h timeline bar with colored pass markers and current-time cursor
- Add canvas polar plot showing az/el trajectory arc with cardinal directions
- Add Leaflet ground track map with satellite path and observer marker
- Restructure to 3-column layout (passes | polar+map | gallery) with responsive stacking
- Add auto-schedule toggle in strip bar and sidebar
- Add rtlamr (Go utility meter decoder) to Dockerfile
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Each SDR mode now includes frequency-specific antenna guidance:
- Pager: VHF/UHF dipole info for 153/929 MHz bands
- 433 MHz Sensors: quarter-wave ground plane for ISM band
- Utility Meters: 912 MHz stock antenna tips and upgrades
- APRS: 2m band dipole and commercial options for 144.39 MHz
- SSTV: V-dipole for ISS reception at 145.800 MHz
- AIS: marine VHF antenna for 162 MHz vessel tracking
- Listening Post: wideband discone recommendation with band table
- Meshtastic: LoRa 915/868 MHz antenna upgrades and placement
- ADS-B: 1090 MHz collinear, commercial options, LNA/placement
Each guide includes antenna type, element lengths, placement tips,
and a quick reference table with key specs for the mode.
https://claude.ai/code/session_01FjLTkyELaqh27U1wEXngFQ
The sweep loop's WiFi/BT/RF scan processing had unprotected
timeline_manager.add_observation() calls that could crash an entire
scan iteration, silently preventing all device events from reaching
the frontend. Additionally, scan interval timestamps were only updated
at the end of processing, causing tight retry loops on persistent errors.
- Wrap timeline observation calls in try/except for all three protocols
- Move last_*_scan timestamp updates immediately after scan completes
- Add per-device try/except so one bad device doesn't block others
- Emit sweep_progress after WiFi scan for real-time status visibility
- Log warning when WiFi scan returns 0 networks for easier diagnosis
- Add known_device and score_modifier fields to correlation engine
- Add TSCM scheduling, cases, known devices, and advanced WiFi indicators
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add new "Space" category with Satellite and ISS SSTV modes
- Rename "Scanner" to "Listening Post"
- SSTV now uses global SDR device selector
- Meshtastic map markers more visible (stronger glow, larger size)
- CSS layout fixes using flex instead of fixed heights
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add slow-scan television decoder for receiving images from ISS.
Includes new Space dropdown in navigation grouping Satellite and SSTV modes.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The bias-T checkbox on the main dashboard was not being passed to the
ADS-B and AIS tracking start requests. Added getBiasTEnabled() helper
to each dashboard that reads from shared localStorage, and updated all
start request bodies to include bias_t parameter.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add full telemetry display in node popups including device metrics
(voltage, channel utilization, air TX) and environment sensors
(temperature, humidity, barometric pressure).
Add traceroute functionality with interactive visualization showing
hop paths and SNR values. Includes API endpoints for sending traceroutes
and retrieving results, plus a modal UI for displaying route information.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New Features:
- Meshtastic LoRa mesh network integration
- Real-time message streaming via SSE
- Channel configuration with encryption
- Node information with RSSI/SNR metrics
- Ubertooth One BLE scanner backend
- Passive capture across all 40 BLE channels
- Raw advertising payload access
- Offline mode with bundled assets
- Local Leaflet, Chart.js, and fonts
- Multiple map tile providers
- Settings modal for configuration
Technical Changes:
- New routes: meshtastic.py, offline.py
- New utils: ubertooth_scanner.py, meshtastic.py
- New CSS/JS for meshtastic and settings
- Updated dashboard templates with conditional asset loading
- Added context processor for offline settings
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Agent improvements:
- Add process verification (0.5s delay + poll check) for sensor, pager, APRS, DSC modes
- Prevents silent failures when SDR is busy or tools fail to start
- Returns clear error messages when subprocess exits immediately
Frontend agent integration:
- Add agent routing to all SDR modes (pager, sensor, RTLAMR, APRS, listening post, TSCM)
- Add agent routing to WiFi and Bluetooth modes with polling fallback
- Add agent routing to AIS and DSC dashboards
- Implement "Show All Agents" toggle for Bluetooth mode
- Add agent badges to device/network lists
- Handle controller proxy response format (nested 'result' field)
Controller enhancements:
- Add running_modes_detail endpoint showing device info per mode
- Support SDR conflict detection across modes
Documentation:
- Expand DISTRIBUTED_AGENTS.md with complete API reference
- Add troubleshooting guide and security considerations
- Document all supported modes with tools and data formats
UI/CSS:
- Add agent badge styling for remote vs local sources
- Add WiFi and Bluetooth table agent columns
- Rename "Scanner" to "Listening Post" and "RTLAMR" to "Meters" for clarity
- Change pager filter input from onchange to oninput for real-time filtering
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Backend:
- New utils/wifi/ package with models, scanner, parsers, channel analyzer
- Quick Scan mode using system tools (nmcli, iw, iwlist, airport)
- Deep Scan mode using airodump-ng with monitor mode
- Hidden SSID correlation engine
- Channel utilization analysis with recommendations
- v2 API endpoints at /wifi/v2/* with SSE streaming
- TSCM integration updated to use new scanner (backwards compatible)
Frontend:
- WiFi mode controller (wifi.js) with dual-mode support
- Channel utilization chart component (channel-chart.js)
- Updated wifi.html template with scan mode tabs and export
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix Signal Timeline not receiving events by using SignalTimeline.create()
for TSCM mode to maintain backward compatibility with addEvent() calls
- Lower RF detection thresholds for RTL-SDR compatibility (6dB margin,
-90dBm floor instead of 10dB/-70dBm)
- Reduce RF scan interval from 60s to 30s for quicker feedback
- Enable RF/SDR checkbox by default to match WiFi and Bluetooth
- Update status message when no signals detected
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Removed Baseline section from Bluetooth sidebar (no longer needed)
- Fixed device filter buttons not working (changed display to '' instead
of 'block' to preserve flexbox layout)
- Fixed proximity radar being cut off by bottom panels:
- Added overflow: hidden to radar panel
- Constrained bottom panels to max-height: 120px
- Made radar content respect parent boundaries
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
DBus/BlueZ requires a GLib main loop which Flask doesn't have.
Reordered backend priority: bleak > hcitool > bluetoothctl > dbus
Removed DBus option from UI since it won't work with Flask.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Major changes:
- Add utils/bluetooth/ package with DBus scanner, fallback scanners
(bleak, hcitool, bluetoothctl), device aggregation, and heuristics
- New unified API at /api/bluetooth/ with REST endpoints and SSE streaming
- Device observation aggregation with RSSI statistics and range bands
- Behavioral heuristics: new, persistent, beacon-like, strong+stable
- Frontend components: DeviceCard, MessageCard, RSSISparkline
- TSCM integration via get_tscm_bluetooth_snapshot() helper
- Unit tests for aggregator, heuristics, and API endpoints
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace emojis throughout the codebase with inline SVG icons using
the Icons utility. Remove decorative icons where text labels already
describe the content. Add classification dot CSS for risk indicators.
- Extend Icons utility with comprehensive SVG icon set
- Update navigation, header stats, and action buttons
- Update playback controls and volume icons
- Remove decorative device type and panel header emojis
- Clean up notifications and alert messages
- Add CSS for classification status dots
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace emoji icons with inline SVG for WiFi, Bluetooth, and RF/SDR
indicators. Icons are standard symbols (arc, rune, wave) designed for
screenshot legibility in reports.
- Add Icons utility object in utils.js with SVG generators
- Add icon CSS system with sizing variants and state animations
- Update TSCM scanner indicators and capabilities bar
- Remove decorative sensor type emojis (text labels suffice)
- Keep signal strength SVG bars (already implemented)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Set min-height: 300px on main grid
- Set min-height: 120px on individual panels
- Set min-height: 80px on panel content
- Change dashboard from height: 100% to min-height: 100%
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add verbose_results flag to store full device details in sweep results
- Add non-interactive mode (--non-interactive) to setup.sh
- Add ask_yes_no helper for interactive prompts with TTY detection
- Update reports.py to handle new results structure with fallbacks
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Added rtlamr mode for decoding utility meters (water, gas, electric)
- Starts rtl_tcp server first, then connects rtlamr to it
- Supports multiple message types: SCM, SCM+, IDM, NetIDM, R900, R900 BCD
- Added frequency presets for 912 MHz (NA) and 868 MHz (EU)
- Includes meter ID filtering and unique message options
- Updated setup.sh to check and install rtlamr and rtl_tcp
- Added UI components: navigation button, mode template, JavaScript functions
- Integrated into SDR/RF dropdown menu with lightning bolt icon
- Updates mode indicator with frequency when listening
- Added help documentation and requirements section
- Consolidate sweep config and scan sources into one section
- Group baseline recording and meeting window under "Advanced"
- Create 2x2 grid layout for tool buttons
- Use visual dividers instead of separate sections
- Keep all functionality and IDs intact
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Show all controls directly instead of hiding them in collapsed
sections which was causing confusion.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Redesign the sidebar to be more minimal with collapsible sections
for Settings and Advanced options. Primary sweep action is now
prominently displayed, with tool buttons condensed to compact icons.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Move SDR configuration controls from sidebar to a horizontal function bar
above the map display for better visibility and accessibility. The bar
includes frequency/station/packet stats, region and gain controls, tool
status indicators, and start/stop buttons.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add spectrum monitoring via rtl_power with configurable presets
- Add OpenCelliD tower integration with Leaflet map display
- Add grgsm_scanner integration for passive GSM cell detection (alpha)
- Add rules engine for anomaly detection and findings
- Add baseline recording and comparison system
- Add setup.sh support for gr-gsm installation on Debian/Ubuntu
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Mitch Ross