Replace fragile platform-specific WiFi detection with the same
scanner._detect_interfaces() used by the actual scanning code,
eliminating false "No wireless interfaces found" warnings.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use networksetup instead of deprecated airport utility for macOS WiFi detection
- Fix SDRDevice attribute access (use getattr instead of dict .get())
- Move Detected Threats panel next to RF Signals in 2-column grid
- Always run correlation/identity analysis at sweep end, even if stopped by user
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The sweep loop's WiFi/BT/RF scan processing had unprotected
timeline_manager.add_observation() calls that could crash an entire
scan iteration, silently preventing all device events from reaching
the frontend. Additionally, scan interval timestamps were only updated
at the end of processing, causing tight retry loops on persistent errors.
- Wrap timeline observation calls in try/except for all three protocols
- Move last_*_scan timestamp updates immediately after scan completes
- Add per-device try/except so one bad device doesn't block others
- Emit sweep_progress after WiFi scan for real-time status visibility
- Log warning when WiFi scan returns 0 networks for easier diagnosis
- Add known_device and score_modifier fields to correlation engine
- Add TSCM scheduling, cases, known devices, and advanced WiFi indicators
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Open Notify API (api.open-notify.org) is frequently unreliable,
causing 5-second timeout delays on every ISS position request.
Promote wheretheiss.at as the primary API in both satellite.py
and sstv.py, demoting Open Notify to fallback.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The /wifi/v2/clients endpoint was returning all clients regardless
of query parameters, because a duplicate route in wifi.py took
precedence over the filtered one in wifi_v2.py. Added bssid,
associated, and min_rssi filtering to the active route.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add retry mechanism (3 attempts) for usb_claim_interface errors when
the SDR device hasn't been fully released by a previous process. Also
kill rtl_power alongside rtl_fm during cleanup and increase the USB
release delay.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Issues fixed:
- #113: Display RTL-SDR serial numbers in device selector
- #112: Kill all processes now stops Bluetooth scans
- #111: BLE device list no longer overflows container bounds
- #109: WiFi scanner panels maintain minimum width (no more "imploding")
- #108: Radar device hover no longer causes violent shaking
- #106: "Use GPS" button now uses gpsd for USB GPS devices
- #105: Meter trend text no longer overlaps adjacent columns
- #104: dump1090 errors now provide specific troubleshooting guidance
Changes:
- app.py: Add Bluetooth cleanup to /killall endpoint
- routes/adsb.py: Parse dump1090 stderr for specific error messages
- templates/index.html: Show SDR serial numbers in device dropdown
- static/css/index.css: Fix WiFi/BT panel layouts with proper min-width
- static/css/components/signal-cards.css: Fix meter grid overflow
- static/css/components/proximity-viz.css: Fix radar hover transform
- static/css/settings.css: Add GPS detection spinner
- static/js/components/proximity-radar.js: Add invisible hit areas
- static/js/core/settings-manager.js: Use gpsd before browser geolocation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds POST /updater/restart endpoint that gracefully restarts the
application using os.execv. Cleans up all decoder processes and
global state before replacing the process with a fresh instance.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements centralized tracking of SDR device allocation to prevent
multiple decoders from trying to use the same device simultaneously.
- Add sdr_device_registry with claim/release/status functions in app.py
- Update all SDR-based routes to claim devices on start and release on stop
- Return HTTP 409 with DEVICE_BUSY error when device is already in use
- Clear registry on /killall
- Skip device claims for remote connections (rtl_tcp, remote SBS)
Fixes#100Fixes#101
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When monitor mode is toggled on a remote agent, the controller now
automatically refreshes the agent's capabilities and updates the
database. This keeps the UI interface list in sync without requiring
a manual refresh.
Agent fixes:
- Fix Ctrl+C hang by running cleanup in background thread
- Add force-exit on double Ctrl+C
- Improve exception handling in output reader threads to prevent
bad file descriptor errors on shutdown
- Reduce cleanup timeouts for faster shutdown
Controller/UI fixes:
- Add URL validation for agent registration (check port, protocol)
- Show helpful message when agent is unreachable during registration
- Clarify API key field label (reserved for future use)
- Add client-side URL validation with user-friendly error messages
WiFi agent mode fixes:
- Add polling fallback for deep scan when push mode is disabled
- Polls /controller/agents/{id}/wifi/data every 2 seconds
- Detect running scans when switching to an agent
- Fix scan_mode detection (agent uses params.scan_type)
Allow connecting to WiFi-enabled Meshtastic devices via TCP/IP in
addition to USB/Serial connections. This enables remote monitoring
of mesh nodes that have WiFi capability (T-Beam, Heltec WiFi LoRa, etc).
- Add connection_type parameter ('serial' or 'tcp') to /meshtastic/start
- Add hostname parameter for TCP connections
- Update UI with connection type dropdown and hostname input field
- Show connection type in status responses
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add DopplerTracker class using skyfield for satellite tracking
- Calculate and apply Doppler shift correction (up to ±3.5 kHz at 145.800 MHz)
- Background thread monitors shift and retunes rtl_fm when >500 Hz drift
- New /sstv/doppler endpoint for real-time Doppler info
- Start endpoint accepts latitude/longitude for automatic tracking
Also:
- Add slowrx installation to setup.sh (source build for macOS, apt for Debian)
- Sync observer location to dashboard-specific localStorage keys
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Bump Flask requirement to >=3.0.0 (required for Werkzeug 3.x)
- Make psycopg2 import conditional in routes/adsb.py and utils/adsb_history.py
- ADS-B history features gracefully disabled when PostgreSQL libs unavailable
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add refresh_tle_data() function for reusable TLE updates
- Automatically fetch fresh TLE from CelesTrak when app starts
- Runs in background thread to avoid slowing down startup
- Includes NOAA-20 and NOAA-21 in name mappings
- Gracefully handles failures (uses cached data if offline)
- Existing /update-tle endpoint now uses shared function
This ensures satellite tracking data is always fresh, fixing
inaccurate positions caused by stale TLE data.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add _fetch_iss_realtime() helper function for real-time ISS position
- Satellite position endpoint now uses real-time API for ISS specifically
- Other satellites still use TLE-based calculations
- ISS orbit track still calculated from TLE (for future/past positions)
- Falls back between Open Notify and Where The ISS At APIs
This ensures the satellite dashboard shows accurate ISS position
while maintaining TLE-based tracking for other satellites.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fetch live ISS position from Open Notify API (primary)
- Fallback to "Where The ISS At" API if primary fails
- Remove dependency on potentially outdated local TLE data
- Calculate observer elevation/azimuth using spherical geometry
- Both APIs are free and don't require authentication
This fixes the issue where the ISS position was incorrect due to
the local TLE data being almost a year out of date.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add /sstv/iss-position endpoint that calculates ISS position directly
- Update JS to use new endpoint instead of /satellite/position
- Returns lat, lon, altitude, and optionally elevation/azimuth from observer
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The test_client approach was failing silently. Now calculates ISS
passes directly using skyfield within the sstv route.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add slow-scan television decoder for receiving images from ISS.
Includes new Space dropdown in navigation grouping Satellite and SSTV modes.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Check for new releases from GitHub API with 6-hour cache
- Show toast notification when updates are available
- Add Updates tab in settings for manual checks and preferences
- Support git-based updates with stash handling for local changes
- Persist dismissed versions to avoid repeated notifications
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add QR code generation for sharing Meshtastic channel configurations.
Add qrcode[pil] dependency for QR code generation.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add full telemetry display in node popups including device metrics
(voltage, channel utilization, air TX) and environment sensors
(temperature, humidity, barometric pressure).
Add traceroute functionality with interactive visualization showing
hop paths and SNR values. Includes API endpoints for sending traceroutes
and retrieving results, plus a modal UI for displaying route information.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When multiple serial ports are detected (e.g., /dev/ttyACM0 and /dev/ttyUSB0),
the Meshtastic SDK's auto-detect fails. This adds a /meshtastic/ports endpoint
to list available ports and populates the device dropdown, auto-selecting the
first port when multiple exist.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Smittix