Shows RMS audio level bar and SSTV tone classification (leader/sync/noise)
via SSE during detecting mode, replacing the static "Listening..." state
with actionable signal feedback.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a general-purpose SSTV decoder alongside the existing ISS SSTV mode,
supporting USB/LSB/FM modulation on common amateur radio HF/VHF/UHF
frequencies (14.230 MHz USB, 3.845 MHz LSB, etc.) with auto-detection
of modulation from preset frequency table.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Use networksetup instead of deprecated airport utility for macOS WiFi detection
- Fix SDRDevice attribute access (use getattr instead of dict .get())
- Move Detected Threats panel next to RF Signals in 2-column grid
- Always run correlation/identity analysis at sweep end, even if stopped by user
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The sweep loop's WiFi/BT/RF scan processing had unprotected
timeline_manager.add_observation() calls that could crash an entire
scan iteration, silently preventing all device events from reaching
the frontend. Additionally, scan interval timestamps were only updated
at the end of processing, causing tight retry loops on persistent errors.
- Wrap timeline observation calls in try/except for all three protocols
- Move last_*_scan timestamp updates immediately after scan completes
- Add per-device try/except so one bad device doesn't block others
- Emit sweep_progress after WiFi scan for real-time status visibility
- Log warning when WiFi scan returns 0 networks for easier diagnosis
- Add known_device and score_modifier fields to correlation engine
- Add TSCM scheduling, cases, known devices, and advanced WiFi indicators
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Allow connecting to WiFi-enabled Meshtastic devices via TCP/IP in
addition to USB/Serial connections. This enables remote monitoring
of mesh nodes that have WiFi capability (T-Beam, Heltec WiFi LoRa, etc).
- Add connection_type parameter ('serial' or 'tcp') to /meshtastic/start
- Add hostname parameter for TCP connections
- Update UI with connection type dropdown and hostname input field
- Show connection type in status responses
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add ISS SSTV decoder mode with real-time tracking globe
- Add GitHub update notifications for new releases
- Enhance Meshtastic with QR codes and telemetry display
- Add new Space category for satellite modes
- Fix SoapySDR detection, dump1090 builds, and Flask compatibility
- Update version numbers and changelog
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add new "Space" category with Satellite and ISS SSTV modes
- Rename "Scanner" to "Listening Post"
- SSTV now uses global SDR device selector
- Meshtastic map markers more visible (stronger glow, larger size)
- CSS layout fixes using flex instead of fixed heights
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use real Leaflet map with proper tile layers (same as satellite section)
- ISS marker with pulsing glow animation
- Ground track orbit line showing ISS path
- Map auto-pans to follow ISS position
- Simplified overlay showing position and next pass info
- Responsive layout that adapts to screen size
- Removed custom canvas rendering and continent data
The Leaflet map uses the same tile provider as other sections,
ensuring the ISS position is accurately displayed on a real map.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use simple equirectangular projection for guaranteed accuracy
- Direct linear mapping: lon to x, lat to y (no complex 3D math)
- Show ISS ground track orbit path
- Continent outlines rendered on flat map
- Canvas changed to 300x150 for proper 2:1 aspect ratio
- Updated CSS for rectangular map styling
The 2D map uses a straightforward coordinate transformation
that cannot produce incorrect positions.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Update TLE data with current orbital elements for accurate predictions
- Add location inputs (lat/lon) and GPS button to SSTV stats strip
- Add TLE update button to fetch latest orbital data from CelesTrak
- Add 3D globe visualization showing real-time ISS position
- Display ISS coordinates and altitude below globe
- Auto-refresh ISS position every 5 seconds
- Add NOAA-15, NOAA-18, NOAA-19 satellites to TLE data
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix GPS button not working (pass button element to handler)
- Hide output element in SSTV mode to allow panels to fill space
- Add explicit height rules for SSTV panels to expand vertically
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Location tab to settings modal with lat/lon inputs
- Add GPS detection button for auto-location
- Update SSTV to use saved location for ISS pass predictions
- Fix SSTV panels to use full screen width (remove max-width constraint)
- Improve ISS pass messages to guide users to location settings
- Add checked/last_check fields to update status response
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add slow-scan television decoder for receiving images from ISS.
Includes new Space dropdown in navigation grouping Satellite and SSTV modes.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add QR code generation for sharing Meshtastic channel configurations.
Add qrcode[pil] dependency for QR code generation.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add full telemetry display in node popups including device metrics
(voltage, channel utilization, air TX) and environment sensors
(temperature, humidity, barometric pressure).
Add traceroute functionality with interactive visualization showing
hop paths and SNR values. Includes API endpoints for sending traceroutes
and retrieving results, plus a modal UI for displaying route information.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New Features:
- Meshtastic LoRa mesh network integration
- Real-time message streaming via SSE
- Channel configuration with encryption
- Node information with RSSI/SNR metrics
- Ubertooth One BLE scanner backend
- Passive capture across all 40 BLE channels
- Raw advertising payload access
- Offline mode with bundled assets
- Local Leaflet, Chart.js, and fonts
- Multiple map tile providers
- Settings modal for configuration
Technical Changes:
- New routes: meshtastic.py, offline.py
- New utils: ubertooth_scanner.py, meshtastic.py
- New CSS/JS for meshtastic and settings
- Updated dashboard templates with conditional asset loading
- Added context processor for offline settings
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove duplicated message counters from header (keeping output panel stats)
- Remove syncHeaderStats function and its 500ms polling interval
- Fix icon CSS override that caused stroke-based SVGs to render as solid squares
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace emojis throughout the codebase with inline SVG icons using
the Icons utility. Remove decorative icons where text labels already
describe the content. Add classification dot CSS for risk indicators.
- Extend Icons utility with comprehensive SVG icon set
- Update navigation, header stats, and action buttons
- Update playback controls and volume icons
- Remove decorative device type and panel header emojis
- Clean up notifications and alert messages
- Add CSS for classification status dots
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace emoji icons with inline SVG for WiFi, Bluetooth, and RF/SDR
indicators. Icons are standard symbols (arc, rune, wave) designed for
screenshot legibility in reports.
- Add Icons utility object in utils.js with SVG generators
- Add icon CSS system with sizing variants and state animations
- Update TSCM scanner indicators and capabilities bar
- Remove decorative sensor type emojis (text labels suffice)
- Keep signal strength SVG bars (already implemented)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Set panel height to 200px with overflow scroll
- Add padding-bottom for status bar clearance
- Make dashboard scrollable
- Remove flex constraints causing collapse
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Set min-height: 300px on main grid
- Set min-height: 120px on individual panels
- Set min-height: 80px on panel content
- Change dashboard from height: 100% to min-height: 100%
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Redesign the sidebar to be more minimal with collapsible sections
for Settings and Advanced options. Primary sweep action is now
prominently displayed, with tool buttons condensed to compact icons.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Move SDR configuration controls from sidebar to a horizontal function bar
above the map display for better visibility and accessibility. The bar
includes frequency/station/packet stats, region and gain controls, tool
status indicators, and start/stop buttons.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Backend changes (routes/aprs.py):
- Remove -q h flag from direwolf to enable audio level output
- Add parse_audio_level() to extract levels from direwolf output
- Add rate-limiting (max 10 updates/sec, min 2-level change)
- Push meter events to SSE queue as type='meter'
Frontend changes:
- Add signal meter widget to APRS sidebar
- Horizontal bar gauge with gradient (green->cyan->yellow->red)
- Numeric level display (0-100)
- "BURST" indicator for levels >70
- Status text (weak/moderate/strong signal)
- "No RF activity" state after 5 seconds of silence
- CSS styles in static/css/modes/aprs.css
Also added UK region to dropdown (same freq as Europe: 144.800)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Extract inline CSS to static/css/modes/ (acars, aprs, tscm)
- Create HTML partials for all 9 modes in templates/partials/modes/
- Reduce index.html from 11,862 to 10,281 lines (~15% reduction)
- Use Jinja2 includes for cleaner template organization
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
