Commit Graph

17 Commits

Author SHA1 Message Date
ribs
377519fd95 feat: add OOK/AM envelope detection mode to Morse decoder
Re-implements envelope detection on top of the rewritten Morse decoder.
Addresses PR #160 review feedback:
- Rebase: rebuilt on current upstream/main (lifecycle state machine)
- Gap thresholds: 2.0/5.0 for envelope only; goertzel keeps 2.6/6.0
- Frequency validation: max_mhz=1766 for envelope, 30 for goertzel
- Tests: EnvelopeDetector unit tests + envelope-mode decoder test
- Envelope uses direct magnitude threshold (no SNR/noise ref)
- Goertzel path completely unchanged

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-27 10:35:56 -08:00
Smittix
818d9c9f90 morse: fix stop timeout causing restart loop via checkStatus
When the stop POST timed out (5s), lifecycle was set to 'idle' on error,
allowing checkStatus to see running=true and reconnect SSE. Now:
- stop .then() stays in 'stopping' on timeout/error instead of going idle
- checkStatus skips reconnect when lifecycle is 'stopping' post-timeout
  but still transitions to idle when server confirms running=false
- LOCAL_STOP_TIMEOUT_MS raised from 5s to 12s to match server cleanup time

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-26 22:17:26 +00:00
Smittix
dc0775f7df morse: guard in-flight status polls from overriding stop state
The previous stopPromise guard only prevented new polls from being
dispatched. Polls already in-flight before stop was clicked could still
return with running=true and override the stopping lifecycle, causing
SSE reconnection and an apparent restart loop. Add a second guard in
the .then() handler to check stopPromise/lifecycle before acting.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-26 22:04:32 +00:00
Smittix
c0fb22124b morse: fix stop restart loop and lower SNR threshold for decoding
Guard checkStatus() against in-flight stop to prevent status poller
from overriding stopping state and reconnecting SSE. Lower SNR floor
from 1.3 to 1.15 to accommodate weaker CW signals. Add SNR/noise_ref
to scope events and metrics for real-time threshold debugging.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-26 21:57:08 +00:00
Smittix
97b10b3ac9 morse: fix SNR threshold for real CW and stop timeout
Widen noise detector offset from ±100Hz to ±200Hz to reduce spectral
leakage into the noise reference, and scale threshold_multiplier for
SNR space (2.8 → 1.54) so real CW signals reliably trigger tone
detection instead of producing all-E's at 60 WPM.

Fix misleading "decoder startup" timeout message on stop requests and
increase stop timeout from 2.2s to 5s.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-26 21:30:43 +00:00
Smittix
24d1777e63 morse: add multimon decoder alias fallback and clear stale idle scope 2026-02-26 17:43:23 +00:00
Smittix
d3b737c19b Switch Morse startup to IQ-first and harden timeout handling 2026-02-26 13:44:04 +00:00
Smittix
a50d200af4 Prevent Morse start timeout aborts on slow startup 2026-02-26 12:39:31 +00:00
Smittix
806bc1397a Keep Morse panels visible and persist startup error diagnostics 2026-02-26 11:38:49 +00:00
Smittix
8eb4ff41e2 Improve Morse stream startup compatibility and diagnostics 2026-02-26 11:15:45 +00:00
Smittix
286ab53d26 Fix Morse mode lifecycle stop hangs and rebuild CW decoder 2026-02-26 11:03:00 +00:00
Smittix
bfae73cabf Forward rtl_fm stderr to Morse frontend diagnostic log
rtl_fm prints device info, tuning, and errors to stderr but the morse
route only logged these server-side. Now stderr lines are forwarded to
the morse queue as info events, displayed in a compact diagnostic log
below the scope canvas. After 10s with no audio data, the scope text
escalates to prompt the user to check the SDR log.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-26 09:43:28 +00:00
Smittix
c0c066904c Fix Morse decoder scope events not reaching frontend
Replace blocking rtl_stdout.read() with select()+os.read() so the
decoder thread emits diagnostic heartbeat scope events when rtl_fm
produces no PCM data (common in direct sampling mode). Add waiting-state
rendering in the scope canvas and hide the generic placeholder/status
bar for morse mode.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-26 09:30:58 +00:00
Smittix
0bf8341b6c Fix Morse mode HF reception, stop button, and UX guidance
Enable direct sampling (-D 2) for RTL-SDR at HF frequencies below 24 MHz
so rtl_fm can actually receive CW signals. Add startup health check to
detect immediate rtl_fm failures. Push stopped status event from decoder
thread on EOF so the frontend auto-resets. Add frequency placeholder and
help text. Fix stop button silently swallowing errors.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-26 08:43:51 +00:00
Smittix
dc7c05b03f Fix welcome dashboard jitter and refine Morse mode UI
Fix "What's New" section shifting up/down on smaller screens (#157) by
isolating the logo pulse animation to its own compositing layer, stabilizing
the scrollbar gutter, and pinning the welcome container dimensions.

Morse mode improvements: relocate scope and decoded output panels to the
main content area, use shared SDR device controls, and reduce panel heights
for better layout.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-25 23:26:47 +00:00
Smittix
a50f77629c Fix Morse mode button styling to match standard UI patterns
Use run-btn/stop-btn classes and bottom placement instead of
btn-primary/btn-danger in a flex section, and preset-btn class
for band presets. Aligns with all other mode panels.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-25 21:18:35 +00:00
Smittix
ee9356c358 Add CW/Morse code decoder mode
New signal mode for decoding Morse code (CW) transmissions via SDR.
Includes route blueprint, utility decoder, frontend UI, and tests.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-25 20:58:48 +00:00