Resolve conflicts keeping local GSM tools in kill_all() process list
and weather satellite config settings while merging upstream changes
including GSM spy removal, DMR fixes, USB device probe, APRS crash
fix, and cross-module frequency routing.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Enable sending discovered frequencies from the Listening Post scanner,
signal identification panel, and waterfall display directly to Pager,
433 Sensor, or RTLAMR decoder modes with one click.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Remove all GSM cellular intelligence features including tower scanning,
signal monitoring, rogue detection, crowd density analysis, and
OpenCellID integration across routes, templates, utils, tests, and
build configuration.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Parse tshark GSM field values with int(value, 0) instead of int(value)
to auto-detect hex 0x-prefixed output (e.g. 0x039e for TMSI/LAC/CID).
Without this, every tshark line with hex values fails to parse, causing
0 devices to be captured during monitoring.
Also add API Keys tab to Settings modal for configuring OpenCellID key
via the UI (in addition to env var), with status display and usage bar.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Merges upstream changes into fork while preserving weather satellite
(NOAA APT/Meteor LRPT via SatDump), rtlamr, multi-arch build, and
decoder console features from our branch.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The Receiver Count section had no <h3> so it didn't get collapsible
panel styling, rendering as a small out-of-place rectangle. The count
is already shown in the main receiver list panel so this was redundant.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- DMR/P25 digital voice decoder mode with DSD-FME integration
- WebSDR mode with KiwiSDR audio proxy and websocket-client support
- Listening post waterfall/spectrogram visualization and audio streaming
- Dockerfile updates for mbelib and DSD-FME build dependencies
- New tests for DMR, WebSDR, KiwiSDR, waterfall, and signal guess API
- Chart.js date adapter for time-scale axes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a general-purpose SSTV decoder alongside the existing ISS SSTV mode,
supporting USB/LSB/FM modulation on common amateur radio HF/VHF/UHF
frequencies (14.230 MHz USB, 3.845 MHz LSB, etc.) with auto-detection
of modulation from preset frequency table.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix SDR device stuck claimed on capture failure via on_complete callback
- Improve SatDump output parsing to emit all lines (throttled 2s) for real-time feedback
- Extract shared pass prediction into utils/weather_sat_predict.py with trajectory/ground track support
- Add auto-scheduler (utils/weather_sat_scheduler.py) using threading.Timer for unattended captures
- Add scheduler API endpoints (enable/disable/status/passes/skip) with SSE event notifications
- Add countdown timer (D/H/M/S) with imminent/active glow states
- Add 24h timeline bar with colored pass markers and current-time cursor
- Add canvas polar plot showing az/el trajectory arc with cardinal directions
- Add Leaflet ground track map with satellite path and observer marker
- Restructure to 3-column layout (passes | polar+map | gallery) with responsive stacking
- Add auto-schedule toggle in strip bar and sidebar
- Add rtlamr (Go utility meter decoder) to Dockerfile
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Each SDR mode now includes frequency-specific antenna guidance:
- Pager: VHF/UHF dipole info for 153/929 MHz bands
- 433 MHz Sensors: quarter-wave ground plane for ISM band
- Utility Meters: 912 MHz stock antenna tips and upgrades
- APRS: 2m band dipole and commercial options for 144.39 MHz
- SSTV: V-dipole for ISS reception at 145.800 MHz
- AIS: marine VHF antenna for 162 MHz vessel tracking
- Listening Post: wideband discone recommendation with band table
- Meshtastic: LoRa 915/868 MHz antenna upgrades and placement
- ADS-B: 1090 MHz collinear, commercial options, LNA/placement
Each guide includes antenna type, element lengths, placement tips,
and a quick reference table with key specs for the mode.
https://claude.ai/code/session_01FjLTkyELaqh27U1wEXngFQ
The sweep loop's WiFi/BT/RF scan processing had unprotected
timeline_manager.add_observation() calls that could crash an entire
scan iteration, silently preventing all device events from reaching
the frontend. Additionally, scan interval timestamps were only updated
at the end of processing, causing tight retry loops on persistent errors.
- Wrap timeline observation calls in try/except for all three protocols
- Move last_*_scan timestamp updates immediately after scan completes
- Add per-device try/except so one bad device doesn't block others
- Emit sweep_progress after WiFi scan for real-time status visibility
- Log warning when WiFi scan returns 0 networks for easier diagnosis
- Add known_device and score_modifier fields to correlation engine
- Add TSCM scheduling, cases, known devices, and advanced WiFi indicators
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add help modal system with keyboard shortcuts reference
- Add Main Dashboard button in navigation bar
- Make settings modal accessible from all dashboards
- Dashboard CSS improvements and consistency fixes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Display connected clients for access points in detail drawer
- Real-time client updates via SSE streaming
- Client cards show MAC, vendor, RSSI, probed SSIDs, and last seen
- Count badge in Connected Clients header
Other changes:
- Updated aircraft database
- CSS and template refinements
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add new "Space" category with Satellite and ISS SSTV modes
- Rename "Scanner" to "Listening Post"
- SSTV now uses global SDR device selector
- Meshtastic map markers more visible (stronger glow, larger size)
- CSS layout fixes using flex instead of fixed heights
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix GPS button not working (pass button element to handler)
- Hide output element in SSTV mode to allow panels to fill space
- Add explicit height rules for SSTV panels to expand vertically
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Location tab to settings modal with lat/lon inputs
- Add GPS detection button for auto-location
- Update SSTV to use saved location for ISS pass predictions
- Fix SSTV panels to use full screen width (remove max-width constraint)
- Improve ISS pass messages to guide users to location settings
- Add checked/last_check fields to update status response
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add slow-scan television decoder for receiving images from ISS.
Includes new Space dropdown in navigation grouping Satellite and SSTV modes.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Check for new releases from GitHub API with 6-hour cache
- Show toast notification when updates are available
- Add Updates tab in settings for manual checks and preferences
- Support git-based updates with stash handling for local changes
- Persist dismissed versions to avoid repeated notifications
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The bias-T checkbox on the main dashboard was not being passed to the
ADS-B and AIS tracking start requests. Added getBiasTEnabled() helper
to each dashboard that reads from shared localStorage, and updated all
start request bodies to include bias_t parameter.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Reverts the utility bar feature and disclaimer timing changes that
caused the disclaimer to flash on screen for users who had already
accepted it.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Show disclaimer BEFORE welcome page on first visit (was showing after)
- Add shared utility-bar.html partial with theme, animations, settings, help
- Include utility bar on Aircraft, Satellite, and Vessels dashboards
- Support ?settings=open and ?help=open URL params from dashboards
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add full telemetry display in node popups including device metrics
(voltage, channel utilization, air TX) and environment sensors
(temperature, humidity, barometric pressure).
Add traceroute functionality with interactive visualization showing
hop paths and SNR values. Includes API endpoints for sending traceroutes
and retrieving results, plus a modal UI for displaying route information.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Merged the two gear icons in the header bar into one unified Settings modal.
Added a "Tools" tab to display dependency status, removing the separate
dependencies modal and button.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The JavaScript checks for 'statusJetbrains' but the HTML had
'statusJetBrains' causing the status check to fail.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New Features:
- Meshtastic LoRa mesh network integration
- Real-time message streaming via SSE
- Channel configuration with encryption
- Node information with RSSI/SNR metrics
- Ubertooth One BLE scanner backend
- Passive capture across all 40 BLE channels
- Raw advertising payload access
- Offline mode with bundled assets
- Local Leaflet, Chart.js, and fonts
- Multiple map tile providers
- Settings modal for configuration
Technical Changes:
- New routes: meshtastic.py, offline.py
- New utils: ubertooth_scanner.py, meshtastic.py
- New CSS/JS for meshtastic and settings
- Updated dashboard templates with conditional asset loading
- Added context processor for offline settings
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Agent improvements:
- Add process verification (0.5s delay + poll check) for sensor, pager, APRS, DSC modes
- Prevents silent failures when SDR is busy or tools fail to start
- Returns clear error messages when subprocess exits immediately
Frontend agent integration:
- Add agent routing to all SDR modes (pager, sensor, RTLAMR, APRS, listening post, TSCM)
- Add agent routing to WiFi and Bluetooth modes with polling fallback
- Add agent routing to AIS and DSC dashboards
- Implement "Show All Agents" toggle for Bluetooth mode
- Add agent badges to device/network lists
- Handle controller proxy response format (nested 'result' field)
Controller enhancements:
- Add running_modes_detail endpoint showing device info per mode
- Support SDR conflict detection across modes
Documentation:
- Expand DISTRIBUTED_AGENTS.md with complete API reference
- Add troubleshooting guide and security considerations
- Document all supported modes with tools and data formats
UI/CSS:
- Add agent badge styling for remote vs local sources
- Add WiFi and Bluetooth table agent columns
- Rename "Scanner" to "Listening Post" and "RTLAMR" to "Meters" for clarity
- Change pager filter input from onchange to oninput for real-time filtering
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Backend:
- New utils/wifi/ package with models, scanner, parsers, channel analyzer
- Quick Scan mode using system tools (nmcli, iw, iwlist, airport)
- Deep Scan mode using airodump-ng with monitor mode
- Hidden SSID correlation engine
- Channel utilization analysis with recommendations
- v2 API endpoints at /wifi/v2/* with SSE streaming
- TSCM integration updated to use new scanner (backwards compatible)
Frontend:
- WiFi mode controller (wifi.js) with dual-mode support
- Channel utilization chart component (channel-chart.js)
- Updated wifi.html template with scan mode tabs and export
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix Signal Timeline not receiving events by using SignalTimeline.create()
for TSCM mode to maintain backward compatibility with addEvent() calls
- Lower RF detection thresholds for RTL-SDR compatibility (6dB margin,
-90dBm floor instead of 10dB/-70dBm)
- Reduce RF scan interval from 60s to 30s for quicker feedback
- Enable RF/SDR checkbox by default to match WiFi and Bluetooth
- Update status message when no signals detected
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Removed Baseline section from Bluetooth sidebar (no longer needed)
- Fixed device filter buttons not working (changed display to '' instead
of 'block' to preserve flexbox layout)
- Fixed proximity radar being cut off by bottom panels:
- Added overflow: hidden to radar panel
- Constrained bottom panels to max-height: 120px
- Made radar content respect parent boundaries
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Mitch Ross