Auto_rx reads many config keys without defaults and crashes if they're
missing, even for disabled features like email. Include every section
and key from the example config to prevent missing-key errors.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The config format changed significantly: SDR settings moved to [sdr_1],
[positioning] became [location], and many sections are now required.
Also enable payload_summary UDP output so telemetry reaches our listener.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Pass config file path (not directory) to auto_rx -c flag
- Use absolute paths in generated station.cfg since auto_rx runs
with cwd set to its install directory
- Teach dependency checker about auto_rx.py at /opt install path
so the "missing dependency" banner no longer appears
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The subprocess was launched with bare 'python' which on Debian doesn't
exist (python3 only) and wouldn't have access to the venv-installed
radiosonde dependencies anyway. Using sys.executable ensures the same
interpreter (with all installed packages) is used.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move adsb_active_device/sdr_type assignment to immediately after
claim_sdr_device so stop_adsb() can always release the device, even
during startup. Sync sdr_type_str after SDRType fallback to prevent
claim/release key mismatch. Clear active device on all error paths.
Replace blind 3s sleep for dump1090 readiness with port-polling loop
(100ms intervals, 3s max). Replace subprocess.run() in rtl_test probe
with Popen + select-based early termination on success/error detection.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Integrate radiosonde_auto_rx for automatic weather balloon detection and
decoding on 400-406 MHz. Includes UDP telemetry parsing, Leaflet map with
altitude-colored markers and trajectory tracks, SDR device registry
integration, setup script installation, and Docker support.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The registry used plain int keys (device index), so HackRF at index 0
and RTL-SDR at index 0 would collide. Changed to composite string keys
("sdr_type:index") so each SDR type+index pair is tracked independently.
Updated all route callers, frontend device selectors, and session restore.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Switch direwolf subprocess output from PIPE to PTY (pseudo-terminal),
forcing line-buffered output so packets arrive immediately instead of
waiting for a 4-8KB pipe buffer to fill. Matches the proven pattern
used by pager mode.
Also enhances direwolf config with FIX_BITS error correction and
disables unused AGWPE/KISS server ports.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add third location fallback to utils/constants (London 51.5074/-0.1278)
so location always resolves even without GPS or env vars configured
- Remove min-height from sys-card to eliminate wasted space
- Switch System Info to vertical key-value layout filling the card
- Clean up OS string (strip glibc suffix), use locale date for boot time
- Bump info grid font size from 11px to 12px for readability
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace broken app.gps_state lookup with utils.gps.get_current_position()
and return GPS metadata (fix quality, satellites, accuracy). Shrink location
card to single-column with 200px globe, move System Info into row 2.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add SVG arc gauge, per-core CPU bars, temperature sparkline, network
interface monitoring with bandwidth deltas, disk I/O rates, 3D globe
with observer location, weather overlay, battery/fan/throttle support,
and process grid layout. New /system/location and /system/weather endpoints.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Real-time dashboard for host metrics (CPU, memory, disk, temperatures),
active decoder process status, and SDR device enumeration via SSE streaming.
Auto-connects when entering the mode with graceful psutil fallback.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Switch decoder subprocess from text mode to binary mode and decode
each line with errors='replace' so corrupted radio bytes (e.g. 0xf7)
are substituted instead of raising UnicodeDecodeError after long runs.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Filter decoder-thread 'stopped' status events that race with the route
lifecycle, causing the frontend to drop back to idle on first start.
Pull noise floor upward using adjacent-frequency Goertzel reference when
warmup calibration runs before AGC converges, preventing permanent
tone-on with zero character decodes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The multimon-ng MORSE_CW decoder never reliably decoded characters.
Switch live decode to use the existing morse_decoder_thread() which
wraps MorseDecoder with Goertzel tone detection, adaptive thresholds,
and proper timing estimation — eliminating multimon-ng, PTY plumbing,
and the relay thread from the CW pipeline entirely.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add bufsize=0 to Popen for raw FileIO instead of BufferedReader, and
start decoder/stderr threads immediately before sleep+poll so stdout
is read without delay — matching the working pager pattern.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
rtl_fm prints device info, tuning, and errors to stderr but the morse
route only logged these server-side. Now stderr lines are forwarded to
the morse queue as info events, displayed in a compact diagnostic log
below the scope canvas. After 10s with no audio data, the scope text
escalates to prompt the user to check the SDR log.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Enable direct sampling (-D 2) for RTL-SDR at HF frequencies below 24 MHz
so rtl_fm can actually receive CW signals. Add startup health check to
detect immediate rtl_fm failures. Push stopped status event from decoder
thread on EOF so the frontend auto-resets. Add frequency placeholder and
help text. Fix stop button silently swallowing errors.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
validate_frequency() defaults to 24-1766 MHz (VHF/UHF range), but Morse/CW
operates on HF bands (0.5-30 MHz). Pass explicit min/max to allow HF frequencies.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add synchronous startup verification after Popen() — sleep 0.5s and poll
the process before returning to the caller. If SatDump exits immediately
(missing device, bad args), raise RuntimeError with the actual error
message instead of returning status: 'started'. Keep a shorter (2s) async
backup check for slower failures.
Also fix --source_id handling: omit the flag entirely when no serial number
is found instead of passing "0" which SatDump may reject. Change start()
and start_from_file() to return (bool, str|None) tuples so error messages
propagate through to the HTTP response.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
TSCM RF scan now auto-detects HackRF via SDRFactory and uses
hackrf_sweep as an alternative to rtl_power. Also includes
improvements to listening post, rtlamr, weather satellite,
SubGHz, Meshtastic, SSTV, WeFax, and process monitor modules.
Fixes#154
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New signal mode for decoding Morse code (CW) transmissions via SDR.
Includes route blueprint, utility decoder, frontend UI, and tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add pre-flight check for I/Q capture binary before spawning process
- Capture stderr from I/Q process for better error diagnostics
- Sync effective span value back to UI when backend adjusts it
- Use get_tool_path('rx_sdr') in Airspy, HackRF, LimeSDR, and SDRPlay
command builders to support custom install locations
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Make stopAprs() async and await backend stop completion before
re-enabling the Start button, preventing race where a late stop
request kills newly started processes
- Add cache-buster param to EventSource URL to prevent browser
SSE connection reuse between stop/start cycles
- Capture aprs_active_device locally in stream_aprs_output so the
old thread's finally block doesn't release a device claimed by
a new session
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace hardcoded rtl_fm with SDRFactory abstraction layer so WeFax works
with any supported SDR hardware, matching the pattern used by APRS and
other modes. RTL-SDR direct sampling flag preserved for HF reception.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
