Agent fixes:
- Fix Ctrl+C hang by running cleanup in background thread
- Add force-exit on double Ctrl+C
- Improve exception handling in output reader threads to prevent
bad file descriptor errors on shutdown
- Reduce cleanup timeouts for faster shutdown
Controller/UI fixes:
- Add URL validation for agent registration (check port, protocol)
- Show helpful message when agent is unreachable during registration
- Clarify API key field label (reserved for future use)
- Add client-side URL validation with user-friendly error messages
WiFi agent mode fixes:
- Add polling fallback for deep scan when push mode is disabled
- Polls /controller/agents/{id}/wifi/data every 2 seconds
- Detect running scans when switching to an agent
- Fix scan_mode detection (agent uses params.scan_type)
- Skip RTL-SDR Blog driver prompt if rtl_test already exists
- Skip DVB blacklist prompt if blacklist file already exists
- Only prompt user when configuration is actually needed
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
slowrx uses a simple Makefile, not CMake. Remove unnecessary cmake
dependency and fix the build process.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Allow connecting to WiFi-enabled Meshtastic devices via TCP/IP in
addition to USB/Serial connections. This enables remote monitoring
of mesh nodes that have WiFi capability (T-Beam, Heltec WiFi LoRa, etc).
- Add connection_type parameter ('serial' or 'tcp') to /meshtastic/start
- Add hostname parameter for TCP connections
- Update UI with connection type dropdown and hostname input field
- Show connection type in status responses
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
If slowrx is not available via apt, build from source with required
dependencies (libfftw3-dev, libsndfile1-dev, libgtk-3-dev, libasound2-dev,
libpulse-dev).
Matches the existing fallback pattern used for macOS.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add DopplerTracker class using skyfield for satellite tracking
- Calculate and apply Doppler shift correction (up to ±3.5 kHz at 145.800 MHz)
- Background thread monitors shift and retunes rtl_fm when >500 Hz drift
- New /sstv/doppler endpoint for real-time Doppler info
- Start endpoint accepts latitude/longitude for automatic tracking
Also:
- Add slowrx installation to setup.sh (source build for macOS, apt for Debian)
- Sync observer location to dashboard-specific localStorage keys
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The sensor field mapping only handled pressure_hPa (weather station
barometric pressure), causing TPMS tire pressure data to not display.
Added mappings for TPMS-specific rtl_433 field names:
- pressure_PSI (common in US TPMS sensors)
- pressure_kPa
- tire_pressure_kPa
- flags/state (tire state indicators)
Fixes#95
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add ISS SSTV decoder mode with real-time tracking globe
- Add GitHub update notifications for new releases
- Enhance Meshtastic with QR codes and telemetry display
- Add new Space category for satellite modes
- Fix SoapySDR detection, dump1090 builds, and Flask compatibility
- Update version numbers and changelog
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add new "Space" category with Satellite and ISS SSTV modes
- Rename "Scanner" to "Listening Post"
- SSTV now uses global SDR device selector
- Meshtastic map markers more visible (stronger glow, larger size)
- CSS layout fixes using flex instead of fixed heights
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Set DYLD_LIBRARY_PATH and SOAPY_SDR_ROOT environment variables when
running SoapySDRUtil on macOS so Homebrew-installed modules (HackRF,
LimeSDR, etc.) are properly detected.
Fixes#77
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Remove -Werror flag and add explicit RTLSDR=yes to prevent build
failures on newer GCC versions in Docker builds.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
System apt packages may install Flask 2.x which is incompatible with
Werkzeug 3.x. Add explicit upgrade after pip install to ensure Flask 3.0+.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Bump Flask requirement to >=3.0.0 (required for Werkzeug 3.x)
- Make psycopg2 import conditional in routes/adsb.py and utils/adsb_history.py
- ADS-B history features gracefully disabled when PostgreSQL libs unavailable
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Strip -Werror from FlightAware Makefile before building to prevent
GCC warnings being treated as fatal errors (fixes spinner[4] issue)
- Replace abandoned antirez/dump1090 fallback with actively-maintained
wiedehopf/readsb
Fixes#92
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add refresh_tle_data() function for reusable TLE updates
- Automatically fetch fresh TLE from CelesTrak when app starts
- Runs in background thread to avoid slowing down startup
- Includes NOAA-20 and NOAA-21 in name mappings
- Gracefully handles failures (uses cached data if offline)
- Existing /update-tle endpoint now uses shared function
This ensures satellite tracking data is always fresh, fixing
inaccurate positions caused by stale TLE data.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add _fetch_iss_realtime() helper function for real-time ISS position
- Satellite position endpoint now uses real-time API for ISS specifically
- Other satellites still use TLE-based calculations
- ISS orbit track still calculated from TLE (for future/past positions)
- Falls back between Open Notify and Where The ISS At APIs
This ensures the satellite dashboard shows accurate ISS position
while maintaining TLE-based tracking for other satellites.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fetch live ISS position from Open Notify API (primary)
- Fallback to "Where The ISS At" API if primary fails
- Remove dependency on potentially outdated local TLE data
- Calculate observer elevation/azimuth using spherical geometry
- Both APIs are free and don't require authentication
This fixes the issue where the ISS position was incorrect due to
the local TLE data being almost a year out of date.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use real Leaflet map with proper tile layers (same as satellite section)
- ISS marker with pulsing glow animation
- Ground track orbit line showing ISS path
- Map auto-pans to follow ISS position
- Simplified overlay showing position and next pass info
- Responsive layout that adapts to screen size
- Removed custom canvas rendering and continent data
The Leaflet map uses the same tile provider as other sections,
ensuring the ISS position is accurately displayed on a real map.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use simple equirectangular projection for guaranteed accuracy
- Direct linear mapping: lon to x, lat to y (no complex 3D math)
- Show ISS ground track orbit path
- Continent outlines rendered on flat map
- Canvas changed to 300x150 for proper 2:1 aspect ratio
- Updated CSS for rectangular map styling
The 2D map uses a straightforward coordinate transformation
that cannot produce incorrect positions.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix x-axis mirroring for proper globe viewing orientation
- Adjust rotation formula to use lon - rotation instead of lon + rotation
- Globe now correctly shows landmasses relative to ISS position
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use actual ISS coordinates with globe rotation instead of fixed lon=0
- Fix orbit trail to use actual longitude offsets from ISS position
- Trail now properly follows behind ISS based on orbital path
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add geographically accurate continent outlines including:
- North America with proper coastline detail (Alaska, Florida, Gulf of Mexico)
- Greenland, Iceland, UK/Ireland as separate landmasses
- Central and South America with accurate shapes
- Europe with Scandinavia separated
- Africa with Madagascar
- Middle East/Arabian Peninsula
- Asia with India, Southeast Asia, Korea, Japan, Taiwan
- Philippines and Indonesia archipelago
- Australia and New Zealand
- Sri Lanka
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Added simplified continent outlines (N/S America, Europe, Africa, Asia, Australia)
- Proper 3D orthographic projection with rotation
- Globe rotates to center on ISS position
- Green landmasses on blue ocean background
- ISS shown in yellow/orange with orbit trail
- Lat/lon grid lines properly projected on sphere
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Globe view centers on ISS longitude so it's always visible
- Added console logging for debugging position updates
- Increased ISS marker size and glow for better visibility
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add /sstv/iss-position endpoint that calculates ISS position directly
- Update JS to use new endpoint instead of /satellite/position
- Returns lat, lon, altitude, and optionally elevation/azimuth from observer
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The test_client approach was failing silently. Now calculates ISS
passes directly using skyfield within the sstv route.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Update TLE data with current orbital elements for accurate predictions
- Add location inputs (lat/lon) and GPS button to SSTV stats strip
- Add TLE update button to fetch latest orbital data from CelesTrak
- Add 3D globe visualization showing real-time ISS position
- Display ISS coordinates and altitude below globe
- Auto-refresh ISS position every 5 seconds
- Add NOAA-15, NOAA-18, NOAA-19 satellites to TLE data
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix GPS button not working (pass button element to handler)
- Hide output element in SSTV mode to allow panels to fill space
- Add explicit height rules for SSTV panels to expand vertically
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Location tab to settings modal with lat/lon inputs
- Add GPS detection button for auto-location
- Update SSTV to use saved location for ISS pass predictions
- Fix SSTV panels to use full screen width (remove max-width constraint)
- Improve ISS pass messages to guide users to location settings
- Add checked/last_check fields to update status response
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add slow-scan television decoder for receiving images from ISS.
Includes new Space dropdown in navigation grouping Satellite and SSTV modes.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Check for new releases from GitHub API with 6-hour cache
- Show toast notification when updates are available
- Add Updates tab in settings for manual checks and preferences
- Support git-based updates with stash handling for local changes
- Persist dismissed versions to avoid repeated notifications
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add QR code generation for sharing Meshtastic channel configurations.
Add qrcode[pil] dependency for QR code generation.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The bias-T checkbox on the main dashboard was not being passed to the
ADS-B and AIS tracking start requests. Added getBiasTEnabled() helper
to each dashboard that reads from shared localStorage, and updated all
start request bodies to include bias_t parameter.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add inline script in <head> that checks localStorage before page renders
- If disclaimer not accepted, hide welcome page via injected CSS
- Show disclaimer modal on DOMContentLoaded
- After accepting, remove gate CSS and reveal welcome page
- User must accept disclaimer before they can access the application
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Reverts the utility bar feature and disclaimer timing changes that
caused the disclaimer to flash on screen for users who had already
accepted it.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Show disclaimer BEFORE welcome page on first visit (was showing after)
- Add shared utility-bar.html partial with theme, animations, settings, help
- Include utility bar on Aircraft, Satellite, and Vessels dashboards
- Support ?settings=open and ?help=open URL params from dashboards
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The CSS filter (invert + hue-rotate) was previously used to make light
OSM tiles appear dark. Now that we use actual dark CARTO tiles, this
filter was inverting them back to light. Removed from all dashboards.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Settings.registerMap() to register maps for tile updates
- Add Settings.createTileLayer() to create tile layers from settings
- Update _updateMapTiles() to use registered maps
- Expose all maps to window object for settings manager access
- All dashboards now use Settings manager when available
- Tile provider changes in settings now apply immediately to all maps
- Use Fastly CDN for CARTO tiles (more reliable)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The {r} retina parameter was causing CARTO to return light/gray tiles
instead of dark tiles. Removed {r} from all tile layer URLs.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix traceroute button in Meshtastic popups using event delegation
instead of inline onclick handlers (more reliable with Leaflet)
- Update all maps to use dark CARTO tiles for consistency:
- ADS-B dashboard radar map
- AIS dashboard vessel map
- Satellite dashboard ground map
- APRS map
- Satellite ground track map in main UI
- Change settings manager default tile provider to cartodb_dark
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Makes it much clearer which vehicle is being tracked on the map by adding
two animated concentric rings that pulse outward from the selected marker.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Increased viewport height offset from 95px to 115px to account for the
actual combined height of header and stats strip elements.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The audio visualizer was returning early if audioSpectrumCanvas didn't
exist, preventing the signal level from being fed to the synthesizer.
Now it continues to update currentSignalLevel even without the canvas.
Also added detailed logging to diagnose audio context issues.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
