Redesign the sidebar to be more minimal with collapsible sections
for Settings and Advanced options. Primary sweep action is now
prominently displayed, with tool buttons condensed to compact icons.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Relocate header utilities (UTC clock, theme toggle, dependencies
button, help button) to the navigation bar. Elements are grouped
logically with the clock on its own and tool buttons together,
all aligned to the far right of the nav bar.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Move SDR configuration controls from sidebar to a horizontal function bar
above the map display for better visibility and accessibility. The bar
includes frequency/station/packet stats, region and gain controls, tool
status indicators, and start/stop buttons.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add spectrum monitoring via rtl_power with configurable presets
- Add OpenCelliD tower integration with Leaflet map display
- Add grgsm_scanner integration for passive GSM cell detection (alpha)
- Add rules engine for anomaly detection and findings
- Add baseline recording and comparison system
- Add setup.sh support for gr-gsm installation on Debian/Ubuntu
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Backend changes (routes/aprs.py):
- Remove -q h flag from direwolf to enable audio level output
- Add parse_audio_level() to extract levels from direwolf output
- Add rate-limiting (max 10 updates/sec, min 2-level change)
- Push meter events to SSE queue as type='meter'
Frontend changes:
- Add signal meter widget to APRS sidebar
- Horizontal bar gauge with gradient (green->cyan->yellow->red)
- Numeric level display (0-100)
- "BURST" indicator for levels >70
- Status text (weak/moderate/strong signal)
- "No RF activity" state after 5 seconds of silence
- CSS styles in static/css/modes/aprs.css
Also added UK region to dropdown (same freq as Europe: 144.800)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add "Radar" toggle in display controls to overlay radar effect on map
- Radar overlay shows sweep line, range rings, compass rose, center point
- Fix squawk button using addEventListener instead of inline onclick
- Add missing airbandStatus element to fix null error
- Improve squawk modal with click-outside-to-close
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix status dot to be red when inactive, green when tracking
- Add additional map invalidateSize call to fix missing tiles on load
- Add type="button" and z-index to strip buttons for proper click handling
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add slim statistics bar with live stats (aircraft count, max range,
highest altitude, fastest speed, closest aircraft, countries, ACARS)
- Add session timer and report generation with JSON export
- Add signal quality indicator with visual dots
- Add squawk code reference modal
- Add flight lookup button (FlightAware integration)
- Add aircraft type icons (jet, helicopter, prop, military, glider)
- Move status indicator and UTC time from header to stats strip
- Reorganize controls bar into logical groups
- Add ICAO country allocation data for nationality detection
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add ADS-B device selector with label before START button
- Add Listen label for airband device selector
- Track which device is actively used for ADS-B tracking
- Disable ADS-B device selector while tracking is active
- Update device conflict detection to use actual selected device
- Consolidate device selector initialization into single function
- Remove duplicate device loading from initAirband()
- Add APRS to mobile navigation bar (was missing)
- Fix CSS that was forcing aircraft visuals to always display
- Only apply flex layout to visuals when they are actually visible
- Fix ADS-B dashboard mobile layout with proper flex ordering
- Reset grid properties on mobile for proper stacking
- Hide ACARS sidebar on mobile (desktop only feature)
- Add mobile CSS for dashboard to allow scrolling and proper stacking
- Set explicit height for map container on mobile (50vh min 300px)
- Remove sidebar max-height restriction on mobile
- Add map invalidateSize() on init, resize, and orientation change
- Fix controls bar wrapping and touch-friendly zoom controls
- Simplify header layout on mobile
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add comprehensive mobile CSS for viewport scrolling and layout stacking
- Fix Leaflet maps not rendering by adding explicit heights and invalidateSize() calls
- Add touch-friendly controls and proper touch-action for maps
- Simplify header on mobile, hide stats and reduce sizes
- Handle orientation changes and window resize for maps
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Extract inline CSS to static/css/modes/ (acars, aprs, tscm)
- Create HTML partials for all 9 modes in templates/partials/modes/
- Reduce index.html from 11,862 to 10,281 lines (~15% reduction)
- Use Jinja2 includes for cleaner template organization
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add responsive.css with shared utilities (hamburger menu, touch targets, responsive typography)
- Add hamburger menu and mobile drawer navigation to main app
- Add horizontal scrolling mobile nav bar for mode switching
- Refactor index.css with mobile-first breakpoints
- Update adsb_dashboard.css for mobile layouts
- Update satellite_dashboard.css for mobile layouts
- Add mobile nav controller to app.js with drawer toggle
- Hide stats/taglines on small screens
- Unified breakpoints: 480px (phone), 768px (tablet), 1024px (desktop)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Replace simple splash screen with comprehensive welcome page
- Show version number and latest changelog entries
- Add 9-button mode selection grid for direct navigation
- User can now choose which mode to start with
- Responsive layout adapts to mobile screens
- Flow: Welcome → Disclaimer (if needed) → Selected mode
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Convert flat mode nav buttons into dropdown menus by category (SDR/RF, Wireless, Security)
- Add CSS styles for dropdown animations and active state highlighting
- Fix baseline recording by feeding device data to recorder endpoints
- Remove redundant threat summary section from TSCM sidebar
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Restore APRS dynamic device selection and status bar
- Add ACARS status indicator with listening/receiving states
- Fix acars.py: use -o 4 for JSON, correct command order, add macOS pty fix
- Unify all start buttons (green) and stop buttons (red) across app
- Update help documentation with all modes (APRS, ACARS, Listening Post, TSCM)
- Add TSCM Alpha badge to sidebar
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Reorder HTML: ACARS sidebar now comes before main-display
- Update grid: auto 1fr 300px (ACARS, Map, Sidebar)
- Swap borders: right border on sidebar, left border on button
- Button now on right side of ACARS panel (bordering map)
- Icon changed to left arrow (collapse direction)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The parent container has overflow:auto which clipped the absolutely
positioned button. Changed to simple flexbox approach where:
- Button is a normal flex child (always visible)
- Content div collapses to width:0 when collapsed
- Map expands to fill available space via flex
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix checkAcarsTools error by removing orphaned function call
- Change toggle icon from left arrow to right arrow (indicates collapse direction)
- Fix button positioning to use left edge instead of right edge
- Button now correctly appears on left side of ACARS panel (bordering map)
- Both index.html and adsb_dashboard now behave consistently
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Change collapsed width from 32px to 0 so map expands fully
- Position collapse button as absolute overlay on map edge
- Button slides to edge of map when collapsed (right: 100%)
- Content fades out smoothly instead of abrupt hide
- Applied same fix to both adsb_dashboard.css and index.html
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add routes/acars.py with start/stop/stream endpoints for ACARS decoding
- Build acarsdec from source in Dockerfile (not available in Debian slim)
- Add acarsdec installation script to setup.sh for native installs
- Add ACARS to dependency checker in utils/dependencies.py
- Add collapsible ACARS sidebar next to map in aircraft tracking tab
- Add collapsible ACARS panel in ADS-B dashboard with same layout
- Include guidance about needing two SDRs for simultaneous ADS-B + ACARS
- Support regional frequency presets (N.America, Europe, Asia-Pacific)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Rebrand from INTERCEPT to iNTERCEPT
- New logo design with 'i' and signal wave brackets
- Add animated landing page with "See the Invisible" tagline
- Fix tuning dial audio issues with debouncing and restart prevention
- Fix Listening Post scanner with proper signal hit logging
- Update setup script for apt-based Python package installation
- Add Instagram promo video template
- Add full-size logo assets for external use
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add/remove callsigns, registrations, or ICAO codes to watch
- Alert notification and sound when watched aircraft detected
- Filter view to show only watched aircraft
- Visual highlighting with cyan border and star icon
- Watchlist persisted to localStorage
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Update browser titles and headers across all pages with the new
tagline. Add 'Signal Intelligence Platform' as subtitle.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The LoRa mode was removed because:
- rtl_433 cannot decode actual LoRa (CSS modulation)
- The 433MHz mode already handles ISM band devices
- True LoRa decoding requires specialized tools like gr-lora
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add new LoRa backend route (routes/lora.py) with:
- Frequency band definitions (EU868, US915, AU915, AS923, IN865, ISM433)
- Start/stop/stream/status endpoints using rtl_433
- Device pattern matching for LoRa/LPWAN devices
- Signal quality calculation from RSSI
- Add LoRa frontend UI with:
- Navigation button in SDR/RF group
- Band selector with channel presets
- Visualization layout (radar, device types, signal quality, activity log)
- Device card list with selection details
- Header stats for devices and signals
- Fix Bias-T toggle visibility for Listening Post and LoRa modes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
HTML:
- Create bt-layout-container with flex layout
- Left side: visualizations (radar, selected device, device types,
tracker detection, signal distribution, FindMy detection)
- Right side: scrollable device card list
CSS:
- Add bt-layout-container styles matching wifi-layout-container
- Add bt-device-card styles with purple accent
- Add device type overview styles
- Add signal distribution bar styles
- Add responsive breakpoints
JavaScript:
- Update addBtDeviceCard to create cards in new device list
- Add selectBtDevice for device selection
- Add updateBtStatsPanels for device type and signal stats
- Add updateBtFindMyList for FindMy device tracking
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add .wifi-client-card styles matching network card layout
- Purple border and subtle background for visual distinction
- Consistent font sizing with network cards
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add rogueBssids Set to track all BSSIDs flagged as rogues
- Display red banner with pulsing animation on rogue network cards
- Apply red border and background tint to rogue AP cards
- Show prominent warning in selected device panel for rogue APs
- Change SSID color to red when viewing rogue AP details
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Layout changes:
- Move device list to right column beside visualizations
- Add dedicated WiFi device list panel with header and count
- Hide waterfall and generic output for WiFi mode
- Add responsive styles for smaller screens
Capture fixes:
- Fix handshake capture: add interface param, stop existing scan first
- Fix PMKID capture: add interface param, stop existing scan first
- Add proper error handling with try/catch for both capture functions
- Use monitorInterface variable when available
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add min-height: 0 to output-panel to fix grid overflow scrolling
- Add min-height: 200px to output-content for device cards visibility
- Add max-height: 50vh to wifi-visuals to leave room for device list
- Make wifi-visuals scrollable when content exceeds max-height
- Remove Target Signal panel (redundant with Selected Device panel)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Changed output-panel overflow from hidden to auto
- Allows scrolling to see all content including bottom panels
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- WiFi interfaces now show driver, chipset, and MAC address for easier identification
- Remove signal history feature from WiFi and Bluetooth sections (HTML, JS, CSS, API)
- Fix Listen button in Listening Post signal hits to properly tune to frequency
- Make stopAudio() async and improve tuneToFrequency() with proper awaits
- Fix Device Intelligence panel auto-expand and manufacturer display
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Increased max-height from 280px to 480px
- Added styling for photo container with cyan border
- Photo limited to 140px height with cover fit
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Remove direct serial GPS dongle support in favor of gpsd daemon connectivity.
The UI now auto-connects to gpsd on page load and shows a GPS indicator when connected.
Simplify ADS-B dashboard controls bar for a cleaner, more compact layout.
Add setup-dev.sh for streamlined development environment setup.
- Remove GPSReader class and NMEA parsing (utils/gps.py)
- Consolidate to GPSDClient only with auto-connect endpoint
- Add GPS indicator with pulsing dot animation
- Compact controls bar with smaller fonts and tighter spacing
- Add aircraft database download banner/functionality
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Listening Post mode with frequency scanner and audio monitoring
- Add dependency warning for aircraft dashboard listen feature
- Auto-restart audio when switching frequencies
- Fix toolbar overflow on aircraft dashboard custom frequency
- Update setup script with full macOS/Debian support
- Clean up README and documentation for clarity
- Add sox and dump1090 to Dockerfile
- Add comprehensive tool reference to HARDWARE.md
- Add correlation, settings, and database utilities
- Add new test files for routes, validation, correlation, database
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Jon Ander Oribe