The APRS map initialisation only checked for a live GPS fix, falling
back to the centre of the US (39.8N, 98.6W) when none was available.
It never read the observer position configured in .env via
INTERCEPT_DEFAULT_LAT / INTERCEPT_DEFAULT_LON.
Seed aprsUserLocation from ObserverLocation.getShared() (or the
Jinja-injected defaults) on page load so the map centres on the
user's configured position and distance calculations work without GPS.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix SSE fanout thread AttributeError when source queue is None during
interpreter shutdown by snapshotting to local variable with null guard
- Fix branded "i" logo rendering oversized on first page load (FOUC) by
adding inline width/height to SVG elements across 10 templates
- Bump version to 2.26.0 in config.py, pyproject.toml, and CHANGELOG.md
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The CSS ::after dot positioning was unreliable across fonts and sizes.
Switch to an inline SVG of the "i" glyph (green dot + cyan stem/bars)
extracted from the logo — renders pixel-perfect at any size.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The dotless i (ı) wasn't rendering in all fonts. Switch to a regular "i"
with the green dot CSS overlay positioned on top of the native dot.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Matches the logo icon — the "i" in iNTERCEPT now renders with a cyan
letter and green dot via CSS, consistent across the main header, welcome
card, dashboard headers, help modal, settings modal, and all popout pages.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
ensureModeScript() used document.body.appendChild() to load lazy mode
scripts, but the preload for ?mode= query params runs in <head> before
<body> exists, causing all deep-linked modes to silently fail.
Also fix cross-mode handoffs (BT→BT Locate, WiFi→WiFi Locate,
Spy Stations→Waterfall) that assumed target module was already loaded.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add WiFi Locate mode for locating access points by BSSID with real-time
signal meter, distance estimation, RSSI history chart, and audio
proximity tones. Includes hand-off from WiFi detail drawer, environment
presets (Free Space/Outdoor/Indoor), and signal-lost detection.
Also includes:
- Mobile navigation reorganized into labeled groups (SIG/TRK/SPC/WIFI/INTEL/SYS)
- flask-limiter made optional with graceful degradation
- Fix radiosonde setup missing semver Python dependency
- Documentation updates (FEATURES, USAGE, UI_GUIDE, GitHub Pages site)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Addresses final upstream review — all backend-derived values (timestamp,
bit_count, rssi, hex, ascii) now use DOM methods instead of innerHTML
interpolation, closing the last XSS surface. Bumps cache-buster to ook2.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Critical:
- Pass sdr_type_str to claim/release_sdr_device (was missing 3rd arg)
- Add ook_active_sdr_type module-level var for proper device registry tracking
- Add server-side range validation on all timing params via validate_positive_int
Major:
- Extract cleanup_ook() function for full teardown (stop_event, pipes, process,
SDR release) — called from both stop_ook() and kill_all()
- Replace Popen monkey-patching with module-level _ook_stop_event/_ook_parser_thread
- Fix XSS: define local _esc() fallback in ook.js, never use raw innerHTML
- Remove dead inversion code path in utils/ook.py (bytes.fromhex on same
string that already failed decode — could never produce a result)
Minor:
- Status event key 'status' → 'text' for consistency with other modules
- Parser thread logging: debug → warning for missing code field and errors
- Parser thread emits status:stopped on exit (normal EOF or crash)
- Add cache-busting ?v={{ version }}&r=ook1 to ook.js script include
- Fix gain/ppm comparison: != '0' (string) → != 0 (number)
Tests: 22 → 33 (added start success, stop with process, SSE stream,
timing range validation, stopped-on-exit event)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add kill_all() handler for OOK process cleanup on global reset
- Fix stop_ook() to close pipes and join parser thread (prevents hangs)
- Add ook.css with CSS classes, replace inline styles in ook.html
- Register ook.css in lazy-load style map (INTERCEPT_MODE_STYLE_MAP)
- Fix frontend frequency min=24 to match backend validation
- Add 22 unit tests for decode_ook_frame, ook_parser_thread, and routes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix XSS: escape ASCII output in innerHTML via escapeHtml()
- Fix deadlock: use put_nowait() for queue ops under ook_lock
- Fix SSE leak: add ook to moduleDestroyMap so switching modes
closes the EventSource
- Fix RSSI: explicit null check preserves valid zero values in
JSON export
- Add frame cap: trim oldest frames at 5000 to prevent unbounded
memory growth on busy bands
- Validate timing params: wrap int() casts in try/except, return
400 instead of 500 on invalid input
- Fix PWM hint: correct to short=0/long=1 matching rtl_433
OOK_PWM convention (UI, JS hints, and cheat sheet)
- Fix inversion docstring: clarify fallback only applies when
primary hex parse fails, not for valid decoded frames
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix double-scroll by switching ookOutputPanel to flex layout
- Keep decoded frames visible after stopping (persist for review)
- Wire global Clear/CSV/JSON status bar buttons to OOK functions
- Hide default output pane in OOK mode (uses own panel)
- Add command display showing the active rtl_433 command
- Add JSON export and auto-scroll support
- Fix 0x prefix stripping in OOK hex decoder
- Fix PWM encoding hint text
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Timing presets: five quick-fill buttons (300/600, 300/900, 400/800, 500/1500, 500 MC)
that populate all six pulse-timing fields at once — maps to CTF flag timing profiles
- RSSI per frame: add -M level to rtl_433 command; parse snr/rssi/level from JSON;
display dB SNR inline with each frame; include rssi_db column in CSV export
- Auto bit-order suggest: "Suggest" button counts printable chars across all stored
frames for MSB vs LSB, selects the winner, shows count — no decoder restart needed
- Pattern filter: live hex/ASCII filter input above the frame log; hides non-matching
frames and highlights matches in green; respects current bit order
- TSCM integration: "Decode (OOK)" button in RF signal device details panel switches
to OOK mode and pre-fills frequency — frontend-only, no backend changes needed
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
SSE EventSources and running processes were not cleaned up during
dashboard navigation, saturating the browser's per-origin connection
limit. Extract moduleDestroyMap into shared getModuleDestroyFn() and
call destroyCurrentMode() before navigation. Also expand
stopActiveLocalScansForNavigation() to cover wefax, weathersat, sstv,
subghz, meshtastic, and gps modes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Several modes didn't pass sdr_type to claim_sdr_device(), defaulting to
'rtlsdr' and triggering an rtl_test USB probe that fails for HackRF with
a confusing "check that the RTL-SDR is connected" message.
- Add sdr_type to frontend start requests for rtlamr, weather-sat, sstv-general
- Read sdr_type in backend routes and pass to claim/release_sdr_device()
- Add early guard returning clear "not yet supported" error for non-RTL-SDR
hardware in modes that are hardcoded to RTL-SDR tools
- Make probe_rtlsdr_device error message device-type-agnostic
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The "Mute" button on pager cards persists muted addresses to
localStorage with no visible indicator, making it easy to
accidentally hide an address and forget about it. This caused
flag fragment messages on RIC 1337 to silently disappear.
- Add "X muted source(s) — Unmute All" indicator to sidebar
- Stop persisting hideToneOnly filter across sessions so the
default (show all) always applies on page load
- Remove default checked state from Tone Only filter checkbox
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Three issues caused POCSAG messages to be incorrectly hidden or
misclassified in the Device Intelligence panel:
1. detectEncryption used a narrow character class ([a-zA-Z0-9\s.,!?-])
to measure "printable ratio". Messages containing common printable
ASCII characters like : = / + @ fell below the 0.8 threshold and
returned null ("Unknown") instead of false ("Plaintext"). Simplified
to check all printable ASCII (\x20-\x7E) which correctly classifies
base64, structured data, and punctuation-heavy content.
2. The default hideToneOnly filter was true, hiding all address-only
(Tone) pager messages. When RF conditions cause multimon-ng to decode
the address but not the message content, the resulting Tone card was
silently filtered. Changed default to false so users see all traffic
and can opt-in to filtering.
3. The multimon-ng output parser only recognized "Alpha" and "Numeric"
content type labels. Added a catch-all pattern to capture any
additional content type labels that future multimon-ng versions or
forks might emit, rather than dropping them to raw output.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Use postMessage from parent page to notify the satellite dashboard
iframe of visibility changes, preventing unnecessary POST requests
to /satellite/position when the user isn't viewing satellite mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Full-stack meteor scatter monitoring mode that captures IQ data from
an RTL-SDR, computes FFT waterfall frames via WebSocket, and runs a
real-time detection engine to identify transient VHF reflections from
meteor ionization trails (e.g. GRAVES radar at 143.050 MHz).
Backend: MeteorDetector with EMA noise floor, SNR threshold state
machine (IDLE/DETECTING/ACTIVE/COOLDOWN), hysteresis, and CSV/JSON
export. WebSocket at /ws/meteor for binary waterfall frames, SSE at
/meteor/stream for detection events and stats.
Frontend: spectrum + waterfall + timeline canvases, event table with
SNR/duration/confidence, stats strip, turbo colour LUT. Uses shared
SDR device selection panel with conflict tracking.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move tracking state, balloon count, last update, and waveform from the
sidebar into a stats strip above the map, matching the APRS strip pattern.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Reusable SVG bar waveform (SignalWaveform.Live) that animates in response
to incoming SSE data — idle breathing when stopped, active oscillation
proportional to telemetry update frequency, smooth decay on signal loss.
Integrated into radiosonde Status section with ping() on each balloon
message and stop() on tracking stop. Also hardens the fetch error path
to show a readable message instead of a JSON parse error when the server
returns HTML.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
SSE EventSource connections for AIS, ACARS, VDL2, and radiosonde were
not closed when switching modes, causing fd exhaustion after repeated
switches. Also fixes socket leaks on exception paths in AIS/ADS-B
stream parsers, closes subprocess pipes in safe_terminate/cleanup, and
caches skyfield timescale at module level to avoid per-request fd churn.
Closes#169
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#164. Only pager and sensor routes supported rtl_tcp connections.
Now aprs, morse, and dsc routes follow the same pattern: extract
rtl_tcp_host/port from the request, skip local device claiming for
remote connections, and use SDRFactory.create_network_device(). DSC also
refactored from manual rtl_fm command building to use SDRFactory's
builder abstraction. Frontend wired up for all three modes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Change 'already_running' to 'already_scanning' status in bluetooth_v2
so frontend recognizes the response and connects the SSE stream
- Hide pagerScopePanel and sensorScopePanel in switchMode() to prevent
audio waveform bars leaking into other modes
- Clear devices Map, pendingDeviceIds Set, and UI in BluetoothMode.destroy()
to prevent memory accumulation on repeated mode switches
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Mode modules were leaking EventSource connections, setInterval timers,
and setTimeout timers on every mode switch, causing progressive browser
sluggishness. Added destroy() to 8 modules missing it (meshtastic,
bluetooth, wifi, bt_locate, sstv, sstv-general, websdr, spy-stations)
and centralized all destroy calls in switchMode() via a moduleDestroyMap
that cleanly tears down only the previous mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Integrate radiosonde_auto_rx for automatic weather balloon detection and
decoding on 400-406 MHz. Includes UDP telemetry parsing, Leaflet map with
altitude-colored markers and trajectory tracks, SDR device registry
integration, setup script installation, and Docker support.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The registry used plain int keys (device index), so HackRF at index 0
and RTL-SDR at index 0 would collide. Changed to composite string keys
("sdr_type:index") so each SDR type+index pair is tracked independently.
Updated all route callers, frontend device selectors, and session restore.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace broken app.gps_state lookup with utils.gps.get_current_position()
and return GPS metadata (fix quality, satellites, accuracy). Shrink location
card to single-column with 200px globe, move System Info into row 2.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add SVG arc gauge, per-core CPU bars, temperature sparkline, network
interface monitoring with bandwidth deltas, disk I/O rates, 3D globe
with observer location, weather overlay, battery/fan/throttle support,
and process grid layout. New /system/location and /system/weather endpoints.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Real-time dashboard for host metrics (CPU, memory, disk, temperatures),
active decoder process status, and SDR device enumeration via SSE streaming.
Auto-connects when entering the mode with graceful psutil fallback.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The .btn, .btn-sm, and .btn-ghost classes used by morse mode buttons
(TXT, CSV, Copy, Clear) were defined in core/components.css but the
stylesheet was never loaded in index.html, causing unstyled buttons.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
rtl_fm prints device info, tuning, and errors to stderr but the morse
route only logged these server-side. Now stderr lines are forwarded to
the morse queue as info events, displayed in a compact diagnostic log
below the scope canvas. After 10s with no audio data, the scope text
escalates to prompt the user to check the SDR log.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace blocking rtl_stdout.read() with select()+os.read() so the
decoder thread emits diagnostic heartbeat scope events when rtl_fm
produces no PCM data (common in direct sampling mode). Add waiting-state
rendering in the scope canvas and hide the generic placeholder/status
bar for morse mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#155 — users can now access settings directly from the welcome
screen without entering a mode first.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix "What's New" section shifting up/down on smaller screens (#157) by
isolating the logo pulse animation to its own compositing layer, stabilizing
the scrollbar gutter, and pinning the welcome container dimensions.
Morse mode improvements: relocate scope and decoded output panels to the
main content area, use shared SDR device controls, and reduce panel heights
for better layout.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New signal mode for decoding Morse code (CW) transmissions via SDR.
Includes route blueprint, utility decoder, frontend UI, and tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Make stopAprs() async and await backend stop completion before
re-enabling the Start button, preventing race where a late stop
request kills newly started processes
- Add cache-buster param to EventSource URL to prevent browser
SSE connection reuse between stop/start cycles
- Capture aprs_active_device locally in stream_aprs_output so the
old thread's finally block doesn't release a device claimed by
a new session
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Number(null) evaluates to 0 which passes Number.isFinite(),
causing aprsHasValidCoordinates(null, null) to return true.
This made initAprsMap() center the map at [0,0] (Gulf of Guinea)
at zoom 8 instead of the US default, hiding all station markers
off-screen.
Add null guards (lat != null && lon != null) to reject null/undefined
while still accepting 0 as a valid equator coordinate.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
