Closes#164. Only pager and sensor routes supported rtl_tcp connections.
Now aprs, morse, and dsc routes follow the same pattern: extract
rtl_tcp_host/port from the request, skip local device claiming for
remote connections, and use SDRFactory.create_network_device(). DSC also
refactored from manual rtl_fm command building to use SDRFactory's
builder abstraction. Frontend wired up for all three modes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Blueprint registration and database init run synchronously (essential
for routing). Process cleanup, database cleanup scheduling, and TLE
satellite updates are deferred to a background thread with a 1-second
delay so the gevent worker can start serving HTTP requests right away.
Previously all init ran synchronously during module import, blocking
the single gevent worker for minutes while TLE data was fetched from
CelesTrak.
Also removes duplicate TLE update — init_tle_auto_refresh() already
schedules its own background fetch.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
All other docs already reference sudo ./start.sh but the inline usage
comments in start.sh itself and the --help example in USAGE.md were
missing it, which could lead users to run without root privileges.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The custom SIGINT/SIGTERM handler in utils/process.py overrode
gunicorn's own signal management, causing KeyboardInterrupt to fire
inside the gevent worker on Ctrl+C instead of allowing gunicorn's
graceful shutdown. Now detects if another signal manager (gunicorn)
has already installed handlers and defers to it.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Blueprint registration, database init, cleanup, and websocket setup
were all inside main() which only runs via 'python intercept.py'.
When gunicorn imports app:app, it got a bare Flask app with no routes,
causing every endpoint to return 404.
Extracted initialization into _init_app() called at module level with
a guard to prevent double-init when main() is also used.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Rate limiting on login is a security requirement, not optional.
Reverts the no-op fallback — if flask-limiter is missing, the app
will fail fast with a clear import error rather than silently
running without rate limiting.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- psutil was in requirements.txt but missing from setup.sh optional list
- Verification check no longer hard-fails on flask-limiter since app.py
now handles it as optional with a no-op fallback
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
flask-limiter may not be installed (e.g. RPi venv). The hard import
crashed the gunicorn gevent worker on startup, causing all routes to
return 404 with no visible error. Now falls back to a no-op limiter.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Long-lived SSE connections prevent the gevent worker from exiting on
SIGINT. --graceful-timeout 5 force-kills the worker after 5 seconds.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Gunicorn's gevent worker (-k gevent) handles monkey-patching internally.
The manual patch_all() in app.py ran in the master process before worker
fork, preventing the worker from booting (no 'Booting worker' log line,
server unreachable).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Resolves ModuleNotFoundError when running outside a venv by auto-detecting
the venv/bin/python relative to the script, falling back to VIRTUAL_ENV
or system python3.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add start.sh as the recommended production entry point with:
- gunicorn + gevent worker for concurrent SSE/WebSocket handling
- CLI flags for port, host, debug, HTTPS, and dependency checks
- Auto-fallback to Flask dev server if gunicorn not installed
- Conditional gevent monkey-patch in app.py via INTERCEPT_USE_GEVENT env var
- Docker CMD updated to use start.sh
- Updated all docs, setup.sh, and requirements.txt accordingly
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Change 'already_running' to 'already_scanning' status in bluetooth_v2
so frontend recognizes the response and connects the SSE stream
- Hide pagerScopePanel and sensorScopePanel in switchMode() to prevent
audio waveform bars leaking into other modes
- Clear devices Map, pendingDeviceIds Set, and UI in BluetoothMode.destroy()
to prevent memory accumulation on repeated mode switches
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Previously all HackRF devices were hardcoded as "HackRF One" regardless
of actual hardware variant. Now parses the Board ID line from hackrf_info
to correctly identify HackRF Pro, HackRF One, and other variants.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Pass observer location and gpsd status to radiosonde_auto_rx station config
- Add station marker on radiosonde map with GPS live position updates
- Display distance from station to each balloon in cards and popups
- Update aircraft database
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Resolved conflicts:
- routes/acars.py: keep /messages and /clear endpoints for history reload
- routes/vdl2.py: keep /messages and /clear endpoints for history reload
- templates/adsb_dashboard.html: keep removal of hardcoded device-1
defaults for ACARS/VDL2 selectors (users pick their own device)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Mode modules were leaking EventSource connections, setInterval timers,
and setTimeout timers on every mode switch, causing progressive browser
sluggishness. Added destroy() to 8 modules missing it (meshtastic,
bluetooth, wifi, bt_locate, sstv, sstv-general, websdr, spy-stations)
and centralized all destroy calls in switchMode() via a moduleDestroyMap
that cleanly tears down only the previous mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Re-implements envelope detection on top of the rewritten Morse decoder.
Addresses PR #160 review feedback:
- Rebase: rebuilt on current upstream/main (lifecycle state machine)
- Gap thresholds: 2.0/5.0 for envelope only; goertzel keeps 2.6/6.0
- Frequency validation: max_mhz=1766 for envelope, 30 for goertzel
- Tests: EnvelopeDetector unit tests + envelope-mode decoder test
- Envelope uses direct magnitude threshold (no SNR/noise ref)
- Goertzel path completely unchanged
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
rtl_test opens the USB device during probing. After killing the
process, the kernel may not release the USB interface immediately.
dump1090 then fails with usb_claim_interface error -6. Add a 0.5s
delay after probe cleanup to allow the kernel to fully release the
device before the actual decoder opens it.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
rtl_test -t often exits non-zero after finding a device (e.g.
"No E4000 tuner found, aborting" with R820T tuners). The return
code fallback was firing even when the "Found N device(s)" success
message had already been matched. Track device_found separately
and only use return code as fallback when no success was seen.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The success check ('Found' in line and 'device' in line) matched
"No supported devices found" since both keywords appear. Add a
pre-check for negative device messages, a return code fallback,
and a clearer error message.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The stop button appeared unresponsive because UI updates waited for the
server response. If the fetch hung or errored, the user saw nothing.
Now the UI updates immediately (matching the pager stop pattern) and
the server request happens in the background.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Auto_rx reads many config keys without defaults and crashes if they're
missing, even for disabled features like email. Include every section
and key from the example config to prevent missing-key errors.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The config format changed significantly: SDR settings moved to [sdr_1],
[positioning] became [location], and many sections are now required.
Also enable payload_summary UDP output so telemetry reaches our listener.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Pass config file path (not directory) to auto_rx -c flag
- Use absolute paths in generated station.cfg since auto_rx runs
with cwd set to its install directory
- Teach dependency checker about auto_rx.py at /opt install path
so the "missing dependency" banner no longer appears
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The setup.sh skip check only looked for auto_rx.py, so a previous
incomplete install (Python files but no compiled binaries) would be
treated as fully installed. Now also checks for dft_detect binary.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
setup.sh and Dockerfile were installing the Python package and copying
files but skipping the build.sh step that compiles the C decoders.
This caused "Binary dft_detect does not exist" at runtime.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The subprocess was launched with bare 'python' which on Debian doesn't
exist (python3 only) and wouldn't have access to the venv-installed
radiosonde dependencies anyway. Using sys.executable ensures the same
interpreter (with all installed packages) is used.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move adsb_active_device/sdr_type assignment to immediately after
claim_sdr_device so stop_adsb() can always release the device, even
during startup. Sync sdr_type_str after SDRType fallback to prevent
claim/release key mismatch. Clear active device on all error paths.
Replace blind 3s sleep for dump1090 readiness with port-polling loop
(100ms intervals, 3s max). Replace subprocess.run() in rtl_test probe
with Popen + select-based early termination on success/error detection.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Avoids PEP 668 externally-managed-environment error on Debian Bookworm
by using the project's venv/bin/pip instead of system pip3.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Integrate radiosonde_auto_rx for automatic weather balloon detection and
decoding on 400-406 MHz. Includes UDP telemetry parsing, Leaflet map with
altitude-colored markers and trajectory tracks, SDR device registry
integration, setup script installation, and Docker support.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The registry used plain int keys (device index), so HackRF at index 0
and RTL-SDR at index 0 would collide. Changed to composite string keys
("sdr_type:index") so each SDR type+index pair is tracked independently.
Updated all route callers, frontend device selectors, and session restore.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Switch direwolf subprocess output from PIPE to PTY (pseudo-terminal),
forcing line-buffered output so packets arrive immediately instead of
waiting for a 4-8KB pipe buffer to fill. Matches the proven pattern
used by pager mode.
Also enhances direwolf config with FIX_BITS error correction and
disables unused AGWPE/KISS server ports.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The globe wasn't rendering because initGlobe() used setTimeout(100)
which can race with the display:none removal by switchMode(). Both
GPS and WebSDR modes use requestAnimationFrame to wait for the browser
to compute layout before initializing Globe.gl.
- Replace setTimeout with RAF-based retry loop (up to 8 frames)
- Add try-catch around Globe() init with fallback message
- Match the proven pattern from GPS and WebSDR modes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix globe destroyed on re-render by preserving canvas DOM node across
renderLocationCard() calls instead of recreating from scratch
- Reduce globe.gl camera minDistance (180->120) so globe is visible in
200px container
- Clear stale globeInstance ref when canvas is gone
- Enlarge CPU gauge (90->110px), percentage label (18->22px), core bars
(24->48px height), and detail text (11->12px)
- JS fetchLocation() now supplements server response with client-side
ObserverLocation.getShared() from localStorage when server returns
'default' or 'none', picking up manual coordinates from settings modal
- Location priority: GPS > config env vars > manual (localStorage) > default
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add third location fallback to utils/constants (London 51.5074/-0.1278)
so location always resolves even without GPS or env vars configured
- Remove min-height from sys-card to eliminate wasted space
- Switch System Info to vertical key-value layout filling the card
- Clean up OS string (strip glibc suffix), use locale date for boot time
- Bump info grid font size from 11px to 12px for readability
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace broken app.gps_state lookup with utils.gps.get_current_position()
and return GPS metadata (fix quality, satellites, accuracy). Shrink location
card to single-column with 200px globe, move System Info into row 2.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add SVG arc gauge, per-core CPU bars, temperature sparkline, network
interface monitoring with bandwidth deltas, disk I/O rates, 3D globe
with observer location, weather overlay, battery/fan/throttle support,
and process grid layout. New /system/location and /system/weather endpoints.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Clear sidebar highlights and ACARS message timer when stale selected
aircraft is removed in cleanupOldAircraft()
- Escape all user-controlled strings in renderAcarsCard(),
addAcarsMessage(), and renderAcarsMainCard() before innerHTML insertion
- Remove dead duplicate H1 check in classify_message_type
- Move _d label from link_test set to handshake return path
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Real-time dashboard for host metrics (CPU, memory, disk, temperatures),
active decoder process status, and SDR device enumeration via SSE streaming.
Auto-connects when entering the mode with graceful psutil fallback.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Switch decoder subprocess from text mode to binary mode and decode
each line with errors='replace' so corrupted radio bytes (e.g. 0xf7)
are substituted instead of raising UnicodeDecodeError after long runs.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The satellite dropdown had no change listener, so selecting a different
satellite never updated the pass list, timeline, countdown, or polar plot.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
