- Change direwolf flags from -D 1 to correct flags for stdin input
- Add -n 1 (mono), -b 16 (16-bit), -t 0 (no PTT), -q d (quiet)
- Add -M fm for explicit FM demodulation in rtl_fm
- Add explicit stdout output (-) to rtl_fm command
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add updateAirbandSquelch() to restart audio when squelch slider changes
- Remove verbose diagnostic logging from audio streaming
- Remove tee diagnostic for raw rtl_fm output
- Keep error logging for troubleshooting
- Simplify audio stream generator
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add /settings/rtlsdr/driver-status endpoint to check for loaded DVB modules
- Add /settings/rtlsdr/blacklist-drivers endpoint to unload modules and create blacklist
- Show warning banner on dashboard when DVB conflict detected
- Provide "Fix Now" button to automatically resolve the issue
- Warn users that their RTL-SDR devices may not work until drivers are blacklisted
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add '-' flag to explicitly specify stdout output
- Some rtl_fm versions/devices require this explicitly
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use tee to capture rtl_fm raw output to /tmp/rtl_fm_raw.bin
- Log raw file size during stream timeouts
- Helps determine if rtl_fm is producing any data at all
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Capture both rtl_fm and ffmpeg stderr to separate log files
- Log ffmpeg errors at stream request and during timeouts
- Helps identify if ffmpeg is the source of zero-byte streaming
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Log when generator starts
- Track iterations and bytes sent
- Log select timeouts to diagnose data flow issues
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Log rtl_fm stderr to /tmp/rtl_fm_stderr.log instead of /dev/null
- Add detailed logging for audio start requests and parameters
- Log audio stream status and bytes transferred
- Help diagnose SDR1 airband audio issues
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use -j instead of -o 4 for JSON output, which is the correct
flag for acarsdec v4.3.1+ (Thibaut Varene fork).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Import device identity functions (get_identity_engine, ingest_ble_dict, etc.)
- Initialize and clear identity engine at sweep start
- Feed BLE observations to identity engine during Bluetooth scan
- Feed WiFi observations to identity engine during WiFi scan
- Finalize sessions and emit identity_clusters event at sweep completion
- Include identity cluster statistics in sweep results
The device identity engine provides MAC-randomization resistant detection
by clustering observations using fingerprinting, timing patterns, and
RSSI trajectory analysis.
- Add startup check in app.py for root/sudo privileges
- Show warning in terminal if not running as root
- Add running_as_root flag to TSCM devices API response
- Display privilege warning in TSCM UI when not running as root
- Show command to run with sudo in the warning
- Add CSS styling for privilege warning banner
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove requirement for sdr_device to be set before RF scanning
- Add RTL-SDR device detection check with rtl_test before scanning
- Lower signal detection threshold from -50dBm to -70dBm
- Lower noise floor threshold from 15dB to 10dB above noise
- Add rf_status event for frontend feedback when RF unavailable
- Show status message in RF panel explaining why scanning isn't working
- Add CSS styling for status messages
- Reset RF status message when sweep starts
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- New device_identity.py: Clusters BLE/WiFi observations into probable
physical devices using passive fingerprinting (not MAC addresses)
- Fingerprinting based on manufacturer data, service UUIDs, capabilities,
timing patterns, and RSSI trajectories
- Session tracking with automatic gap detection
- Risk indicators: stable RSSI, MAC rotation, ESP32 chipsets, audio-capable
- Full audit trail for all clustering decisions
- New ble_scanner.py: Cross-platform BLE scanning with bleak library
- Detects AirTags, Tile, SmartTags, ESP32 by manufacturer ID
- Fallback to system tools (btmgmt, hcitool, system_profiler)
- Added API endpoints for device identity clustering (/tscm/identity/*)
- Updated setup.sh with bleak dependency
- Updated documentation with TSCM features and hardware requirements
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
WiFi Scanning:
- Add 'iw' scan method as primary (sometimes works without root)
- Auto-detect wireless interface from /sys/class/net
- Better error logging for permission issues
- Fall back to iwlist if iw fails
UI Updates:
- Replace Critical/High/Medium/Low cards with new scoring model
- Now shows: High Interest (6+), Needs Review (3-5), Informational (0-2)
- Add Correlations count card
- Update counts based on device classification scores
Tracker Detection:
- Add detection for Apple AirTag (by OUI and name)
- Add detection for Tile trackers
- Add detection for Samsung SmartTag
- Add detection for ESP32/ESP8266 devices (Espressif chipset)
- Add generic chipset vendor detection
- New indicator types with appropriate scoring weights
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The bt_device event was including 'type': device.get('type') which
overwrote the SSE event type 'bt_device' with 'ble', causing the
frontend to not recognize the events.
- Rename device type field from 'type' to 'device_type' in bt_device events
- Update frontend to use device_type for display
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Restore airodump-ng check for WiFi tools
- Add /sys/class/net/*/wireless fallback for WiFi detection
- Add /sys/class/bluetooth/hci* fallback for Bluetooth detection
- Add hciconfig to Bluetooth tool checks
- Add SubprocessError to exception handling
- Multiple fallback layers ensure detection works even with partial tools
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add macOS-specific WiFi detection using airport utility
- Add macOS-specific Bluetooth detection using system_profiler
- Add fallback to 'iw' command on Linux when iwconfig unavailable
- Properly handle platform differences for device availability checks
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Classification levels:
- Green (Informational): Known devices in baseline, expected infrastructure
- Yellow (Needs Review): Unknown BLE devices, new WiFi APs, unidentified RF
- Red (High Interest): Persistent transmitters, audio-capable BLE, trackers,
devices with repeat detections across scans
Features:
- Device history tracking for repeat detection (24-hour window)
- Audio-capable BLE detection (headphones, mics, speakers)
- Classification reasons shown under each device
- Color-coded indicators with visual styling
- Microphone badge for audio-capable BLE devices
- Emit wifi_device, bt_device, rf_signal events as devices are found
- Add frontend handlers to populate device lists in real-time
- Add RF Signals panel to TSCM dashboard
- Dashboard now updates during sweep, not just at the end
- Add _scan_rf_signals() function using rtl_power to scan:
- FM broadcast band (88-108 MHz) for potential bugs
- 315/433/868/915 MHz ISM bands
- 1.2 GHz video transmitter band
- 2.4 GHz ISM band
- Integrate RF scanning into sweep with 60-second interval
- Add display_name field for all devices with friendly names
- Update frontend to use display_name in dropdowns
- Improve scan status display: '14 WiFi | 20 BT | 3 RF' instead of '14w 20b'
- Auto-select first SDR device when available
SDRFactory.detect_devices() returns SDRDevice dataclass objects,
not dictionaries. Fixed to access attributes directly instead of
using .get() method.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add /tscm/devices endpoint to list available WiFi interfaces,
Bluetooth adapters, and SDR devices
- Add _scan_wifi_networks() for actual WiFi scanning (macOS/Linux)
- Add _scan_bluetooth_devices() for actual Bluetooth scanning
- Update _run_sweep() to perform real scans with selected interfaces
- Add severity_counts tracking in progress events
- Fix frontend to correctly access device and severity data
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Restore APRS dynamic device selection and status bar
- Add ACARS status indicator with listening/receiving states
- Fix acars.py: use -o 4 for JSON, correct command order, add macOS pty fix
- Unify all start buttons (green) and stop buttons (red) across app
- Update help documentation with all modes (APRS, ACARS, Listening Post, TSCM)
- Add TSCM Alpha badge to sidebar
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Create routes/aprs.py with start/stop/stream endpoints for APRS decoding
- Support multiple regional frequencies (North America, Europe, Australia, etc.)
- Use direwolf (preferred) or multimon-ng as AFSK1200 decoder
- Parse APRS packets for position, weather, messages, and telemetry
- Add APRS visualization panel with Leaflet map and station tracking
- Include station list with callsigns, distance, and last heard time
- Add packet log with raw APRS data display
- Register APRS blueprint and add global state management
- Add direwolf and multimon-ng to dependency definitions
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add routes/acars.py with start/stop/stream endpoints for ACARS decoding
- Build acarsdec from source in Dockerfile (not available in Debian slim)
- Add acarsdec installation script to setup.sh for native installs
- Add ACARS to dependency checker in utils/dependencies.py
- Add collapsible ACARS sidebar next to map in aircraft tracking tab
- Add collapsible ACARS panel in ADS-B dashboard with same layout
- Include guidance about needing two SDRs for simultaneous ADS-B + ACARS
- Support regional frequency presets (N.America, Europe, Asia-Pacific)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Rebrand from INTERCEPT to iNTERCEPT
- New logo design with 'i' and signal wave brackets
- Add animated landing page with "See the Invisible" tagline
- Fix tuning dial audio issues with debouncing and restart prevention
- Fix Listening Post scanner with proper signal hit logging
- Update setup script for apt-based Python package installation
- Add Instagram promo video template
- Add full-size logo assets for external use
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The Listening Post module now uses the SDR abstraction layer to support
non-RTL-SDR devices via rx_fm (SoapySDR). Previously only rtl_fm worked.
- Add sdr_type parameter to /audio/start and /scanner/start endpoints
- Use appropriate command builder based on SDR type
- Update /tools endpoint to report rx_fm and supported SDR types
Fixes compatibility issue reported by DragonOS users with HackRF/Airspy.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The LoRa mode was removed because:
- rtl_433 cannot decode actual LoRa (CSS modulation)
- The 433MHz mode already handles ISM band devices
- True LoRa decoding requires specialized tools like gr-lora
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add new LoRa backend route (routes/lora.py) with:
- Frequency band definitions (EU868, US915, AU915, AS923, IN865, ISM433)
- Start/stop/stream/status endpoints using rtl_433
- Device pattern matching for LoRa/LPWAN devices
- Signal quality calculation from RSSI
- Add LoRa frontend UI with:
- Navigation button in SDR/RF group
- Band selector with channel presets
- Visualization layout (radar, device types, signal quality, activity log)
- Device card list with selection details
- Header stats for devices and signals
- Fix Bias-T toggle visibility for Listening Post and LoRa modes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When a new device is discovered with bluetoothctl, extract and
capture the RSSI value from the discovery line instead of
discarding it.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix scannerStatus -> scannerStatusText element reference
- Hide global signal meter (individual panels show signal)
- Expand Bluetooth device classification patterns
- Add more audio, phone, wearable, computer patterns
- Add manufacturer-based device type inference
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Backend:
- Send client updates when probes or signal change significantly
- Previously only new clients were reported, updates were ignored
Frontend:
- Add client cards to device list (was only showing networks)
- Fix rogue AP detection to check OUI - excludes legitimate mesh systems
- Improve channel recommendation with detailed usage breakdown
- Show per-channel interference counts for 2.4GHz
- Show unused channel count for 5GHz
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Layout changes:
- Security overview now next to network radar
- Channel utilization (2.4 GHz and 5 GHz) side by side
- Removed network topology panel
- Removed PMKID capture panel and functionality
Handshake improvements:
- Added "Crack with Aircrack-ng" button when handshake is captured
- Added /wifi/handshake/crack backend route
- Prompts for wordlist path with common defaults
- Shows password when found with notification
- 5 minute timeout with helpful error message
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Verify monitor interface actually exists before returning success
- Check for common interface naming patterns (wlan0mon, wlan1mon, etc.)
- Add interface existence check before starting scan
- Show available interfaces in error messages for debugging
- Better logging of monitor mode and scan failures
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Auto-enable monitor mode when clicking Start Scanning (no manual step needed)
- Improved WiFi interface detection using airmon-ng for chipset info
- Added lsusb fallback for USB adapter identification
- Fixed interface display format in enableMonitorMode callback
- Better error handling and status notifications during scan startup
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- WiFi interfaces now show driver, chipset, and MAC address for easier identification
- Remove signal history feature from WiFi and Bluetooth sections (HTML, JS, CSS, API)
- Fix Listen button in Listening Post signal hits to properly tune to frequency
- Make stopAudio() async and improve tuneToFrequency() with proper awaits
- Fix Device Intelligence panel auto-expand and manufacturer display
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Backend route to proxy photo requests from Planespotters API
- Frontend displays photo in Selected Target panel when available
- Photos are cached to avoid repeated API calls
- Clicking photo links to full image on Planespotters.net
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Line buffering only works with text mode, not binary pipes.
Fixes RuntimeWarning about line buffering.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Remove direct serial GPS dongle support in favor of gpsd daemon connectivity.
The UI now auto-connects to gpsd on page load and shows a GPS indicator when connected.
Simplify ADS-B dashboard controls bar for a cleaner, more compact layout.
Add setup-dev.sh for streamlined development environment setup.
- Remove GPSReader class and NMEA parsing (utils/gps.py)
- Consolidate to GPSDClient only with auto-connect endpoint
- Add GPS indicator with pulsing dot animation
- Compact controls bar with smaller fonts and tighter spacing
- Add aircraft database download banner/functionality
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add get_tool_path() to check /usr/sbin and /sbin for tools
- Update wifi.py to use full paths for airmon-ng, airodump-ng, aireplay-ng, aircrack-ng
- Add hcxdumptool and hcxtools to setup.sh for Debian and macOS
- Update check_cmd() in setup.sh to also check /usr/sbin and /sbin
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add debug stats (bytes_received, lines_received) to diagnose connection issues
- Capture stderr from dump1090 to show actual error messages on failure
- Add dump1090_running status to /adsb/status endpoint
- Fix aircraft_db.lookup() to handle Mictronics array format [reg, type, flags]
instead of expecting dict format {r: reg, t: type}
- Add logging for first few SBS lines to help debug parsing issues
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The enum is LIME_SDR (with underscore) but the code used LIMESDR,
causing an AttributeError on /adsb/tools endpoint.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix "no supported source" error by returning empty audio response
instead of JSON when audio not running (browser can't parse JSON)
- Add wait loop in stream endpoint to handle race condition with start
- Add logging for rtl_fm and ffmpeg commands
- Capture stderr to log actual process errors
- Check if processes exit immediately and log reason
- Improved error messages for users
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
