- Set min-height: 300px on main grid
- Set min-height: 120px on individual panels
- Set min-height: 80px on panel content
- Change dashboard from height: 100% to min-height: 100%
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New lightweight timeline component that shows RF signal presence
over time without heavy waterfall rendering:
- Horizontal swimlanes for each frequency/signal source
- Bars show transmission duration with height = signal strength
- Status colors: blue=new, gray=baseline, orange=burst, red=flagged
- Pattern detection for regular interval transmissions
- Click to expand and see individual transmission ticks
- Right-click to flag signals for investigation
- Auto-annotations for new signals, bursts, and patterns
- Tooltip with signal details on hover
- Time window selector (5m to 2h)
- Filter controls (hide baseline, show only new/burst)
Integrated into TSCM mode:
- Timeline created when TSCM mode is selected
- WiFi, Bluetooth, and RF signals feed into timeline
- Clears on new sweep start
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Extend signal cards to APRS, Sensors, and utility meter modes
- Add address tracking for automatic new/repeated/burst detection
- Create mode-specific filter bars with status and type filtering
- Add compact card variant for constrained layouts like APRS station list
- Add meter card type with consumption display and type-specific icons
- Refactor filter bar container to be shared across modes
- Add CSS for meter data display and distance display
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Create reusable signal-cards.css with status variants, protocol badges,
advanced panels, and filter bar styles
- Add signal-cards.js component for rendering pager message cards
- Integrate into pager mode with mute address, copy message, and
expandable details functionality
- Include interactive mockup for design reference
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add verbose_results flag to store full device details in sweep results
- Add non-interactive mode (--non-interactive) to setup.sh
- Add ask_yes_no helper for interactive prompts with TTY detection
- Update reports.py to handle new results structure with fallbacks
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Added a new login.js script to provide visual feedback and prevent double submission on the login form. Updated login.html to include the script and wire up the login button. Clarified credential configuration instructions in README.md.
- Added rtlamr mode for decoding utility meters (water, gas, electric)
- Starts rtl_tcp server first, then connects rtlamr to it
- Supports multiple message types: SCM, SCM+, IDM, NetIDM, R900, R900 BCD
- Added frequency presets for 912 MHz (NA) and 868 MHz (EU)
- Includes meter ID filtering and unique message options
- Updated setup.sh to check and install rtlamr and rtl_tcp
- Added UI components: navigation button, mode template, JavaScript functions
- Integrated into SDR/RF dropdown menu with lightning bolt icon
- Updates mode indicator with frequency when listening
- Added help documentation and requirements section
Introduced Flask-Limiter to restrict login attempts to 5 per minute per IP, enhancing security against brute-force attacks. Updated error handling to display a user-friendly message when the rate limit is exceeded. Minor improvements to the login page, including clearer error messages and display of the user's IP address.
- Add New Zealand (144.575 MHz) to APRS region dropdown
- Add Argentina, Brazil, and China regions
- Add custom frequency input option for user-specified frequencies
- Custom frequency field shows/hides dynamically when selected
- Properly disable/enable custom frequency control during operation
- CSS improvements for nav element flex behavior
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Revamps the login page layout and styles for a more modern, 'hacker' terminal look. Adds animated background effects, updates the login box and input styling, and enhances error messages with a new format. Also removes the tracked intercept.db file and ensures it is ignored in .gitignore.
- Consolidate sweep config and scan sources into one section
- Group baseline recording and meeting window under "Advanced"
- Create 2x2 grid layout for tool buttons
- Use visual dividers instead of separate sections
- Keep all functionality and IDs intact
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Show all controls directly instead of hiding them in collapsed
sections which was causing confusion.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Redesign the sidebar to be more minimal with collapsible sections
for Settings and Advanced options. Primary sweep action is now
prominently displayed, with tool buttons condensed to compact icons.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix tscmShowCapabilities to parse nested API response structure
- Build can/cannot detect lists dynamically from actual capabilities
- Display system info, limitations, and disclaimer
- Add 'Add to Known Devices' button in device detail modal
- New tscmAddToKnownDevices function with custom name prompt
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Change /tscm/playbooks to return array instead of dict
- Add id, name, category fields to each playbook for JS compatibility
- Fix tscmViewPlaybook JS to use correct field names (action/details/safety_note)
- Display when_to_escalate and documentation_required sections
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Relocate header utilities (UTC clock, theme toggle, dependencies
button, help button) to the navigation bar. Elements are grouped
logically with the clock on its own and tool buttons together,
all aligned to the far right of the nav bar.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Switch from CartoDB dark tiles to standard OpenStreetMap tiles
which show roads and more detail for tracking APRS stations.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add GPS indicator to APRS function bar
- Add user location marker on APRS map (yellow dot)
- Calculate and display distance to APRS stations in miles
- Show distance in station list and marker popups
- Center map on GPS location when available
- Update distances dynamically as GPS position changes
Uses same gpsd auto-connect mechanism as ADS-B section.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Move SDR configuration controls from sidebar to a horizontal function bar
above the map display for better visibility and accessibility. The bar
includes frequency/station/packet stats, region and gain controls, tool
status indicators, and start/stop buttons.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add spectrum monitoring via rtl_power with configurable presets
- Add OpenCelliD tower integration with Leaflet map display
- Add grgsm_scanner integration for passive GSM cell detection (alpha)
- Add rules engine for anomaly detection and findings
- Add baseline recording and comparison system
- Add setup.sh support for gr-gsm installation on Debian/Ubuntu
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix emergency alerts triggering for non-emergency squawk codes (VFR 1200/7000, etc.)
by checking squawkInfo.type === 'emergency' before alerting
- Fix emergency filter to only show actual emergency squawk codes
- Add acarsdec version detection to support both -j (newer) and -o 4 (older) JSON flags
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add European airband 8.33 kHz channel spacing to the step selector
in the main listening post interface.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When using custom frequency, a spacing selector appears allowing
choice between 25 kHz (standard) and 8.33 kHz (European) channel
spacing. The frequency step adjusts accordingly.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Backend changes (routes/aprs.py):
- Remove -q h flag from direwolf to enable audio level output
- Add parse_audio_level() to extract levels from direwolf output
- Add rate-limiting (max 10 updates/sec, min 2-level change)
- Push meter events to SSE queue as type='meter'
Frontend changes:
- Add signal meter widget to APRS sidebar
- Horizontal bar gauge with gradient (green->cyan->yellow->red)
- Numeric level display (0-100)
- "BURST" indicator for levels >70
- Status text (weak/moderate/strong signal)
- "No RF activity" state after 5 seconds of silence
- CSS styles in static/css/modes/aprs.css
Also added UK region to dropdown (same freq as Europe: 144.800)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add checkboxes for each ACARS frequency in the selected region
- Users can now select one or multiple frequencies instead of all
- Frequencies stay checked when switching regions if they exist in both
- Falls back to all region frequencies if none selected
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add updateAirbandSquelch() to restart audio when squelch slider changes
- Remove verbose diagnostic logging from audio streaming
- Remove tee diagnostic for raw rtl_fm output
- Keep error logging for troubleshooting
- Simplify audio stream generator
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add /settings/rtlsdr/driver-status endpoint to check for loaded DVB modules
- Add /settings/rtlsdr/blacklist-drivers endpoint to unload modules and create blacklist
- Show warning banner on dashboard when DVB conflict detected
- Provide "Fix Now" button to automatically resolve the issue
- Warn users that their RTL-SDR devices may not work until drivers are blacklisted
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Show descriptive device names: RTL-SDR #0 (serial) instead of SDR 0
- Include last 4 digits of serial number for identification
- Add tooltip with full device name and serial
- Hide audio player element (no visible playback bar)
- Add debug logging for airband device selection
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove crossorigin="anonymous" attribute that may cause CORS issues
- Add controls attribute so user can manually play if autoplay blocked
- Show/hide audio player element when listening starts/stops
- Hide visualizer container on stop
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Convert startAirband to async function
- Add 300ms delay after backend start for stream readiness
- Properly reset audio element before connecting to stream
- Add both oncanplay and immediate play() for browser compatibility
- Add console logging for debugging
- Show visualizer container when audio starts
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use existing showSquawkInfo() for squawk button instead of custom modal
- Fix airband audio by waiting for canplay event before calling play()
- Add proper audio state reset before starting new stream
- Remove unused showSquawkReference function
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add "Radar" toggle in display controls to overlay radar effect on map
- Radar overlay shows sweep line, range rings, compass rose, center point
- Fix squawk button using addEventListener instead of inline onclick
- Add missing airbandStatus element to fix null error
- Improve squawk modal with click-outside-to-close
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix status dot to be red when inactive, green when tracking
- Add additional map invalidateSize call to fix missing tiles on load
- Add type="button" and z-index to strip buttons for proper click handling
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add slim statistics bar with live stats (aircraft count, max range,
highest altitude, fastest speed, closest aircraft, countries, ACARS)
- Add session timer and report generation with JSON export
- Add signal quality indicator with visual dots
- Add squawk code reference modal
- Add flight lookup button (FlightAware integration)
- Add aircraft type icons (jet, helicopter, prop, military, glider)
- Move status indicator and UTC time from header to stats strip
- Reorganize controls bar into logical groups
- Add ICAO country allocation data for nationality detection
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove aircraft.html partial and all aircraft mode JS code
- Navigation buttons now link directly to /adsb/dashboard
- Remove Leaflet MarkerCluster (only used for aircraft)
- Clean up help section aircraft references
- Remove checkAdsbTools function and related code
- Add volume slider with speaker icon next to squelch control
- Apply initial volume when audio starts
- Add updateAirbandVolume() function for real-time volume changes
- Add ADS-B device selector with label before START button
- Add Listen label for airband device selector
- Track which device is actively used for ADS-B tracking
- Disable ADS-B device selector while tracking is active
- Update device conflict detection to use actual selected device
- Consolidate device selector initialization into single function
- Remove duplicate device loading from initAirband()
- Add APRS to mobile navigation bar (was missing)
- Fix CSS that was forcing aircraft visuals to always display
- Only apply flex layout to visuals when they are actually visible
- Fix ADS-B dashboard mobile layout with proper flex ordering
- Reset grid properties on mobile for proper stacking
- Hide ACARS sidebar on mobile (desktop only feature)
