ensureModeScript() used document.body.appendChild() to load lazy mode
scripts, but the preload for ?mode= query params runs in <head> before
<body> exists, causing all deep-linked modes to silently fail.
Also fix cross-mode handoffs (BT→BT Locate, WiFi→WiFi Locate,
Spy Stations→Waterfall) that assumed target module was already loaded.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Several modes didn't pass sdr_type to claim_sdr_device(), defaulting to
'rtlsdr' and triggering an rtl_test USB probe that fails for HackRF with
a confusing "check that the RTL-SDR is connected" message.
- Add sdr_type to frontend start requests for rtlamr, weather-sat, sstv-general
- Read sdr_type in backend routes and pass to claim/release_sdr_device()
- Add early guard returning clear "not yet supported" error for non-RTL-SDR
hardware in modes that are hardcoded to RTL-SDR tools
- Make probe_rtlsdr_device error message device-type-agnostic
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Extends the rtl_tcp support (added in c1339b6 for APRS, Morse, DSC) to
the weather satellite mode. When a remote SDR host is provided, SatDump
uses --source rtltcp instead of --source rtlsdr, local device claiming
is skipped, and the frontend sends rtl_tcp params via getRemoteSDRConfig().
Closes#166
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add synchronous startup verification after Popen() — sleep 0.5s and poll
the process before returning to the caller. If SatDump exits immediately
(missing device, bad args), raise RuntimeError with the actual error
message instead of returning status: 'started'. Keep a shorter (2s) async
backup check for slower failures.
Also fix --source_id handling: omit the flag entirely when no serial number
is found instead of passing "0" which SatDump may reject. Change start()
and start_from_file() to return (bool, str|None) tuples so error messages
propagate through to the HTTP response.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The default 1 MHz sample rate was too low for SatDump's meteor_m2-x_lrpt
pipeline, causing NOSYNC and 0.000dB SNR. Bumped to 2.4 MHz (SatDump
recommendation) and wired up the WEATHER_SAT_SAMPLE_RATE config value
so it actually gets passed to decoder.start() from both the auto-scheduler
and manual start route.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Security: replace path traversal-vulnerable str().startswith() with
is_relative_to(), anchor path checks to app root, strip filesystem
paths from error responses, add decoder-level path validation.
Architecture: use safe_terminate/register_process for subprocess
lifecycle, replace custom SSE generator with sse_stream(), use
centralized validate_* functions, remove unused app.py declarations.
Bugs: add thread-safe singleton locks, protect _images list across
threads, move blocking process.wait() to async daemon thread, fix
timezone handling for tz-aware datetimes, use full path for image
deduplication, guard TLE auto-refresh during tests, validate
scheduler parameters to avoid 500 errors.
Docker: pin SatDump to v1.2.2 and slowrx to ca6d7012, document
INTERCEPT_IMAGE fallback pattern.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
1. utils/weather_sat.py — Added delete_all_images() method that globs for *.png, *.jpg, *.jpeg in the output dir, unlinks each, clears _images list, and returns the
count.
2. routes/weather_sat.py — Added DELETE /weather-sat/images route that calls decoder.delete_all_images() and returns {'status': 'ok', 'deleted': count}.
3. static/js/modes/weather-satellite.js:
- Added currentModalFilename state variable
- renderGallery() now sorts images by timestamp descending, groups by date using toLocaleDateString(), renders date headers spanning the grid, and adds a delete
overlay button on each card
- showImage() accepts a filename param, stores it in currentModalFilename, and creates a modal toolbar with a delete button
- Added deleteImage(filename) — confirm dialog → DELETE /weather-sat/images/{filename} → filter from array → re-render + close modal
- Added deleteAllImages() — confirm dialog → DELETE /weather-sat/images → clear array → re-render
- Exposed deleteImage, deleteAllImages, and _getModalFilename in public API
4. static/css/modes/weather-satellite.css:
- Added position: relative to .wxsat-image-card
- .wxsat-image-actions — absolute top-right overlay, hidden by default, appears on card hover
- .wxsat-image-actions button — dark background, turns red on hover
- .wxsat-date-header — full-grid-width date separator with dimmed uppercase text
- .wxsat-modal-toolbar — absolute top-left in modal for the delete button
- .wxsat-modal-btn.delete — turns red on hover
- .wxsat-gallery-clear-btn — subtle icon button, pushed right via margin-left: auto, turns red on hover
- Updated .wxsat-gallery-header from justify-content: space-between to gap: 8px for proper 3-child layout
5. templates/index.html — Added clear-all trash button with SVG icon in the gallery header, wired to WeatherSat.deleteAllImages().
- Fix SDR device stuck claimed on capture failure via on_complete callback
- Improve SatDump output parsing to emit all lines (throttled 2s) for real-time feedback
- Extract shared pass prediction into utils/weather_sat_predict.py with trajectory/ground track support
- Add auto-scheduler (utils/weather_sat_scheduler.py) using threading.Timer for unattended captures
- Add scheduler API endpoints (enable/disable/status/passes/skip) with SSE event notifications
- Add countdown timer (D/H/M/S) with imminent/active glow states
- Add 24h timeline bar with colored pass markers and current-time cursor
- Add canvas polar plot showing az/el trajectory arc with cardinal directions
- Add Leaflet ground track map with satellite path and observer marker
- Restructure to 3-column layout (passes | polar+map | gallery) with responsive stacking
- Add auto-schedule toggle in strip bar and sidebar
- Add rtlamr (Go utility meter decoder) to Dockerfile
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
