Three issues caused POCSAG messages to be incorrectly hidden or
misclassified in the Device Intelligence panel:
1. detectEncryption used a narrow character class ([a-zA-Z0-9\s.,!?-])
to measure "printable ratio". Messages containing common printable
ASCII characters like : = / + @ fell below the 0.8 threshold and
returned null ("Unknown") instead of false ("Plaintext"). Simplified
to check all printable ASCII (\x20-\x7E) which correctly classifies
base64, structured data, and punctuation-heavy content.
2. The default hideToneOnly filter was true, hiding all address-only
(Tone) pager messages. When RF conditions cause multimon-ng to decode
the address but not the message content, the resulting Tone card was
silently filtered. Changed default to false so users see all traffic
and can opt-in to filtering.
3. The multimon-ng output parser only recognized "Alpha" and "Numeric"
content type labels. Added a catch-all pattern to capture any
additional content type labels that future multimon-ng versions or
forks might emit, rather than dropping them to raw output.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Use postMessage from parent page to notify the satellite dashboard
iframe of visibility changes, preventing unnecessary POST requests
to /satellite/position when the user isn't viewing satellite mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Full-stack meteor scatter monitoring mode that captures IQ data from
an RTL-SDR, computes FFT waterfall frames via WebSocket, and runs a
real-time detection engine to identify transient VHF reflections from
meteor ionization trails (e.g. GRAVES radar at 143.050 MHz).
Backend: MeteorDetector with EMA noise floor, SNR threshold state
machine (IDLE/DETECTING/ACTIVE/COOLDOWN), hysteresis, and CSV/JSON
export. WebSocket at /ws/meteor for binary waterfall frames, SSE at
/meteor/stream for detection events and stats.
Frontend: spectrum + waterfall + timeline canvases, event table with
SNR/duration/confidence, stats strip, turbo colour LUT. Uses shared
SDR device selection panel with conflict tracking.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move tracking state, balloon count, last update, and waveform from the
sidebar into a stats strip above the map, matching the APRS strip pattern.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Reusable SVG bar waveform (SignalWaveform.Live) that animates in response
to incoming SSE data — idle breathing when stopped, active oscillation
proportional to telemetry update frequency, smooth decay on signal loss.
Integrated into radiosonde Status section with ping() on each balloon
message and stop() on tracking stop. Also hardens the fetch error path
to show a readable message instead of a JSON parse error when the server
returns HTML.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
SSE EventSource connections for AIS, ACARS, VDL2, and radiosonde were
not closed when switching modes, causing fd exhaustion after repeated
switches. Also fixes socket leaks on exception paths in AIS/ADS-B
stream parsers, closes subprocess pipes in safe_terminate/cleanup, and
caches skyfield timescale at module level to avoid per-request fd churn.
Closes#169
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#164. Only pager and sensor routes supported rtl_tcp connections.
Now aprs, morse, and dsc routes follow the same pattern: extract
rtl_tcp_host/port from the request, skip local device claiming for
remote connections, and use SDRFactory.create_network_device(). DSC also
refactored from manual rtl_fm command building to use SDRFactory's
builder abstraction. Frontend wired up for all three modes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Change 'already_running' to 'already_scanning' status in bluetooth_v2
so frontend recognizes the response and connects the SSE stream
- Hide pagerScopePanel and sensorScopePanel in switchMode() to prevent
audio waveform bars leaking into other modes
- Clear devices Map, pendingDeviceIds Set, and UI in BluetoothMode.destroy()
to prevent memory accumulation on repeated mode switches
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Mode modules were leaking EventSource connections, setInterval timers,
and setTimeout timers on every mode switch, causing progressive browser
sluggishness. Added destroy() to 8 modules missing it (meshtastic,
bluetooth, wifi, bt_locate, sstv, sstv-general, websdr, spy-stations)
and centralized all destroy calls in switchMode() via a moduleDestroyMap
that cleanly tears down only the previous mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Integrate radiosonde_auto_rx for automatic weather balloon detection and
decoding on 400-406 MHz. Includes UDP telemetry parsing, Leaflet map with
altitude-colored markers and trajectory tracks, SDR device registry
integration, setup script installation, and Docker support.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The registry used plain int keys (device index), so HackRF at index 0
and RTL-SDR at index 0 would collide. Changed to composite string keys
("sdr_type:index") so each SDR type+index pair is tracked independently.
Updated all route callers, frontend device selectors, and session restore.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace broken app.gps_state lookup with utils.gps.get_current_position()
and return GPS metadata (fix quality, satellites, accuracy). Shrink location
card to single-column with 200px globe, move System Info into row 2.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add SVG arc gauge, per-core CPU bars, temperature sparkline, network
interface monitoring with bandwidth deltas, disk I/O rates, 3D globe
with observer location, weather overlay, battery/fan/throttle support,
and process grid layout. New /system/location and /system/weather endpoints.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Real-time dashboard for host metrics (CPU, memory, disk, temperatures),
active decoder process status, and SDR device enumeration via SSE streaming.
Auto-connects when entering the mode with graceful psutil fallback.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The .btn, .btn-sm, and .btn-ghost classes used by morse mode buttons
(TXT, CSV, Copy, Clear) were defined in core/components.css but the
stylesheet was never loaded in index.html, causing unstyled buttons.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
rtl_fm prints device info, tuning, and errors to stderr but the morse
route only logged these server-side. Now stderr lines are forwarded to
the morse queue as info events, displayed in a compact diagnostic log
below the scope canvas. After 10s with no audio data, the scope text
escalates to prompt the user to check the SDR log.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace blocking rtl_stdout.read() with select()+os.read() so the
decoder thread emits diagnostic heartbeat scope events when rtl_fm
produces no PCM data (common in direct sampling mode). Add waiting-state
rendering in the scope canvas and hide the generic placeholder/status
bar for morse mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#155 — users can now access settings directly from the welcome
screen without entering a mode first.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix "What's New" section shifting up/down on smaller screens (#157) by
isolating the logo pulse animation to its own compositing layer, stabilizing
the scrollbar gutter, and pinning the welcome container dimensions.
Morse mode improvements: relocate scope and decoded output panels to the
main content area, use shared SDR device controls, and reduce panel heights
for better layout.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New signal mode for decoding Morse code (CW) transmissions via SDR.
Includes route blueprint, utility decoder, frontend UI, and tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Make stopAprs() async and await backend stop completion before
re-enabling the Start button, preventing race where a late stop
request kills newly started processes
- Add cache-buster param to EventSource URL to prevent browser
SSE connection reuse between stop/start cycles
- Capture aprs_active_device locally in stream_aprs_output so the
old thread's finally block doesn't release a device claimed by
a new session
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Number(null) evaluates to 0 which passes Number.isFinite(),
causing aprsHasValidCoordinates(null, null) to return true.
This made initAprsMap() center the map at [0,0] (Gulf of Guinea)
at zoom 8 instead of the US default, hiding all station markers
off-screen.
Add null guards (lat != null && lon != null) to reject null/undefined
while still accepting 0 as a valid equator coordinate.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Flash the Start button itself with amber pulse when clicked without a
station selected, and show "Select Station" in the strip status text
right next to the button so the error is immediately visible.
Add a 24-hour timeline bar with broadcast window markers, red UTC time
cursor, and countdown boxes (HRS/MIN/SEC) that tick down to the next
broadcast. Broadcasts show as amber blocks on the timeline track with
imminent/active visual states matching the weather satellite pattern.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix silent failure when starting without station/frequency selected by
flashing amber on status text and dropdowns. Add auto-capture scheduler
that uses fixed UTC broadcast schedules from station data to
automatically start/stop WeFax decoding at broadcast times.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Implement HF radiofax decoding with custom Python DSP pipeline
(rtl_fm USB → Goertzel/Hilbert demodulation), 33-station database
with broadcast schedules, audio waveform scope, live image preview,
and decoded image gallery. Amber/gold UI theme for HF distinction.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- _waitForPlayback now only succeeds on playing/timeupdate events, not
loadeddata/canplay which fire from just the WAV header before real
audio arrives
- stopMonitor() pauses audio and updates UI immediately instead of
blocking on the backend stop request (1+ second delay)
- Reduced backend audio stop sleep from 1.0s to 0.15s; the start
retry loop already handles USB contention
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Waterfall: load waterfall.css eagerly in <head> instead of lazily on
mode switch; the lazy inject raced with the panel becoming visible,
leaving unstyled HTML for up to 20 s on cold cache
- WebSDR: await a requestAnimationFrame before calling Globe()(mapEl) so
the browser has committed the display:flex layout and clientWidth/
clientHeight are non-zero; previously the globe WebGL renderer was
created at 0×0 (especially on warm-cache refreshes) and could not
recover via the deferred resize calls
- Bump version to 2.22.2
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Browsers require PNG icons (192x192, 512x512) in the manifest to show
the install prompt. SVG-only manifests are not sufficient. Also adds the
180x180 apple-touch-icon PNG for iOS home screen, bumps SW cache to v3,
and adds scope to the manifest.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ribs