Add synchronous startup verification after Popen() — sleep 0.5s and poll
the process before returning to the caller. If SatDump exits immediately
(missing device, bad args), raise RuntimeError with the actual error
message instead of returning status: 'started'. Keep a shorter (2s) async
backup check for slower failures.
Also fix --source_id handling: omit the flag entirely when no serial number
is found instead of passing "0" which SatDump may reject. Change start()
and start_from_file() to return (bool, str|None) tuples so error messages
propagate through to the HTTP response.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
TSCM RF scan now auto-detects HackRF via SDRFactory and uses
hackrf_sweep as an alternative to rtl_power. Also includes
improvements to listening post, rtlamr, weather satellite,
SubGHz, Meshtastic, SSTV, WeFax, and process monitor modules.
Fixes#154
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New signal mode for decoding Morse code (CW) transmissions via SDR.
Includes route blueprint, utility decoder, frontend UI, and tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Implement HF radiofax decoding with custom Python DSP pipeline
(rtl_fm USB → Goertzel/Hilbert demodulation), 33-station database
with broadcast schedules, audio waveform scope, live image preview,
and decoded image gallery. Amber/gold UI theme for HF distinction.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix wrong VIS codes for PD90 (96→99), PD120 (93→95), PD180 (95→97),
PD240 (113→96), and ScottieDX (55→76). This caused PD180 to be detected
as PD90 and PD120 to fail entirely.
Replace batch Goertzel pixel decoding with analytic signal (Hilbert
transform) FM demodulation. The Goertzel approach used 96-sample windows
with ~500 Hz resolution — wider than the 800 Hz pixel frequency range —
making accurate pixel decoding impossible for fast modes like Martin2
and Scottie2. The Hilbert method computes per-sample instantaneous
frequency, matching the approach used by QSSTV and other professional
SSTV decoders.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Tolerate intermittent ambiguous windows during leader detection (up to
3 consecutive misses), use energy-based break detection when tone
classification fails at leader-break boundary, and add single-bit VIS
error correction for parity-bit and data-bit corruption on noisy HF.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a unified analytics mode under the Security nav group that aggregates
data across all signal modes. Includes emergency squawk alerting (7700/7600/7500),
vertical rate anomaly detection, ACARS/VDL2-to-ADS-B flight correlation,
geofence zones with enter/exit detection for aircraft/vessels/APRS stations,
temporal pattern detection, RSSI history tracking, Meshtastic topology mapping,
and JSON/CSV data export.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New modes:
- BT Locate: SAR Bluetooth device location with GPS-tagged signal trail,
RSSI-based proximity bands, audio alerts, and IRK auto-extraction from
paired devices (macOS plist / Linux BlueZ)
- GPS: Real-time position tracking with live map, speed, heading, altitude,
satellite info, and track recording via gpsd
Bug fixes:
- Fix ABBA deadlock between session lock and aggregator lock in BT Locate
- Fix bleak scan lifecycle tracking in BluetoothScanner (is_scanning property
now cross-checks backend state)
- Fix map tile persistence when switching modes
- Use 15s max_age window for fresh detections in BT Locate poll loop
Documentation:
- Update README, FEATURES.md, USAGE.md, and GitHub Pages with new modes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Strip ITU-R M.493 phasing symbols (120-126) after dot pattern sync before
decoding message content. Fix MMSI BCD digit trimming direction and correct
test symbol encodings for position and MMSI edge cases.
Add .gitignore entry for data/subghz/captures/ to prevent large
IQ recording files from being committed.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Created test_weather_sat_routes.py with 42 tests for all endpoints
- Created test_weather_sat_decoder.py with 47 tests for WeatherSatDecoder class
- Created test_weather_sat_predict.py with 14 tests for pass prediction
- Created test_weather_sat_scheduler.py with 31 tests for auto-scheduler
- Total: 134 test functions across 14 test classes
- All tests follow existing patterns (mocking, fixtures, docstrings)
- Tests cover happy paths, error handling, and edge cases
- Mock all external subprocess calls and HTTP requests
Co-authored-by: mitchross <6330506+mitchross@users.noreply.github.com>
The box-drawing character filter was dropping ANY line containing │ or ─,
including dsd-fme data lines that use these as column separators (e.g.
"DMR BS │ Slot 1 │ TG: 12345 │ SRC: 67890"). Now only filters lines
that are purely decorative (no alphanumeric content).
Also adds -J /dev/stderr so dsd-fme writes its event log to stderr
where we capture it, and debug logging of raw stderr lines.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
-fd means D-STAR in dsd-fme, not DMR — causing sync detection
(shared C4FM modulation) but no decoded data. DMR Simplex is -fs.
Also fix -o - (invalid in dsd-fme) to -o null for headless servers,
add D-STAR flag mapping, and handle TGT/SRC output format in parser.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
dsd-fme remapped several flags from classic DSD: -fp is ProVoice (not
P25), -fi is NXDN48 (not D-Star), -fv doesn't exist. This caused P25
to trigger ProVoice decoding and D-Star to trigger NXDN48. Corrected
flag table and added C4FM modulation hints for better sync reliability.
Also fixes: device panel showing "DMR" regardless of protocol, signal
activity status flip-flopping between LISTENING and IDLE, and rtl_fm
squelch chopping the bitstream mid-frame. Adds PPM correction and
relax CRC controls for fine-tuning on marginal signals.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The _DSD_FME_PROTOCOL_FLAGS dictionary had every protocol flag wrong,
causing dsd-fme (the preferred binary) to receive invalid or mismatched
-f flags. Also fix orphaned process leak on startup failure and add
centralized input validation for frequency/gain/device.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Remove all GSM cellular intelligence features including tower scanning,
signal monitoring, rogue detection, crowd density analysis, and
OpenCellID integration across routes, templates, utils, tests, and
build configuration.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The EGSM900 band table had start=925e6 but ARFCNs 0-124 use downlink
frequencies starting at 935 MHz (DL = 935 + 0.2*ARFCN). The 925 MHz
value is the E-GSM extension band (ARFCNs 975-1023).
This caused grgsm_livemon to tune 10 MHz too low — ARFCN 22 tuned to
929.4 MHz instead of 939.4 MHz, receiving no GSM frames and producing
zero GSMTAP packets for tshark to capture.
Also adds EGSM900_EXT band (ARFCNs 975-1023, DL 925.2-934.8 MHz)
and diagnostic logging in the monitor thread to track raw tshark
line counts vs parsed packets.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- /lookup_cell and /detect_rogue rejected CID=0 towers because
`all([..., cid])` is falsy when cid=0; use `is not None` checks
- can_use_api() now returns False when GSM_OPENCELLID_API_KEY is empty,
preventing the geocoding worker from wasting daily quota on doomed calls
- /lookup_cell returns 503 with clear message when API key not configured
- parse_tshark_output uses rstrip('\n\r') instead of strip() to preserve
leading empty tab-separated fields (strip() ate leading tabs, shifting
all columns when the first field was empty)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
CID=0 with valid MCC/MNC means the scanner found the cell but didn't
decode System Information 3/4 (which carries the Cell ID). These are
still valid towers worth displaying. Only filter when MCC=0 AND MNC=0
(truly unidentified signals).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Backend:
- Filter out CID=0 and MCC=0 entries (ARFCNs with no decoded cell identity)
Frontend:
- Move stats update before coordinate check so towers always counted
- Fix signal_strength display using null check instead of || (0 is falsy)
- Show operator name, frequency, and status in tower detail panel
- Show "Located" indicator in tower list for geocoded towers
- Fix selectTower crash when tower has no coordinates
- Update placeholder text to "Select a tower from the list"
- Add try/catch to selectTower for error resilience
Tests:
- Add tests for CID=0 and MCC=0 filtering
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Parser expected pipe-delimited table rows but grgsm_scanner outputs
comma-separated key-value pairs like:
ARFCN: 975, Freq: 925.2M, CID: 13522, LAC: 38722, MCC: 262, MNC: 1, Pwr: -58
This was the root cause of no data appearing in GSM Spy.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace the batch rtl_power SSE pipeline with continuous I/Q streaming
via WebSocket for smooth ~25fps waterfall display. The server captures
raw I/Q samples (rtl_sdr/rx_sdr), computes Hann-windowed FFT, and
sends compact binary frames (1035 bytes vs ~15KB JSON, 93% reduction).
Client falls back to existing SSE path if WebSocket is unavailable.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The DSD stderr parser had regex ordering bugs that swallowed voice and
call events as bare slot events, and only matched classic dsd output
format (not dsd-fme). Unmatched lines were silently dropped, leaving
the signal activity panel with nothing to display.
- Reorder regex checks: TG/Src before voice before slot
- Support dsd-fme comma-separated format (TG: x, Src: y)
- Make bare slot regex strict (only standalone "Slot N" lines)
- Forward unmatched DSD lines as raw events for diagnostics
- Add LISTENING state to signal activity panel for raw output
- Show raw decoder output text below synthesizer canvas
- Fix test mocks for find_dsd() tuple return value
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
slowrx is a GTK GUI app that doesn't support CLI usage, so the SSTV
decoder was silently failing. This replaces it with a pure Python
implementation using numpy and Pillow that supports Robot36/72,
Martin1/2, Scottie1/2, and PD120/180 modes via VIS header auto-detection.
Key implementation details:
- Generalized Goertzel (DTFT) for exact-frequency tone detection
- Vectorized batch Goertzel for real-time pixel decoding performance
- Overlapping analysis windows for short-window frequency estimation
- VIS header detection state machine with parity validation
- Per-line sync re-synchronization for drift tolerance
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- DMR/P25 digital voice decoder mode with DSD-FME integration
- WebSDR mode with KiwiSDR audio proxy and websocket-client support
- Listening post waterfall/spectrogram visualization and audio streaming
- Dockerfile updates for mbelib and DSD-FME build dependencies
- New tests for DMR, WebSDR, KiwiSDR, waterfall, and signal guess API
- Chart.js date adapter for time-scale axes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
