- Fix XSS: escape ASCII output in innerHTML via escapeHtml()
- Fix deadlock: use put_nowait() for queue ops under ook_lock
- Fix SSE leak: add ook to moduleDestroyMap so switching modes
closes the EventSource
- Fix RSSI: explicit null check preserves valid zero values in
JSON export
- Add frame cap: trim oldest frames at 5000 to prevent unbounded
memory growth on busy bands
- Validate timing params: wrap int() casts in try/except, return
400 instead of 500 on invalid input
- Fix PWM hint: correct to short=0/long=1 matching rtl_433
OOK_PWM convention (UI, JS hints, and cheat sheet)
- Fix inversion docstring: clarify fallback only applies when
primary hex parse fails, not for valid decoded frames
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace hardcoded frequency buttons with localStorage-backed presets.
Default presets are standard ISM frequencies (433.920, 315, 868, 915 MHz).
Users can add custom frequencies, right-click to remove, and reset to
defaults — matching the pager module pattern.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Covers identifying modulation type (PWM/PPM/Manchester), finding
pulse timing via rtl_433 -A, common ISM frequencies and timings,
and troubleshooting tips for tolerance and bit order.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix double-scroll by switching ookOutputPanel to flex layout
- Keep decoded frames visible after stopping (persist for review)
- Wire global Clear/CSV/JSON status bar buttons to OOK functions
- Hide default output pane in OOK mode (uses own panel)
- Add command display showing the active rtl_433 command
- Add JSON export and auto-scroll support
- Fix 0x prefix stripping in OOK hex decoder
- Fix PWM encoding hint text
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Timing presets: five quick-fill buttons (300/600, 300/900, 400/800, 500/1500, 500 MC)
that populate all six pulse-timing fields at once — maps to CTF flag timing profiles
- RSSI per frame: add -M level to rtl_433 command; parse snr/rssi/level from JSON;
display dB SNR inline with each frame; include rssi_db column in CSV export
- Auto bit-order suggest: "Suggest" button counts printable chars across all stored
frames for MSB vs LSB, selects the winner, shows count — no decoder restart needed
- Pattern filter: live hex/ASCII filter input above the frame log; hides non-matching
frames and highlights matches in green; respects current bit order
- TSCM integration: "Decode (OOK)" button in RF signal device details panel switches
to OOK mode and pre-fills frequency — frontend-only, no backend changes needed
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Several modes didn't pass sdr_type to claim_sdr_device(), defaulting to
'rtlsdr' and triggering an rtl_test USB probe that fails for HackRF with
a confusing "check that the RTL-SDR is connected" message.
- Add sdr_type to frontend start requests for rtlamr, weather-sat, sstv-general
- Read sdr_type in backend routes and pass to claim/release_sdr_device()
- Add early guard returning clear "not yet supported" error for non-RTL-SDR
hardware in modes that are hardcoded to RTL-SDR tools
- Make probe_rtlsdr_device error message device-type-agnostic
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The "Mute" button on pager cards persists muted addresses to
localStorage with no visible indicator, making it easy to
accidentally hide an address and forget about it. This caused
flag fragment messages on RIC 1337 to silently disappear.
- Add "X muted source(s) — Unmute All" indicator to sidebar
- Stop persisting hideToneOnly filter across sessions so the
default (show all) always applies on page load
- Remove default checked state from Tone Only filter checkbox
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add theme-aware severity/neon CSS variables and replace hardcoded hex
colors (#fff, #000, #00ff88, #ffcc00, etc.) with var() references
across 26 files so text remains readable in both dark and light themes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Nav active labels used color: var(--bg-primary) which resolved to
near-white on light backgrounds. Run-state chips and buttons had
hardcoded dark RGBA backgrounds. Added light-theme overrides for
readable text and appropriate light backgrounds.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Backend: Add /prefetch-images endpoint that warms the image cache in
parallel using a thread pool, skipping already-cached images.
Frontend: Trigger prefetch on mode init so images load instantly.
Replace per-request Date.now() cache-bust with a 5-minute rotating
key to allow browser caching aligned with backend max-age.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Meteor: onopen callback used closure variable _ws instead of `this`,
so a double-click during CONNECTING state sent on the wrong socket.
Also clean up any in-progress connection on re-start, not just running ones.
Setup: make apt-get update non-fatal so third-party repo errors
(e.g. stale PPAs on Debian) don't abort the entire install.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Full-stack meteor scatter monitoring mode that captures IQ data from
an RTL-SDR, computes FFT waterfall frames via WebSocket, and runs a
real-time detection engine to identify transient VHF reflections from
meteor ionization trails (e.g. GRAVES radar at 143.050 MHz).
Backend: MeteorDetector with EMA noise floor, SNR threshold state
machine (IDLE/DETECTING/ACTIVE/COOLDOWN), hysteresis, and CSV/JSON
export. WebSocket at /ws/meteor for binary waterfall frames, SSE at
/meteor/stream for detection events and stats.
Frontend: spectrum + waterfall + timeline canvases, event table with
SNR/duration/confidence, stats strip, turbo colour LUT. Uses shared
SDR device selection panel with conflict tracking.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
SSTV mode was slow to populate next-pass countdown and ISS location map
due to uncached skyfield computation and sequential JS API calls.
- Cache ISS position (10s TTL) and schedule (15min TTL, keyed by rounded lat/lon)
- Cache skyfield timescale object (expensive to create on every request)
- Reduce external API timeouts from 5s to 3s
- Fire checkStatus, loadImages, loadIssSchedule, updateIssPosition in parallel via Promise.all
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add flex-shrink: 0 so the strip holds its intrinsic height instead of
being distorted by the parent flex container.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move tracking state, balloon count, last update, and waveform from the
sidebar into a stats strip above the map, matching the APRS strip pattern.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Reusable SVG bar waveform (SignalWaveform.Live) that animates in response
to incoming SSE data — idle breathing when stopped, active oscillation
proportional to telemetry update frequency, smooth decay on signal loss.
Integrated into radiosonde Status section with ping() on each balloon
message and stop() on tracking stop. Also hardens the fetch error path
to show a readable message instead of a JSON parse error when the server
returns HTML.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The visual refresh layer hardcoded dark rgba() gradients that overrode
variable-based backgrounds. Added [data-theme="light"] overrides for
visual refresh CSS variables and comprehensive component backgrounds
in index.css and global-nav.css.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Remove section hover shift, fix broken NOAA PDF link, reorder sections
to match Weather Satellite pattern, and fix text alignment spacing.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Escape ac.icao, callsign, typeCode with escapeHtml() in aircraft card (XSS)
- Add linking comments between duplicated IATA_TO_ICAO mappings
- VDL2 sidebar: single-click selects aircraft, double-click opens modal
- Remove stale ICAOs from acarsAircraftIcaos in cleanupOldAircraft()
- Add null guard to drawPolarPlot() in weather-satellite.js
- Move deferred imports (translate_message, get_flight_correlator) to module level
- Check all frequency checkboxes by default on initial load
- Remove extra blank lines and uncertain MC/MCO airline code entry
- Add TODO comments linking duplicated renderAcarsCard implementations
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Extends the rtl_tcp support (added in c1339b6 for APRS, Morse, DSC) to
the weather satellite mode. When a remote SDR host is provided, SatDump
uses --source rtltcp instead of --source rtlsdr, local device claiming
is skipped, and the frontend sends rtl_tcp params via getRemoteSDRConfig().
Closes#166
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#164. Only pager and sensor routes supported rtl_tcp connections.
Now aprs, morse, and dsc routes follow the same pattern: extract
rtl_tcp_host/port from the request, skip local device claiming for
remote connections, and use SDRFactory.create_network_device(). DSC also
refactored from manual rtl_fm command building to use SDRFactory's
builder abstraction. Frontend wired up for all three modes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Change 'already_running' to 'already_scanning' status in bluetooth_v2
so frontend recognizes the response and connects the SSE stream
- Hide pagerScopePanel and sensorScopePanel in switchMode() to prevent
audio waveform bars leaking into other modes
- Clear devices Map, pendingDeviceIds Set, and UI in BluetoothMode.destroy()
to prevent memory accumulation on repeated mode switches
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Resolved conflicts:
- routes/acars.py: keep /messages and /clear endpoints for history reload
- routes/vdl2.py: keep /messages and /clear endpoints for history reload
- templates/adsb_dashboard.html: keep removal of hardcoded device-1
defaults for ACARS/VDL2 selectors (users pick their own device)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Mode modules were leaking EventSource connections, setInterval timers,
and setTimeout timers on every mode switch, causing progressive browser
sluggishness. Added destroy() to 8 modules missing it (meshtastic,
bluetooth, wifi, bt_locate, sstv, sstv-general, websdr, spy-stations)
and centralized all destroy calls in switchMode() via a moduleDestroyMap
that cleanly tears down only the previous mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Re-implements envelope detection on top of the rewritten Morse decoder.
Addresses PR #160 review feedback:
- Rebase: rebuilt on current upstream/main (lifecycle state machine)
- Gap thresholds: 2.0/5.0 for envelope only; goertzel keeps 2.6/6.0
- Frequency validation: max_mhz=1766 for envelope, 30 for goertzel
- Tests: EnvelopeDetector unit tests + envelope-mode decoder test
- Envelope uses direct magnitude threshold (no SNR/noise ref)
- Goertzel path completely unchanged
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Integrate radiosonde_auto_rx for automatic weather balloon detection and
decoding on 400-406 MHz. Includes UDP telemetry parsing, Leaflet map with
altitude-colored markers and trajectory tracks, SDR device registry
integration, setup script installation, and Docker support.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The globe wasn't rendering because initGlobe() used setTimeout(100)
which can race with the display:none removal by switchMode(). Both
GPS and WebSDR modes use requestAnimationFrame to wait for the browser
to compute layout before initializing Globe.gl.
- Replace setTimeout with RAF-based retry loop (up to 8 frames)
- Add try-catch around Globe() init with fallback message
- Match the proven pattern from GPS and WebSDR modes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix globe destroyed on re-render by preserving canvas DOM node across
renderLocationCard() calls instead of recreating from scratch
- Reduce globe.gl camera minDistance (180->120) so globe is visible in
200px container
- Clear stale globeInstance ref when canvas is gone
- Enlarge CPU gauge (90->110px), percentage label (18->22px), core bars
(24->48px height), and detail text (11->12px)
- JS fetchLocation() now supplements server response with client-side
ObserverLocation.getShared() from localStorage when server returns
'default' or 'none', picking up manual coordinates from settings modal
- Location priority: GPS > config env vars > manual (localStorage) > default
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add third location fallback to utils/constants (London 51.5074/-0.1278)
so location always resolves even without GPS or env vars configured
- Remove min-height from sys-card to eliminate wasted space
- Switch System Info to vertical key-value layout filling the card
- Clean up OS string (strip glibc suffix), use locale date for boot time
- Bump info grid font size from 11px to 12px for readability
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace broken app.gps_state lookup with utils.gps.get_current_position()
and return GPS metadata (fix quality, satellites, accuracy). Shrink location
card to single-column with 200px globe, move System Info into row 2.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add SVG arc gauge, per-core CPU bars, temperature sparkline, network
interface monitoring with bandwidth deltas, disk I/O rates, 3D globe
with observer location, weather overlay, battery/fan/throttle support,
and process grid layout. New /system/location and /system/weather endpoints.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Real-time dashboard for host metrics (CPU, memory, disk, temperatures),
active decoder process status, and SDR device enumeration via SSE streaming.
Auto-connects when entering the mode with graceful psutil fallback.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The satellite dropdown had no change listener, so selecting a different
satellite never updated the pass list, timeline, countdown, or polar plot.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When the stop POST timed out (5s), lifecycle was set to 'idle' on error,
allowing checkStatus to see running=true and reconnect SSE. Now:
- stop .then() stays in 'stopping' on timeout/error instead of going idle
- checkStatus skips reconnect when lifecycle is 'stopping' post-timeout
but still transitions to idle when server confirms running=false
- LOCAL_STOP_TIMEOUT_MS raised from 5s to 12s to match server cleanup time
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The previous stopPromise guard only prevented new polls from being
dispatched. Polls already in-flight before stop was clicked could still
return with running=true and override the stopping lifecycle, causing
SSE reconnection and an apparent restart loop. Add a second guard in
the .then() handler to check stopPromise/lifecycle before acting.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Guard checkStatus() against in-flight stop to prevent status poller
from overriding stopping state and reconnecting SSE. Lower SNR floor
from 1.3 to 1.15 to accommodate weaker CW signals. Add SNR/noise_ref
to scope events and metrics for real-time threshold debugging.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Widen noise detector offset from ±100Hz to ±200Hz to reduce spectral
leakage into the noise reference, and scale threshold_multiplier for
SNR space (2.8 → 1.54) so real CW signals reliably trigger tone
detection instead of producing all-E's at 60 WPM.
Fix misleading "decoder startup" timeout message on stop requests and
increase stop timeout from 2.2s to 5s.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
