- Fix SDR device stuck claimed on capture failure via on_complete callback
- Improve SatDump output parsing to emit all lines (throttled 2s) for real-time feedback
- Extract shared pass prediction into utils/weather_sat_predict.py with trajectory/ground track support
- Add auto-scheduler (utils/weather_sat_scheduler.py) using threading.Timer for unattended captures
- Add scheduler API endpoints (enable/disable/status/passes/skip) with SSE event notifications
- Add countdown timer (D/H/M/S) with imminent/active glow states
- Add 24h timeline bar with colored pass markers and current-time cursor
- Add canvas polar plot showing az/el trajectory arc with cardinal directions
- Add Leaflet ground track map with satellite path and observer marker
- Restructure to 3-column layout (passes | polar+map | gallery) with responsive stacking
- Add auto-schedule toggle in strip bar and sidebar
- Add rtlamr (Go utility meter decoder) to Dockerfile
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The sweep loop's WiFi/BT/RF scan processing had unprotected
timeline_manager.add_observation() calls that could crash an entire
scan iteration, silently preventing all device events from reaching
the frontend. Additionally, scan interval timestamps were only updated
at the end of processing, causing tight retry loops on persistent errors.
- Wrap timeline observation calls in try/except for all three protocols
- Move last_*_scan timestamp updates immediately after scan completes
- Add per-device try/except so one bad device doesn't block others
- Emit sweep_progress after WiFi scan for real-time status visibility
- Log warning when WiFi scan returns 0 networks for easier diagnosis
- Add known_device and score_modifier fields to correlation engine
- Add TSCM scheduling, cases, known devices, and advanced WiFi indicators
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The innerHTML rebuild on every SSE event was destroying and recreating
DOM elements under the cursor, causing rapid mouseenter/mouseleave
cycling. Now defers DOM rebuilds while hovering and debounces rapid
update calls with a 200ms window.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Separate SVG translate positioning from CSS hover scale by nesting
device elements in two groups, preventing the CSS transform from
overriding the position and causing rapid mouseenter/mouseleave cycling.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add help modal system with keyboard shortcuts reference
- Add Main Dashboard button in navigation bar
- Make settings modal accessible from all dashboards
- Dashboard CSS improvements and consistency fixes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Display connected clients for access points in detail drawer
- Real-time client updates via SSE streaming
- Client cards show MAC, vendor, RSSI, probed SSIDs, and last seen
- Count badge in Connected Clients header
Other changes:
- Updated aircraft database
- CSS and template refinements
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Issues fixed:
- #113: Display RTL-SDR serial numbers in device selector
- #112: Kill all processes now stops Bluetooth scans
- #111: BLE device list no longer overflows container bounds
- #109: WiFi scanner panels maintain minimum width (no more "imploding")
- #108: Radar device hover no longer causes violent shaking
- #106: "Use GPS" button now uses gpsd for USB GPS devices
- #105: Meter trend text no longer overlaps adjacent columns
- #104: dump1090 errors now provide specific troubleshooting guidance
Changes:
- app.py: Add Bluetooth cleanup to /killall endpoint
- routes/adsb.py: Parse dump1090 stderr for specific error messages
- templates/index.html: Show SDR serial numbers in device dropdown
- static/css/index.css: Fix WiFi/BT panel layouts with proper min-width
- static/css/components/signal-cards.css: Fix meter grid overflow
- static/css/components/proximity-viz.css: Fix radar hover transform
- static/css/settings.css: Add GPS detection spinner
- static/js/components/proximity-radar.js: Add invisible hit areas
- static/js/core/settings-manager.js: Use gpsd before browser geolocation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Pass connection_type to updateConnectionUI() in checkStatus() so TCP
connections display correctly after browser refresh instead of defaulting
to Serial.
Fixes#98
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When switching between agents in the UI, only stop the UI polling -
don't send a stop command to the agent. Agent scans should continue
running independently. When switching back, checkScanStatus() will
detect the running scan and resume polling.
Agent returns scan_type 'deepscan' but UI expected 'deep', causing the
polling to immediately stop when checking scan status on agent switch.
Now normalizes 'deepscan' to 'deep' in checkScanStatus.
Agent fixes:
- Fix Ctrl+C hang by running cleanup in background thread
- Add force-exit on double Ctrl+C
- Improve exception handling in output reader threads to prevent
bad file descriptor errors on shutdown
- Reduce cleanup timeouts for faster shutdown
Controller/UI fixes:
- Add URL validation for agent registration (check port, protocol)
- Show helpful message when agent is unreachable during registration
- Clarify API key field label (reserved for future use)
- Add client-side URL validation with user-friendly error messages
WiFi agent mode fixes:
- Add polling fallback for deep scan when push mode is disabled
- Polls /controller/agents/{id}/wifi/data every 2 seconds
- Detect running scans when switching to an agent
- Fix scan_mode detection (agent uses params.scan_type)
Allow connecting to WiFi-enabled Meshtastic devices via TCP/IP in
addition to USB/Serial connections. This enables remote monitoring
of mesh nodes that have WiFi capability (T-Beam, Heltec WiFi LoRa, etc).
- Add connection_type parameter ('serial' or 'tcp') to /meshtastic/start
- Add hostname parameter for TCP connections
- Update UI with connection type dropdown and hostname input field
- Show connection type in status responses
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add DopplerTracker class using skyfield for satellite tracking
- Calculate and apply Doppler shift correction (up to ±3.5 kHz at 145.800 MHz)
- Background thread monitors shift and retunes rtl_fm when >500 Hz drift
- New /sstv/doppler endpoint for real-time Doppler info
- Start endpoint accepts latitude/longitude for automatic tracking
Also:
- Add slowrx installation to setup.sh (source build for macOS, apt for Debian)
- Sync observer location to dashboard-specific localStorage keys
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add ISS SSTV decoder mode with real-time tracking globe
- Add GitHub update notifications for new releases
- Enhance Meshtastic with QR codes and telemetry display
- Add new Space category for satellite modes
- Fix SoapySDR detection, dump1090 builds, and Flask compatibility
- Update version numbers and changelog
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add new "Space" category with Satellite and ISS SSTV modes
- Rename "Scanner" to "Listening Post"
- SSTV now uses global SDR device selector
- Meshtastic map markers more visible (stronger glow, larger size)
- CSS layout fixes using flex instead of fixed heights
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use real Leaflet map with proper tile layers (same as satellite section)
- ISS marker with pulsing glow animation
- Ground track orbit line showing ISS path
- Map auto-pans to follow ISS position
- Simplified overlay showing position and next pass info
- Responsive layout that adapts to screen size
- Removed custom canvas rendering and continent data
The Leaflet map uses the same tile provider as other sections,
ensuring the ISS position is accurately displayed on a real map.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use simple equirectangular projection for guaranteed accuracy
- Direct linear mapping: lon to x, lat to y (no complex 3D math)
- Show ISS ground track orbit path
- Continent outlines rendered on flat map
- Canvas changed to 300x150 for proper 2:1 aspect ratio
- Updated CSS for rectangular map styling
The 2D map uses a straightforward coordinate transformation
that cannot produce incorrect positions.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix x-axis mirroring for proper globe viewing orientation
- Adjust rotation formula to use lon - rotation instead of lon + rotation
- Globe now correctly shows landmasses relative to ISS position
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use actual ISS coordinates with globe rotation instead of fixed lon=0
- Fix orbit trail to use actual longitude offsets from ISS position
- Trail now properly follows behind ISS based on orbital path
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Mitch Ross