- Make stopAprs() async and await backend stop completion before
re-enabling the Start button, preventing race where a late stop
request kills newly started processes
- Add cache-buster param to EventSource URL to prevent browser
SSE connection reuse between stop/start cycles
- Capture aprs_active_device locally in stream_aprs_output so the
old thread's finally block doesn't release a device claimed by
a new session
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace hardcoded rtl_fm with SDRFactory abstraction layer so WeFax works
with any supported SDR hardware, matching the pattern used by APRS and
other modes. RTL-SDR direct sampling flag preserved for HF reception.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The default 1 MHz sample rate was too low for SatDump's meteor_m2-x_lrpt
pipeline, causing NOSYNC and 0.000dB SNR. Bumped to 2.4 MHz (SatDump
recommendation) and wired up the WEATHER_SAT_SAMPLE_RATE config value
so it actually gets passed to decoder.start() from both the auto-scheduler
and manual start route.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix silent failure when starting without station/frequency selected by
flashing amber on status text and dropdowns. Add auto-capture scheduler
that uses fixed UTC broadcast schedules from station data to
automatically start/stop WeFax decoding at broadcast times.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Implement HF radiofax decoding with custom Python DSP pipeline
(rtl_fm USB → Goertzel/Hilbert demodulation), 33-station database
with broadcast schedules, audio waveform scope, live image preview,
and decoded image gallery. Amber/gold UI theme for HF distinction.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The shared audio queue (maxsize reduced from 80 to 20) was not flushed
when the monitor frequency changed — only when the monitor was disabled.
This caused up to 4 seconds of stale old-frequency audio to play after
clicking to tune, making click-to-tune appear non-functional.
Now flushes the queue whenever the VFO frequency changes, so audio at
the new frequency begins within ~50ms (one FFT frame).
Two root causes for the waterfall/monitor lockup when scrolling past the
2.4 MHz RTL-SDR span:
1. safe_terminate() sent SIGKILL but never called wait(), leaving a
zombie process that kept the USB device handle open. The subsequent
capture restart failed the USB probe and the monitor could not use
the shared IQ path, falling back to a process-based monitor that
stole the SDR from the waterfall.
2. When the frontend created a new WebSocket after a failure, the old
handler's finally block called _set_shared_capture_state(running=False)
which could race with the new handler's running=True, making the
shared monitor path unavailable. Added a generation counter so only
the owning handler can clear the shared state.
When restarting capture for a new frequency, the USB handle from the
just-killed process may not be released by the kernel in time for the
rtl_test probe inside claim_sdr_device. Add retry logic (up to 4
attempts with 0.4s backoff) matching the pattern already used by the
audio start endpoint.
Also clean up stale shared-monitor state in the frontend error handler
so the monitor button is not left disabled when the capture restart
fails.
- _waitForPlayback now only succeeds on playing/timeupdate events, not
loadeddata/canplay which fire from just the WAV header before real
audio arrives
- stopMonitor() pauses audio and updates UI immediately instead of
blocking on the backend stop request (1+ second delay)
- Reduced backend audio stop sleep from 1.0s to 0.15s; the start
retry loop already handles USB contention
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When dashboards (satellite, ADS-B, AIS) are loaded via iframe with
?embedded=true, the full navigation bar was still rendered, creating
a "UI in UI" effect. Pass the embedded query param from route handlers
to templates and conditionally skip the nav include.
Fixes#144
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The previous fix (bf8b308) introduced a regression: when VIS parity
check failed or the VIS code was unrecognized, the detector entered
DETECTED state permanently and never resumed scanning. Now it resets
to IDLE on validation failure and only enters DETECTED on success.
Also resets partial image progress counter between consecutive decodes
and adds SDR device claiming to general SSTV route to prevent conflicts.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New mode providing real-time space weather data from NOAA SWPC, NASA SDO,
and HamQSL APIs. Includes Kp index, solar wind, X-ray flux charts, HF band
conditions, D-RAP absorption maps, aurora forecast, solar imagery, flare
probability, and active solar regions. No SDR hardware required.
Bumps version to 2.20.0. Updates all documentation including README, FEATURES,
USAGE, UI_GUIDE, help modal, and GitHub Pages site.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Update default ACARS frequencies for North America to 131.725/131.825 MHz and add ISS (145.825 MHz) as a selectable APRS frequency region.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The analytics summary, health, and export were only reading from legacy
DataStores (app_module.wifi_networks, bt_devices) which the v2 WiFi and
Bluetooth scanners don't populate. Now checks v2 scanner singletons
first and falls back to legacy stores.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a unified analytics mode under the Security nav group that aggregates
data across all signal modes. Includes emergency squawk alerting (7700/7600/7500),
vertical rate anomaly detection, ACARS/VDL2-to-ADS-B flight correlation,
geofence zones with enter/exit detection for aircraft/vessels/APRS stations,
temporal pattern detection, RSSI history tracking, Meshtastic topology mapping,
and JSON/CSV data export.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
dumpvdl2 2.6.0 requires the complete output specifier format
'decoded:json:file:path=-' instead of just 'decoded:json'.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add VDL2 (VHF Digital Link Mode 2) decoding via dumpvdl2 as a new mode,
and promote ACARS from ADS-B-dashboard-only to a first-class standalone
mode in the main SPA. Both aviation datalink modes now have full nav
entries, sidebar partials with region-based frequency selectors, and
SSE streaming. VDL2 also integrated into the ADS-B dashboard as a
collapsible sidebar alongside ACARS.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Smittix