When the backend has an active DMR session but the frontend lost track
(page refresh, broken flags causing silent running), clicking Start
returned 409 with no recovery path. Now the frontend resyncs on
"Already running" responses and checks backend status on tab activation.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix infinite loop in updateAprsStationList: querySelectorAll returns a
static NodeList so the while(cards.length > 50) loop never terminated,
crashing the page. Use live childElementCount instead.
- Fix station list pushing map off-screen by adding overflow:hidden and
min-height:0 to flex containers so only the station list scrolls.
- Cap backend aprs_stations dict at 500 entries with oldest-eviction to
prevent unbounded memory growth.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Remove all GSM cellular intelligence features including tower scanning,
signal monitoring, rogue detection, crowd density analysis, and
OpenCellID integration across routes, templates, utils, tests, and
build configuration.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The function-strip CSS was never linked in index.html, causing all
strip items to render as unstyled stacked elements instead of a
horizontal flex bar.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move waterfall controls from the sidebar into a function-strip bar inside
#listeningPostVisuals so they sit directly above the waterfall canvas.
Also fix the "SDR device in use" error when clicking a waterfall frequency
to listen — the WebSocket waterfall's device claim wasn't being released
before the audio start request because the backend cleanup hadn't finished.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace the batch rtl_power SSE pipeline with continuous I/Q streaming
via WebSocket for smooth ~25fps waterfall display. The server captures
raw I/Q samples (rtl_sdr/rx_sdr), computes Hann-windowed FFT, and
sends compact binary frames (1035 bytes vs ~15KB JSON, 93% reduction).
Client falls back to existing SSE path if WebSocket is unavailable.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Waterfall clicks now auto-select the correct modulation for the frequency
band (e.g., WFM for FM broadcast, AM for airband) instead of using whatever
modulation was last selected. Adds a hover tooltip showing frequency and
suggested modulation. Fixes the kill-all notification to show a clean
"All processes stopped" message instead of listing "bluetooth_scanner".
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a phosphor-persistence waveform scope showing audio RMS/peak
levels during ISS SSTV and General SSTV decoding, matching the
existing pager scope pattern with a purple color scheme.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Enable -M level on rtl_433 to include RSSI/SNR in decoded JSON, extract
signal levels and push scope events to the SSE stream. Renders a green-
themed canvas oscilloscope showing signal strength pulses on packet decode
with amber SNR indicator and decay between packets.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Tap the rtl_fm → multimon-ng audio pipeline via a relay thread to extract
RMS/peak amplitude levels and render a 60fps canvas oscilloscope during
pager decoding, giving visual feedback of RF activity before messages are
fully decoded.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Reverts IQ pipeline and removes syncWaterfallToFrequency calls from
pager, sensor, rtlamr, DMR, SSTV, and SSTV general modes. Waterfall
is now exclusive to listening post mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The dmrRawOutput div was rendering garbled box-drawing characters from
the dsd-fme ASCII art banner below the signal activity canvas. Remove
the div and filter banner lines (box-drawing chars, version info) in
the parser so they never become events.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The DSD stderr parser had regex ordering bugs that swallowed voice and
call events as bare slot events, and only matched classic dsd output
format (not dsd-fme). Unmatched lines were silently dropped, leaving
the signal activity panel with nothing to display.
- Reorder regex checks: TG/Src before voice before slot
- Support dsd-fme comma-separated format (TG: x, Src: y)
- Make bare slot regex strict (only standalone "Slot N" lines)
- Forward unmatched DSD lines as raw events for diagnostics
- Add LISTENING state to signal activity panel for raw output
- Show raw decoder output text below synthesizer canvas
- Fix test mocks for find_dsd() tuple return value
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Users can now manage decoded SSTV images with download and delete actions
accessible from hover overlays on gallery cards, the full-size image modal
toolbar, and a "Clear All" button in the gallery header. Both ISS and
General SSTV modes are supported.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
slowrx is a GTK GUI app that doesn't support CLI usage, so the SSTV
decoder was silently failing. This replaces it with a pure Python
implementation using numpy and Pillow that supports Robot36/72,
Martin1/2, Scottie1/2, and PD120/180 modes via VIS header auto-detection.
Key implementation details:
- Generalized Goertzel (DTFT) for exact-frequency tone detection
- Vectorized batch Goertzel for real-time pixel decoding performance
- Overlapping analysis windows for short-window frequency estimation
- VIS header detection state machine with parity validation
- Per-line sync re-synchronization for drift tolerance
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Event-driven spring-physics bar visualization reacting to SSE events
(sync/call/voice) with HSL color coding and center-outward ripple effects.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a general-purpose SSTV decoder alongside the existing ISS SSTV mode,
supporting USB/LSB/FM modulation on common amateur radio HF/VHF/UHF
frequencies (14.230 MHz USB, 3.845 MHz LSB, etc.) with auto-detection
of modulation from preset frequency table.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add defensive typeof checks before referencing the Updater global in
loadUpdateStatus() and checkForUpdatesManual() so the settings panel
shows a helpful message instead of crashing. Also swap script load
order so updater.js loads before settings-manager.js.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use networksetup instead of deprecated airport utility for macOS WiFi detection
- Fix SDRDevice attribute access (use getattr instead of dict .get())
- Move Detected Threats panel next to RF Signals in 2-column grid
- Always run correlation/identity analysis at sweep end, even if stopped by user
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The sweep loop's WiFi/BT/RF scan processing had unprotected
timeline_manager.add_observation() calls that could crash an entire
scan iteration, silently preventing all device events from reaching
the frontend. Additionally, scan interval timestamps were only updated
at the end of processing, causing tight retry loops on persistent errors.
- Wrap timeline observation calls in try/except for all three protocols
- Move last_*_scan timestamp updates immediately after scan completes
- Add per-device try/except so one bad device doesn't block others
- Emit sweep_progress after WiFi scan for real-time status visibility
- Log warning when WiFi scan returns 0 networks for easier diagnosis
- Add known_device and score_modifier fields to correlation engine
- Add TSCM scheduling, cases, known devices, and advanced WiFi indicators
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add help modal system with keyboard shortcuts reference
- Add Main Dashboard button in navigation bar
- Make settings modal accessible from all dashboards
- Dashboard CSS improvements and consistency fixes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Display connected clients for access points in detail drawer
- Real-time client updates via SSE streaming
- Client cards show MAC, vendor, RSSI, probed SSIDs, and last seen
- Count badge in Connected Clients header
Other changes:
- Updated aircraft database
- CSS and template refinements
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Issues fixed:
- #113: Display RTL-SDR serial numbers in device selector
- #112: Kill all processes now stops Bluetooth scans
- #111: BLE device list no longer overflows container bounds
- #109: WiFi scanner panels maintain minimum width (no more "imploding")
- #108: Radar device hover no longer causes violent shaking
- #106: "Use GPS" button now uses gpsd for USB GPS devices
- #105: Meter trend text no longer overlaps adjacent columns
- #104: dump1090 errors now provide specific troubleshooting guidance
Changes:
- app.py: Add Bluetooth cleanup to /killall endpoint
- routes/adsb.py: Parse dump1090 stderr for specific error messages
- templates/index.html: Show SDR serial numbers in device dropdown
- static/css/index.css: Fix WiFi/BT panel layouts with proper min-width
- static/css/components/signal-cards.css: Fix meter grid overflow
- static/css/components/proximity-viz.css: Fix radar hover transform
- static/css/settings.css: Add GPS detection spinner
- static/js/components/proximity-radar.js: Add invisible hit areas
- static/js/core/settings-manager.js: Use gpsd before browser geolocation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add /devices/status endpoint showing which SDR is in use and by what mode
- Add real-time status panel on main dashboard with 5s auto-refresh
- Add Bias-T toggle to ADS-B dashboard with localStorage persistence
- Auto-detect correct dump1090 bias-t flag (--enable-biast vs unsupported)
- Standardize SDR device labels across all pages
Closes#102
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Initialize currentDeviceList from server-provided deviceList on page load
and auto-select the correct hardware type dropdown value. Previously the
device list was empty until "Refresh Devices" was clicked, causing the
hardware type dropdown to show incorrect values.
Fixes#99
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When refreshing agent WiFi interfaces, check if any interface has
type='monitor' and automatically set the monitor status to Active.
Previously the UI only showed Active when monitor was explicitly
enabled via the button.
Agent fixes:
- Fix Ctrl+C hang by running cleanup in background thread
- Add force-exit on double Ctrl+C
- Improve exception handling in output reader threads to prevent
bad file descriptor errors on shutdown
- Reduce cleanup timeouts for faster shutdown
Controller/UI fixes:
- Add URL validation for agent registration (check port, protocol)
- Show helpful message when agent is unreachable during registration
- Clarify API key field label (reserved for future use)
- Add client-side URL validation with user-friendly error messages
WiFi agent mode fixes:
- Add polling fallback for deep scan when push mode is disabled
- Polls /controller/agents/{id}/wifi/data every 2 seconds
- Detect running scans when switching to an agent
- Fix scan_mode detection (agent uses params.scan_type)
Allow connecting to WiFi-enabled Meshtastic devices via TCP/IP in
addition to USB/Serial connections. This enables remote monitoring
of mesh nodes that have WiFi capability (T-Beam, Heltec WiFi LoRa, etc).
- Add connection_type parameter ('serial' or 'tcp') to /meshtastic/start
- Add hostname parameter for TCP connections
- Update UI with connection type dropdown and hostname input field
- Show connection type in status responses
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
