Switch from CartoDB dark tiles to standard OpenStreetMap tiles
which show roads and more detail for tracking APRS stations.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add GPS indicator to APRS function bar
- Add user location marker on APRS map (yellow dot)
- Calculate and display distance to APRS stations in miles
- Show distance in station list and marker popups
- Center map on GPS location when available
- Update distances dynamically as GPS position changes
Uses same gpsd auto-connect mechanism as ADS-B section.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Move SDR configuration controls from sidebar to a horizontal function bar
above the map display for better visibility and accessibility. The bar
includes frequency/station/packet stats, region and gain controls, tool
status indicators, and start/stop buttons.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add spectrum monitoring via rtl_power with configurable presets
- Add OpenCelliD tower integration with Leaflet map display
- Add grgsm_scanner integration for passive GSM cell detection (alpha)
- Add rules engine for anomaly detection and findings
- Add baseline recording and comparison system
- Add setup.sh support for gr-gsm installation on Debian/Ubuntu
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add European airband 8.33 kHz channel spacing to the step selector
in the main listening post interface.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Backend changes (routes/aprs.py):
- Remove -q h flag from direwolf to enable audio level output
- Add parse_audio_level() to extract levels from direwolf output
- Add rate-limiting (max 10 updates/sec, min 2-level change)
- Push meter events to SSE queue as type='meter'
Frontend changes:
- Add signal meter widget to APRS sidebar
- Horizontal bar gauge with gradient (green->cyan->yellow->red)
- Numeric level display (0-100)
- "BURST" indicator for levels >70
- Status text (weak/moderate/strong signal)
- "No RF activity" state after 5 seconds of silence
- CSS styles in static/css/modes/aprs.css
Also added UK region to dropdown (same freq as Europe: 144.800)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove aircraft.html partial and all aircraft mode JS code
- Navigation buttons now link directly to /adsb/dashboard
- Remove Leaflet MarkerCluster (only used for aircraft)
- Clean up help section aircraft references
- Remove checkAdsbTools function and related code
- Add APRS to mobile navigation bar (was missing)
- Fix CSS that was forcing aircraft visuals to always display
- Only apply flex layout to visuals when they are actually visible
- Fix ADS-B dashboard mobile layout with proper flex ordering
- Reset grid properties on mobile for proper stacking
- Hide ACARS sidebar on mobile (desktop only feature)
- Add comprehensive mobile CSS for viewport scrolling and layout stacking
- Fix Leaflet maps not rendering by adding explicit heights and invalidateSize() calls
- Add touch-friendly controls and proper touch-action for maps
- Simplify header on mobile, hide stats and reduce sizes
- Handle orientation changes and window resize for maps
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Save Report button next to Print button
- Downloads report as HTML file with date-stamped filename
- Style both buttons consistently with flex container
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Generate Report button to TSCM sidebar (appears after sweep)
- Implement generateTscmReport() function that creates professional HTML report
- Report includes: executive summary, device tables by risk level,
indicators, recommendations, and disclaimers
- Track sweep start/end times for duration calculation
- Fix script tag escaping in template literal to prevent parsing issues
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Extract inline CSS to static/css/modes/ (acars, aprs, tscm)
- Create HTML partials for all 9 modes in templates/partials/modes/
- Reduce index.html from 11,862 to 10,281 lines (~15% reduction)
- Use Jinja2 includes for cleaner template organization
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Prevents pager and 433MHz sensor data from appearing in the TSCM
section, which has its own dedicated dashboard panels.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add responsive.css with shared utilities (hamburger menu, touch targets, responsive typography)
- Add hamburger menu and mobile drawer navigation to main app
- Add horizontal scrolling mobile nav bar for mode switching
- Refactor index.css with mobile-first breakpoints
- Update adsb_dashboard.css for mobile layouts
- Update satellite_dashboard.css for mobile layouts
- Add mobile nav controller to app.js with drawer toggle
- Hide stats/taglines on small screens
- Unified breakpoints: 480px (phone), 768px (tablet), 1024px (desktop)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Replace simple splash screen with comprehensive welcome page
- Show version number and latest changelog entries
- Add 9-button mode selection grid for direct navigation
- User can now choose which mode to start with
- Responsive layout adapts to mobile screens
- Flow: Welcome → Disclaimer (if needed) → Selected mode
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Convert flat mode nav buttons into dropdown menus by category (SDR/RF, Wireless, Security)
- Add CSS styles for dropdown animations and active state highlighting
- Fix baseline recording by feeding device data to recorder endpoints
- Remove redundant threat summary section from TSCM sidebar
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix bias-t option in rtl_433 for RTL-SDR and HackRF:
- rtl_433's -T flag is for timeout, not bias-t
- RTL-SDR: Use :biast=1 suffix on device string
- HackRF: Use bias_t=1 in SoapySDR device string
- Add "Listen (FM/AM)" buttons to TSCM RF signal details
- Switches to Listening Post mode and tunes to frequency
- Fix device detail header padding to prevent protocol badge
overlapping with close button
- Add circular background to close button
- Use visible border and solid background color
- Increase z-index to ensure it's above content
- Add hover effect with red background
- Better positioning and sizing
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add startup check in app.py for root/sudo privileges
- Show warning in terminal if not running as root
- Add running_as_root flag to TSCM devices API response
- Display privilege warning in TSCM UI when not running as root
- Show command to run with sudo in the warning
- Add CSS styling for privilege warning banner
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove requirement for sdr_device to be set before RF scanning
- Add RTL-SDR device detection check with rtl_test before scanning
- Lower signal detection threshold from -50dBm to -70dBm
- Lower noise floor threshold from 15dB to 10dB above noise
- Add rf_status event for frontend feedback when RF unavailable
- Show status message in RF panel explaining why scanning isn't working
- Add CSS styling for status messages
- Reset RF status message when sweep starts
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix transparent modal background: use --bg-card instead of undefined --panel-bg
- Add box-shadow to modal for better visibility
- Fix reason text color: use --text-secondary instead of hard-to-read --text-muted
- Fix device details section headings and table labels
- Fix indicator tags, disclaimer text, and reasons list colors
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Score cards (High Interest, Needs Review, etc.) are now clickable
- Clicking a card shows all devices in that category in a modal
- Can click through to see individual device details
- Correlations card shows cross-protocol matches
Fixes:
- Findings panel now shows devices with score >= 3 (was 6)
- Panel items color-coded by score (critical/high/medium)
- Sorted by score descending
- Fixed empty state message
UI:
- Added hover effects on clickable cards
- Added CSS for category device list
- Added protocol badges and mini indicators
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Click any device to see detailed breakdown of why it was scored
- Modal shows score circle, risk level, recommended action
- Lists all indicators that contributed to the score
- Shows device-specific information (MAC, RSSI, etc.)
- Includes disclaimer about findings
Fixes:
- Score cards (High Interest, Needs Review, etc.) now update in real-time
- High-interest devices (score 6+) populate the Detected Threats panel
- Added updateTscmThreatCounts() calls when devices are added
UI:
- Device items now have cursor:pointer to indicate clickability
- Added CSS for modal, score circle, indicator list, etc.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
WiFi Scanning:
- Add 'iw' scan method as primary (sometimes works without root)
- Auto-detect wireless interface from /sys/class/net
- Better error logging for permission issues
- Fall back to iwlist if iw fails
UI Updates:
- Replace Critical/High/Medium/Low cards with new scoring model
- Now shows: High Interest (6+), Needs Review (3-5), Informational (0-2)
- Add Correlations count card
- Update counts based on device classification scores
Tracker Detection:
- Add detection for Apple AirTag (by OUI and name)
- Add detection for Tile trackers
- Add detection for Samsung SmartTag
- Add detection for ESP32/ESP8266 devices (Espressif chipset)
- Add generic chipset vendor detection
- New indicator types with appropriate scoring weights
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The bt_device event was including 'type': device.get('type') which
overwrote the SSE event type 'bt_device' with 'ble', causing the
frontend to not recognize the events.
- Rename device type field from 'type' to 'device_type' in bt_device events
- Update frontend to use device_type for display
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Classification levels:
- Green (Informational): Known devices in baseline, expected infrastructure
- Yellow (Needs Review): Unknown BLE devices, new WiFi APs, unidentified RF
- Red (High Interest): Persistent transmitters, audio-capable BLE, trackers,
devices with repeat detections across scans
Features:
- Device history tracking for repeat detection (24-hour window)
- Audio-capable BLE detection (headphones, mics, speakers)
- Classification reasons shown under each device
- Color-coded indicators with visual styling
- Microphone badge for audio-capable BLE devices
- Emit wifi_device, bt_device, rf_signal events as devices are found
- Add frontend handlers to populate device lists in real-time
- Add RF Signals panel to TSCM dashboard
- Dashboard now updates during sweep, not just at the end
- Add _scan_rf_signals() function using rtl_power to scan:
- FM broadcast band (88-108 MHz) for potential bugs
- 315/433/868/915 MHz ISM bands
- 1.2 GHz video transmitter band
- 2.4 GHz ISM band
- Integrate RF scanning into sweep with 60-second interval
- Add display_name field for all devices with friendly names
- Update frontend to use display_name in dropdowns
- Improve scan status display: '14 WiFi | 20 BT | 3 RF' instead of '14w 20b'
- Auto-select first SDR device when available
- Add /tscm/devices endpoint to list available WiFi interfaces,
Bluetooth adapters, and SDR devices
- Add _scan_wifi_networks() for actual WiFi scanning (macOS/Linux)
- Add _scan_bluetooth_devices() for actual Bluetooth scanning
- Update _run_sweep() to perform real scans with selected interfaces
- Add severity_counts tracking in progress events
- Fix frontend to correctly access device and severity data
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Restore APRS dynamic device selection and status bar
- Add ACARS status indicator with listening/receiving states
- Fix acars.py: use -o 4 for JSON, correct command order, add macOS pty fix
- Unify all start buttons (green) and stop buttons (red) across app
- Update help documentation with all modes (APRS, ACARS, Listening Post, TSCM)
- Add TSCM Alpha badge to sidebar
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Changed layout from stacked to inline using flexbox
- MHz now appears beside the frequency number (118.000 MHz)
- Uses align-items: baseline for proper text alignment
- Modulation badge (AM/FM) remains below on its own row
- Increased MHz font size slightly for better visibility
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
APRS Layout:
- Redesigned visualization panel with flexbox layout
- Map panel now takes 2/3 width with station list on right (1/3)
- Station list has proper min/max width (280-350px)
- Packet log at bottom with max height
- Better use of space for all screen sizes
Satellite Features:
- Restored satellite modal (was missing HTML, only JS existed)
- Add Satellite (TLE) button for manual TLE input
- Update from Celestrak button with category selection
- Categories: Space Stations, Weather, NOAA, GOES, Amateur,
CubeSats, Starlink, OneWeb, Iridium NEXT, Visual, Geo, Resources
- Tracked satellites list in sidebar
- Modal tabs for TLE input vs Celestrak fetch
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Create routes/aprs.py with start/stop/stream endpoints for APRS decoding
- Support multiple regional frequencies (North America, Europe, Australia, etc.)
- Use direwolf (preferred) or multimon-ng as AFSK1200 decoder
- Parse APRS packets for position, weather, messages, and telemetry
- Add APRS visualization panel with Leaflet map and station tracking
- Include station list with callsigns, distance, and last heard time
- Add packet log with raw APRS data display
- Register APRS blueprint and add global state management
- Add direwolf and multimon-ng to dependency definitions
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix multimon-ng GitHub URL typo (EliasOewornal -> EliasOenal)
- Fix acarsdec install info (not in apt repos, must build from source)
- Add hcxdumptool to quick install command
- Add note about acarsdec requiring source build with link to setup.sh
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The parent container has overflow:auto which clipped the absolutely
positioned button. Changed to simple flexbox approach where:
- Button is a normal flex child (always visible)
- Content div collapses to width:0 when collapsed
- Map expands to fill available space via flex
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix checkAcarsTools error by removing orphaned function call
- Change toggle icon from left arrow to right arrow (indicates collapse direction)
- Fix button positioning to use left edge instead of right edge
- Button now correctly appears on left side of ACARS panel (bordering map)
- Both index.html and adsb_dashboard now behave consistently
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
ACARS controls are now in the collapsible sidebar next to the map,
so the redundant section in the left settings panel is no longer needed.
- Remove ACARS Messaging section from aircraft mode settings
- Remove unused JS functions (toggleAcarsPanel, setAcarsRegion, etc.)
- Keep addAcarsToOutput helper used by main sidebar
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Change collapsed width from 32px to 0 so map expands fully
- Position collapse button as absolute overlay on map edge
- Button slides to edge of map when collapsed (right: 100%)
- Content fades out smoothly instead of abrupt hide
- Applied same fix to both adsb_dashboard.css and index.html
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add routes/acars.py with start/stop/stream endpoints for ACARS decoding
- Build acarsdec from source in Dockerfile (not available in Debian slim)
- Add acarsdec installation script to setup.sh for native installs
- Add ACARS to dependency checker in utils/dependencies.py
- Add collapsible ACARS sidebar next to map in aircraft tracking tab
- Add collapsible ACARS panel in ADS-B dashboard with same layout
- Include guidance about needing two SDRs for simultaneous ADS-B + ACARS
- Support regional frequency presets (N.America, Europe, Asia-Pacific)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Rebrand from INTERCEPT to iNTERCEPT
- New logo design with 'i' and signal wave brackets
- Add animated landing page with "See the Invisible" tagline
- Fix tuning dial audio issues with debouncing and restart prevention
- Fix Listening Post scanner with proper signal hit logging
- Update setup script for apt-based Python package installation
- Add Instagram promo video template
- Add full-size logo assets for external use
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Update browser titles and headers across all pages with the new
tagline. Add 'Signal Intelligence Platform' as subtitle.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The LoRa mode was removed because:
- rtl_433 cannot decode actual LoRa (CSS modulation)
- The 433MHz mode already handles ISM band devices
- True LoRa decoding requires specialized tools like gr-lora
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
