Resolved conflict in static/js/modes/weather-satellite.js:
- Kept allPasses state variable and applyPassFilter() for satellite pass filtering
- Kept satellite select dropdown listener for filter feature
- Adopted upstream's optimistic stop() UI pattern for better responsiveness
- Kept optional chaining (pass?.trajectory) since drawPolarPlot can receive null
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Correct modulation parameters (1200 bps, 2100/1300 Hz tones), replace
invented format codes with the six ITU-defined specifiers {102, 112,
114, 116, 120, 123}, accept all valid EOS symbols (117, 122, 127),
add parser validation (format, MMSI, raw field, telecommand range),
and fix truthiness bugs that dropped zero-valued fields.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add synchronous startup verification after Popen() — sleep 0.5s and poll
the process before returning to the caller. If SatDump exits immediately
(missing device, bad args), raise RuntimeError with the actual error
message instead of returning status: 'started'. Keep a shorter (2s) async
backup check for slower failures.
Also fix --source_id handling: omit the flag entirely when no serial number
is found instead of passing "0" which SatDump may reject. Change start()
and start_from_file() to return (bool, str|None) tuples so error messages
propagate through to the HTTP response.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
TSCM RF scan now auto-detects HackRF via SDRFactory and uses
hackrf_sweep as an alternative to rtl_power. Also includes
improvements to listening post, rtlamr, weather satellite,
SubGHz, Meshtastic, SSTV, WeFax, and process monitor modules.
Fixes#154
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New signal mode for decoding Morse code (CW) transmissions via SDR.
Includes route blueprint, utility decoder, frontend UI, and tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace hardcoded "rtl_fm" references in wefax.py with the actual SDR
tool name so error messages correctly show "rx_fm" for non-RTL devices.
Use get_tool_path('rx_fm') in all SoapySDR command builders to match
the pattern already used for rx_sdr.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add pre-flight check for I/Q capture binary before spawning process
- Capture stderr from I/Q process for better error diagnostics
- Sync effective span value back to UI when backend adjusts it
- Use get_tool_path('rx_sdr') in Airspy, HackRF, LimeSDR, and SDRPlay
command builders to support custom install locations
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace hardcoded rtl_fm with SDRFactory abstraction layer so WeFax works
with any supported SDR hardware, matching the pattern used by APRS and
other modes. RTL-SDR direct sampling flag preserved for HF reception.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The default 1 MHz sample rate was too low for SatDump's meteor_m2-x_lrpt
pipeline, causing NOSYNC and 0.000dB SNR. Bumped to 2.4 MHz (SatDump
recommendation) and wired up the WEATHER_SAT_SAMPLE_RATE config value
so it actually gets passed to decoder.start() from both the auto-scheduler
and manual start route.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Timer threads now log on fire and catch all exceptions so scheduled
captures never die silently. Frontend connects SSE when the scheduler
is enabled (not only on manual Start) and polls /wefax/status every 10s
as a fallback so the UI stays in sync with auto-fired captures.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
stop() was returning before the decode thread could save any partial
image to disk, so the frontend loadImages() call found nothing new.
Join the decode thread (2s timeout) before returning — with select()-
based reads the thread exits within ~0.5s so this stays responsive.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Replace blocking stdout.read() with select()-based non-blocking reads
so the decode thread responds to stop within 0.5s
- Make stop() non-blocking by releasing the lock before terminating the
process and removing the redundant wait()
- Move initial scanning SSE event from start() into the decode thread so
it fires after the frontend EventSource connects
- Update frontend stop() to give immediate UI feedback before the fetch
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
rtl_fm subprocess failures (missing tool, no SDR hardware) were silent —
add tool-path check and post-spawn health check in _start_pipeline(),
show errors prominently in the strip status bar (red text + red dot),
and include error detail in scheduler skip events.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix silent failure when starting without station/frequency selected by
flashing amber on status text and dropdowns. Add auto-capture scheduler
that uses fixed UTC broadcast schedules from station data to
automatically start/stop WeFax decoding at broadcast times.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Implement HF radiofax decoding with custom Python DSP pipeline
(rtl_fm USB → Goertzel/Hilbert demodulation), 33-station database
with broadcast schedules, audio waveform scope, live image preview,
and decoded image gallery. Amber/gold UI theme for HF distinction.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Two root causes for the waterfall/monitor lockup when scrolling past the
2.4 MHz RTL-SDR span:
1. safe_terminate() sent SIGKILL but never called wait(), leaving a
zombie process that kept the USB device handle open. The subsequent
capture restart failed the USB probe and the monitor could not use
the shared IQ path, falling back to a process-based monitor that
stole the SDR from the waterfall.
2. When the frontend created a new WebSocket after a failure, the old
handler's finally block called _set_shared_capture_state(running=False)
which could race with the new handler's running=True, making the
shared monitor path unavailable. Added a generation counter so only
the owning handler can clear the shared state.
- Persist ACARS/VDL2 messages across page refresh via new /acars/messages
and /vdl2/messages endpoints backed by FlightCorrelator
- Add clear buttons to ACARS/VDL2 sidebars and right-panel datalink section
with /acars/clear and /vdl2/clear endpoints
- Fix right-panel DATALINK MESSAGES flickering by diffing innerHTML before
updating, with opacity transition for smooth refreshes
- Add aircraft deselect toggle (click selected aircraft again to deselect)
- Enrich VDL2 messages with ACARS label translation (label_description,
message_type, parsed fields) matching existing ACARS translator
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
ACARS messages use IATA codes (e.g. UA2412) while ADS-B uses ICAO
callsigns (e.g. UAL2412). Add a translation layer so the two can
match, enabling click-to-highlight and datalink message correlation.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add ACARS label translation, message classification, and field parsers
so decoded messages show human-readable descriptions instead of raw
label codes (H1, DF, _d, 5Z, etc.). Integrate translated ACARS
messages into the ADS-B aircraft detail panel and add a live message
feed to the standalone ACARS mode.
- New utils/acars_translator.py with ~50 label codes, type classifier,
and parsers for position reports, engine data, weather, and OOOI
- Enrich messages at ingest in routes/acars.py with translation fields
- Backfill translation in /adsb/aircraft/<icao>/messages endpoint
- ADS-B dashboard: DATALINK MESSAGES section in aircraft detail panel
with auto-refresh, color-coded type badges, and parsed field display
- Standalone ACARS mode: scrollable live message feed (max 30 cards)
- Fix default N. America ACARS frequencies to 131.550/130.025/129.125
- Unit tests covering all translator functions
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The slant correction was severely under-correcting because bwd=50 caused
the sync deviation measurements to saturate after only ~25 lines (for a
2-sample/line SDR clock drift). Lines 25-256 all reported deviation=-50,
pulling the linear regression slope toward zero.
Increase bwd and fwd to 800 samples each — sufficient to track cumulative
drift from up to ~±200 ppm SDR clock offset across the full 256-line image.
Also use a full-sync-length (432-sample) Goertzel window instead of 1/3
length, giving ~111 Hz frequency resolution to cleanly separate the 1200 Hz
sync tone from 1500 Hz pixel data. Search is stepped at 5 samples (~0.1 ms)
for efficiency, keeping the goertzel_batch batch size at ~320 windows/line.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Previous attempts to correct slant by altering R-channel placement and
buffer consumption caused cascading failures: a false positive in B pixel
data would misplace R, then the wrong consumed value misaligned the next
line's G, and the error compounded across all 256 lines.
New approach (safe by design):
- Sync search is measurement-only: never touches pos or consumed, so
a noisy or wrong measurement cannot corrupt the current or future lines.
- Per-line deviation (measured sync position minus expected) is recorded
in self._sync_deviations throughout the decode.
- get_image() fits a line through the deviations (linear regression) to
estimate the per-line SDR clock drift rate, then applies a horizontal
shear to the assembled PIL image: each row is shifted by
-round(row × drift_rate × width / channel_samples) pixels.
- Worst case (all measurements fail): no correction applied, image
quality identical to the pre-change baseline.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The step-49 coarse scan introduced up to ±24 sample uncertainty in R
channel placement. When accumulated SDR clock drift pushed the actual
sync 35+ samples early in the search region, the step-49 windows could
land on the B-pixel tail and return position 0, misplacing R by ~50
samples (~16 pixel colour shift) — worse than no correction at all.
Replace with a vectorised goertzel_batch sliding-window scan at step=1
over a short window (sync_duration / 3 ≈ 3 ms), giving single-sample
accuracy. Use consumed=pos (instead of max(pos,line_samples)) when the
sync is found, so the next line starts at its correct separator and
per-line timing errors stop accumulating entirely.
Falls back to the fixed-offset path whenever the sync is not found
(e.g. noisy signal), preserving the pre-change baseline quality.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The previous sync search used search_margin = line_samples/10 (~306
samples for Scottie2), reaching deep into B channel pixel data behind
pos and well past the expected sync end ahead of pos.
When _find_sync returned a position in the late portion of that wide
region, pos + R_channel_samples exceeded the buffer length. The
buffer-too-short guard in _decode_line then returned early without
consuming data or advancing the line counter, causing the stall guard
in feed() to permanently break the decode loop.
Fix: use a 50-sample backward margin (covers >130 ppm SDR drift) and
a forward margin capped to whatever the current buffer can safely
support for the R channel. A final candidate-position check before
committing pos ensures no overflow is possible.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Scottie modes place their horizontal sync pulse between the Blue and Red
channels. The decoder was using a fixed offset to skip over it, so any
SDR clock error accumulated line-by-line and produced a visible diagonal
slant in the decoded image.
Fix: search for the actual 1200 Hz sync pulse in a ±10% window around
the expected position before decoding the Red channel, then align to the
real pulse. This resets accumulated clock drift on every scanline, the
same way Martin and Robot modes already handle their front-of-line sync.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Fix wrong VIS codes for PD90 (96→99), PD120 (93→95), PD180 (95→97),
PD240 (113→96), and ScottieDX (55→76). This caused PD180 to be detected
as PD90 and PD120 to fail entirely.
Replace batch Goertzel pixel decoding with analytic signal (Hilbert
transform) FM demodulation. The Goertzel approach used 96-sample windows
with ~500 Hz resolution — wider than the 800 Hz pixel frequency range —
making accurate pixel decoding impossible for fast modes like Martin2
and Scottie2. The Hilbert method computes per-sample instantaneous
frequency, matching the approach used by QSSTV and other professional
SSTV decoders.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Tolerate intermittent ambiguous windows during leader detection (up to
3 consecutive misses), use energy-based break detection when tone
classification fails at leader-break boundary, and add single-bit VIS
error correction for parity-bit and data-bit corruption on noisy HF.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
VIS detection recognized these modes but ALL_MODES had no decoder specs,
causing silent decode failures on common HF frequencies like 14.230 MHz.
Also emit a user-visible SSE event when an unsupported VIS code is detected.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The previous fix (bf8b308) introduced a regression: when VIS parity
check failed or the VIS code was unrecognized, the detector entered
DETECTED state permanently and never resumed scanning. Now it resets
to IDLE on validation failure and only enters DETECTED on success.
Also resets partial image progress counter between consecutive decodes
and adds SDR device claiming to general SSTV route to prevent conflicts.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
mitchross