Previously currentPos only had lat/lon, so the updateTelemetry fallback
(used before first live position arrives) always showed '---' for
altitude/elevation/azimuth/distance. currentPos now includes all fields
computed from the request observer location. updateTelemetry simplified
to delegate to applyTelemetryPosition.
TLE data was only refreshed once at startup. After each refresh, a new
24-hour timer is now scheduled in a finally block so it fires even on
refresh failure. threading moved to module-level import.
SSE runs server-wide with DEFAULT_LAT/LON defaults of 0,0. Emitting
elevation/azimuth/distance/visible from the tracker produced wrong
values (always visible:False) that overwrote correct data from the
per-client HTTP poll every second.
The HTTP poll (/satellite/position) owns all observer-relative data.
SSE now only emits lat/lon/altitude/groundTrack. Also removes the
unused DEFAULT_LATITUDE/DEFAULT_LONGITUDE import.
- Add immediate keepalive to /adsb/stream generator so the Werkzeug dev
server flushes response headers immediately on tracking start, preventing
the 30-second delay before the aircraft map begins receiving data
- Same fix for /controller/stream/all used by the ADSB dashboard in agent mode
- Widen WebSocket init exception guards in app.py from ImportError to
Exception so any startup failure (e.g. RuntimeError from flask-sock on
an unsupported WSGI server) is caught instead of propagating
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add --no-cache-dir and --timeout 120 to all pip calls to prevent hanging
on corrupt/stale pip HTTP cache (cachecontrol .pyc issue)
- Replace silent python -c import verification with pip show to avoid
import-time side effects hanging the installer
- Switch optional packages to --only-binary :all: to skip source compilation
on Python versions without pre-built wheels (prevents gevent/numpy hangs)
- Warn early when Python 3.13+ is detected that some packages may be skipped
- Add ground track caching with 30-minute TTL to satellite route
- Add live satellite position tracker background thread via SSE fanout
- Add satellite_predict, satellite_telemetry, and satnogs utilities
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Pass DEFAULT_LATITUDE/DEFAULT_LONGITUDE from config to both standalone
dashboard templates so observer-location.js uses .env values instead of
falling back to hardcoded London coordinates on first visit.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The APRS stop endpoint terminated two processes sequentially (up to 4s
with PROCESS_TERMINATE_TIMEOUT=2s each) while the frontend fetch timed
out at 2.2s. This caused console errors and left the SDR device claimed
in the registry until termination finished, making the status panel show
the device as active after the user clicked stop.
Fix: release the SDR device from the registry immediately inside the
lock, clear process references, then terminate processes in a background
thread so the HTTP response returns instantly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix SSE fanout thread AttributeError when source queue is None during
interpreter shutdown by snapshotting to local variable with null guard
- Fix branded "i" logo rendering oversized on first page load (FOUC) by
adding inline width/height to SVG elements across 10 templates
- Bump version to 2.26.0 in config.py, pyproject.toml, and CHANGELOG.md
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
ensureModeScript() used document.body.appendChild() to load lazy mode
scripts, but the preload for ?mode= query params runs in <head> before
<body> exists, causing all deep-linked modes to silently fail.
Also fix cross-mode handoffs (BT→BT Locate, WiFi→WiFi Locate,
Spy Stations→Waterfall) that assumed target module was already loaded.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The OOK subprocess was spawned without start_new_session=True, so
process.terminate() only signalled the parent — child processes kept
running. Now uses os.killpg() to terminate the entire process group,
matching the pattern used by all other routes (ADS-B, AIS, ACARS, etc.).
Also fixes silent error swallowing in the frontend stop handler so the
UI resets even if the backend request fails.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The airband start function was calling parseInt() directly on composite
device selector values like "rtlsdr:0", which always returned NaN and
fell back to device 0. This also meant sdr_type was never sent to the
backend, and could result in int(None) TypeError on the server.
Now properly splits the composite value (matching ADS-B/ACARS/VDL2
pattern) and sends both device index and sdr_type. Also hardened
backend int() parsing to use explicit None checks.
Fixes: "Airband Error: Invalid parameter: int() argument must be a
string, a bytes-like object or a real number, not 'NoneType'"
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Detect crashed rtl_433 process via poll() and clean up stale state
instead of permanently blocking restarts with 409
- Replace innerHTML+onclick preset rendering with createElement/addEventListener
to prevent XSS via crafted localStorage frequency values
- Normalize preset frequencies to toFixed(3) on save and render
- Add try/catch + shape validation to loadPresets() for corrupted localStorage
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Critical:
- Pass sdr_type_str to claim/release_sdr_device (was missing 3rd arg)
- Add ook_active_sdr_type module-level var for proper device registry tracking
- Add server-side range validation on all timing params via validate_positive_int
Major:
- Extract cleanup_ook() function for full teardown (stop_event, pipes, process,
SDR release) — called from both stop_ook() and kill_all()
- Replace Popen monkey-patching with module-level _ook_stop_event/_ook_parser_thread
- Fix XSS: define local _esc() fallback in ook.js, never use raw innerHTML
- Remove dead inversion code path in utils/ook.py (bytes.fromhex on same
string that already failed decode — could never produce a result)
Minor:
- Status event key 'status' → 'text' for consistency with other modules
- Parser thread logging: debug → warning for missing code field and errors
- Parser thread emits status:stopped on exit (normal EOF or crash)
- Add cache-busting ?v={{ version }}&r=ook1 to ook.js script include
- Fix gain/ppm comparison: != '0' (string) → != 0 (number)
Tests: 22 → 33 (added start success, stop with process, SSE stream,
timing range validation, stopped-on-exit event)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add client-side and server-side military aircraft detection using ICAO
hex ranges and callsign prefixes (matching live dashboard logic). History
table shows MIL/CIV badges with filtering dropdown, and exports respect
the classification filter.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add date range filtering, CSV export, and enhanced history page styling
for the ADS-B aircraft tracking history feature.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add kill_all() handler for OOK process cleanup on global reset
- Fix stop_ook() to close pipes and join parser thread (prevents hangs)
- Add ook.css with CSS classes, replace inline styles in ook.html
- Register ook.css in lazy-load style map (INTERCEPT_MODE_STYLE_MAP)
- Fix frontend frequency min=24 to match backend validation
- Add 22 unit tests for decode_ook_frame, ook_parser_thread, and routes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Parse hackrf_info stderr (newer firmware) and handle non-zero exit codes
- Fix gain_max from 62 to 102 (combined LNA 40 + VGA 62)
- Apply resolved readsb binary path for all SDR types, not just RTL-SDR
- Add HackRF/SoapySDR-specific error messages in ADS-B startup
- Add HackRF waterfall support via rx_sdr IQ capture + FFT
- Add 17 tests for HackRF detection and command builder
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix XSS: escape ASCII output in innerHTML via escapeHtml()
- Fix deadlock: use put_nowait() for queue ops under ook_lock
- Fix SSE leak: add ook to moduleDestroyMap so switching modes
closes the EventSource
- Fix RSSI: explicit null check preserves valid zero values in
JSON export
- Add frame cap: trim oldest frames at 5000 to prevent unbounded
memory growth on busy bands
- Validate timing params: wrap int() casts in try/except, return
400 instead of 500 on invalid input
- Fix PWM hint: correct to short=0/long=1 matching rtl_433
OOK_PWM convention (UI, JS hints, and cheat sheet)
- Fix inversion docstring: clarify fallback only applies when
primary hex parse fails, not for valid decoded frames
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Timing presets: five quick-fill buttons (300/600, 300/900, 400/800, 500/1500, 500 MC)
that populate all six pulse-timing fields at once — maps to CTF flag timing profiles
- RSSI per frame: add -M level to rtl_433 command; parse snr/rssi/level from JSON;
display dB SNR inline with each frame; include rssi_db column in CSV export
- Auto bit-order suggest: "Suggest" button counts printable chars across all stored
frames for MSB vs LSB, selects the winner, shows count — no decoder restart needed
- Pattern filter: live hex/ASCII filter input above the frame log; hides non-matching
frames and highlights matches in green; respects current bit order
- TSCM integration: "Decode (OOK)" button in RF signal device details panel switches
to OOK mode and pre-fills frequency — frontend-only, no backend changes needed
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Several modes didn't pass sdr_type to claim_sdr_device(), defaulting to
'rtlsdr' and triggering an rtl_test USB probe that fails for HackRF with
a confusing "check that the RTL-SDR is connected" message.
- Add sdr_type to frontend start requests for rtlamr, weather-sat, sstv-general
- Read sdr_type in backend routes and pass to claim/release_sdr_device()
- Add early guard returning clear "not yet supported" error for non-RTL-SDR
hardware in modes that are hardcoded to RTL-SDR tools
- Make probe_rtlsdr_device error message device-type-agnostic
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Three issues caused POCSAG messages to be incorrectly hidden or
misclassified in the Device Intelligence panel:
1. detectEncryption used a narrow character class ([a-zA-Z0-9\s.,!?-])
to measure "printable ratio". Messages containing common printable
ASCII characters like : = / + @ fell below the 0.8 threshold and
returned null ("Unknown") instead of false ("Plaintext"). Simplified
to check all printable ASCII (\x20-\x7E) which correctly classifies
base64, structured data, and punctuation-heavy content.
2. The default hideToneOnly filter was true, hiding all address-only
(Tone) pager messages. When RF conditions cause multimon-ng to decode
the address but not the message content, the resulting Tone card was
silently filtered. Changed default to false so users see all traffic
and can opt-in to filtering.
3. The multimon-ng output parser only recognized "Alpha" and "Numeric"
content type labels. Added a catch-all pattern to capture any
additional content type labels that future multimon-ng versions or
forks might emit, rather than dropping them to raw output.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Radiosonde route now runs a quick import check before launching the full
subprocess, catching missing Python dependencies immediately with a clear
message instead of a truncated traceback. Error messages are context-aware:
import errors suggest re-running setup.sh rather than checking SDR connections.
Increased stderr truncation limit from 200 to 500 chars and added full stderr
logging via logger.error() across all affected routes (radiosonde, ais, aprs,
acars, vdl2) for easier debugging.
Closes#173
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When the /devices fetch hasn't completed or fails, parseInt on an empty
select returns NaN which JSON-serializes to null. The backend then calls
int(None) and raises TypeError. Fix both layers: frontend falls back to
0 on NaN, backend uses `or` defaults so null values don't bypass the
fallback.
Also adds a short TTL cache to detect_all_devices() so multiple
concurrent callers on the same page load don't each spawn blocking
subprocess probes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Backend: Add /prefetch-images endpoint that warms the image cache in
parallel using a thread pool, skipping already-cached images.
Frontend: Trigger prefetch on mode init so images load instantly.
Replace per-request Date.now() cache-bust with a 5-minute rotating
key to allow browser caching aligned with backend max-age.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When navigating from another mode (e.g. pager) to the ADS-B dashboard,
the old process could still hold the USB device. Two fixes:
1. routes/adsb.py: If dump1090 starts but SBS port never comes up,
kill the process and return a DEVICE_BUSY error instead of silently
claiming success with no data.
2. templates/adsb_dashboard.html: Pre-flight conflict check in
toggleTracking() queries /devices/status and auto-stops any
conflicting mode before starting ADS-B, with a 1.5s USB release
delay.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Full-stack meteor scatter monitoring mode that captures IQ data from
an RTL-SDR, computes FFT waterfall frames via WebSocket, and runs a
real-time detection engine to identify transient VHF reflections from
meteor ionization trails (e.g. GRAVES radar at 143.050 MHz).
Backend: MeteorDetector with EMA noise floor, SNR threshold state
machine (IDLE/DETECTING/ACTIVE/COOLDOWN), hysteresis, and CSV/JSON
export. WebSocket at /ws/meteor for binary waterfall frames, SSE at
/meteor/stream for detection events and stats.
Frontend: spectrum + waterfall + timeline canvases, event table with
SNR/duration/confidence, stats strip, turbo colour LUT. Uses shared
SDR device selection panel with conflict tracking.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
SSTV mode was slow to populate next-pass countdown and ISS location map
due to uncached skyfield computation and sequential JS API calls.
- Cache ISS position (10s TTL) and schedule (15min TTL, keyed by rounded lat/lon)
- Cache skyfield timescale object (expensive to create on every request)
- Reduce external API timeouts from 5s to 3s
- Fire checkStatus, loadImages, loadIssSchedule, updateIssPosition in parallel via Promise.all
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The /space-weather/data endpoint made 13 sequential HTTP requests, each
with a 15s timeout, causing 30-195s load times on cold cache. Now uses
ThreadPoolExecutor to fetch all sources concurrently, reducing worst-case
latency to ~15s (single slowest request).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
