Fix "What's New" section shifting up/down on smaller screens (#157) by
isolating the logo pulse animation to its own compositing layer, stabilizing
the scrollbar gutter, and pinning the welcome container dimensions.
Morse mode improvements: relocate scope and decoded output panels to the
main content area, use shared SDR device controls, and reduce panel heights
for better layout.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Use run-btn/stop-btn classes and bottom placement instead of
btn-primary/btn-danger in a flex section, and preset-btn class
for band presets. Aligns with all other mode panels.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
TSCM RF scan now auto-detects HackRF via SDRFactory and uses
hackrf_sweep as an alternative to rtl_power. Also includes
improvements to listening post, rtlamr, weather satellite,
SubGHz, Meshtastic, SSTV, WeFax, and process monitor modules.
Fixes#154
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New signal mode for decoding Morse code (CW) transmissions via SDR.
Includes route blueprint, utility decoder, frontend UI, and tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When an error occurred with an out-of-range span (e.g. 30 MHz on
RTL-SDR), the span input kept the invalid value. Track the last
effective span from successful starts and reset the input on error.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add pre-flight check for I/Q capture binary before spawning process
- Capture stderr from I/Q process for better error diagnostics
- Sync effective span value back to UI when backend adjusts it
- Use get_tool_path('rx_sdr') in Airspy, HackRF, LimeSDR, and SDRPlay
command builders to support custom install locations
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace hardcoded rtl_fm with SDRFactory abstraction layer so WeFax works
with any supported SDR hardware, matching the pattern used by APRS and
other modes. RTL-SDR direct sampling flag preserved for HF reception.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Timer threads now log on fire and catch all exceptions so scheduled
captures never die silently. Frontend connects SSE when the scheduler
is enabled (not only on manual Start) and polls /wefax/status every 10s
as a fallback so the UI stays in sync with auto-fired captures.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace window.open() with a fullscreen modal matching the SSTV
pattern: toolbar with download/delete SVG buttons, close button,
click-outside-to-close, and confirmation before delete.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Replace blocking stdout.read() with select()-based non-blocking reads
so the decode thread responds to stop within 0.5s
- Make stop() non-blocking by releasing the lock before terminating the
process and removing the redundant wait()
- Move initial scanning SSE event from start() into the decode thread so
it fires after the frontend EventSource connects
- Update frontend stop() to give immediate UI feedback before the fetch
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
rtl_fm subprocess failures (missing tool, no SDR hardware) were silent —
add tool-path check and post-spawn health check in _start_pipeline(),
show errors prominently in the strip status bar (red text + red dot),
and include error detail in scheduler skip events.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Flash the Start button itself with amber pulse when clicked without a
station selected, and show "Select Station" in the strip status text
right next to the button so the error is immediately visible.
Add a 24-hour timeline bar with broadcast window markers, red UTC time
cursor, and countdown boxes (HRS/MIN/SEC) that tick down to the next
broadcast. Broadcasts show as amber blocks on the timeline track with
imminent/active visual states matching the weather satellite pattern.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix silent failure when starting without station/frequency selected by
flashing amber on status text and dropdowns. Add auto-capture scheduler
that uses fixed UTC broadcast schedules from station data to
automatically start/stop WeFax decoding at broadcast times.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Implement HF radiofax decoding with custom Python DSP pipeline
(rtl_fm USB → Goertzel/Hilbert demodulation), 33-station database
with broadcast schedules, audio waveform scope, live image preview,
and decoded image gallery. Amber/gold UI theme for HF distinction.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
1. Stop Monitor button was disabled during shared monitor retunes
because _syncMonitorButtons disabled the button whenever
_startingMonitor was true, even if the monitor was already active.
Now only disables during initial start (not retunes).
2. Click-to-tune was inconsistent because the shared monitor retune
(rearm after capture restart) captured the center frequency early
in _startMonitorInternal, then sent it via POST to /audio/start.
If the user clicked a new frequency during the async reconnect,
the POST carried the stale frequency and could override the click.
Now retunes use the live _monitorFreqMhz and send a WS tune sync
after reconnecting to ensure the backend has the latest VFO.
When restarting capture for a new frequency, the USB handle from the
just-killed process may not be released by the kernel in time for the
rtl_test probe inside claim_sdr_device. Add retry logic (up to 4
attempts with 0.4s backoff) matching the pattern already used by the
audio start endpoint.
Also clean up stale shared-monitor state in the frontend error handler
so the monitor button is not left disabled when the capture restart
fails.
When changing frequency with shared monitor active, the monitor retune
could be silently dropped if a previous retune was still in-flight,
leaving the UI stuck on "Starting <freq>". After stopping and restarting
the waterfall, the monitor button could remain disabled because
_startingMonitor was never reset and _monitorRetuneTimer was not cleared.
- Cancel in-flight monitor start when queuing a new retune
- Always clear _pendingSharedMonitorRearm in started handler
- Clear _monitorRetuneTimer and reset _startingMonitor in stop()
stop() sets _ws = null before the async onclose fires, so the handler
now early-returns when _ws is null instead of showing the misleading
"WebSocket closed before ready" retry message.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- _waitForPlayback now only succeeds on playing/timeupdate events, not
loadeddata/canplay which fire from just the WAV header before real
audio arrives
- stopMonitor() pauses audio and updates UI immediately instead of
blocking on the backend stop request (1+ second delay)
- Reduced backend audio stop sleep from 1.0s to 0.15s; the start
retry loop already handles USB contention
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Waterfall: load waterfall.css eagerly in <head> instead of lazily on
mode switch; the lazy inject raced with the panel becoming visible,
leaving unstyled HTML for up to 20 s on cold cache
- WebSDR: await a requestAnimationFrame before calling Globe()(mapEl) so
the browser has committed the display:flex layout and clientWidth/
clientHeight are non-zero; previously the globe WebGL renderer was
created at 0×0 (especially on warm-cache refreshes) and could not
recover via the deferred resize calls
- Bump version to 2.22.2
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
