Adds a general-purpose SSTV decoder alongside the existing ISS SSTV mode,
supporting USB/LSB/FM modulation on common amateur radio HF/VHF/UHF
frequencies (14.230 MHz USB, 3.845 MHz LSB, etc.) with auto-detection
of modulation from preset frequency table.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix SDR device stuck claimed on capture failure via on_complete callback
- Improve SatDump output parsing to emit all lines (throttled 2s) for real-time feedback
- Extract shared pass prediction into utils/weather_sat_predict.py with trajectory/ground track support
- Add auto-scheduler (utils/weather_sat_scheduler.py) using threading.Timer for unattended captures
- Add scheduler API endpoints (enable/disable/status/passes/skip) with SSE event notifications
- Add countdown timer (D/H/M/S) with imminent/active glow states
- Add 24h timeline bar with colored pass markers and current-time cursor
- Add canvas polar plot showing az/el trajectory arc with cardinal directions
- Add Leaflet ground track map with satellite path and observer marker
- Restructure to 3-column layout (passes | polar+map | gallery) with responsive stacking
- Add auto-schedule toggle in strip bar and sidebar
- Add rtlamr (Go utility meter decoder) to Dockerfile
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add defensive typeof checks before referencing the Updater global in
loadUpdateStatus() and checkForUpdatesManual() so the settings panel
shows a helpful message instead of crashing. Also swap script load
order so updater.js loads before settings-manager.js.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use networksetup instead of deprecated airport utility for macOS WiFi detection
- Fix SDRDevice attribute access (use getattr instead of dict .get())
- Move Detected Threats panel next to RF Signals in 2-column grid
- Always run correlation/identity analysis at sweep end, even if stopped by user
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The sweep loop's WiFi/BT/RF scan processing had unprotected
timeline_manager.add_observation() calls that could crash an entire
scan iteration, silently preventing all device events from reaching
the frontend. Additionally, scan interval timestamps were only updated
at the end of processing, causing tight retry loops on persistent errors.
- Wrap timeline observation calls in try/except for all three protocols
- Move last_*_scan timestamp updates immediately after scan completes
- Add per-device try/except so one bad device doesn't block others
- Emit sweep_progress after WiFi scan for real-time status visibility
- Log warning when WiFi scan returns 0 networks for easier diagnosis
- Add known_device and score_modifier fields to correlation engine
- Add TSCM scheduling, cases, known devices, and advanced WiFi indicators
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add help modal system with keyboard shortcuts reference
- Add Main Dashboard button in navigation bar
- Make settings modal accessible from all dashboards
- Dashboard CSS improvements and consistency fixes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Display connected clients for access points in detail drawer
- Real-time client updates via SSE streaming
- Client cards show MAC, vendor, RSSI, probed SSIDs, and last seen
- Count badge in Connected Clients header
Other changes:
- Updated aircraft database
- CSS and template refinements
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Issues fixed:
- #113: Display RTL-SDR serial numbers in device selector
- #112: Kill all processes now stops Bluetooth scans
- #111: BLE device list no longer overflows container bounds
- #109: WiFi scanner panels maintain minimum width (no more "imploding")
- #108: Radar device hover no longer causes violent shaking
- #106: "Use GPS" button now uses gpsd for USB GPS devices
- #105: Meter trend text no longer overlaps adjacent columns
- #104: dump1090 errors now provide specific troubleshooting guidance
Changes:
- app.py: Add Bluetooth cleanup to /killall endpoint
- routes/adsb.py: Parse dump1090 stderr for specific error messages
- templates/index.html: Show SDR serial numbers in device dropdown
- static/css/index.css: Fix WiFi/BT panel layouts with proper min-width
- static/css/components/signal-cards.css: Fix meter grid overflow
- static/css/components/proximity-viz.css: Fix radar hover transform
- static/css/settings.css: Add GPS detection spinner
- static/js/components/proximity-radar.js: Add invisible hit areas
- static/js/core/settings-manager.js: Use gpsd before browser geolocation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add /devices/status endpoint showing which SDR is in use and by what mode
- Add real-time status panel on main dashboard with 5s auto-refresh
- Add Bias-T toggle to ADS-B dashboard with localStorage persistence
- Auto-detect correct dump1090 bias-t flag (--enable-biast vs unsupported)
- Standardize SDR device labels across all pages
Closes#102
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Initialize currentDeviceList from server-provided deviceList on page load
and auto-select the correct hardware type dropdown value. Previously the
device list was empty until "Refresh Devices" was clicked, causing the
hardware type dropdown to show incorrect values.
Fixes#99
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When refreshing agent WiFi interfaces, check if any interface has
type='monitor' and automatically set the monitor status to Active.
Previously the UI only showed Active when monitor was explicitly
enabled via the button.
Agent fixes:
- Fix Ctrl+C hang by running cleanup in background thread
- Add force-exit on double Ctrl+C
- Improve exception handling in output reader threads to prevent
bad file descriptor errors on shutdown
- Reduce cleanup timeouts for faster shutdown
Controller/UI fixes:
- Add URL validation for agent registration (check port, protocol)
- Show helpful message when agent is unreachable during registration
- Clarify API key field label (reserved for future use)
- Add client-side URL validation with user-friendly error messages
WiFi agent mode fixes:
- Add polling fallback for deep scan when push mode is disabled
- Polls /controller/agents/{id}/wifi/data every 2 seconds
- Detect running scans when switching to an agent
- Fix scan_mode detection (agent uses params.scan_type)
Allow connecting to WiFi-enabled Meshtastic devices via TCP/IP in
addition to USB/Serial connections. This enables remote monitoring
of mesh nodes that have WiFi capability (T-Beam, Heltec WiFi LoRa, etc).
- Add connection_type parameter ('serial' or 'tcp') to /meshtastic/start
- Add hostname parameter for TCP connections
- Update UI with connection type dropdown and hostname input field
- Show connection type in status responses
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The sensor field mapping only handled pressure_hPa (weather station
barometric pressure), causing TPMS tire pressure data to not display.
Added mappings for TPMS-specific rtl_433 field names:
- pressure_PSI (common in US TPMS sensors)
- pressure_kPa
- tire_pressure_kPa
- flags/state (tire state indicators)
Fixes#95
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add ISS SSTV decoder mode with real-time tracking globe
- Add GitHub update notifications for new releases
- Enhance Meshtastic with QR codes and telemetry display
- Add new Space category for satellite modes
- Fix SoapySDR detection, dump1090 builds, and Flask compatibility
- Update version numbers and changelog
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add new "Space" category with Satellite and ISS SSTV modes
- Rename "Scanner" to "Listening Post"
- SSTV now uses global SDR device selector
- Meshtastic map markers more visible (stronger glow, larger size)
- CSS layout fixes using flex instead of fixed heights
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use real Leaflet map with proper tile layers (same as satellite section)
- ISS marker with pulsing glow animation
- Ground track orbit line showing ISS path
- Map auto-pans to follow ISS position
- Simplified overlay showing position and next pass info
- Responsive layout that adapts to screen size
- Removed custom canvas rendering and continent data
The Leaflet map uses the same tile provider as other sections,
ensuring the ISS position is accurately displayed on a real map.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use simple equirectangular projection for guaranteed accuracy
- Direct linear mapping: lon to x, lat to y (no complex 3D math)
- Show ISS ground track orbit path
- Continent outlines rendered on flat map
- Canvas changed to 300x150 for proper 2:1 aspect ratio
- Updated CSS for rectangular map styling
The 2D map uses a straightforward coordinate transformation
that cannot produce incorrect positions.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Update TLE data with current orbital elements for accurate predictions
- Add location inputs (lat/lon) and GPS button to SSTV stats strip
- Add TLE update button to fetch latest orbital data from CelesTrak
- Add 3D globe visualization showing real-time ISS position
- Display ISS coordinates and altitude below globe
- Auto-refresh ISS position every 5 seconds
- Add NOAA-15, NOAA-18, NOAA-19 satellites to TLE data
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix GPS button not working (pass button element to handler)
- Hide output element in SSTV mode to allow panels to fill space
- Add explicit height rules for SSTV panels to expand vertically
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add slow-scan television decoder for receiving images from ISS.
Includes new Space dropdown in navigation grouping Satellite and SSTV modes.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add inline script in <head> that checks localStorage before page renders
- If disclaimer not accepted, hide welcome page via injected CSS
- Show disclaimer modal on DOMContentLoaded
- After accepting, remove gate CSS and reveal welcome page
- User must accept disclaimer before they can access the application
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Reverts the utility bar feature and disclaimer timing changes that
caused the disclaimer to flash on screen for users who had already
accepted it.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Show disclaimer BEFORE welcome page on first visit (was showing after)
- Add shared utility-bar.html partial with theme, animations, settings, help
- Include utility bar on Aircraft, Satellite, and Vessels dashboards
- Support ?settings=open and ?help=open URL params from dashboards
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Settings.registerMap() to register maps for tile updates
- Add Settings.createTileLayer() to create tile layers from settings
- Update _updateMapTiles() to use registered maps
- Expose all maps to window object for settings manager access
- All dashboards now use Settings manager when available
- Tile provider changes in settings now apply immediately to all maps
- Use Fastly CDN for CARTO tiles (more reliable)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The {r} retina parameter was causing CARTO to return light/gray tiles
instead of dark tiles. Removed {r} from all tile layer URLs.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix traceroute button in Meshtastic popups using event delegation
instead of inline onclick handlers (more reliable with Leaflet)
- Update all maps to use dark CARTO tiles for consistency:
- ADS-B dashboard radar map
- AIS dashboard vessel map
- Satellite dashboard ground map
- APRS map
- Satellite ground track map in main UI
- Change settings manager default tile provider to cartodb_dark
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Transform flat scrolling meter list into grouped view showing one card
per unique meter with:
- Consumption history tracking and delta from previous reading
- Trend sparkline visualization (color-coded for normal/elevated/spike)
- Consumption rate calculation (units/hour over 30-min window)
- Cards update in place instead of creating duplicates
- Alert sound only plays for new meters
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add getMeterTypeInfo() with ERT endpoint type lookups for utility type
(Electric/Gas/Water) and manufacturer (Itron, Landis+Gyr, Neptune, etc.)
- Hook addRtlamrReading into trackDevice() for Device Intelligence panel
- Add meter protocol handling to generateDeviceId()
- Display manufacturer and utility type on meter cards
- Show utility type as badge, manufacturer in meta row and details panel
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Make logo clickable, opens GitHub Pages in new tab
- Match What's New box height to Select Mode box
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
