diff --git a/doc/installing-from-release-windows.md b/doc/installing-from-release-windows.md
index 3b35c36..fbb9477 100644
--- a/doc/installing-from-release-windows.md
+++ b/doc/installing-from-release-windows.md
@@ -4,7 +4,7 @@ Windows support in Rayhunter's installer is a work-in-progress. Depending on the
 
 ## TP-Link
 
-1. Insert a FAT-formatted SD card into the device. We don't need much storage, a few 100 MB will suffice.
+1. Insert a FAT-formatted SD card. This will be used to store all recordings.
 2. Connect the device via WiFi or USB Tethering -- you should be able to view the TP-Link admin page on <http://192.168.0.1>.
 3. Download the latest release (must be at least 0.3.0) for windows-x86_64, and unpack the zipfile.
 4. Open PowerShell or CMD in that extracted folder, the installer: `./installer tplink`
diff --git a/doc/installing-from-release.md b/doc/installing-from-release.md
index 1cefe42..4b64c40 100644
--- a/doc/installing-from-release.md
+++ b/doc/installing-from-release.md
@@ -2,7 +2,8 @@
 
 Make sure you've got one of Rayhunter's [supported devices](./supported-devices.md). These instructions have only been tested on macOS and Ubuntu 24.04. If they fail, you will need to [install Rayhunter from source](./installing-from-source.md).
 
-1. Download the latest `rayhunter-vX.X.X-PLATFORM.zip` from the [Rayhunter releases page](https://github.com/EFForg/rayhunter/releases) for your platform:
+1. For the TP-Link only, insert a FAT-formatted SD card. This will be used to store all recordings.
+2. Download the latest `rayhunter-vX.X.X-PLATFORM.zip` from the [Rayhunter releases page](https://github.com/EFForg/rayhunter/releases) for your platform:
     - for Linux on x64 architecture: `linux-x64`
     - for Linux on ARM64 architecture: `linux-aarch64`
     - for Linux on armv7/v8 (32-bit) architecture: `linux-armv7`
@@ -10,19 +11,19 @@ Make sure you've got one of Rayhunter's [supported devices](./supported-devices.
     - for MacOS on ARM (M1/M2 etc.) architecture: `macos-arm`
     - for Windows: `windows-x86_64`
 
-2. Decompress the `rayhunter-vX.X.X-PLATFORM.zip` archive. Open the terminal and navigate to the folder. (Be sure to replace X.X.X with the correct version number!)
+3. Decompress the `rayhunter-vX.X.X-PLATFORM.zip` archive. Open the terminal and navigate to the folder. (Be sure to replace X.X.X with the correct version number!)
 
     ```bash
     unzip ~/Downloads/rayhunter-vX.X.X-PLATFORM.zip
     cd ~/Downloads/rayhunter-vX.X.X-PLATFORM
     ```
 
-3. Turn on your device by holding the power button on the front.
+4. Turn on your device by holding the power button on the front.
 
    * For the Orbic, connect the device using a USB-C cable.
    * For TP-Link, connect to its network using either WiFi or USB Tethering.
 
-4. Run the installer:
+5. Run the installer:
 
     ```bash
     # On MacOS, you must first remove the quarantine bit
@@ -39,7 +40,7 @@ Make sure you've got one of Rayhunter's [supported devices](./supported-devices.
 
     You will know it is done when you see terminal output that says `Testing Rayhunter... done`
 
-5. Rayhunter should now be running! You can verify this by [viewing Rayhunter's web UI](./using-rayhunter.md). You should also see a green line flash along the top of top the display on the device.
+6. Rayhunter should now be running! You can verify this by [viewing Rayhunter's web UI](./using-rayhunter.md). You should also see a green line flash along the top of top the display on the device.
 
 ## Troubleshooting