diff --git a/doc/installing-from-release-windows.md b/doc/installing-from-release-windows.md
index a17bbdc..bfedbe7 100644
--- a/doc/installing-from-release-windows.md
+++ b/doc/installing-from-release-windows.md
@@ -11,6 +11,12 @@ Windows support in Rayhunter's installer is a work-in-progress. Depending on the
 
 ## Orbic
 
+<div class=warning><strong>
+
+[The Windows installer is known to be buggy](https://github.com/EFForg/rayhunter/issues/366). Consider using the [Network-based installer](./orbic.md#the-network-installer).
+
+</strong></div>
+
 1. Connect the device to your computer using the provided USB cable.
 1. Install the [Zadig WinUSB driver installer](https://zadig.akeo.ie/).
 1. Open Zadig, click options->show all devices 
diff --git a/doc/orbic.md b/doc/orbic.md
index 905eba7..fbdd1a7 100644
--- a/doc/orbic.md
+++ b/doc/orbic.md
@@ -19,8 +19,25 @@ or on [eBay](https://www.ebay.com/sch/i.html?_nkw=orbic+rc400l).
 | Wifi 5Ghz | a/ac/ax |
 | Wifi 6 | 🮱 |
 
+## The Network Installer
+
+Since Rayhunter 0.6.0 there is an alternative, experimental installation
+procedure at `./installer orbic-network` that is supposed to eventually replace
+`./installer orbic`. It does not require any USB driver installation and works
+identically on Windows, Mac and Linux. From our testing it works much more
+reliably on Windows than `./installer orbic` does.
+
+The drawback is that the device's admin password is required. If you have a Kajeet-branded "SmartSpot" you currently have to use the USB-based `./installer orbic`, as we currently don't know of a way to get that admin password.
+
+1. Connect to the Orbic's network via WiFi or USB tethering
+2. Run `./installer orbic-network`
+3. The installer will ask you to log into the admin UI on `localhost:4000`. The password for that is the same as the WiFi password.
+4. As soon as you're logged in, the installer will continue and reboot the device.
+
 ## Obtaining a shell
 
 After running through the installation procedure, you can obtain a root shell
 by running `adb shell` or `./installer util shell`. Then, inside of that shell
 you can run `/bin/rootshell` to obtain "fakeroot."
+
+If you are using the network installer, there will not be a rootshell and ADB will not be enabled by the installer. Instead you can use `./installer util orbic-start-telnet` and connect to the hotspot using `nc 192.168.1.1 23`. On Windows you might not have `nc` and will have to use WSL for that.