* client mode added
* Prevent OTA daemons dmclient and upgrade from running and phoning home to Verizon
* Fix workflow
* WIFI changes to support moxee. May need to rebase as delivering refactoring under other PR.
* code changes for rust based wifi client mode docs next
* Doc changes & security fixes
* Added watchdog and recover if crash occurs for wifi.
* Remove changes which were from device UI work (seperate feature which snuck into this branch)
* Add missing wifi and firewall module declarations
* cleaning up the code a bit
* Gate wpa_suplicant in installer and workflow to avoid building binary every push
* fix to check diskspace
* Improved support for subnet colisions, and attempts to rejoin network.
* Add WiFi client support and S01iptables to T-Mobile and Wingtech installers
Both installers now deploy wpa_supplicant, wpa_cli, udhcpc-hook.sh, and
the S01iptables boot-time firewall script. Config generation uses the
shared install_config/install_wifi_creds helpers instead of manual string
replacement.
* Revert "Add WiFi client support and S01iptables to T-Mobile and Wingtech installers"
This reverts commit 944b369c4f.
* Fix build: ignore unused wifi_ssid/wifi_password fields in T-Mobile and Wingtech installers
* Moved to a wifi crate
* Add host route and arp_filter to prevent subnet collisions
* add wakelock so kernel doesn't shut down wifi on battery when wifi is enabled
* Move wifi to external wifi-station crate, remove wifi from installer, extract OTA blocking
* fixed outdated info, moved udhcpc hook to wifi-station crate.
* Update to new version of wifi-station
* Address PR review feedback: replace Docker wpa build, add iw, remove OTA, revert unrelated changes
- Replace Docker-based wpa_supplicant build with shell script (scripts/build-wpa-supplicant.sh)
- Add iw cross-compilation and deployment to Orbic installer
- Skip wifi tool install if binary already exists on device
- Remove OTA daemon blocker (extracted for separate PR)
- Revert unrelated UZ801 and T-Mobile installer changes
- Remove connection.rs test scaffolding
- Rewrite S01iptables init script to read config.toml directly
- Pin url crate to 2.5.4 to fix MSRV
* Fix build script: use bash for parameter substitution
The ${VAR//pattern/replacement} syntax is a bash extension that
doesn't work in dash (Ubuntu's /bin/sh).
* Fix iw build: export PKG_CONFIG_LIBDIR as env var
Passing PKG_CONFIG_LIBDIR as a make variable doesn't export it to
$(shell pkg-config ...) calls. Set it as an environment variable
so pkg-config finds the cross-compiled libnl.
* Point wifi-station to GitHub rev 97c579a
* add comment
* Update daemon/src/config.rs
Add decorators
Co-authored-by: Andrej Walilko <walilkoa@gmail.com>
* Update daemon/src/server.rs
add utopia doc support
Co-authored-by: Andrej Walilko <walilkoa@gmail.com>
* Update daemon/src/server.rs
add utopia doc support
Co-authored-by: Andrej Walilko <walilkoa@gmail.com>
* Update to wifi-station with utoipa doc strings
* add utoipa to wifi-station
* added WPA3 support
* fix firewall port detection, update wifi-station to c267d37
fix ntfy port_or_known_default, comment out ntfy_url in config
template, update wifi-station with resolv.conf bind mount
fallback, udhcpc_bin config, and module path fix for UZ801
* show wifi UI for tmobile and wingtech, add udhcpc_bin config
both devices have wifi hardware and backend support. wingtech
verified on hardware (QCA6174 via PCIe). uz801 excluded for now
due to driver scan limitations with hostapd active.
* install wifi tools from orbic-usb installer, fix DNS default to Quad9, bump wifi-station rev
* fix Modal scroll listener leak, correct file transfer timeout math, document firewall fail-open, clarify UZ801 wifi status
* build-dev.sh: build wifi tools so install-dev works for orbic-family devices
* update Cargo.lock for wifi-station e8ec5b4
* fix setup_timeout_server crypto provider install, apply rustfmt
* Update installer/src/connection.rs
Co-authored-by: Cooper Quintin <cooperq@users.noreply.github.com>
* Update installer/src/orbic.rs
Co-authored-by: Cooper Quintin <cooperq@users.noreply.github.com>
* apply rustfmt to AdbConnection::run_command
---------
Co-authored-by: Andrej Walilko <walilkoa@gmail.com>
Co-authored-by: Cooper Quintin <cooperq@users.noreply.github.com>
There are no important changes in the new tower version. The only reason
i'm bumping it is because it exposes our mis-configuration of tokio: We
depend on API surface enabled by `io-std`, but don't enable that
feature. Tower 0.5.2 pulls in that feature though, and our code works
anyway. Tower 0.5.3 no longer requires this feature and our code stops
compiling.
Every once in a while, I get the error posted in #901:
Caused by:
0: Failed to send login request
1: error sending request
2: client error (SendRequest)
3: connection closed before message completed
(either this or "failed to start telnet" -- in either case there's a
request happening before it, and it's always "connection closed before
message completed")
Disabling connection pooling seems to reduce the amount of flakiness.
Here is what I used to test this fix:
while echo | cargo run -p installer util orbic-shell --admin-password 96df5476 ; do true; done
Usually it would stop <100 iterations, now it can do 800+ iterations.
This fixes several space-related issues at once.
We have observed the following phenomenon on TP-Link, Orbic and Moxee:
- Filling /data bricks the device (broken wifi, broken rndis, broken
display)
- Filling /cache does not (it only bricks rayhunter if it's installed
there, and it might break firmware updates)
Therefore it would make sense to store the entire rayhunter installation
in /cache.
This is a great idea for TP-Link and Moxee, because /cache is
significantly larger than /data. However, on Orbic, /data is
significantly larger than /cache!
This PR refactors orbic-network and tplink to use a shared codepath for
setting up the data directory. A symlink is created at /data/rayhunter,
and what it points to is device-specific:
- Orbic will have its data at `/data/rayhunter-data`
- There is a new alias `installer moxee` that overrides this to
`/cache/rayhunter-data`
- TP-Link will have its data at /cache/rayhunter-data when there's no SD
card, and /media/whatever when there is one.
In all cases, existing data is migrated to the new location. The user
can switch back and forth between two values of --data-dir and the data
will be moved over every time.
This PR has one huge wart, and that is that the USB installer for Orbic
remains untouched. The annoying reason for this is that the
DeviceConnection trait is insufficient to reflect all the different
kinds of shells you can have over USB: adb with fakeroot, and serial
with real root. I think it's not possible to create the right
directories with 'rootshell -c'.
I'm thinking of spawning a telnet server over serial, so that we can
just do telnet again, but this is for another time.
telnet_send_command_with_output returns output with the original command
contained. This leads to higher-level bugs. Fix#894
Also, change telnet_send_command_with_output to not return any "exit
code" related output. This is now only part of telnet_send_command,
which means this output does not leak into users of the DeviceConnection
trait.
Currently you have to override a bunch of paths to use firmware-devel
when building the installer. This changes that, and adds a new
FIRMWARE_PROFILE envvar that can be used to fix both rootshell and
rayhunter-daemon paths at the same time.
There is now also a new cargo command for building rootshell, similar to
how building the daemon firmware works.
I'm not sure what to do with make.sh. I have personally never used it.
On tplink and orbic, do not overwrite config files by default. There is
a new flag `installer orbic --reset-config` that one can use to restore
the old behavior. This fixes#778, a long-standing issue existent since
0.3.0.
The businesslogic for config file overrides is shared to some degree.
The Install trait from pinephone.rs has been moved out and renamed to
DeviceConnection for that purpose, so that `install_config` can be
shared across installers, which in turn can delegate to the trait for
running commands and copying files. This also works towards #542.
However, the pinephone and other installers have not been adapted to
support --reset-config out of fear of regressions. A future refactor by
somebody with ability to test on pinephone should probably also consider
using the same DeviceConnection impl as orbic, if possible.
We sometimes, but rarely, get bug reports where the sdcard fails
mounting. Write a dedicated log file for the mounting action to /tmp,
separately from the rayhunter logfile that is on the sdcard itself. That
log file is probably going to be small so it can fit in /tmp.
* Remove powershell script
Currently install.ps1 and installer are both released in the root of the
zipfile. I think that's a bit confusing. We also don't really support
the ps1 script since a while.
* Remove rootshell and config.toml.in from release folder
On firmware M7350(EU)_V9_9.0.2 Build 241021 (but not sooner), entryId=2
was being sent before entryId=1. entryId=2 is invalid if entryId=1 does
not exist yet. The reason it works is due to both requests firing
simultaneously, so sometimes entryId=1 is indeed being registered first.
We may also be hitting random race conditions on the backend, not 100%
sure. Try to alleviate them by sleeping 1 second between started
requests and waiting until the DOM is ready.
Also, on sluggish devices, it can happen that nc is not ready within
100ms. Fixing that with exponential backoff.
