# Installing from the latest release (Windows)

Windows support in Rayhunter's installer is a work-in-progress. Depending on the device, the installation instructions differ.

## TP-Link

1. Connect the device via WiFi or USB Tethering -- you should be able to view the TP-Link admin page on [http://192.168.0.1](http://192.168.0.1).
2. Download the latest release (must be at least 0.3.0), and unpack the zipfile.
3. Open PowerShell or CMD in that extracted folder, and run the binary appropriate for your operating system: `./installer-windows-x86_64/installer tplink`
4. Follow the instructions on the screen, if there are any.

## Orbic

1. Install the [Zadig WinUSB driver](https://zadig.akeo.ie/).
2. Download the latest `release.zip` from the [Rayhunter releases page](https://github.com/EFForg/rayhunter/releases).
3. Unzip `release.zip`.
4. Save the `install.ps1` file below in top of the folder that was unzipped from release.zip.
5. Run the install script by double clicking on `install.ps1`. A powershell window will launch.
    The device will restart multiple times over the next few minutes.
    You will know it is done when you see terminal output that says `checking for rayhunter server...success!`
6. Rayhunter should now be running! You can verify this by following the instructions below to [view the web UI](#usage-viewing-the-web-ui). You should also see a green line flash along the top of top the display on the device.

# `install.ps1`
```powershell

$global:adb = "./platform-tools-latest-windows/platform-tools/adb.exe"
$global:serial = "./serial-windows-x86_64/serial.exe"

function _adb_push {
	$proc = start-process -passthru -wait $global:adb -argumentlist "push", $args[0], $args[1]
	if ($proc.exitcode -ne 0) {
		write-host "push exited with exit code $($proc.exitcode)"
	}
	return $proc.exitcode
}

function _adb_shell {
	$proc = start-process -passthru -wait $global:adb -argumentlist "shell", $args[0]
	if ($proc.exitcode -ne 0) {
		write-host "shell exited with exit code $($proc.exitcode)"
	}
	return $proc.exitcode
}

function _wait_for_adb_shell {
	do {
		start-sleep -seconds 1
	} until ((_adb_shell "cat /etc/ver.conf") -eq 0)
}

function _wait_for_atfwd_daemon {
	do {
		start-sleep -seconds 1
	} until ((_adb_shell "pgrep atfwd_daemon") -eq 0)
}

function force_debug_mode {
	write-host "Using adb at $($global:adb)"
	write-host "Forcing a switch into debug mode to enable ADB"
	&$global:serial "--root" | Out-Host
	write-host "adb enabled, waiting for reboot..." -nonewline
	_wait_for_adb_shell
	write-host " it's alive!"
	write-host "waiting for atfwd_daemon to start ..." -nonewline
	_wait_for_atfwd_daemon
	write-host " done!"
}

function setup_rootshell {
	_adb_push "rootshell" "/tmp"
	write-host "cp..."
	&$global:serial "AT+SYSCMD=cp /tmp/rootshell /bin/rootshell" | Out-Host
	start-sleep -seconds 1
	write-host "chown..."
	&$global:serial "AT+SYSCMD=chown root /bin/rootshell" | Out-Host
	start-sleep -seconds 1
	write-host "chmod..."
	&$global:serial "AT+SYSCMD=chmod 4755 /bin/rootshell" | Out-Host
	start-sleep -seconds 1
	_adb_shell '/bin/rootshell -c id'
	write-host "we have root!"
}

function setup_rayhunter {
	&$global:serial "AT+SYSCMD=mkdir -p /data/rayhunter" | Out-Host
	_adb_push "config.toml.example" "/tmp/config.toml"
	&$global:serial "AT+SYSCMD=mv /tmp/config.toml /data/rayhunter" | Out-Host
	_adb_push "rayhunter-daemon-orbic/rayhunter-daemon" "/tmp/rayhunter-daemon"
	&$global:serial "AT+SYSCMD=mv /tmp/rayhunter-daemon /data/rayhunter" | Out-Host
	_adb_push "scripts/rayhunter_daemon" "/tmp/rayhunter_daemon"
	&$global:serial "AT+SYSCMD=mv /tmp/rayhunter_daemon /etc/init.d/rayhunter_daemon" | Out-Host
	_adb_push "scripts/misc-daemon" "/tmp/misc-daemon"
	&$global:serial "AT+SYSCMD=mv /tmp/misc-daemon /etc/init.d/misc-daemon" | Out-Host

	&$global:serial "AT+SYSCMD=chmod 755 /data/rayhunter/rayhunter-daemon" | Out-Host
	&$global:serial "AT+SYSCMD=chmod 755 /etc/init.d/rayhunter_daemon" | Out-Host
	&$global:serial "AT+SYSCMD=chmod 755 /etc/init.d/misc-daemon" | Out-Host

	write-host "waiting for reboot..."
	&$global:serial "AT+SYSCMD=shutdown -r -t 1 now" | Out-Host
	do {
		start-sleep -seconds 1
	} until ((_adb_shell "true 2> /dev/null") -ne 0)

	_wait_for_adb_shell
	write-host "done!"
}

function test_rayhunter {
	$URL = "http://localhost:8080"
	$fproc = start-process $global:adb -argumentlist "forward", "tcp:8080", "tcp:8080" -wait -passthru
	if ($fproc.exitcode -ne 0) {
		write-host "adb forward tcp:8080 tcp:8080 failed with exit code $($proc.exitcode)"
		return
	}
	write-host "checking for rayhunter server..." -nonewline
	$seconds = 0
	do {
		$resp = invoke-webrequest -uri $URL
		if ($resp.statuscode -eq 200) {
			write-host "success!"
			write-host "you can access rayhunter at $($URL)"
			return
		}
		start-sleep 1
		$seconds = $seconds + 1
	} until ($seconds -eq 30)
	write-host "timeout reached! failed to reach rayhunter url $($URL), something went wrong :("
}

function get_android_tools {
	write-host "adb not found, downloading local copy"
	invoke-webrequest "https://dl.google.com/android/repository/platform-tools-latest-windows.zip" -outfile ./platform-tools-latest-windows.zip
	expand-archive -force -path "platform-tools-latest-windows.zip"
}

if (-not (test-path -path $global:serial)) {
	write-error "can't find serial, aborting"
	return
}

if (-not (test-path -path $global:adb)) {
	get_android_tools
}

force_debug_mode
setup_rootshell
setup_rayhunter
test_rayhunter$global:adb = "./platform-tools-latest-windows/platform-tools/adb.exe"
$global:serial = ".\installer-windows-x86_64\installer.exe"

function _adb_push {
    & $global:adb -d push @args
    $exitCode = $LASTEXITCODE	
	if ($exitCode -ne 0) {
		write-host "push exited with exit code $($exitCode)"
	}
	return $proc.exitcode
}

function _adb_shell {
    & $global:adb -d shell @args
    $exitCode = $LASTEXITCODE	
	if ($exitCode -ne 0) {
		write-host "shell exited with exit code $($exitCode)"
	}
	return $proc.exitcode
}

function _wait_for_adb_shell {
	do {
		start-sleep -seconds 1
	} until ((_adb_shell "uname -a") -eq 0)
}

function _wait_for_atfwd_daemon {
	do {
		start-sleep -seconds 1
	} until ((_adb_shell "pgrep atfwd_daemon") -eq 0)
}

function force_debug_mode {
	write-host "Using adb at $($global:adb)"
	write-host "Forcing a switch into debug mode to enable ADB"
	_serial "util" "serial" "--root" | Out-Host
	write-host "adb enabled, waiting for reboot..." -nonewline
	_wait_for_adb_shell
	write-host " it's alive!"
	write-host "waiting for atfwd_daemon to start ..." -nonewline
	_wait_for_atfwd_daemon
	write-host " done!"
}
function _serial {
    param (
        [Parameter(Mandatory = $false, ValueFromRemainingArguments = $true)]
        [string[]]$Args
    )

    # Build the full argument list
    $allArgs = @("util", "serial") + $Args

    # Call the serial executable
    & $global:serial @allArgs
}

function setup_rootshell {
	_adb_push "rootshell" "/tmp"
	write-host "cp..."
	_serial "AT+SYSCMD=cp /tmp/rootshell /bin/rootshell" | Out-Host
	start-sleep -seconds 1
	write-host "chown..."
	_serial "AT+SYSCMD=chown root /bin/rootshell" | Out-Host
	start-sleep -seconds 1
	write-host "chmod..."
	_serial "AT+SYSCMD=chmod 4755 /bin/rootshell" | Out-Host
	start-sleep -seconds 1
	_adb_shell '/bin/rootshell -c id'
	write-host "we have root!"
}

function setup_rayhunter {
	_serial "AT+SYSCMD=mkdir -p /data/rayhunter" | Out-Host
	_adb_push "config.toml.example" "/tmp/config.toml"
	_serial "AT+SYSCMD=mv /tmp/config.toml /data/rayhunter" | Out-Host
	_adb_push "rayhunter-daemon-orbic/rayhunter-daemon" "/tmp/rayhunter-daemon"
	_serial "AT+SYSCMD=mv /tmp/rayhunter-daemon /data/rayhunter" | Out-Host
	_adb_push "scripts/rayhunter_daemon" "/tmp/rayhunter_daemon"
	_serial "AT+SYSCMD=mv /tmp/rayhunter_daemon /etc/init.d/rayhunter_daemon" | Out-Host
	_adb_push "scripts/misc-daemon" "/tmp/misc-daemon"
	_serial "AT+SYSCMD=mv /tmp/misc-daemon /etc/init.d/misc-daemon" | Out-Host

	_serial "AT+SYSCMD=chmod 755 /data/rayhunter/rayhunter-daemon" | Out-Host
	_serial "AT+SYSCMD=chmod 755 /etc/init.d/rayhunter_daemon" | Out-Host
	_serial "AT+SYSCMD=chmod 755 /etc/init.d/misc-daemon" | Out-Host

	write-host "waiting for reboot..."
	_serial "AT+SYSCMD=shutdown -r -t 1 now" | Out-Host
	do {
		start-sleep -seconds 1
	} until ((_adb_shell "true 2> /dev/null") -ne 0)

	_wait_for_adb_shell
	write-host "done!"
}

function test_rayhunter {
	$URL = "http://localhost:8080"
	& $global:adb -d shell forward tcp:8080 tcp:8080
    $exitCode = $LASTEXITCODE
	if ($exitCode -ne 0) {
		write-host "adb forward tcp:8080 tcp:8080 failed with exit code $($proc.exitcode)"
		return
	}
	write-host "checking for rayhunter server..." -nonewline
	$seconds = 0
	do {
		$resp = invoke-webrequest -uri $URL
		if ($resp.statuscode -eq 200) {
			write-host "success!"
			write-host "you can access rayhunter at $($URL)"
			return
		}
		start-sleep 1
		$seconds = $seconds + 1
	} until ($seconds -eq 30)
	write-host "timeout reached! failed to reach rayhunter url $($URL), something went wrong :("
}

function get_android_tools {
	write-host "adb not found, downloading local copy"
	invoke-webrequest "https://dl.google.com/android/repository/platform-tools-latest-windows.zip" -outfile ./platform-tools-latest-windows.zip
	expand-archive -force -path "platform-tools-latest-windows.zip"
}

if (-not (test-path -path $global:serial)) {
	write-error "can't find serial, aborting"
	return
}

if (-not (test-path -path $global:adb)) {
	get_android_tools
}

force_debug_mode
setup_rootshell
setup_rayhunter
test_rayhunter
```