Updated changelog

Support IPv6 for outbound TCP interface (TCPClientInterface)

Changelog.md

@@ -1,6 +1,67 @@
+### 2024-10-11: RNS β 0.8.4
+
+This release fixes a number of bugs and improves reliability of automatic reconnection when BLE-connected RNodes unexpectedly disappear or lose connection.
+
+**Changes**
+- Improved RNode BLE reconnection realiability
+- Added RNode battery state to `rnstatus` output
+- Fixed resource transfer hanging for a long time over slow links if proof packet is lost
+- Fixed missing import on Android
+
+**Release Hashes**
+```
+d3f7a9fddc6c1e59b1e4895756fe602408ac6ef09de377ee65ec62d09fff97a3 dist/rns-0.8.4-py3-none-any.whl
+eb3843bcab1428be0adb097988991229a4c03156ab40cc9c6e2d9c590d8b850b dist/rnspure-0.8.4-py3-none-any.whl
+```
+
+### 2024-10-10: RNS β 0.8.3
+
+This release fixes a bug in resource transfer progress calculation, improves RNode error handling, and brings minor improvements to the `rncp` utility.
+
+**Changes**
+- Fixed a bug in resource transfer progress calculations
+- Added physical layer transfer rate output option to `rncp`
+- Added save directory option to `rncp`
+- Improved path handling for the fetch-jail option of of `rncp`
+- Added error detection for modem communication timeouts on connected RNode devices
+
+**Release Hashes**
+```
+54ddab32769081045db5fe45b27492cc012bf2fad64bc65ed37011f3651469fb rns-0.8.3-py3-none-any.whl
+a04915111d65b05a5f2ef2687ed208813034196c0c5e711cb01e6db72faa23ef rnspure-0.8.3-py3-none-any.whl
+```
+
+### 2024-10-06: RNS β 0.8.2
+
+This release adds several new boards to `rnodeconf`, fixes a range of bugs and improves transport reliability.
+
+Thanks to @jacobeva, @prusnak and @deavmi who contributed to this release!
+
+**Changes**
+- Added support for T-Beam Supreme devices to `rnodeconf`
+- Added support for T3S3 devices to `rnodeconf`
+- Added support for T-Deck devices to `rnodeconf`
+- Added support for new hardware error codes from connected RNodes
+- Added the ability to control the display on nRF52-based RNodes
+- Improved resource transfers over very slow links, by adding more suitable `MAX_WINDOW` cap if link speed is continously below threshold.
+- Improved `rnodeconf` flashing so manual resets for some devices are no longer required
+- Added edge case handling for receiving a link proof after the link had timed out and been closed, but before it having been purged from active links table
+- Updated supported hardware section of the manual with new boards
+- Tuned path request timing for roaming instances
+- Fixed a bug that caused RNS to fail to initialise in Termux on Android
+- Fixed a bug in RNodeInterface firmware version comparison
+- Fixed a bug in the serial framing of RNodeMultiInterface
+- Fixed a bug in sub-interface spawning of RNodeMultiInterface
+
+**Release Hashes**
+```
+db720a727a09c0c9d76288dec5a995a30146e65d6a4c5c034f47fb60a78f4962 rns-0.8.2-py3-none-any.whl
+ee412535edba48817551658247fb0c843d17e1c97cad9d2a819a7fc627c5ba28 rnspure-0.8.2-py3-none-any.whl
+```
+
 ### 2024-10-02: RNS β 0.8.1
 
-This release add BLE support to RNodeInterface, and support for configuring additional options to `rnodeconf`.
+This release adds BLE support to RNodeInterface, and support for configuring additional options to `rnodeconf`.
 
 **Changes**
 - Added Bluetooth Low Energy support to RNodeInterface

RNS/Interfaces/Android/RNodeInterface.py

@@ -28,8 +28,14 @@ import time
 import math
 import RNS
 
-from able import BluetoothDispatcher, GATT_SUCCESS
-from able.adapter import require_bluetooth_enabled
+try:
+    from able import BluetoothDispatcher, GATT_SUCCESS
+except Exception as e:
+    GATT_SUCCESS = 0x00
+    class BluetoothDispatcher():
+        def __init__(**kwargs):
+            RNS.log("Attempt to initialise BLE connectivity, but Android BLE support library is unavailable", RNS.LOG_ERROR)
+            raise OSError("No BLE support available")
 
 class KISS():
     FEND            = 0xC0
@@ -81,11 +87,15 @@ class KISS():
     ERROR_INITRADIO     = 0x01
     ERROR_TXFAILED      = 0x02
     ERROR_EEPROM_LOCKED = 0x03
+    ERROR_QUEUE_FULL    = 0x04
+    ERROR_MEMORY_LOW    = 0x05
+    ERROR_MODEM_TIMEOUT = 0x06
     ERROR_INVALID_FIRMWARE = 0x10
     ERROR_INVALID_BLE_MTU  = 0x20
 
     PLATFORM_AVR   = 0x90
     PLATFORM_ESP32 = 0x80
+    PLATFORM_NRF52 = 0x70
 
     @staticmethod
     def escape(data):
@@ -652,7 +662,7 @@ class RNodeInterface(Interface):
         if not self.detected:
             raise IOError("Could not detect device")
         else:
-            if self.platform == KISS.PLATFORM_ESP32:
+            if self.platform == KISS.PLATFORM_ESP32 or self.platform == KISS.PLATFORM_NRF52:
                 self.display = True
 
         if not self.firmware_ok:
@@ -1242,6 +1252,12 @@ class RNodeInterface(Interface):
                             elif (byte == KISS.ERROR_TXFAILED):
                                 RNS.log(str(self)+" hardware TX error (code "+RNS.hexrep(byte)+")", RNS.LOG_ERROR)
                                 raise IOError("Hardware transmit failure")
+                            elif (byte == KISS.ERROR_MEMORY_LOW):
+                                RNS.log(str(self)+" hardware error (code "+RNS.hexrep(byte)+"): Memory exhausted", RNS.LOG_ERROR)
+                                self.hw_errors.append({"error": KISS.ERROR_MEMORY_LOW, "description": "Memory exhausted on connected device"})
+                            elif (byte == KISS.ERROR_MODEM_TIMEOUT):
+                                RNS.log(str(self)+" hardware error (code "+RNS.hexrep(byte)+"): Modem communication timed out", RNS.LOG_ERROR)
+                                self.hw_errors.append({"error": KISS.ERROR_MODEM_TIMEOUT, "description": "Modem communication timed out on connected device"})
                             else:
                                 RNS.log(str(self)+" hardware error (code "+RNS.hexrep(byte)+")", RNS.LOG_ERROR)
                                 raise IOError("Unknown hardware failure")

RNS/Interfaces/LocalInterface.py

@@ -176,8 +176,8 @@ class LocalClientInterface(Interface):
                         self.send_lock = Lock()
 
                     with self.send_lock:
+                        # RNS.log(f"Simulating latency of {RNS.prettytime(s)} for {len(data)} bytes", RNS.LOG_EXTREME)
                         s = len(data) / self.bitrate * 8
-                        RNS.log(f"Simulating latency of {RNS.prettytime(s)} for {len(data)} bytes")
                         time.sleep(s)
 
                 data = bytes([HDLC.FLAG])+HDLC.escape(data)+bytes([HDLC.FLAG])

RNS/Interfaces/RNodeInterface.py

@@ -78,9 +78,13 @@ class KISS():
     ERROR_INITRADIO     = 0x01
     ERROR_TXFAILED      = 0x02
     ERROR_EEPROM_LOCKED = 0x03
+    ERROR_QUEUE_FULL    = 0x04
+    ERROR_MEMORY_LOW    = 0x05
+    ERROR_MODEM_TIMEOUT = 0x06
 
     PLATFORM_AVR   = 0x90
     PLATFORM_ESP32 = 0x80
+    PLATFORM_NRF52 = 0x70
 
     @staticmethod
     def escape(data):
@@ -286,6 +290,11 @@ class RNodeInterface(Interface):
         
         else:
             RNS.log(f"Opening BLE connection for {self}...")
+            if self.ble != None and self.ble.running == False:
+                self.ble.close()
+                self.ble.cleanup()
+                self.ble = None
+
             if self.ble == None:
                 self.ble = BLEConnection(owner=self, target_name=self.ble_name, target_bt_addr=self.ble_addr)
                 self.serial = self.ble
@@ -294,8 +303,7 @@ class RNodeInterface(Interface):
             while not self.ble.connected and time.time() < open_time + self.ble.CONNECT_TIMEOUT:
                 time.sleep(1)
 
-
-    def configure_device(self):
+    def reset_radio_state(self):
         self.r_frequency = None
         self.r_bandwidth = None
         self.r_txpower   = None
@@ -303,6 +311,10 @@ class RNodeInterface(Interface):
         self.r_cr        = None
         self.r_state     = None
         self.r_lock      = None
+        self.detected    = False
+
+    def configure_device(self):
+        self.reset_radio_state()
         sleep(2.0)
 
         thread = threading.Thread(target=self.readLoop)
@@ -326,7 +338,7 @@ class RNodeInterface(Interface):
             RNS.log("Could not detect device for "+str(self), RNS.LOG_ERROR)
             self.serial.close()
         else:
-            if self.platform == KISS.PLATFORM_ESP32:
+            if self.platform == KISS.PLATFORM_ESP32 or self.platform == KISS.PLATFORM_NRF52:
                 self.display = True
 
         RNS.log("Serial port "+self.port+" is now open")
@@ -491,9 +503,12 @@ class RNodeInterface(Interface):
             raise IOError("An IO error occurred while configuring radio state for "+str(self))
 
     def validate_firmware(self):
-        if (self.maj_version >= RNodeInterface.REQUIRED_FW_VER_MAJ):
-            if (self.min_version >= RNodeInterface.REQUIRED_FW_VER_MIN):
-                self.firmware_ok = True
+        if (self.maj_version > RNodeInterface.REQUIRED_FW_VER_MAJ):
+            self.firmware_ok = True
+        else:
+            if (self.maj_version >= RNodeInterface.REQUIRED_FW_VER_MAJ):
+                if (self.min_version >= RNodeInterface.REQUIRED_FW_VER_MIN):
+                    self.firmware_ok = True
         
         if self.firmware_ok:
             return
@@ -506,7 +521,14 @@ class RNodeInterface(Interface):
 
     def validateRadioState(self):
         RNS.log("Waiting for radio configuration validation for "+str(self)+"...", RNS.LOG_VERBOSE)
-        sleep(0.25);
+        if self.use_ble:
+            sleep(1.00)
+        else:
+            sleep(0.25)
+
+        if self.use_ble and self.ble != None and self.ble.device_disappeared:
+            RNS.log(f"Device disappeared during radio state validation for {self}", RNS.LOG_ERROR)
+            return False
 
         self.validcfg = True
         if (self.r_frequency != None and abs(self.frequency - int(self.r_frequency)) > 100):
@@ -841,6 +863,12 @@ class RNodeInterface(Interface):
                             elif (byte == KISS.ERROR_TXFAILED):
                                 RNS.log(str(self)+" hardware TX error (code "+RNS.hexrep(byte)+")", RNS.LOG_ERROR)
                                 raise IOError("Hardware transmit failure")
+                            elif (byte == KISS.ERROR_MEMORY_LOW):
+                                RNS.log(str(self)+" hardware error (code "+RNS.hexrep(byte)+"): Memory exhausted", RNS.LOG_ERROR)
+                                self.hw_errors.append({"error": KISS.ERROR_MEMORY_LOW, "description": "Memory exhausted on connected device"})
+                            elif (byte == KISS.ERROR_MODEM_TIMEOUT):
+                                RNS.log(str(self)+" hardware error (code "+RNS.hexrep(byte)+"): Modem communication timed out", RNS.LOG_ERROR)
+                                self.hw_errors.append({"error": KISS.ERROR_MODEM_TIMEOUT, "description": "Modem communication timed out on connected device"})
                             else:
                                 RNS.log(str(self)+" hardware error (code "+RNS.hexrep(byte)+")", RNS.LOG_ERROR)
                                 raise IOError("Unknown hardware failure")
@@ -997,11 +1025,13 @@ class BLEConnection():
         self.target_bt_addr = target_bt_addr
         self.scan_timeout = BLEConnection.SCAN_TIMEOUT
         self.ble_device = None
+        self.last_client = None
         self.connected = False
         self.running = False
         self.should_run = False
         self.must_disconnect = False
         self.connect_job_running = False
+        self.device_disappeared = False
 
         import importlib
         if BLEConnection.bleak == None:
@@ -1019,8 +1049,17 @@ class BLEConnection():
         self.should_run = True
         self.connection_thread = threading.Thread(target=self.connection_job, daemon=True).start()
 
+    def cleanup(self):
+        try:
+            if self.last_client != None:
+                self.asyncio.run(self.last_client.disconnect())
+        except Exception as e:
+            RNS.log(f"Error while disconnecting BLE device on cleanup for {self.owner}", RNS.LOG_ERROR)
+
+        self.should_run = False
+
     def connection_job(self):
-        while (self.should_run):
+        while self.should_run:
             if self.ble_device == None:
                 self.ble_device = self.find_target_device()
 
@@ -1030,6 +1069,10 @@ class BLEConnection():
 
             time.sleep(1)
 
+        self.cleanup()
+        self.running = False
+        RNS.log(f"BLE connection job for {self.owner} ended", RNS.LOG_DEBUG)
+
     def connect_device(self):
         if self.ble_device != None and type(self.ble_device) == self.bleak.backends.device.BLEDevice:
             RNS.log(f"Connecting BLE device {self.ble_device} for {self.owner}...", RNS.LOG_DEBUG)
@@ -1043,6 +1086,7 @@ class BLEConnection():
 
                     self.connected = True
                     self.ble_device = ble_client
+                    self.last_client = ble_client
                     self.owner.port = str(f"ble://{ble_client.address}")
 
                     loop = self.asyncio.get_running_loop()
@@ -1064,12 +1108,14 @@ class BLEConnection():
                 self.asyncio.run(connect_job())
             except Exception as e:
                 RNS.log(f"Could not connect BLE device {self.ble_device} for {self.owner}. Possibly missing authentication.", RNS.LOG_ERROR)
+
             self.connect_job_running = False
 
     def device_disconnected(self, device):
         RNS.log(f"BLE device for {self.owner} disconnected", RNS.LOG_NOTICE)
         self.connected = False
         self.ble_device = None
+        self.device_disappeared = True
 
     def find_target_device(self):
         RNS.log(f"Searching for attachable BLE device for {self.owner}...", RNS.LOG_EXTREME)
@@ -1093,7 +1139,13 @@ class BLEConnection():
 
             return False
 
-        device = self.asyncio.run(self.bleak.BleakScanner.find_device_by_filter(device_filter, timeout=self.scan_timeout))
+        device = None
+        try:
+            device = self.asyncio.run(self.bleak.BleakScanner.find_device_by_filter(device_filter, timeout=self.scan_timeout))
+        except Exception as e:
+            RNS.log(f"Error while finding BLE device for {self.owner}: {e}", RNS.LOG_ERROR)
+            self.should_run = False
+
         return device
 
     def device_bonded(self, device):

RNS/Interfaces/RNodeMultiInterface.py

@@ -70,7 +70,7 @@ class KISS():
     CMD_INT1_DATA   = 0x10
     CMD_INT2_DATA   = 0x20
     CMD_INT3_DATA   = 0x70
-    CMD_INT4_DATA   = 0x80
+    CMD_INT4_DATA   = 0x75
     CMD_INT5_DATA   = 0x90
     CMD_INT6_DATA   = 0xA0
     CMD_INT7_DATA   = 0xB0
@@ -82,8 +82,8 @@ class KISS():
     CMD_SEL_INT0    = 0x1E
     CMD_SEL_INT1    = 0x1F
     CMD_SEL_INT2    = 0x2F
-    CMD_SEL_INT3    = 0x7F
-    CMD_SEL_INT4    = 0x8F
+    CMD_SEL_INT3    = 0x74
+    CMD_SEL_INT4    = 0x7F
     CMD_SEL_INT5    = 0x9F
     CMD_SEL_INT6    = 0xAF
     CMD_SEL_INT7    = 0xBF
@@ -106,6 +106,7 @@ class KISS():
 
     PLATFORM_AVR   = 0x90
     PLATFORM_ESP32 = 0x80
+    PLATFORM_NRF52 = 0x70
 
     SX127X    = 0x00
     SX1276    = 0x01
@@ -166,7 +167,7 @@ class RNodeMultiInterface(Interface):
     CALLSIGN_MAX_LEN    = 32
 
     REQUIRED_FW_VER_MAJ = 1
-    REQUIRED_FW_VER_MIN = 73
+    REQUIRED_FW_VER_MIN = 74
 
     RECONNECT_WAIT = 5
 
@@ -249,6 +250,7 @@ class RNodeMultiInterface(Interface):
         if (not self.validcfg):
             raise ValueError("The configuration for "+str(self)+" contains errors, interface is offline")
 
+    def start(self):
         try:
             self.open_port()
 
@@ -297,7 +299,7 @@ class RNodeMultiInterface(Interface):
             RNS.log("Could not detect device for "+str(self), RNS.LOG_ERROR)
             self.serial.close()
         else:
-            if self.platform == KISS.PLATFORM_ESP32:
+            if self.platform == KISS.PLATFORM_ESP32 or self.platform == KISS.PLATFORM_NRF52:
                 self.display = True
 
         RNS.log("Serial port "+self.port+" is now open")
@@ -323,8 +325,8 @@ class RNodeMultiInterface(Interface):
                         lt_alock=subint[9]
                 )
 
-                interface.OUT = self.OUT
-                interface.IN  = self.IN
+                interface.OUT = subint[10]
+                interface.IN  = True
                 
                 interface.announce_rate_target = self.announce_rate_target
                 interface.mode = self.mode
@@ -1006,6 +1008,11 @@ class RNodeSubInterface(Interface):
         self.parent_interface = parent_interface
         self.announce_rate_target = None
 
+        self.mode = None
+        self.announce_cap = None
+        self.bitrate = None
+        self.ifac_size = None
+
         # add this interface to the subinterfaces array
         self.parent_interface.subinterfaces[index] = self
 

RNS/Packet.py

@@ -453,7 +453,7 @@ class PacketReceipt:
             # This is an explicit proof
             proof_hash = proof[:RNS.Identity.HASHLENGTH//8]
             signature = proof[RNS.Identity.HASHLENGTH//8:RNS.Identity.HASHLENGTH//8+RNS.Identity.SIGLENGTH//8]
-            if proof_hash == self.hash:
+            if proof_hash == self.hash and hasattr(self.destination, "identity") and self.destination.identity != None:
                 proof_valid = self.destination.identity.validate(signature, self.hash)
                 if proof_valid:
                     self.status = PacketReceipt.DELIVERED

RNS/Resource.py

@@ -54,6 +54,9 @@ class Resource:
     # The maximum window size for transfers on slow links
     WINDOW_MAX_SLOW      = 10
 
+    # The maximum window size for transfers on very slow links
+    WINDOW_MAX_VERY_SLOW = 4
+
     # The maximum window size for transfers on fast links
     WINDOW_MAX_FAST      = 75
     
@@ -65,12 +68,22 @@ class Resource:
     # rounds, the fast link window size will be allowed.
     FAST_RATE_THRESHOLD  = WINDOW_MAX_SLOW - WINDOW - 2
 
+    # If the very slow rate is sustained for this many request
+    # rounds, window will be capped to the very slow limit.
+    VERY_SLOW_RATE_THRESHOLD = 2
+
     # If the RTT rate is higher than this value,
     # the max window size for fast links will be used.
     # The default is 50 Kbps (the value is stored in
     # bytes per second, hence the "/ 8").
     RATE_FAST            = (50*1000) / 8
 
+    # If the RTT rate is lower than this value,
+    # the window size will be capped at .
+    # The default is 50 Kbps (the value is stored in
+    # bytes per second, hence the "/ 8").
+    RATE_VERY_SLOW       = (2*1000) / 8
+
     # The minimum allowed flexibility of the window size.
     # The difference between window_max and window_min
     # will never be smaller than this value.
@@ -105,6 +118,7 @@ class Resource:
 
     PART_TIMEOUT_FACTOR           = 4
     PART_TIMEOUT_FACTOR_AFTER_RTT = 2
+    PROOF_TIMEOUT_FACTOR          = 3
     MAX_RETRIES                   = 16
     MAX_ADV_RETRIES               = 4
     SENDER_GRACE_TIME             = 10.0
@@ -147,7 +161,7 @@ class Resource:
             resource.encrypted           = True if resource.flags & 0x01 else False
             resource.compressed          = True if resource.flags >> 1 & 0x01 else False
             resource.initiator           = False
-            resource.callback             = callback
+            resource.callback            = callback
             resource.__progress_callback = progress_callback
             resource.total_parts         = int(math.ceil(resource.size/float(Resource.SDU)))
             resource.received_count      = 0
@@ -220,7 +234,6 @@ class Resource:
                 data_size = os.stat(data.name).st_size
 
             self.total_size = data_size
-            self.grand_total_parts = math.ceil(data_size/Resource.SDU)
 
             if data_size <= Resource.MAX_EFFICIENT_SIZE:
                 self.total_segments = 1
@@ -241,7 +254,6 @@ class Resource:
 
         elif isinstance(data, bytes):
             data_size = len(data)
-            self.grand_total_parts = math.ceil(data_size/Resource.SDU)
             self.total_size  = data_size
             
             resource_data = data
@@ -275,6 +287,7 @@ class Resource:
         self.req_resp_rtt_rate = 0
         self.rtt_rxd_bytes_at_part_req = 0
         self.fast_rate_rounds = 0
+        self.very_slow_rate_rounds = 0
         self.request_id = request_id
         self.is_response = is_response
 
@@ -334,6 +347,7 @@ class Resource:
             self.size = len(self.data)
             self.sent_parts = 0
             hashmap_entries = int(math.ceil(self.size/float(Resource.SDU)))
+            self.total_parts = hashmap_entries
                 
             hashmap_ok = False
             while not hashmap_ok:
@@ -519,6 +533,10 @@ class Resource:
                         sleep_time = 0.001
 
             elif self.status == Resource.AWAITING_PROOF:
+                # Decrease timeout factor since proof packets are
+                # significantly smaller than full req/resp roundtrip
+                self.timeout_factor = Resource.PROOF_TIMEOUT_FACTOR
+
                 sleep_time = self.last_part_sent + (self.rtt*self.timeout_factor+self.sender_grace_time) - time.time()
                 if sleep_time < 0:
                     if self.retries_left <= 0:
@@ -610,6 +628,7 @@ class Resource:
                 proof_data = self.hash+proof
                 proof_packet = RNS.Packet(self.link, proof_data, packet_type=RNS.Packet.PROOF, context=RNS.Packet.RESOURCE_PRF)
                 proof_packet.send()
+                RNS.Transport.cache(proof_packet, force_cache=True)
             except Exception as e:
                 RNS.log("Could not send proof packet, cancelling resource", RNS.LOG_DEBUG)
                 RNS.log("The contained exception was: "+str(e), RNS.LOG_DEBUG)
@@ -759,6 +778,12 @@ class Resource:
                                 if self.fast_rate_rounds == Resource.FAST_RATE_THRESHOLD:
                                     self.window_max = Resource.WINDOW_MAX_FAST
 
+                            if self.fast_rate_rounds == 0 and self.req_data_rtt_rate < Resource.RATE_VERY_SLOW and self.very_slow_rate_rounds < Resource.VERY_SLOW_RATE_THRESHOLD:
+                                self.very_slow_rate_rounds += 1
+
+                                if self.very_slow_rate_rounds == Resource.VERY_SLOW_RATE_THRESHOLD:
+                                    self.window_max = Resource.WINDOW_MAX_VERY_SLOW
+
                     self.request_next()
             else:
                 self.receiving_part = False
@@ -900,6 +925,7 @@ class Resource:
 
             if self.sent_parts == len(self.parts):
                 self.status = Resource.AWAITING_PROOF
+                self.retries_left = 3
 
             if self.__progress_callback != None:
                 try:
@@ -943,21 +969,68 @@ class Resource:
         """
         if self.status == RNS.Resource.COMPLETE and self.segment_index == self.total_segments:
             return 1.0
+        
         elif self.initiator:
-            self.processed_parts  = (self.segment_index-1)*math.ceil(Resource.MAX_EFFICIENT_SIZE/Resource.SDU)
-            self.processed_parts += self.sent_parts
-            self.progress_total_parts = float(self.grand_total_parts)
-        else:
-            self.processed_parts  = (self.segment_index-1)*math.ceil(Resource.MAX_EFFICIENT_SIZE/Resource.SDU)            
-            self.processed_parts += self.received_count
-            if self.split:
-                self.progress_total_parts = float(math.ceil(self.total_size/Resource.SDU))
-            else:
+            if not self.split:
+                self.processed_parts = self.sent_parts
                 self.progress_total_parts = float(self.total_parts)
 
+            else:
+                is_last_segment = self.segment_index != self.total_segments
+                total_segments = self.total_segments
+                processed_segments = self.segment_index-1
+
+                current_segment_parts = self.total_parts
+                max_parts_per_segment = math.ceil(Resource.MAX_EFFICIENT_SIZE/Resource.SDU)
+
+                previously_processed_parts = processed_segments*max_parts_per_segment
+
+                if current_segment_parts < max_parts_per_segment:
+                    current_segment_factor = max_parts_per_segment / current_segment_parts
+                else:
+                    current_segment_factor = 1
+
+                self.processed_parts = previously_processed_parts + self.sent_parts*current_segment_factor
+                self.progress_total_parts = self.total_segments*max_parts_per_segment
+
+        else:
+            if not self.split:
+                self.processed_parts = self.received_count
+                self.progress_total_parts = float(self.total_parts)
+
+            else:
+                is_last_segment = self.segment_index != self.total_segments
+                total_segments = self.total_segments
+                processed_segments = self.segment_index-1
+
+                current_segment_parts = self.total_parts
+                max_parts_per_segment = math.ceil(Resource.MAX_EFFICIENT_SIZE/Resource.SDU)
+
+                previously_processed_parts = processed_segments*max_parts_per_segment
+
+                if current_segment_parts < max_parts_per_segment:
+                    current_segment_factor = max_parts_per_segment / current_segment_parts
+                else:
+                    current_segment_factor = 1
+
+                self.processed_parts = previously_processed_parts + self.received_count*current_segment_factor
+                self.progress_total_parts = self.total_segments*max_parts_per_segment
+
+
         progress = min(1.0, self.processed_parts / self.progress_total_parts)
         return progress
 
+    def get_segment_progress(self):
+        if self.status == RNS.Resource.COMPLETE and self.segment_index == self.total_segments:
+            return 1.0
+        elif self.initiator:
+            processed_parts = self.sent_parts
+        else:
+            processed_parts = self.received_count
+
+        progress = min(1.0, processed_parts / self.total_parts)
+        return progress
+
     def get_transfer_size(self):
         """
         :returns: The number of bytes needed to transfer the resource.

RNS/Reticulum.py

@@ -29,6 +29,7 @@ if get_platform() == "android":
     from .Interfaces import TCPInterface
     from .Interfaces import UDPInterface
     from .Interfaces import I2PInterface
+    from .Interfaces import RNodeMultiInterface
     from .Interfaces.Android import RNodeInterface
     from .Interfaces.Android import SerialInterface
     from .Interfaces.Android import KISSInterface
@@ -991,7 +992,7 @@ class Reticulum:
                                                 enabled_count += 1
 
                                     # Create an array with a row for each subinterface
-                                    subint_config = [[0 for x in range(10)] for y in range(enabled_count)]
+                                    subint_config = [[0 for x in range(11)] for y in range(enabled_count)]
                                     subint_index = 0
 
                                     for subinterface in c:
@@ -1020,6 +1021,11 @@ class Reticulum:
                                                 subint_config[subint_index][8] = st_alock
                                                 lt_alock = float(subinterface_config["airtime_limit_long"]) if "airtime_limit_long" in subinterface_config else None
                                                 subint_config[subint_index][9] = lt_alock
+
+                                                if "outgoing" in subinterface_config and subinterface_config.as_bool("outgoing") == False:
+                                                    subint_config[subint_index][10] = False
+                                                else:
+                                                    subint_config[subint_index][10] = True
                                                 subint_index += 1
 
                                     # if no subinterfaces are defined
@@ -1045,10 +1051,8 @@ class Reticulum:
                                         id_callsign = id_callsign
                                     )
 
-                                    if "outgoing" in c and c.as_bool("outgoing") == False:
-                                        interface.OUT = False
-                                    else:
-                                        interface.OUT = True
+                                    interface.IN = False
+                                    interface.OUT = False
 
                                     interface.mode = interface_mode
 
@@ -1099,6 +1103,9 @@ class Reticulum:
 
                                     RNS.Transport.interfaces.append(interface)
 
+                                    if isinstance(interface, RNS.Interfaces.RNodeMultiInterface.RNodeMultiInterface):
+                                        interface.start()
+
                             else:
                                 RNS.log("Skipping disabled interface \""+name+"\"", RNS.LOG_DEBUG)
 
@@ -1321,7 +1328,7 @@ class Reticulum:
 
                 if hasattr(interface, "r_battery_state"):
                     if interface.r_battery_state != 0x00:
-                        ifstats["battery_state"] = interface.r_battery_state
+                        ifstats["battery_state"] = interface.get_battery_state_string()
 
                     if hasattr(interface, "r_battery_percent"):
                         ifstats["battery_percent"] = interface.r_battery_percent

RNS/Transport.py

@@ -65,7 +65,7 @@ class Transport:
 
     PATH_REQUEST_TIMEOUT        = 15           # Default timuout for client path requests in seconds
     PATH_REQUEST_GRACE          = 0.4          # Grace time before a path announcement is made, allows directly reachable peers to respond first
-    PATH_REQUEST_RG             = 0.6          # Extra grace time for roaming-mode interfaces to allow more suitable peers to respond first
+    PATH_REQUEST_RG             = 1.5          # Extra grace time for roaming-mode interfaces to allow more suitable peers to respond first
     PATH_REQUEST_MI             = 20           # Minimum interval in seconds for automated path requests
 
     STATE_UNKNOWN               = 0x00
@@ -1738,7 +1738,16 @@ class Transport:
                         if link.link_id == packet.destination_hash:
                             if link.attached_interface == packet.receiving_interface:
                                 packet.link = link
-                                link.receive(packet)
+                                if packet.context == RNS.Packet.CACHE_REQUEST:
+                                    cached_packet = Transport.get_cached_packet(packet.data)
+                                    if cached_packet != None:
+                                        cached_packet.unpack()
+                                        RNS.Packet(destination=link, data=cached_packet.data,
+                                                   packet_type=cached_packet.packet_type, context=cached_packet.context).send()
+
+                                    Transport.jobs_locked = False
+                                else:
+                                    link.receive(packet)
                             else:
                                 # In the strange and rare case that an interface
                                 # is partly malfunctioning, and a link-associated

RNS/Utilities/rncp.py

@@ -35,13 +35,18 @@ APP_NAME = "rncp"
 allow_all = False
 allow_fetch = False
 fetch_jail = None
+save_path = None
+show_phy_rates = False
 allowed_identity_hashes = []
 
 REQ_FETCH_NOT_ALLOWED = 0xF0
 
+es = " "
+erase_str = "\33[2K\r"
+
 def listen(configdir, verbosity = 0, quietness = 0, allowed = [], display_identity = False,
-           limit = None, disable_auth = None, fetch_allowed = False, jail = None, announce = False):
-    global allow_all, allow_fetch, allowed_identity_hashes, fetch_jail
+           limit = None, disable_auth = None, fetch_allowed = False, jail = None, save = None, announce = False):
+    global allow_all, allow_fetch, allowed_identity_hashes, fetch_jail, save_path
     from tempfile import TemporaryFile
 
     allow_fetch = fetch_allowed
@@ -56,6 +61,20 @@ def listen(configdir, verbosity = 0, quietness = 0, allowed = [], display_identi
         fetch_jail = os.path.abspath(os.path.expanduser(jail))
         RNS.log("Restricting fetch requests to paths under \""+fetch_jail+"\"", RNS.LOG_VERBOSE)
 
+    if save != None:
+        sp = os.path.abspath(os.path.expanduser(save))
+        if os.path.isdir(sp):
+            if os.access(sp, os.W_OK):
+                save_path = sp
+            else:
+                RNS.log("Output directory not writable", RNS.LOG_ERROR)
+                exit(4)
+        else:
+            RNS.log("Output directory not found", RNS.LOG_ERROR)
+            exit(3)
+
+        RNS.log("Saving received files in \""+save_path+"\"", RNS.LOG_VERBOSE)
+
     identity_path = RNS.Reticulum.identitypath+"/"+APP_NAME
     if os.path.isfile(identity_path):
         identity = RNS.Identity.from_file(identity_path)                
@@ -130,10 +149,15 @@ def listen(configdir, verbosity = 0, quietness = 0, allowed = [], display_identi
         if not allow_fetch:
             return REQ_FETCH_NOT_ALLOWED
 
-        file_path = os.path.abspath(os.path.expanduser(data))
         if fetch_jail:
-            if not file_path.startswith(jail):
+            if data.startswith(fetch_jail+"/"):
+                data = data.replace(fetch_jail+"/", "")
+            file_path = os.path.abspath(os.path.expanduser(f"{fetch_jail}/{data}"))
+            if not file_path.startswith(fetch_jail+"/"):
+                RNS.log(f"Disallowing fetch request for {file_path} outside of fetch jail {fetch_jail}", RNS.LOG_WARNING)
                 return REQ_FETCH_NOT_ALLOWED
+        else:
+            file_path = os.path.abspath(os.path.expanduser(f"{data}"))
 
         target_link = None
         for link in RNS.Transport.active_links:
@@ -168,7 +192,13 @@ def listen(configdir, verbosity = 0, quietness = 0, allowed = [], display_identi
 
 
     destination.set_link_established_callback(client_link_established)
-    destination.register_request_handler("fetch_file", response_generator=fetch_request, allow=RNS.Destination.ALLOW_LIST, allowed_list=allowed_identity_hashes)
+    if allow_fetch:
+        if allow_all:
+            RNS.log("Allowing unauthenticated fetch requests", RNS.LOG_WARNING)
+            destination.register_request_handler("fetch_file", response_generator=fetch_request, allow=RNS.Destination.ALLOW_ALL)
+        else:
+            destination.register_request_handler("fetch_file", response_generator=fetch_request, allow=RNS.Destination.ALLOW_LIST, allowed_list=allowed_identity_hashes)
+
     print("rncp listening on "+RNS.prettyhexrep(destination.hash))
 
     if announce >= 0:
@@ -227,6 +257,7 @@ def receive_resource_started(resource):
     print("Starting resource transfer "+RNS.prettyhexrep(resource.hash)+id_str)
 
 def receive_resource_concluded(resource):
+    global save_path
     if resource.status == RNS.Resource.COMPLETE:
         print(str(resource)+" completed")
 
@@ -235,12 +266,20 @@ def receive_resource_concluded(resource):
             filename = resource.data.read(filename_len).decode("utf-8")
 
             counter = 0
-            saved_filename = filename
-            while os.path.isfile(saved_filename):
+            if save_path:
+                saved_filename = os.path.abspath(os.path.expanduser(save_path+"/"+filename))
+                if not saved_filename.startswith(save_path+"/"):
+                    RNS.log(f"Invalid save path {saved_filename}, ignoring", RNS.LOG_ERROR)
+                    return
+            else:
+                saved_filename = filename
+
+            full_save_path = saved_filename
+            while os.path.isfile(full_save_path):
                 counter += 1
-                saved_filename = filename+"."+str(counter)
+                full_save_path = saved_filename+"."+str(counter)
             
-            file = open(saved_filename, "wb")
+            file = open(full_save_path, "wb")
             file.write(resource.data.read())
             file.close()
 
@@ -254,33 +293,57 @@ resource_done = False
 current_resource = None
 stats = []
 speed = 0.0
+phy_speed = 0.0
 def sender_progress(resource):
     stats_max = 32
-    global current_resource, stats, speed, resource_done
+    global current_resource, stats, speed, phy_speed, resource_done
     current_resource = resource
+    
     now = time.time()
-    got = current_resource.get_progress()*current_resource.total_size
-    entry = [now, got]
+    got = current_resource.get_progress()*current_resource.get_data_size()
+    phy_got = current_resource.get_segment_progress()*current_resource.get_transfer_size()
+    
+    entry = [now, got, phy_got]
     stats.append(entry)
+
     while len(stats) > stats_max:
         stats.pop(0)
 
     span = now - stats[0][0]
     if span == 0:
         speed = 0
+        phy_speed = 0
+    
     else:
         diff = got - stats[0][1]
         speed = diff/span
 
+        phy_diff = phy_got - stats[0][2]
+        if phy_diff > 0:
+            phy_speed = phy_diff/span
+
     if resource.status < RNS.Resource.COMPLETE:
         resource_done = False
     else:
         resource_done = True
 
 link = None
-def fetch(configdir, verbosity = 0, quietness = 0, destination = None, file = None, timeout = RNS.Transport.PATH_REQUEST_TIMEOUT, silent=False):
-    global current_resource, resource_done, link, speed
+def fetch(configdir, verbosity = 0, quietness = 0, destination = None, file = None, timeout = RNS.Transport.PATH_REQUEST_TIMEOUT, silent=False, phy_rates=False, save=None):
+    global current_resource, resource_done, link, speed, show_phy_rates, save_path
     targetloglevel = 3+verbosity-quietness
+    show_phy_rates = phy_rates
+
+    if save:
+        sp = os.path.abspath(os.path.expanduser(save))
+        if os.path.isdir(sp):
+            if os.access(sp, os.W_OK):
+                save_path = sp
+            else:
+                RNS.log("Output directory not writable", RNS.LOG_ERROR)
+                exit(4)
+        else:
+            RNS.log("Output directory not found", RNS.LOG_ERROR)
+            exit(3)
 
     try:
         dest_len = (RNS.Reticulum.TRUNCATED_HASHLENGTH//8)*2
@@ -315,7 +378,7 @@ def fetch(configdir, verbosity = 0, quietness = 0, destination = None, file = No
         if silent:
             print("Path to "+RNS.prettyhexrep(destination_hash)+" requested")
         else:
-            print("Path to "+RNS.prettyhexrep(destination_hash)+" requested  ", end=" ")
+            print("Path to "+RNS.prettyhexrep(destination_hash)+" requested  ", end=es)
         sys.stdout.flush()
 
     i = 0
@@ -332,13 +395,13 @@ def fetch(configdir, verbosity = 0, quietness = 0, destination = None, file = No
         if silent:
             print("Path not found")
         else:
-            print("\r                                                            \rPath not found")
+            print(f"{erase_str}Path not found")
         exit(1)
     else:
         if silent:
             print("Establishing link with "+RNS.prettyhexrep(destination_hash))
         else:
-            print("\r                                                            \rEstablishing link with "+RNS.prettyhexrep(destination_hash)+"  ", end=" ")
+            print(f"{erase_str}Establishing link with "+RNS.prettyhexrep(destination_hash)+"  ", end=es)
 
     listener_identity = RNS.Identity.recall(destination_hash)
     listener_destination = RNS.Destination(
@@ -361,13 +424,13 @@ def fetch(configdir, verbosity = 0, quietness = 0, destination = None, file = No
         if silent:
             print("Could not establish link with "+RNS.prettyhexrep(destination_hash))
         else:
-            print("\r                                                            \rCould not establish link with "+RNS.prettyhexrep(destination_hash))
+            print(f"{erase_str}Could not establish link with "+RNS.prettyhexrep(destination_hash))
         exit(1)
     else:
         if silent:
             print("Requesting file from remote...")
         else:
-            print("\r                                                            \rRequesting file from remote  ", end=" ")
+            print(f"{erase_str}Requesting file from remote  ", end=es)
 
     link.identify(identity)
 
@@ -402,18 +465,25 @@ def fetch(configdir, verbosity = 0, quietness = 0, destination = None, file = No
 
     def fetch_resource_concluded(resource):
         nonlocal resource_resolved, resource_status
+        global save_path
         if resource.status == RNS.Resource.COMPLETE:
             if resource.total_size > 4:
                 filename_len = int.from_bytes(resource.data.read(2), "big")
                 filename = resource.data.read(filename_len).decode("utf-8")
 
                 counter = 0
-                saved_filename = filename
-                while os.path.isfile(saved_filename):
+                if save_path:
+                    saved_filename = os.path.abspath(os.path.expanduser(save_path+"/"+filename))
+
+                else:
+                    saved_filename = filename
+
+                full_save_path = saved_filename
+                while os.path.isfile(full_save_path):
                     counter += 1
-                    saved_filename = filename+"."+str(counter)
-                
-                file = open(saved_filename, "wb")
+                    full_save_path = saved_filename+"."+str(counter)
+ 
+                file = open(full_save_path, "wb")
                 file.write(resource.data.read())
                 file.close()
                 resource_status = "completed"
@@ -442,31 +512,31 @@ def fetch(configdir, verbosity = 0, quietness = 0, destination = None, file = No
             i = (i+1)%len(syms)
 
     if request_status == "fetch_not_allowed":
-        if not silent: print("\r                                                            \r", end="")
+        if not silent: print(f"{erase_str}", end="")
         print("Fetch request failed, fetching the file "+str(file)+" was not allowed by the remote")
         link.teardown()
         time.sleep(0.15)
         exit(0)
     elif request_status == "not_found":
-        if not silent: print("\r                                                            \r", end="")
+        if not silent: print(f"{erase_str}", end="")
         print("Fetch request failed, the file "+str(file)+" was not found on the remote")
         link.teardown()
         time.sleep(0.15)
         exit(0)
     elif request_status == "remote_error":
-        if not silent: print("\r                                                            \r", end="")
+        if not silent: print(f"{erase_str}", end="")
         print("Fetch request failed due to an error on the remote system")
         link.teardown()
         time.sleep(0.15)
         exit(0)
     elif request_status == "unknown":
-        if not silent: print("\r                                                            \r", end="")
+        if not silent: print(f"{erase_str}", end="")
         print("Fetch request failed due to an unknown error (probably not authorised)")
         link.teardown()
         time.sleep(0.15)
         exit(0)
     elif request_status == "found":
-        if not silent: print("\r                                                            \r", end="")
+        if not silent: print(f"{erase_str}", end="")
 
     while not resource_resolved:
         if not silent:
@@ -474,13 +544,21 @@ def fetch(configdir, verbosity = 0, quietness = 0, destination = None, file = No
             if current_resource:
                 prg = current_resource.get_progress()
                 percent = round(prg * 100.0, 1)
-                stat_str = str(percent)+"% - " + size_str(int(prg*current_resource.total_size)) + " of " + size_str(current_resource.total_size) + " - " +size_str(speed, "b")+"ps"
-                if prg != 1.0:
-                    print("\r                                                                                  \rTransferring file "+syms[i]+" "+stat_str, end=" ")
+                if show_phy_rates:
+                    pss = size_str(phy_speed, "b")
+                    phy_str = f" ({pss}ps at physical layer)"
                 else:
-                    print("\r                                                                                  \rTransfer complete  "+stat_str, end=" ")
+                    phy_str = ""
+                ps = size_str(int(prg*current_resource.total_size))
+                ts = size_str(current_resource.total_size)
+                ss = size_str(speed, "b")
+                stat_str = f"{percent}% - {ps} of {ts} - {ss}ps{phy_str}"
+                if prg != 1.0:
+                    print(f"{erase_str}Transferring file {syms[i]} {stat_str}", end=es)
+                else:
+                    print(f"{erase_str}Transfer complete  {stat_str}", end=es)
             else:
-                print("\r                                                                                  \rWaiting for transfer to start "+syms[i]+" ", end=" ")
+                print(f"{erase_str}Waiting for transfer to start {syms[i]} ", end=es)
             sys.stdout.flush()
             i = (i+1)%len(syms)
 
@@ -488,13 +566,12 @@ def fetch(configdir, verbosity = 0, quietness = 0, destination = None, file = No
         if silent:
             print("The transfer failed")
         else:
-            print("\r                                                            \rThe transfer failed")
+            print(f"{erase_str}The transfer failed")
         exit(1)
     else:
         if silent:
             print(str(file)+" fetched from "+RNS.prettyhexrep(destination_hash))
         else:
-            #print("\r                                                                                  \r"+str(file)+" fetched from "+RNS.prettyhexrep(destination_hash))
             print("\n"+str(file)+" fetched from "+RNS.prettyhexrep(destination_hash))
         link.teardown()
         time.sleep(0.15)
@@ -504,10 +581,11 @@ def fetch(configdir, verbosity = 0, quietness = 0, destination = None, file = No
     exit(0)
 
 
-def send(configdir, verbosity = 0, quietness = 0, destination = None, file = None, timeout = RNS.Transport.PATH_REQUEST_TIMEOUT, silent=False):
-    global current_resource, resource_done, link, speed
+def send(configdir, verbosity = 0, quietness = 0, destination = None, file = None, timeout = RNS.Transport.PATH_REQUEST_TIMEOUT, silent=False, phy_rates=False):
+    global current_resource, resource_done, link, speed, show_phy_rates
     from tempfile import TemporaryFile
     targetloglevel = 3+verbosity-quietness
+    show_phy_rates = phy_rates
 
     try:
         dest_len = (RNS.Reticulum.TRUNCATED_HASHLENGTH//8)*2
@@ -536,14 +614,14 @@ def send(configdir, verbosity = 0, quietness = 0, destination = None, file = Non
         print("Filename exceeds max size, cannot send")
         exit(1)
     else:
-        print("Preparing file...", end=" ")
+        print("Preparing file...", end=es)
 
     temp_file.write(filename_len.to_bytes(2, "big"))
     temp_file.write(filename_bytes)
     temp_file.write(real_file.read())
     temp_file.seek(0)
 
-    print("\r                                                            \r", end="")
+    print(f"{erase_str}", end="")
 
     reticulum = RNS.Reticulum(configdir=configdir, loglevel=targetloglevel)
 
@@ -566,7 +644,7 @@ def send(configdir, verbosity = 0, quietness = 0, destination = None, file = Non
         if silent:
             print("Path to "+RNS.prettyhexrep(destination_hash)+" requested")
         else:
-            print("Path to "+RNS.prettyhexrep(destination_hash)+" requested  ", end=" ")
+            print("Path to "+RNS.prettyhexrep(destination_hash)+" requested  ", end=es)
         sys.stdout.flush()
 
     i = 0
@@ -583,13 +661,13 @@ def send(configdir, verbosity = 0, quietness = 0, destination = None, file = Non
         if silent:
             print("Path not found")
         else:
-            print("\r                                                            \rPath not found")
+            print(f"{erase_str}Path not found")
         exit(1)
     else:
         if silent:
             print("Establishing link with "+RNS.prettyhexrep(destination_hash))
         else:
-            print("\r                                                            \rEstablishing link with "+RNS.prettyhexrep(destination_hash)+" ", end=" ")
+            print(f"{erase_str}Establishing link with "+RNS.prettyhexrep(destination_hash)+" ", end=es)
 
     receiver_identity = RNS.Identity.recall(destination_hash)
     receiver_destination = RNS.Destination(
@@ -612,19 +690,19 @@ def send(configdir, verbosity = 0, quietness = 0, destination = None, file = Non
         if silent:
             print("Link establishment with "+RNS.prettyhexrep(destination_hash)+" timed out")
         else:
-            print("\r                                                            \rLink establishment with "+RNS.prettyhexrep(destination_hash)+" timed out")
+            print(f"{erase_str}Link establishment with "+RNS.prettyhexrep(destination_hash)+" timed out")
         exit(1)
     elif not RNS.Transport.has_path(destination_hash):
         if silent:
             print("No path found to "+RNS.prettyhexrep(destination_hash))
         else:
-            print("\r                                                            \rNo path found to "+RNS.prettyhexrep(destination_hash))
+            print(f"{erase_str}No path found to "+RNS.prettyhexrep(destination_hash))
         exit(1)
     else:
         if silent:
             print("Advertising file resource...")
         else:
-            print("\r                                                            \rAdvertising file resource  ", end=" ")
+            print(f"{erase_str}Advertising file resource  ", end=es)
 
     link.identify(identity)
     resource = RNS.Resource(temp_file, link, callback = sender_progress, progress_callback = sender_progress)
@@ -642,23 +720,32 @@ def send(configdir, verbosity = 0, quietness = 0, destination = None, file = Non
         if silent:
             print("File was not accepted by "+RNS.prettyhexrep(destination_hash))
         else:
-            print("\r                                                            \rFile was not accepted by "+RNS.prettyhexrep(destination_hash))
+            print(f"{erase_str}File was not accepted by "+RNS.prettyhexrep(destination_hash))
         exit(1)
     else:
         if silent:
             print("Transferring file...")
         else:
-            print("\r                                                            \rTransferring file  ", end=" ")
+            print(f"{erase_str}Transferring file  ", end=es)
 
     def progress_update(i, done=False):
         time.sleep(0.1)
         prg = current_resource.get_progress()
         percent = round(prg * 100.0, 1)
-        stat_str = str(percent)+"% - " + size_str(int(prg*current_resource.total_size)) + " of " + size_str(current_resource.total_size) + " - " +size_str(speed, "b")+"ps"
-        if not done:
-            print("\r                                                                                  \rTransferring file "+syms[i]+" "+stat_str, end=" ")
+        if show_phy_rates:
+            pss = size_str(phy_speed, "b")
+            phy_str = f" ({pss}ps at physical layer)"
         else:
-            print("\r                                                                                  \rTransfer complete  "+stat_str, end=" ")
+            phy_str = ""
+        es = "  "
+        cs = size_str(int(prg*current_resource.total_size))
+        ts = size_str(current_resource.total_size)
+        ss = size_str(speed, "b")
+        stat_str = f"{percent}% - {cs} of {ts} - {ss}ps{phy_str}"
+        if not done:
+            print(f"{erase_str}Transferring file "+syms[i]+" "+stat_str, end=es)
+        else:
+            print(f"{erase_str}Transfer complete  "+stat_str, end=es)
         sys.stdout.flush()
         i = (i+1)%len(syms)
         return i
@@ -674,13 +761,12 @@ def send(configdir, verbosity = 0, quietness = 0, destination = None, file = Non
         if silent:
             print("The transfer failed")
         else:
-            print("\r                                                            \rThe transfer failed")
+            print(f"{erase_str}The transfer failed")
         exit(1)
     else:
         if silent:
             print(str(file_path)+" copied to "+RNS.prettyhexrep(destination_hash))
         else:
-            # print("\r                                                                                  \r"+str(file_path)+" copied to "+RNS.prettyhexrep(destination_hash))
             print("\n"+str(file_path)+" copied to "+RNS.prettyhexrep(destination_hash))
         link.teardown()
         time.sleep(0.25)
@@ -701,11 +787,13 @@ def main():
         parser.add_argument("-F", '--allow-fetch', action='store_true', default=False, help="allow authenticated clients to fetch files")
         parser.add_argument("-f", '--fetch', action='store_true', default=False, help="fetch file from remote listener instead of sending")
         parser.add_argument("-j", "--jail", metavar="path", action="store", default=None, help="restrict fetch requests to specified path", type=str)
+        parser.add_argument("-s", "--save", metavar="path", action="store", default=None, help="save received files in specified path", type=str)
         parser.add_argument("-b", action='store', metavar="seconds", default=-1, help="announce interval, 0 to only announce at startup", type=int)
-        parser.add_argument('-a', metavar="allowed_hash", dest="allowed", action='append', help="allow this identity", type=str)
+        parser.add_argument('-a', metavar="allowed_hash", dest="allowed", action='append', help="allow this identity (or add in ~/.rncp/allowed_identities)", type=str)
         parser.add_argument('-n', '--no-auth', action='store_true', default=False, help="accept requests from anyone")
         parser.add_argument('-p', '--print-identity', action='store_true', default=False, help="print identity and destination info and exit")
         parser.add_argument("-w", action="store", metavar="seconds", type=float, help="sender timeout before giving up", default=RNS.Transport.PATH_REQUEST_TIMEOUT)
+        parser.add_argument('-P', '--phy-rates', action='store_true', default=False, help="display physical layer transfer rates")
         # parser.add_argument("--limit", action="store", metavar="files", type=float, help="maximum number of files to accept", default=None)
         parser.add_argument("--version", action="version", version="rncp {version}".format(version=__version__))
         
@@ -719,6 +807,7 @@ def main():
                 allowed = args.allowed,
                 fetch_allowed = args.allow_fetch,
                 jail = args.jail,
+                save = args.save,
                 display_identity=args.print_identity,
                 # limit=args.limit,
                 disable_auth=args.no_auth,
@@ -735,6 +824,8 @@ def main():
                     file = args.file,
                     timeout = args.w,
                     silent = args.silent,
+                    phy_rates = args.phy_rates,
+                    save = args.save,
                 )
             else:
                 print("")
@@ -750,6 +841,7 @@ def main():
                 file = args.file,
                 timeout = args.w,
                 silent = args.silent,
+                phy_rates = args.phy_rates,
             )
 
         else:

RNS/Utilities/rnodeconf.py

@@ -41,7 +41,7 @@ import RNS
 RNS.logtimefmt      = "%H:%M:%S"
 RNS.compact_log_fmt = True
 
-program_version = "2.1.3"
+program_version = "2.2.0"
 eth_addr = "0xFDabC71AC4c0C78C95aDDDe3B4FA19d6273c5E73"
 btc_addr = "35G9uWVzrpJJibzUwpNUQGQNFzLirhrYAH"
 xmr_addr = "87HcDx6jRSkMQ9nPRd5K9hGGpZLn2s7vWETjMaVM5KfV4TD36NcYa8J8WSxhTSvBzzFpqDwp2fg5GX2moZ7VAP9QMZCZGET"
@@ -139,6 +139,8 @@ class ROM():
     MODEL_A8       = 0xA8
     MODEL_A2       = 0xA2
     MODEL_A7       = 0xA7
+    MODEL_A5       = 0xA5
+    MODEL_AA       = 0xAA
 
     PRODUCT_T32_10 = 0xB2
     MODEL_BA       = 0xBA
@@ -169,6 +171,14 @@ class ROM():
     MODEL_E3       = 0xE3
     MODEL_E8       = 0xE8
 
+    PRODUCT_TBEAM_S_V1= 0xEA
+    MODEL_DB          = 0xDB
+    MODEL_DC          = 0xDC
+
+    PRODUCT_TDECK  = 0xD0
+    MODEL_D4       = 0xD4
+    MODEL_D9       = 0xD9
+
     PRODUCT_RAK4631 = 0x10
     MODEL_11       = 0x11
     MODEL_12       = 0x12
@@ -207,6 +217,7 @@ class ROM():
     BOARD_RNODE         = 0x31
     BOARD_HMBRW         = 0x32
     BOARD_TBEAM         = 0x33
+    BOARD_TDECK         = 0x3B
     BOARD_HUZZAH32      = 0x34
     BOARD_GENERIC_ESP32 = 0x35
     BOARD_LORA32_V2_0   = 0x36
@@ -214,13 +225,15 @@ class ROM():
     BOARD_TECHO         = 0x43
     BOARD_RAK4631       = 0x51
 
-    MANUAL_FLASH_MODELS = [MODEL_A1, MODEL_A6]
+    MANUAL_FLASH_MODELS = []
 
 mapped_product = ROM.PRODUCT_RNODE
 products = {
     ROM.PRODUCT_RNODE:  "RNode",
     ROM.PRODUCT_HMBRW:  "Hombrew RNode",
     ROM.PRODUCT_TBEAM:  "LilyGO T-Beam",
+    ROM.PRODUCT_TBEAM_S_V1:"LilyGO T-Beam Supreme",
+    ROM.PRODUCT_TDECK:  "LilyGO T-Deck",
     ROM.PRODUCT_T32_10: "LilyGO LoRa32 v1.0",
     ROM.PRODUCT_T32_20: "LilyGO LoRa32 v2.0",
     ROM.PRODUCT_T32_21: "LilyGO LoRa32 v2.1",
@@ -249,6 +262,8 @@ models = {
     0xA9: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware.hex", "SX1276"],
     0xA1: [410000000, 525000000, 22, "410 - 525 MHz", "rnode_firmware_t3s3.zip", "SX1268"],
     0xA6: [820000000, 1020000000, 22, "820 - 960 MHz", "rnode_firmware_t3s3.zip", "SX1262"],
+    0xA5: [410000000, 525000000, 17, "410 - 525 MHz", "rnode_firmware_t3s3_sx127x.zip", "SX1278"],
+    0xAA: [820000000, 1020000000, 17, "820 - 960 MHz", "rnode_firmware_t3s3_sx127x.zip", "SX1276"],
     0xA2: [410000000, 525000000, 17, "410 - 525 MHz", "rnode_firmware_ng21.zip", "SX1278"],
     0xA7: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware_ng21.zip", "SX1276"],
     0xA3: [410000000, 525000000, 17, "410 - 525 MHz", "rnode_firmware_ng20.zip", "SX1278"],
@@ -263,16 +278,20 @@ models = {
     0xBB: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v10.zip", "SX1276"],
     0xC4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_heltec32v2.zip", "SX1278"],
     0xC9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_heltec32v2.zip", "SX1276"],
-    0xC5: [470000000, 510000000, 21, "470 - 510 MHz", "rnode_firmware_heltec32v3.zip", "SX1262"],
-    0xCA: [863000000, 928000000, 21, "863 - 928 MHz", "rnode_firmware_heltec32v3.zip", "SX1262"],
+    0xC5: [420000000, 520000000, 21, "420 - 520 MHz", "rnode_firmware_heltec32v3.zip", "SX1262"],
+    0xCA: [850000000, 950000000, 21, "850 - 950 MHz", "rnode_firmware_heltec32v3.zip", "SX1262"],
     0xE4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_tbeam.zip", "SX1278"],
     0xE9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_tbeam.zip", "SX1276"],
+    0xD4: [420000000, 520000000, 22, "420 - 520 MHz", "rnode_firmware_tdeck.zip", "SX1268"],
+    0xD9: [850000000, 950000000, 22, "850 - 950 MHz", "rnode_firmware_tdeck.zip", "SX1262"],
+    0xDB: [420000000, 520000000, 22, "420 - 520 MHz", "rnode_firmware_tbeam_supreme.zip", "SX1268"],
+    0xDC: [850000000, 950000000, 22, "850 - 950 MHz", "rnode_firmware_tbeam_supreme.zip", "SX1262"],
     0xE3: [420000000, 520000000, 22, "420 - 520 MHz", "rnode_firmware_tbeam_sx1262.zip", "SX1268"],
     0xE8: [850000000, 950000000, 22, "850 - 950 MHz", "rnode_firmware_tbeam_sx1262.zip", "SX1262"],
     0x11: [430000000, 510000000, 22, "430 - 510 MHz", "rnode_firmware_rak4631.zip", "SX1262"],
     0x12: [779000000, 928000000, 22, "779 - 928 MHz", "rnode_firmware_rak4631.zip", "SX1262"],
-    0x11: [430000000, 510000000, 22, "430 - 510 MHz", "rnode_firmware_rak4631_sx1280.zip", "SX1262 + SX1280"],
-    0x12: [779000000, 928000000, 22, "779 - 928 MHz", "rnode_firmware_rak4631_sx1280.zip", "SX1262 + SX1280"],
+    0x13: [430000000, 510000000, 22, "430 - 510 MHz", "rnode_firmware_rak4631_sx1280.zip", "SX1262 + SX1280"],
+    0x14: [779000000, 928000000, 22, "779 - 928 MHz", "rnode_firmware_rak4631_sx1280.zip", "SX1262 + SX1280"],
     0x16: [779000000, 928000000, 22, "430 - 510 Mhz", "rnode_firmware_techo.zip", "SX1262"],
     0x17: [779000000, 928000000, 22, "779 - 928 Mhz", "rnode_firmware_techo.zip", "SX1262"],
     0x21: [820000000, 960000000, 22, "820 - 960 MHz", "rnode_firmware_opencom_xl.zip", "SX1262 + SX1280"],
@@ -1175,6 +1194,7 @@ def ensure_firmware_file(fw_filename):
                         pass
                     else:
                         RNS.log("")
+                        RNS.log(f"Firmware hash {file_hash} but should be {selected_hash}, possibly due to download corruption.")
                         RNS.log("Firmware corrupt. Try clearing the local firmware cache with: rnodeconf --clear-cache")
                         graceful_exit(96)
 
@@ -1640,6 +1660,8 @@ def main():
             print("[9] LilyGO LoRa T3S3")
             print("[10] RAK4631")
             print("[11] LilyGo T-Echo")
+            print("[12] LilyGO T-Beam Supreme")
+            print("[13] LilyGO T-Deck")
             print("       .")
             print("      / \\   Select one of these options if you want to easily turn")
             print("       |    a supported development board into an RNode.")
@@ -1651,7 +1673,7 @@ def main():
             try:
                 c_dev = int(input())
                 c_mod = False
-                if c_dev < 1 or c_dev > 11:
+                if c_dev < 1 or c_dev > 13:
                     raise ValueError()
                 elif c_dev == 1:
                     selected_product = ROM.PRODUCT_RNODE
@@ -1688,6 +1710,38 @@ def main():
                     print("who would like to experiment with it. Hit enter to continue.")
                     print("---------------------------------------------------------------------------")
                     input()
+                elif c_dev == 12:
+                    selected_product = ROM.PRODUCT_TBEAM_S_V1
+                    clear()
+                    print("")
+                    print("---------------------------------------------------------------------------")
+                    print("                       T-Beam Supreme RNode Installer")
+                    print("")
+                    print("The RNode firmware can currently be installed on T-Beam Supreme devices")
+                    print("using the SX1262 and SX1268 transceiver chips.")
+                    print("")
+                    print("Important! Using RNode firmware on T-Beam devices should currently be")
+                    print("considered experimental. It is not intended for production or critical use.")
+                    print("The currently supplied firmware is provided AS-IS as a courtesey to those")
+                    print("who would like to experiment with it. Hit enter to continue.")
+                    print("---------------------------------------------------------------------------")
+                    input()
+                elif c_dev == 13:
+                    selected_product = ROM.PRODUCT_TDECK
+                    clear()
+                    print("")
+                    print("---------------------------------------------------------------------------")
+                    print("                            T-Deck RNode Installer")
+                    print("")
+                    print("The RNode firmware can currently be installed on T-Deck devices using the")
+                    print("SX1262 and SX1268 transceiver chips.")
+                    print("")
+                    print("Important! Using RNode firmware on T-Beam devices should currently be")
+                    print("considered experimental. It is not intended for production or critical use.")
+                    print("The currently supplied firmware is provided AS-IS as a courtesey to those")
+                    print("who would like to experiment with it. Hit enter to continue.")
+                    print("---------------------------------------------------------------------------")
+                    input()
                 elif c_dev == 4:
                     selected_product = ROM.PRODUCT_T32_20
                     clear()
@@ -1758,8 +1812,6 @@ def main():
                     print("Important! Using RNode firmware on T3S3 devices should currently be")
                     print("considered experimental. It is not intended for production or critical use.")
                     print("")
-                    print("Please note that Bluetooth is currently not implemented on this board.")
-                    print("")
                     print("The currently supplied firmware is provided AS-IS as a courtesey to those")
                     print("who would like to experiment with it. Hit enter to continue.")
                     print("---------------------------------------------------------------------------")
@@ -1774,8 +1826,6 @@ def main():
                     print("Important! Using RNode firmware on Heltec devices should currently be")
                     print("considered experimental. It is not intended for production or critical use.")
                     print("")
-                    print("Please note that Bluetooth is currently not implemented on this board.")
-                    print("")
                     print("The currently supplied firmware is provided AS-IS as a courtesey to those")
                     print("who would like to experiment with it. Hit enter to continue.")
                     print("---------------------------------------------------------------------------")
@@ -1908,19 +1958,30 @@ def main():
                         print("That model does not exist, exiting now.")
                         graceful_exit()
                 else:
-                    print("\nWhat model is this T3S3?\n")
-                    print("[1] 410 - 525 MHz (with SX1268 chip)")
-                    print("[2] 820 - 1020 MHz (with SX1262 chip)")
+                    print("\nWhat band is this T3S3 for?\n")
+                    print("[1] 433 MHz         (with SX1278 chip)")
+                    print("[2] 868/915/923 MHz (with SX1276 chip)")
+                    print("");
+                    print("[3] 433 MHz         (with SX1268 chip)")
+                    print("[4] 868/915/923 MHz (with SX1262 chip)")
                     print("\n? ", end="")
                     try:
                         c_model = int(input())
-                        if c_model < 1 or c_model > 2:
+                        if c_model < 1 or c_model > 4:
                             raise ValueError()
                         elif c_model == 1:
-                            selected_model = ROM.MODEL_A1
+                            selected_model = ROM.MODEL_A5
                             selected_mcu = ROM.MCU_ESP32
                             selected_platform = ROM.PLATFORM_ESP32
                         elif c_model == 2:
+                            selected_model = ROM.MODEL_AA
+                            selected_mcu = ROM.MCU_ESP32
+                            selected_platform = ROM.PLATFORM_ESP32
+                        elif c_model == 3:
+                            selected_model = ROM.MODEL_A1
+                            selected_mcu = ROM.MCU_ESP32
+                            selected_platform = ROM.PLATFORM_ESP32
+                        elif c_model == 4:
                             selected_model = ROM.MODEL_A6
                             selected_mcu = ROM.MCU_ESP32
                             selected_platform = ROM.PLATFORM_ESP32
@@ -1957,6 +2018,46 @@ def main():
                     print("That band does not exist, exiting now.")
                     graceful_exit()
 
+            elif selected_product == ROM.PRODUCT_TBEAM_S_V1:
+                selected_mcu = ROM.MCU_ESP32
+                print("\nWhat band is this T-Beam Supreme for?\n")
+                print("[1] 433 MHz         (with SX1268 chip)")
+                print("[2] 868/915/923 MHz (with SX1262 chip)")
+                print("\n? ", end="")
+                try:
+                    c_model = int(input())
+                    if c_model < 1 or c_model > 2:
+                        raise ValueError()
+                    elif c_model == 1:
+                        selected_model = ROM.MODEL_DB
+                        selected_platform = ROM.PLATFORM_ESP32
+                    elif c_model == 2:
+                        selected_model = ROM.MODEL_DC
+                        selected_platform = ROM.PLATFORM_ESP32
+                except Exception as e:
+                    print("That band does not exist, exiting now.")
+                    graceful_exit()
+
+            elif selected_product == ROM.PRODUCT_TDECK:
+                selected_mcu = ROM.MCU_ESP32
+                print("\nWhat band is this T-Deck for?\n")
+                print("[1] 433 MHz         (with SX1268 chip)")
+                print("[2] 868/915/923 MHz (with SX1262 chip)")
+                print("\n? ", end="")
+                try:
+                    c_model = int(input())
+                    if c_model < 1 or c_model > 2:
+                        raise ValueError()
+                    elif c_model == 1:
+                        selected_model = ROM.MODEL_D4
+                        selected_platform = ROM.PLATFORM_ESP32
+                    elif c_model == 2:
+                        selected_model = ROM.MODEL_D9
+                        selected_platform = ROM.PLATFORM_ESP32
+                except Exception as e:
+                    print("That band does not exist, exiting now.")
+                    graceful_exit()
+
             elif selected_product == ROM.PRODUCT_T32_10:
                 selected_mcu = ROM.MCU_ESP32
                 print("\nWhat band is this LoRa32 for?\n")
@@ -2789,6 +2890,60 @@ def main():
                             "0x210000",UPD_DIR+"/"+selected_version+"/console_image.bin",
                             "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_t3s3.partitions",
                         ]
+                    elif fw_filename == "rnode_firmware_t3s3_sx127x.zip":
+                        return [
+                            sys.executable, flasher,
+                            "--chip", "esp32s3",
+                            "--port", args.port,
+                            "--baud", args.baud_flash,
+                            "--before", "default_reset",
+                            "--after", "hard_reset",
+                            "write_flash", "-z",
+                            "--flash_mode", "dio",
+                            "--flash_freq", "80m",
+                            "--flash_size", "4MB",
+                            "0xe000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_t3s3_sx127x.boot_app0",
+                            "0x0",  UPD_DIR+"/"+selected_version+"/rnode_firmware_t3s3_sx127x.bootloader",
+                            "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_t3s3_sx127x.bin",
+                            "0x210000",UPD_DIR+"/"+selected_version+"/console_image.bin",
+                            "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_t3s3_sx127x.partitions",
+                        ]
+                    elif fw_filename == "rnode_firmware_tbeam_supreme.zip":
+                        return [
+                            sys.executable, flasher,
+                            "--chip", "esp32s3",
+                            "--port", args.port,
+                            "--baud", args.baud_flash,
+                            "--before", "default_reset",
+                            "--after", "hard_reset",
+                            "write_flash", "-z",
+                            "--flash_mode", "dio",
+                            "--flash_freq", "80m",
+                            "--flash_size", "4MB",
+                            "0xe000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam_supreme.boot_app0",
+                            "0x0",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam_supreme.bootloader",
+                            "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam_supreme.bin",
+                            "0x210000",UPD_DIR+"/"+selected_version+"/console_image.bin",
+                            "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam_supreme.partitions",
+                        ]
+                    elif fw_filename == "rnode_firmware_tdeck.zip":
+                        return [
+                            sys.executable, flasher,
+                            "--chip", "esp32s3",
+                            "--port", args.port,
+                            "--baud", args.baud_flash,
+                            "--before", "default_reset",
+                            "--after", "hard_reset",
+                            "write_flash", "-z",
+                            "--flash_mode", "dio",
+                            "--flash_freq", "80m",
+                            "--flash_size", "4MB",
+                            "0xe000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tdeck.boot_app0",
+                            "0x0",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tdeck.bootloader",
+                            "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_tdeck.bin",
+                            "0x210000",UPD_DIR+"/"+selected_version+"/console_image.bin",
+                            "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tdeck.partitions",
+                        ]
                     elif fw_filename == "extracted_rnode_firmware.zip":
                         return [
                             sys.executable, flasher,

RNS/Utilities/rnstatus.py

@@ -295,7 +295,8 @@ def program_setup(configdir, dispall=False, verbosity=0, name_filter=None, json=
                         if "battery_percent" in ifstat and ifstat["battery_percent"] != None:
                             try:
                                 bpi = int(ifstat["battery_percent"])
-                                print("    Battery   : {bp}%".format(bp=bpi))
+                                bss = ifstat["battery_state"]
+                                print(f"    Battery   : {bpi}% ({bss})")
                             except:
                                 pass
 

RNS/Utilities/rnx.py

@@ -28,8 +28,8 @@ import argparse
 import shlex
 import time
 import sys
-import tty
 import os
+#import tty
 
 from RNS._version import __version__
 

RNS/_version.py

@@ -1 +1 @@
-__version__ = "0.8.1"
+__version__ = "0.8.4"

docs/manual/.buildinfo

@@ -1,4 +1,4 @@
 # Sphinx build info version 1
 # This file hashes the configuration used when building these files. When it is not found, a full rebuild will be done.
-config: 1447e58e81cf4037238271210a352494
+config: ab3a817981de13f74ede3061942f75d2
 tags: 645f666f9bcd5a90fca523b33c5a78b7

docs/manual/_sources/hardware.rst.txt

@@ -90,77 +90,151 @@ Supported Boards
 To create one or more RNodes, you will need to obtain supported development
 boards. The following boards are supported by the auto-installer.
 
-LilyGO LoRa32 v2.1
-""""""""""""""""""
-.. image:: graphics/board_t3v21.png
-    :width: 46%
+------------
+
+.. image:: graphics/board_tbeam_supreme.png
+    :width: 75%
     :align: center
 
-- **Supported Firmware Lines** v1.x & v2.x
-- **Transceiver IC** Semtech SX1276
-- **Device Platform** ESP32
-- **Manufacturer** `LilyGO <https://lilygo.cn>`_
-
-
-LilyGO LoRa32 v2.0
-""""""""""""""""""
-.. image:: graphics/board_t3v20.png
-    :width: 46%
-    :align: center
-
-- **Supported Firmware Lines** v1.x & v2.x
-- **Transceiver IC** Semtech SX1276
-- **Device Platform** ESP32
-- **Manufacturer** `LilyGO <https://lilygo.cn>`_
-
-
-LilyGO T-Beam
+LilyGO T-Beam Supreme
 """""""""""""
+- **Transceiver IC** Semtech SX1262, SX1268
+- **Device Platform** ESP32
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
+
+------------
+
 .. image:: graphics/board_tbeam.png
     :width: 75%
     :align: center
 
-- **Supported Firmware Lines** v1.x & v2.x
-- **Transceiver IC** Semtech SX1276
+LilyGO T-Beam
+"""""""""""""
+- **Transceiver IC** Semtech SX1262, SX1268, SX1276 and SX1278
 - **Device Platform** ESP32
 - **Manufacturer** `LilyGO <https://lilygo.cn>`_
 
+------------
 
-Heltec LoRa32 v2.0
-""""""""""""""""""
-.. image:: graphics/board_heltec32.png
-    :width: 58%
+.. image:: graphics/board_t3s3.png
+    :width: 50%
     :align: center
 
-- **Supported Firmware Lines** v1.x & v2.x
-- **Transceiver IC** Semtech SX1276
+LilyGO T3S3
+"""""""""""
+- **Transceiver IC** Semtech SX1262, SX1268, SX1276 and SX1278
 - **Device Platform** ESP32
-- **Manufacturer** `Heltec Automation <https://heltec.org>`_
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
 
+------------
+
+.. image:: graphics/board_rak4631.png
+    :width: 45%
+    :align: center
+
+RAK4631-based Boards
+""""""""""""""""""""
+- **Transceiver IC** Semtech SX1262, SX1268
+- **Device Platform** nRF52
+- **Manufacturer** `RAK Wireless <https://www.rakwireless.com>`_
+
+------------
+
+.. image:: graphics/board_rnodev2.png
+    :width: 68%
+    :align: center
 
 Unsigned RNode v2.x
 """""""""""""""""""
-.. image:: graphics/board_rnodev2.png
-    :width: 58%
-    :align: center
-
-- **Supported Firmware Lines** v1.x & v2.x
-- **Transceiver IC** Semtech SX1276
+- **Transceiver IC** Semtech SX1276 and SX1278
 - **Device Platform** ESP32
 - **Manufacturer** `unsigned.io <https://unsigned.io>`_
 
+------------
+
+.. image:: graphics/board_t3v21.png
+    :width: 46%
+    :align: center
+
+LilyGO LoRa32 v2.1
+""""""""""""""""""
+- **Transceiver IC** Semtech SX1276 and SX1278
+- **Device Platform** ESP32
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
+
+------------
+
+.. image:: graphics/board_t3v20.png
+    :width: 46%
+    :align: center
+
+LilyGO LoRa32 v2.0
+""""""""""""""""""
+- **Transceiver IC** Semtech SX1276 and SX1278
+- **Device Platform** ESP32
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
+
+------------
+
+.. image:: graphics/board_t3v10.png
+    :width: 46%
+    :align: center
+
+LilyGO LoRa32 v1.0
+""""""""""""""""""
+- **Transceiver IC** Semtech SX1276 and SX1278
+- **Device Platform** ESP32
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
+
+------------
+
+.. image:: graphics/board_tdeck.png
+    :width: 45%
+    :align: center
+
+LilyGO T-Deck
+"""""""""""""
+- **Transceiver IC** Semtech SX1262, SX1268
+- **Device Platform** ESP32
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
+
+------------
+
+.. image:: graphics/board_heltec32v30.png
+    :width: 58%
+    :align: center
+
+Heltec LoRa32 v3.0
+""""""""""""""""""
+- **Transceiver IC** Semtech SX1262 and SX1268
+- **Device Platform** ESP32
+- **Manufacturer** `Heltec Automation <https://heltec.org>`_
+
+------------
+
+.. image:: graphics/board_heltec32v20.png
+    :width: 58%
+    :align: center
+
+Heltec LoRa32 v2.0
+""""""""""""""""""
+- **Transceiver IC** Semtech SX1276 and SX1278
+- **Device Platform** ESP32
+- **Manufacturer** `Heltec Automation <https://heltec.org>`_
+
+------------
 
-Unsigned RNode v1.x
-"""""""""""""""""""
 .. image:: graphics/board_rnode.png
     :width: 50%
     :align: center
 
-- **Supported Firmware Lines** v1.x
-- **Transceiver IC** Semtech SX1276
+Unsigned RNode v1.x
+"""""""""""""""""""
+- **Transceiver IC** Semtech SX1276 and SX1278
 - **Device Platform** AVR ATmega1284p
 - **Manufacturer** `unsigned.io <https://unsigned.io>`_
 
+------------
 
 .. _rnode-installation:
 
@@ -194,10 +268,8 @@ Usage with Reticulum
 ^^^^^^^^^^^^^^^^^^^^
 When the devices have been installed and provisioned, you can use them with Reticulum
 by adding the :ref:`relevant interface section<interfaces-rnode>` to the configuration
-file of Reticulum. For v1.x firmwares, you will have to specify all interface parameters,
-such as serial port and on-air parameters. For v2.x firmwares, you just need to specify
-the Connection ID of the RNode, and Reticulum will automatically locate and connect to the
-RNode, using the parameters stored in the RNode itself.
+file of Reticulum. In the configuraion you can specify all interface parameters,
+such as serial port and on-air parameters.
 
 
 WiFi-based Hardware

docs/manual/_static/documentation_options.js

@@ -1,6 +1,6 @@
 var DOCUMENTATION_OPTIONS = {
     URL_ROOT: document.getElementById("documentation_options").getAttribute('data-url_root'),
-    VERSION: '0.8.1 beta',
+    VERSION: '0.8.4 beta',
     LANGUAGE: 'en',
     COLLAPSE_INDEX: false,
     BUILDER: 'html',

docs/manual/examples.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Support Reticulum" href="support.html" /><link rel="prev" title="Building Networks" href="networks.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>Code Examples - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>Code Examples - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/forhumans.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>An Explanation of Reticulum for Human Beings - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>An Explanation of Reticulum for Human Beings - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/genindex.html

@@ -4,7 +4,7 @@
     <meta name="viewport" content="width=device-width,initial-scale=1"/>
     <meta name="color-scheme" content="light dark"><link rel="index" title="Index" href="#" /><link rel="search" title="Search" href="search.html" />
 
-    <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/><title>Index - Reticulum Network Stack 0.8.1 beta documentation</title>
+    <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/><title>Index - Reticulum Network Stack 0.8.4 beta documentation</title>
 <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -139,7 +139,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -165,7 +165,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/gettingstartedfast.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Using Reticulum on Your System" href="using.html" /><link rel="prev" title="What is Reticulum?" href="whatis.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>Getting Started Fast - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>Getting Started Fast - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/hardware.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Configuring Interfaces" href="interfaces.html" /><link rel="prev" title="Understanding Reticulum" href="understanding.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>Communications Hardware - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>Communications Hardware - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -291,65 +291,126 @@ to the configuration.</p>
 <span id="rnode-supported"></span><h3>Supported Boards<a class="headerlink" href="#supported-boards" title="Permalink to this heading">#</a></h3>
 <p>To create one or more RNodes, you will need to obtain supported development
 boards. The following boards are supported by the auto-installer.</p>
-<section id="lilygo-lora32-v2-1">
-<h4>LilyGO LoRa32 v2.1<a class="headerlink" href="#lilygo-lora32-v2-1" title="Permalink to this heading">#</a></h4>
-<a class="reference internal image-reference" href="_images/board_t3v21.png"><img alt="_images/board_t3v21.png" class="align-center" src="_images/board_t3v21.png" style="width: 46%;" /></a>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_tbeam_supreme.png"><img alt="_images/board_tbeam_supreme.png" class="align-center" src="_images/board_tbeam_supreme.png" style="width: 75%;" /></a>
+<section id="lilygo-t-beam-supreme">
+<h4>LilyGO T-Beam Supreme<a class="headerlink" href="#lilygo-t-beam-supreme" title="Permalink to this heading">#</a></h4>
 <ul class="simple">
-<li><p><strong>Supported Firmware Lines</strong> v1.x &amp; v2.x</p></li>
-<li><p><strong>Transceiver IC</strong> Semtech SX1276</p></li>
-<li><p><strong>Device Platform</strong> ESP32</p></li>
-<li><p><strong>Manufacturer</strong> <a class="reference external" href="https://lilygo.cn">LilyGO</a></p></li>
-</ul>
-</section>
-<section id="lilygo-lora32-v2-0">
-<h4>LilyGO LoRa32 v2.0<a class="headerlink" href="#lilygo-lora32-v2-0" title="Permalink to this heading">#</a></h4>
-<a class="reference internal image-reference" href="_images/board_t3v20.png"><img alt="_images/board_t3v20.png" class="align-center" src="_images/board_t3v20.png" style="width: 46%;" /></a>
-<ul class="simple">
-<li><p><strong>Supported Firmware Lines</strong> v1.x &amp; v2.x</p></li>
-<li><p><strong>Transceiver IC</strong> Semtech SX1276</p></li>
+<li><p><strong>Transceiver IC</strong> Semtech SX1262, SX1268</p></li>
 <li><p><strong>Device Platform</strong> ESP32</p></li>
 <li><p><strong>Manufacturer</strong> <a class="reference external" href="https://lilygo.cn">LilyGO</a></p></li>
 </ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_tbeam.png"><img alt="_images/board_tbeam.png" class="align-center" src="_images/board_tbeam.png" style="width: 75%;" /></a>
 </section>
 <section id="lilygo-t-beam">
 <h4>LilyGO T-Beam<a class="headerlink" href="#lilygo-t-beam" title="Permalink to this heading">#</a></h4>
-<a class="reference internal image-reference" href="_images/board_tbeam.png"><img alt="_images/board_tbeam.png" class="align-center" src="_images/board_tbeam.png" style="width: 75%;" /></a>
 <ul class="simple">
-<li><p><strong>Supported Firmware Lines</strong> v1.x &amp; v2.x</p></li>
-<li><p><strong>Transceiver IC</strong> Semtech SX1276</p></li>
+<li><p><strong>Transceiver IC</strong> Semtech SX1262, SX1268, SX1276 and SX1278</p></li>
 <li><p><strong>Device Platform</strong> ESP32</p></li>
 <li><p><strong>Manufacturer</strong> <a class="reference external" href="https://lilygo.cn">LilyGO</a></p></li>
 </ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_t3s3.png"><img alt="_images/board_t3s3.png" class="align-center" src="_images/board_t3s3.png" style="width: 50%;" /></a>
 </section>
-<section id="heltec-lora32-v2-0">
-<h4>Heltec LoRa32 v2.0<a class="headerlink" href="#heltec-lora32-v2-0" title="Permalink to this heading">#</a></h4>
-<a class="reference internal image-reference" href="_images/board_heltec32.png"><img alt="_images/board_heltec32.png" class="align-center" src="_images/board_heltec32.png" style="width: 58%;" /></a>
+<section id="lilygo-t3s3">
+<h4>LilyGO T3S3<a class="headerlink" href="#lilygo-t3s3" title="Permalink to this heading">#</a></h4>
 <ul class="simple">
-<li><p><strong>Supported Firmware Lines</strong> v1.x &amp; v2.x</p></li>
-<li><p><strong>Transceiver IC</strong> Semtech SX1276</p></li>
+<li><p><strong>Transceiver IC</strong> Semtech SX1262, SX1268, SX1276 and SX1278</p></li>
 <li><p><strong>Device Platform</strong> ESP32</p></li>
-<li><p><strong>Manufacturer</strong> <a class="reference external" href="https://heltec.org">Heltec Automation</a></p></li>
+<li><p><strong>Manufacturer</strong> <a class="reference external" href="https://lilygo.cn">LilyGO</a></p></li>
 </ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_rak4631.png"><img alt="_images/board_rak4631.png" class="align-center" src="_images/board_rak4631.png" style="width: 45%;" /></a>
+</section>
+<section id="rak4631-based-boards">
+<h4>RAK4631-based Boards<a class="headerlink" href="#rak4631-based-boards" title="Permalink to this heading">#</a></h4>
+<ul class="simple">
+<li><p><strong>Transceiver IC</strong> Semtech SX1262, SX1268</p></li>
+<li><p><strong>Device Platform</strong> nRF52</p></li>
+<li><p><strong>Manufacturer</strong> <a class="reference external" href="https://www.rakwireless.com">RAK Wireless</a></p></li>
+</ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_rnodev2.png"><img alt="_images/board_rnodev2.png" class="align-center" src="_images/board_rnodev2.png" style="width: 68%;" /></a>
 </section>
 <section id="unsigned-rnode-v2-x">
 <h4>Unsigned RNode v2.x<a class="headerlink" href="#unsigned-rnode-v2-x" title="Permalink to this heading">#</a></h4>
-<a class="reference internal image-reference" href="_images/board_rnodev2.png"><img alt="_images/board_rnodev2.png" class="align-center" src="_images/board_rnodev2.png" style="width: 58%;" /></a>
 <ul class="simple">
-<li><p><strong>Supported Firmware Lines</strong> v1.x &amp; v2.x</p></li>
-<li><p><strong>Transceiver IC</strong> Semtech SX1276</p></li>
+<li><p><strong>Transceiver IC</strong> Semtech SX1276 and SX1278</p></li>
 <li><p><strong>Device Platform</strong> ESP32</p></li>
 <li><p><strong>Manufacturer</strong> <a class="reference external" href="https://unsigned.io">unsigned.io</a></p></li>
 </ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_t3v21.png"><img alt="_images/board_t3v21.png" class="align-center" src="_images/board_t3v21.png" style="width: 46%;" /></a>
+</section>
+<section id="lilygo-lora32-v2-1">
+<h4>LilyGO LoRa32 v2.1<a class="headerlink" href="#lilygo-lora32-v2-1" title="Permalink to this heading">#</a></h4>
+<ul class="simple">
+<li><p><strong>Transceiver IC</strong> Semtech SX1276 and SX1278</p></li>
+<li><p><strong>Device Platform</strong> ESP32</p></li>
+<li><p><strong>Manufacturer</strong> <a class="reference external" href="https://lilygo.cn">LilyGO</a></p></li>
+</ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_t3v20.png"><img alt="_images/board_t3v20.png" class="align-center" src="_images/board_t3v20.png" style="width: 46%;" /></a>
+</section>
+<section id="lilygo-lora32-v2-0">
+<h4>LilyGO LoRa32 v2.0<a class="headerlink" href="#lilygo-lora32-v2-0" title="Permalink to this heading">#</a></h4>
+<ul class="simple">
+<li><p><strong>Transceiver IC</strong> Semtech SX1276 and SX1278</p></li>
+<li><p><strong>Device Platform</strong> ESP32</p></li>
+<li><p><strong>Manufacturer</strong> <a class="reference external" href="https://lilygo.cn">LilyGO</a></p></li>
+</ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_t3v10.png"><img alt="_images/board_t3v10.png" class="align-center" src="_images/board_t3v10.png" style="width: 46%;" /></a>
+</section>
+<section id="lilygo-lora32-v1-0">
+<h4>LilyGO LoRa32 v1.0<a class="headerlink" href="#lilygo-lora32-v1-0" title="Permalink to this heading">#</a></h4>
+<ul class="simple">
+<li><p><strong>Transceiver IC</strong> Semtech SX1276 and SX1278</p></li>
+<li><p><strong>Device Platform</strong> ESP32</p></li>
+<li><p><strong>Manufacturer</strong> <a class="reference external" href="https://lilygo.cn">LilyGO</a></p></li>
+</ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_tdeck.png"><img alt="_images/board_tdeck.png" class="align-center" src="_images/board_tdeck.png" style="width: 45%;" /></a>
+</section>
+<section id="lilygo-t-deck">
+<h4>LilyGO T-Deck<a class="headerlink" href="#lilygo-t-deck" title="Permalink to this heading">#</a></h4>
+<ul class="simple">
+<li><p><strong>Transceiver IC</strong> Semtech SX1262, SX1268</p></li>
+<li><p><strong>Device Platform</strong> ESP32</p></li>
+<li><p><strong>Manufacturer</strong> <a class="reference external" href="https://lilygo.cn">LilyGO</a></p></li>
+</ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_heltec32v30.png"><img alt="_images/board_heltec32v30.png" class="align-center" src="_images/board_heltec32v30.png" style="width: 58%;" /></a>
+</section>
+<section id="heltec-lora32-v3-0">
+<h4>Heltec LoRa32 v3.0<a class="headerlink" href="#heltec-lora32-v3-0" title="Permalink to this heading">#</a></h4>
+<ul class="simple">
+<li><p><strong>Transceiver IC</strong> Semtech SX1262 and SX1268</p></li>
+<li><p><strong>Device Platform</strong> ESP32</p></li>
+<li><p><strong>Manufacturer</strong> <a class="reference external" href="https://heltec.org">Heltec Automation</a></p></li>
+</ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_heltec32v20.png"><img alt="_images/board_heltec32v20.png" class="align-center" src="_images/board_heltec32v20.png" style="width: 58%;" /></a>
+</section>
+<section id="heltec-lora32-v2-0">
+<h4>Heltec LoRa32 v2.0<a class="headerlink" href="#heltec-lora32-v2-0" title="Permalink to this heading">#</a></h4>
+<ul class="simple">
+<li><p><strong>Transceiver IC</strong> Semtech SX1276 and SX1278</p></li>
+<li><p><strong>Device Platform</strong> ESP32</p></li>
+<li><p><strong>Manufacturer</strong> <a class="reference external" href="https://heltec.org">Heltec Automation</a></p></li>
+</ul>
+<hr class="docutils" />
+<a class="reference internal image-reference" href="_images/board_rnode.png"><img alt="_images/board_rnode.png" class="align-center" src="_images/board_rnode.png" style="width: 50%;" /></a>
 </section>
 <section id="unsigned-rnode-v1-x">
 <h4>Unsigned RNode v1.x<a class="headerlink" href="#unsigned-rnode-v1-x" title="Permalink to this heading">#</a></h4>
-<a class="reference internal image-reference" href="_images/board_rnode.png"><img alt="_images/board_rnode.png" class="align-center" src="_images/board_rnode.png" style="width: 50%;" /></a>
 <ul class="simple">
-<li><p><strong>Supported Firmware Lines</strong> v1.x</p></li>
-<li><p><strong>Transceiver IC</strong> Semtech SX1276</p></li>
+<li><p><strong>Transceiver IC</strong> Semtech SX1276 and SX1278</p></li>
 <li><p><strong>Device Platform</strong> AVR ATmega1284p</p></li>
 <li><p><strong>Manufacturer</strong> <a class="reference external" href="https://unsigned.io">unsigned.io</a></p></li>
 </ul>
+<hr class="docutils" />
 </section>
 </section>
 <section id="installation">
@@ -375,10 +436,8 @@ auto-install and configure your devices.</p>
 <span id="rnode-usage"></span><h3>Usage with Reticulum<a class="headerlink" href="#usage-with-reticulum" title="Permalink to this heading">#</a></h3>
 <p>When the devices have been installed and provisioned, you can use them with Reticulum
 by adding the <a class="reference internal" href="interfaces.html#interfaces-rnode"><span class="std std-ref">relevant interface section</span></a> to the configuration
-file of Reticulum. For v1.x firmwares, you will have to specify all interface parameters,
-such as serial port and on-air parameters. For v2.x firmwares, you just need to specify
-the Connection ID of the RNode, and Reticulum will automatically locate and connect to the
-RNode, using the parameters stored in the RNode itself.</p>
+file of Reticulum. In the configuraion you can specify all interface parameters,
+such as serial port and on-air parameters.</p>
 </section>
 </section>
 <section id="wifi-based-hardware">
@@ -492,11 +551,17 @@ can be used with Reticulum. This includes virtual software modems such as
 <li><a class="reference internal" href="#rnode">RNode</a><ul>
 <li><a class="reference internal" href="#creating-rnodes">Creating RNodes</a></li>
 <li><a class="reference internal" href="#supported-boards">Supported Boards</a><ul>
+<li><a class="reference internal" href="#lilygo-t-beam-supreme">LilyGO T-Beam Supreme</a></li>
+<li><a class="reference internal" href="#lilygo-t-beam">LilyGO T-Beam</a></li>
+<li><a class="reference internal" href="#lilygo-t3s3">LilyGO T3S3</a></li>
+<li><a class="reference internal" href="#rak4631-based-boards">RAK4631-based Boards</a></li>
+<li><a class="reference internal" href="#unsigned-rnode-v2-x">Unsigned RNode v2.x</a></li>
 <li><a class="reference internal" href="#lilygo-lora32-v2-1">LilyGO LoRa32 v2.1</a></li>
 <li><a class="reference internal" href="#lilygo-lora32-v2-0">LilyGO LoRa32 v2.0</a></li>
-<li><a class="reference internal" href="#lilygo-t-beam">LilyGO T-Beam</a></li>
+<li><a class="reference internal" href="#lilygo-lora32-v1-0">LilyGO LoRa32 v1.0</a></li>
+<li><a class="reference internal" href="#lilygo-t-deck">LilyGO T-Deck</a></li>
+<li><a class="reference internal" href="#heltec-lora32-v3-0">Heltec LoRa32 v3.0</a></li>
 <li><a class="reference internal" href="#heltec-lora32-v2-0">Heltec LoRa32 v2.0</a></li>
-<li><a class="reference internal" href="#unsigned-rnode-v2-x">Unsigned RNode v2.x</a></li>
 <li><a class="reference internal" href="#unsigned-rnode-v1-x">Unsigned RNode v1.x</a></li>
 </ul>
 </li>

docs/manual/index.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="What is Reticulum?" href="whatis.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="#"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="#"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/interfaces.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Building Networks" href="networks.html" /><link rel="prev" title="Communications Hardware" href="hardware.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>Configuring Interfaces - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>Configuring Interfaces - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/networks.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Code Examples" href="examples.html" /><link rel="prev" title="Configuring Interfaces" href="interfaces.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>Building Networks - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>Building Networks - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/reference.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="prev" title="Support Reticulum" href="support.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>API Reference - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>API Reference - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/search.html

@@ -4,7 +4,7 @@
     <meta name="viewport" content="width=device-width,initial-scale=1"/>
     <meta name="color-scheme" content="light dark"><link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="#" />
 
-    <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/><title>Search - Reticulum Network Stack 0.8.1 beta documentation</title><link rel="stylesheet" type="text/css" href="_static/pygments.css" />
+    <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/><title>Search - Reticulum Network Stack 0.8.4 beta documentation</title><link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo-extensions.css?digest=30d1aed668e5c3a91c3e3bf6a60b675221979f0e" />
@@ -138,7 +138,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -164,7 +164,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="#" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/support.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="API Reference" href="reference.html" /><link rel="prev" title="Code Examples" href="examples.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>Support Reticulum - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>Support Reticulum - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/understanding.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Communications Hardware" href="hardware.html" /><link rel="prev" title="Using Reticulum on Your System" href="using.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>Understanding Reticulum - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>Understanding Reticulum - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/using.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Understanding Reticulum" href="understanding.html" /><link rel="prev" title="Getting Started Fast" href="gettingstartedfast.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>Using Reticulum on Your System - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>Using Reticulum on Your System - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/manual/whatis.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Getting Started Fast" href="gettingstartedfast.html" /><link rel="prev" title="Reticulum Network Stack Manual" href="index.html" />
 
     <meta name="generator" content="sphinx-5.3.0, furo 2022.09.29.dev1"/>
-        <title>What is Reticulum? - Reticulum Network Stack 0.8.1 beta documentation</title>
+        <title>What is Reticulum? - Reticulum Network Stack 0.8.4 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.1 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.8.4 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.1 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.8.4 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">

docs/source/hardware.rst

@@ -90,77 +90,151 @@ Supported Boards
 To create one or more RNodes, you will need to obtain supported development
 boards. The following boards are supported by the auto-installer.
 
-LilyGO LoRa32 v2.1
-""""""""""""""""""
-.. image:: graphics/board_t3v21.png
-    :width: 46%
+------------
+
+.. image:: graphics/board_tbeam_supreme.png
+    :width: 75%
     :align: center
 
-- **Supported Firmware Lines** v1.x & v2.x
-- **Transceiver IC** Semtech SX1276
-- **Device Platform** ESP32
-- **Manufacturer** `LilyGO <https://lilygo.cn>`_
-
-
-LilyGO LoRa32 v2.0
-""""""""""""""""""
-.. image:: graphics/board_t3v20.png
-    :width: 46%
-    :align: center
-
-- **Supported Firmware Lines** v1.x & v2.x
-- **Transceiver IC** Semtech SX1276
-- **Device Platform** ESP32
-- **Manufacturer** `LilyGO <https://lilygo.cn>`_
-
-
-LilyGO T-Beam
+LilyGO T-Beam Supreme
 """""""""""""
+- **Transceiver IC** Semtech SX1262, SX1268
+- **Device Platform** ESP32
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
+
+------------
+
 .. image:: graphics/board_tbeam.png
     :width: 75%
     :align: center
 
-- **Supported Firmware Lines** v1.x & v2.x
-- **Transceiver IC** Semtech SX1276
+LilyGO T-Beam
+"""""""""""""
+- **Transceiver IC** Semtech SX1262, SX1268, SX1276 and SX1278
 - **Device Platform** ESP32
 - **Manufacturer** `LilyGO <https://lilygo.cn>`_
 
+------------
 
-Heltec LoRa32 v2.0
-""""""""""""""""""
-.. image:: graphics/board_heltec32.png
-    :width: 58%
+.. image:: graphics/board_t3s3.png
+    :width: 50%
     :align: center
 
-- **Supported Firmware Lines** v1.x & v2.x
-- **Transceiver IC** Semtech SX1276
+LilyGO T3S3
+"""""""""""
+- **Transceiver IC** Semtech SX1262, SX1268, SX1276 and SX1278
 - **Device Platform** ESP32
-- **Manufacturer** `Heltec Automation <https://heltec.org>`_
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
 
+------------
+
+.. image:: graphics/board_rak4631.png
+    :width: 45%
+    :align: center
+
+RAK4631-based Boards
+""""""""""""""""""""
+- **Transceiver IC** Semtech SX1262, SX1268
+- **Device Platform** nRF52
+- **Manufacturer** `RAK Wireless <https://www.rakwireless.com>`_
+
+------------
+
+.. image:: graphics/board_rnodev2.png
+    :width: 68%
+    :align: center
 
 Unsigned RNode v2.x
 """""""""""""""""""
-.. image:: graphics/board_rnodev2.png
-    :width: 58%
-    :align: center
-
-- **Supported Firmware Lines** v1.x & v2.x
-- **Transceiver IC** Semtech SX1276
+- **Transceiver IC** Semtech SX1276 and SX1278
 - **Device Platform** ESP32
 - **Manufacturer** `unsigned.io <https://unsigned.io>`_
 
+------------
+
+.. image:: graphics/board_t3v21.png
+    :width: 46%
+    :align: center
+
+LilyGO LoRa32 v2.1
+""""""""""""""""""
+- **Transceiver IC** Semtech SX1276 and SX1278
+- **Device Platform** ESP32
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
+
+------------
+
+.. image:: graphics/board_t3v20.png
+    :width: 46%
+    :align: center
+
+LilyGO LoRa32 v2.0
+""""""""""""""""""
+- **Transceiver IC** Semtech SX1276 and SX1278
+- **Device Platform** ESP32
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
+
+------------
+
+.. image:: graphics/board_t3v10.png
+    :width: 46%
+    :align: center
+
+LilyGO LoRa32 v1.0
+""""""""""""""""""
+- **Transceiver IC** Semtech SX1276 and SX1278
+- **Device Platform** ESP32
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
+
+------------
+
+.. image:: graphics/board_tdeck.png
+    :width: 45%
+    :align: center
+
+LilyGO T-Deck
+"""""""""""""
+- **Transceiver IC** Semtech SX1262, SX1268
+- **Device Platform** ESP32
+- **Manufacturer** `LilyGO <https://lilygo.cn>`_
+
+------------
+
+.. image:: graphics/board_heltec32v30.png
+    :width: 58%
+    :align: center
+
+Heltec LoRa32 v3.0
+""""""""""""""""""
+- **Transceiver IC** Semtech SX1262 and SX1268
+- **Device Platform** ESP32
+- **Manufacturer** `Heltec Automation <https://heltec.org>`_
+
+------------
+
+.. image:: graphics/board_heltec32v20.png
+    :width: 58%
+    :align: center
+
+Heltec LoRa32 v2.0
+""""""""""""""""""
+- **Transceiver IC** Semtech SX1276 and SX1278
+- **Device Platform** ESP32
+- **Manufacturer** `Heltec Automation <https://heltec.org>`_
+
+------------
 
-Unsigned RNode v1.x
-"""""""""""""""""""
 .. image:: graphics/board_rnode.png
     :width: 50%
     :align: center
 
-- **Supported Firmware Lines** v1.x
-- **Transceiver IC** Semtech SX1276
+Unsigned RNode v1.x
+"""""""""""""""""""
+- **Transceiver IC** Semtech SX1276 and SX1278
 - **Device Platform** AVR ATmega1284p
 - **Manufacturer** `unsigned.io <https://unsigned.io>`_
 
+------------
 
 .. _rnode-installation:
 
@@ -194,10 +268,8 @@ Usage with Reticulum
 ^^^^^^^^^^^^^^^^^^^^
 When the devices have been installed and provisioned, you can use them with Reticulum
 by adding the :ref:`relevant interface section<interfaces-rnode>` to the configuration
-file of Reticulum. For v1.x firmwares, you will have to specify all interface parameters,
-such as serial port and on-air parameters. For v2.x firmwares, you just need to specify
-the Connection ID of the RNode, and Reticulum will automatically locate and connect to the
-RNode, using the parameters stored in the RNode itself.
+file of Reticulum. In the configuraion you can specify all interface parameters,
+such as serial port and on-air parameters.
 
 
 WiFi-based Hardware