- Add dedicated LISTEN button (🎧) to function strip for direct audio playback
- Rename START to SCAN (📡) to clarify it scans for signals, not direct audio
- Update function strip status to show LISTENING (green) vs SCANNING (cyan)
- Update updateListeningStripRunning() to accept mode parameter
- Add listenFromStrip() function for direct audio from function strip
- Update stopListening() to handle both scanner and audio states
- Move .listening status dot to green color group (matches audio state)
This clarifies the confusion where users expected the START button to play audio,
but it actually started the frequency scanner which only plays audio when signals
are detected.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Call switchMode(currentMode) on page load to properly initialize the
default pager mode and show the function strip
- Explicitly set window.switchMode and window.toggleNavDropdown after
function definitions to override fallbacks defined in nav.html partial
- This fixes an issue where the nav.html fallback functions (which
redirect to /?mode=X) would persist due to script execution order
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix function strip content being clipped by changing overflow to visible
- Add min-height and increased padding to function strip
- Add explicit colors for TSCM strip stat values and labels
- Fix output-panel overflow for TSCM mode using :has() selector
- Add CSS variables --bg-dark and --bg-panel aliases
- Clean up sidebar section margins for consistent spacing
- Add unique IDs to WiFi/Bluetooth export sections for restore function
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Sidebar sections now rearrange based on active mode
- Mode info section (e.g., WiFi Scanning, Spectrum Analyzer) appears at top expanded
- Signal Source and SDR Device sections collapse and move below mode sections
- Other mode sections default to collapsed state
- Sections restore to original containers when switching modes
- Fix SCAN/LISTEN button styling consistency in Listening Post
- Reorder WiFi sections: WiFi Scanning, Signal Source, Monitor Mode, Scan Settings, Attack Options, Proximity Alerts, Export
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
CSS @import from within stylesheets may not load reliably.
Adding direct <link> tags ensures layout.css (with nav styles)
is loaded on all dashboard pages.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Replace 100+ lines of duplicated nav markup with partial include
- Add is_index_page variable to nav partial for conditional behavior
- Satellite/SSTV use switchMode on index, link to dashboard elsewhere
- Reduces code duplication, single source of truth for navigation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Skip welcome screen when navigating with ?mode=X parameter
- Fixes nav from dashboards to panel modes (e.g., APRS, WiFi)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Read ?mode=X parameter from URL when index.html loads
- Automatically switch to the specified mode (e.g., /?mode=aprs)
- Fixes navigation from dashboard pages to panel modes like APRS
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Changed Satellite from switchMode button to dashboard link
- Consistent behavior: all dashboard modes (ADSB, AIS, Satellite) now
link to their respective dashboards in the nav partial
- Only affects dashboard pages; index.html keeps its own navigation
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add ISS SSTV decoder mode with real-time tracking globe
- Add GitHub update notifications for new releases
- Enhance Meshtastic with QR codes and telemetry display
- Add new Space category for satellite modes
- Fix SoapySDR detection, dump1090 builds, and Flask compatibility
- Update version numbers and changelog
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add new "Space" category with Satellite and ISS SSTV modes
- Rename "Scanner" to "Listening Post"
- SSTV now uses global SDR device selector
- Meshtastic map markers more visible (stronger glow, larger size)
- CSS layout fixes using flex instead of fixed heights
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use real Leaflet map with proper tile layers (same as satellite section)
- ISS marker with pulsing glow animation
- Ground track orbit line showing ISS path
- Map auto-pans to follow ISS position
- Simplified overlay showing position and next pass info
- Responsive layout that adapts to screen size
- Removed custom canvas rendering and continent data
The Leaflet map uses the same tile provider as other sections,
ensuring the ISS position is accurately displayed on a real map.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use simple equirectangular projection for guaranteed accuracy
- Direct linear mapping: lon to x, lat to y (no complex 3D math)
- Show ISS ground track orbit path
- Continent outlines rendered on flat map
- Canvas changed to 300x150 for proper 2:1 aspect ratio
- Updated CSS for rectangular map styling
The 2D map uses a straightforward coordinate transformation
that cannot produce incorrect positions.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Update TLE data with current orbital elements for accurate predictions
- Add location inputs (lat/lon) and GPS button to SSTV stats strip
- Add TLE update button to fetch latest orbital data from CelesTrak
- Add 3D globe visualization showing real-time ISS position
- Display ISS coordinates and altitude below globe
- Auto-refresh ISS position every 5 seconds
- Add NOAA-15, NOAA-18, NOAA-19 satellites to TLE data
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix GPS button not working (pass button element to handler)
- Hide output element in SSTV mode to allow panels to fill space
- Add explicit height rules for SSTV panels to expand vertically
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Location tab to settings modal with lat/lon inputs
- Add GPS detection button for auto-location
- Update SSTV to use saved location for ISS pass predictions
- Fix SSTV panels to use full screen width (remove max-width constraint)
- Improve ISS pass messages to guide users to location settings
- Add checked/last_check fields to update status response
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add slow-scan television decoder for receiving images from ISS.
Includes new Space dropdown in navigation grouping Satellite and SSTV modes.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Check for new releases from GitHub API with 6-hour cache
- Show toast notification when updates are available
- Add Updates tab in settings for manual checks and preferences
- Support git-based updates with stash handling for local changes
- Persist dismissed versions to avoid repeated notifications
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The bias-T checkbox on the main dashboard was not being passed to the
ADS-B and AIS tracking start requests. Added getBiasTEnabled() helper
to each dashboard that reads from shared localStorage, and updated all
start request bodies to include bias_t parameter.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add inline script in <head> that checks localStorage before page renders
- If disclaimer not accepted, hide welcome page via injected CSS
- Show disclaimer modal on DOMContentLoaded
- After accepting, remove gate CSS and reveal welcome page
- User must accept disclaimer before they can access the application
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Reverts the utility bar feature and disclaimer timing changes that
caused the disclaimer to flash on screen for users who had already
accepted it.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Show disclaimer BEFORE welcome page on first visit (was showing after)
- Add shared utility-bar.html partial with theme, animations, settings, help
- Include utility bar on Aircraft, Satellite, and Vessels dashboards
- Support ?settings=open and ?help=open URL params from dashboards
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Settings.registerMap() to register maps for tile updates
- Add Settings.createTileLayer() to create tile layers from settings
- Update _updateMapTiles() to use registered maps
- Expose all maps to window object for settings manager access
- All dashboards now use Settings manager when available
- Tile provider changes in settings now apply immediately to all maps
- Use Fastly CDN for CARTO tiles (more reliable)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The {r} retina parameter was causing CARTO to return light/gray tiles
instead of dark tiles. Removed {r} from all tile layer URLs.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix traceroute button in Meshtastic popups using event delegation
instead of inline onclick handlers (more reliable with Leaflet)
- Update all maps to use dark CARTO tiles for consistency:
- ADS-B dashboard radar map
- AIS dashboard vessel map
- Satellite dashboard ground map
- APRS map
- Satellite ground track map in main UI
- Change settings manager default tile provider to cartodb_dark
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Makes it much clearer which vehicle is being tracked on the map by adding
two animated concentric rings that pulse outward from the selected marker.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add full telemetry display in node popups including device metrics
(voltage, channel utilization, air TX) and environment sensors
(temperature, humidity, barometric pressure).
Add traceroute functionality with interactive visualization showing
hop paths and SNR values. Includes API endpoints for sending traceroutes
and retrieving results, plus a modal UI for displaying route information.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Automatically connects to gpsd on page load if available. Updates
observer location in real-time with GPS indicator in top bar.
Includes auto-reconnect on visibility change.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Transform flat scrolling meter list into grouped view showing one card
per unique meter with:
- Consumption history tracking and delta from previous reading
- Trend sparkline visualization (color-coded for normal/elevated/spike)
- Consumption rate calculation (units/hour over 30-min window)
- Cards update in place instead of creating duplicates
- Alert sound only plays for new meters
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add getMeterTypeInfo() with ERT endpoint type lookups for utility type
(Electric/Gas/Water) and manufacturer (Itron, Landis+Gyr, Neptune, etc.)
- Hook addRtlamrReading into trackDevice() for Device Intelligence panel
- Add meter protocol handling to generateDeviceId()
- Display manufacturer and utility type on meter cards
- Show utility type as badge, manufacturer in meta row and details panel
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Make logo clickable, opens GitHub Pages in new tab
- Match What's New box height to Select Mode box
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When clicking an aircraft in the sidebar, its map marker now shows
an enhanced white glow (10px) to distinguish it from other markers.
This matches the existing behavior in AIS mode.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Merged the two gear icons in the header bar into one unified Settings modal.
Added a "Tools" tab to display dependency status, removing the separate
dependencies modal and button.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The JavaScript checks for 'statusJetbrains' but the HTML had
'statusJetBrains' causing the status check to fail.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New Features:
- Meshtastic LoRa mesh network integration
- Real-time message streaming via SSE
- Channel configuration with encryption
- Node information with RSSI/SNR metrics
- Ubertooth One BLE scanner backend
- Passive capture across all 40 BLE channels
- Raw advertising payload access
- Offline mode with bundled assets
- Local Leaflet, Chart.js, and fonts
- Multiple map tile providers
- Settings modal for configuration
Technical Changes:
- New routes: meshtastic.py, offline.py
- New utils: ubertooth_scanner.py, meshtastic.py
- New CSS/JS for meshtastic and settings
- Updated dashboard templates with conditional asset loading
- Added context processor for offline settings
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add animated SVG globe with rotating meridians as a subtle background
element on the welcome overlay and login pages.
Also removes unused signal-cards-mockup.html.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add browser history back button alongside existing dashboard links on
vessels, aircraft, network monitor, and remote agents pages.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix header logo and title alignment using flexbox
- Move Refresh All button next to Register Agent button
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Location dropdown in header to select observer position source
- Options: Local (browser GPS) or any registered agent with GPS
- Fetches agent GPS position via /controller/agents/{id}/status
- Satellite pass predictions calculated from agent's location
- Observer marker on map shows agent name in popup
- Status dot indicates GPS availability
- Agent: Add _detect_acarsdec_fork() for f00b4r0/DragonOS support
- Agent: Use --output json:file, --rtlsdr, -m 256 for f00b4r0 fork
- UI: Add setAcarsRunning() to sync button state with agent
- UI: Add 'acars' to syncModeUI uiSetters map
ACARS (f00b4r0/DragonOS compatibility):
- Use --output json:file (not json:file:-) for stdout
- Use --rtlsdr instead of -r for device selection
- Use -m 256 for 3.2 MS/s sample rate (wider bandwidth for NA freqs)
- Properly detects fork by checking for --output in help
The f00b4r0 fork (used by DragonOS) has different CLI syntax than
TLeconte's original. Key differences:
- TLeconte: -j -r <device>
- f00b4r0: --output json:file -m 256 --rtlsdr <device>
ADS-B stop fix:
- Add Content-Type header to stop fetch request
- Flask's request.json requires application/json content type
- Without this header, stop returns HTTP 415 and dump1090 keeps running
- Fix device dropdown to use sdr_devices (same as agents.js fix)
- Keep dropdown/start button enabled in "All Agents" mode for control
- Disable airband controls for remote agents (audio not supported)
Agent fixes:
- Fix stop not killing secondary processes (pager_rtl, aprs_rtl, rtlamr_tcp)
- Modes using piped processes now properly terminate all child processes
UI state sync fixes:
- Add syncLocalModeStates() to check local status when switching to local
- Fix switchMode() to re-sync with agent/local when changing mode tabs
- Only stop local modes when actually in local mode
- UI now correctly reflects running state when switching agents or modes
- Fix device dropdown for agent mode by checking sdr_devices key
- Fix pager checkStatus() to use agent endpoint when in agent mode
- Fix WiFi checkScanStatus() to be agent-aware
- Fix Bluetooth checkScanStatus() to be agent-aware
These fixes prevent the UI from reverting to 'stopped' state when
the agent is actually running a mode.
- Agent TSCM uses same ThreatDetector and CorrelationEngine as local mode
- Added baseline_id parameter support using get_tscm_baseline()
- Fixed RF scan stop_check to allow agent-specific stop events
- Fixed 'undefined MHz' display for WiFi devices (added essid fallback and null check)
- Fixed signal strength type conversion (string to int) for correlation engine
- Agent threat detection matches local mode behavior:
- No baseline: detects anomaly/hidden_camera threats only
- With baseline: also detects new_device threats
Health Monitoring:
- Add /controller/agents/health endpoint for efficient bulk health checks
- Check all agents in one call with response time tracking
- Update agent status in real-time (30s interval)
- Show latency next to agent status in UI
- Add collapsible "All Agents Health" panel in sidebar
- Log console notifications when agents go online/offline
Response Utilities:
- Add unwrapAgentResponse() to consistently handle controller proxy format
- Add isAgentMode() and getCurrentAgentName() helpers
- Standardize error handling for agent responses
UI Improvements:
- Show response latency (ms) in agent selector dropdown
- Health panel shows status + running modes for each agent
- Better visual feedback for agent status changes
Agent improvements:
- Add process verification (0.5s delay + poll check) for sensor, pager, APRS, DSC modes
- Prevents silent failures when SDR is busy or tools fail to start
- Returns clear error messages when subprocess exits immediately
Frontend agent integration:
- Add agent routing to all SDR modes (pager, sensor, RTLAMR, APRS, listening post, TSCM)
- Add agent routing to WiFi and Bluetooth modes with polling fallback
- Add agent routing to AIS and DSC dashboards
- Implement "Show All Agents" toggle for Bluetooth mode
- Add agent badges to device/network lists
- Handle controller proxy response format (nested 'result' field)
Controller enhancements:
- Add running_modes_detail endpoint showing device info per mode
- Support SDR conflict detection across modes
Documentation:
- Expand DISTRIBUTED_AGENTS.md with complete API reference
- Add troubleshooting guide and security considerations
- Document all supported modes with tools and data formats
UI/CSS:
- Add agent badge styling for remote vs local sources
- Add WiFi and Bluetooth table agent columns
Features:
- Standalone agent server (intercept_agent.py) for remote sensor nodes
- Controller API blueprint for agent management and data aggregation
- Push mechanism for agents to send data to controller
- Pull mechanism for controller to proxy requests to agents
- Multi-agent SSE stream for combined data view
- Agent management page at /controller/manage
- Agent selector dropdown in main UI
- GPS integration for location tagging
- API key authentication for secure agent communication
- Integration with Intercept's dependency checking system
New files:
- intercept_agent.py: Remote agent HTTP server
- intercept_agent.cfg: Agent configuration template
- routes/controller.py: Controller API endpoints
- utils/agent_client.py: HTTP client for agents
- utils/trilateration.py: Multi-agent position calculation
- static/js/core/agents.js: Frontend agent management
- templates/agents.html: Agent management page
- docs/DISTRIBUTED_AGENTS.md: System documentation
Modified:
- app.py: Register controller blueprint
- utils/database.py: Add agents and push_payloads tables
- templates/index.html: Add agent selector section
Smittix