rtl_fm stderr was sent to DEVNULL, hiding the actual failure reason
(rc=1). Now captured and surfaced in the error response. Also drains
rtl_fm stderr during normal operation to prevent pipe blocking.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Use -o - (stdout) instead of -o /dev/null for audio output, as
dsd-fme expects specific output targets. Remove -N flag which may
cause issues in headless mode. Add stderr capture on pipeline
failure for better error messages.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
dsd-fme uses different protocol flags than classic dsd (e.g. -fs for
DMR instead of -fd, -f1 for P25 instead of -fp). Add -N flag to
disable ncurses terminal which is required when reading from stdin pipe.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Check for dsd-fme binary (common fork) before falling back to dsd.
Disable audio output with -o /dev/null to prevent PulseAudio
connection failures when running under sudo.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- DMR/P25 digital voice decoder mode with DSD-FME integration
- WebSDR mode with KiwiSDR audio proxy and websocket-client support
- Listening post waterfall/spectrogram visualization and audio streaming
- Dockerfile updates for mbelib and DSD-FME build dependencies
- New tests for DMR, WebSDR, KiwiSDR, waterfall, and signal guess API
- Chart.js date adapter for time-scale axes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a general-purpose SSTV decoder alongside the existing ISS SSTV mode,
supporting USB/LSB/FM modulation on common amateur radio HF/VHF/UHF
frequencies (14.230 MHz USB, 3.845 MHz LSB, etc.) with auto-detection
of modulation from preset frequency table.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add SDR device reservation to prevent conflicts with other modes, and
capture rtl_fm stderr so actual error messages are reported to the user
instead of a generic exit code.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add defensive typeof checks before referencing the Updater global in
loadUpdateStatus() and checkForUpdatesManual() so the settings panel
shows a helpful message instead of crashing. Also swap script load
order so updater.js loads before settings-manager.js.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace fragile platform-specific WiFi detection with the same
scanner._detect_interfaces() used by the actual scanning code,
eliminating false "No wireless interfaces found" warnings.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Use networksetup instead of deprecated airport utility for macOS WiFi detection
- Fix SDRDevice attribute access (use getattr instead of dict .get())
- Move Detected Threats panel next to RF Signals in 2-column grid
- Always run correlation/identity analysis at sweep end, even if stopped by user
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The sweep loop's WiFi/BT/RF scan processing had unprotected
timeline_manager.add_observation() calls that could crash an entire
scan iteration, silently preventing all device events from reaching
the frontend. Additionally, scan interval timestamps were only updated
at the end of processing, causing tight retry loops on persistent errors.
- Wrap timeline observation calls in try/except for all three protocols
- Move last_*_scan timestamp updates immediately after scan completes
- Add per-device try/except so one bad device doesn't block others
- Emit sweep_progress after WiFi scan for real-time status visibility
- Log warning when WiFi scan returns 0 networks for easier diagnosis
- Add known_device and score_modifier fields to correlation engine
- Add TSCM scheduling, cases, known devices, and advanced WiFi indicators
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Open Notify API (api.open-notify.org) is frequently unreliable,
causing 5-second timeout delays on every ISS position request.
Promote wheretheiss.at as the primary API in both satellite.py
and sstv.py, demoting Open Notify to fallback.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The innerHTML rebuild on every SSE event was destroying and recreating
DOM elements under the cursor, causing rapid mouseenter/mouseleave
cycling. Now defers DOM rebuilds while hovering and debounces rapid
update calls with a 200ms window.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Separate SVG translate positioning from CSS hover scale by nesting
device elements in two groups, preventing the CSS transform from
overriding the position and causing rapid mouseenter/mouseleave cycling.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add missing entries for v2.12.1, v2.13.0, and v2.13.1 to
CHANGELOG.md. Update config.py CHANGELOG highlights to reflect
UI overhaul, signal scanner rewrite, and WiFi client fix.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The /wifi/v2/clients endpoint was returning all clients regardless
of query parameters, because a duplicate route in wifi.py took
precedence over the filtered one in wifi_v2.py. Added bssid,
associated, and min_rssi filtering to the active route.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add retry mechanism (3 attempts) for usb_claim_interface errors when
the SDR device hasn't been fully released by a previous process. Also
kill rtl_power alongside rtl_fm during cleanup and increase the USB
release delay.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
More robust approach:
- align-items: stretch !important on controls-bar
- margin-top: auto on control-group-items to push to bottom
- Specific selector for controls-bar > control-group
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use align-items: stretch on controls-bar to make all control
groups the same height, and justify-content: space-between on
control-group to push content to top/bottom within each box.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Change from stretch to flex-end to ensure control group
bottom edges stay aligned regardless of varying heights.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Change align-items from center to stretch so control groups
of varying heights align at top and bottom instead of floating.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add help modal system with keyboard shortcuts reference
- Add Main Dashboard button in navigation bar
- Make settings modal accessible from all dashboards
- Dashboard CSS improvements and consistency fixes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Display connected clients for access points in detail drawer
- Real-time client updates via SSE streaming
- Client cards show MAC, vendor, RSSI, probed SSIDs, and last seen
- Count badge in Connected Clients header
Other changes:
- Updated aircraft database
- CSS and template refinements
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
