Previously, RTL-SDR devices from SoapySDR were unconditionally skipped,
even if native rtl_test wasn't available. Now:
- Native detection runs first for RTL-SDR and HackRF
- SoapySDR only skips device types that were already found natively
- If native tools aren't available, SoapySDR detection is used as fallback
This fixes the issue where users with only SoapySDR installed couldn't
see their RTL-SDR or HackRF devices.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Airspy support:
- Add AIRSPY to SDRType enum and driver mappings
- Create AirspyCommandBuilder using SoapySDR tools (rx_fm, readsb, rtl_433)
- Register in SDRFactory and add to hardware type dropdown
- Supports Airspy R2/Mini (24MHz-1.8GHz) and HF+ devices
GPS coordinate persistence:
- Save observer location to localStorage when manually entered or via geolocation
- Restore saved coordinates on page load in both index.html and adsb_dashboard.html
- Coordinates are shared between both pages
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Try dump1090-fa, dump1090-mutability, dump1090 variants
- Use pkg_available() to check actual installability
- Skip gracefully on Debian Trixie and other versions without it
- Only show manual install message if not already installed
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- dump1090 is not available in standard Debian repositories
- Show manual installation instructions with FlightAware link
- Add pkg_available() helper for reliable package checks
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Check apt-cache for package availability before installing
- Try dump1090-fa, dump1090-mutability, then dump1090 variants
- Try rtl-433 and rtl433 package names
- Show helpful message with FlightAware install link if dump1090 unavailable
- Update manual instructions with correct package info
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add setup_sudo() to detect root user or check for sudo availability
- Use $SUDO variable instead of hardcoded sudo commands
- Show appropriate commands in error messages based on privilege level
- Exit with helpful message if not root and sudo unavailable
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Automatically install missing SDR, WiFi, and Bluetooth tools on Debian
- Prompt user before installing (can decline for manual instructions)
- Auto-setup RTL-SDR udev rules with user confirmation
- Track missing tools by category (core, wifi, bluetooth)
- Keep manual instructions for macOS, Arch, and other distros
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Check for venv/bin/activate file instead of just venv directory
- Add error handling when python3-venv package is not installed
- Clean up incomplete venv directories from failed attempts
- Provide helpful instructions to install python3-venv
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Add rtl_tcp support for pager and sensor decoding
- Connect to remote RTL-SDR via rtl_tcp server
- New UI toggle and host:port inputs in sidebar
- Supports rtl_fm and rtl_433 with remote devices
- Add remote dump1090 support for ADS-B tracking
- Connect to dump1090 SBS output on remote machine
- New "Remote" checkbox with host:port in ADS-B dashboard
Backend changes:
- Add rtl_tcp_host/port fields to SDRDevice dataclass
- Add is_network property for detecting remote devices
- Update RTLSDRCommandBuilder to use rtl_tcp:host:port format
- Add create_network_device() to SDRFactory
- Add validate_rtl_tcp_host/port validation functions
- Update pager, sensor, and adsb routes to accept remote params
Note: dump1090 doesn't support rtl_tcp directly - use remote
dump1090's SBS output (port 30003) for remote ADS-B tracking.
- Fix escaped newline in CSV export causing literal \n in output
- Clear allMessages array when clearing messages so CSV/JSON exports
reflect current data after clearing
Moved CSS files for ADS-B and satellite dashboards, as well as the main index page. Updated screenshot image paths in the README and moved screenshot files to a dedicated images/screenshots directory. Adjusted HTML templates to use the new path for the CSS files.
- Add GPS dongle support with NMEA parsing (utils/gps.py, routes/gps.py)
- Add GPS device selector to ADS-B and Satellite observer location sections
- Add GPS dongle option to ADS-B dashboard
- Fix Python 3.7/3.8 compatibility by adding 'from __future__ import annotations'
to all SDR module files (fixes TypeError: 'type' object is not subscriptable)
- Add pyserial to requirements.txt
- Update README with GPS dongle documentation and troubleshooting
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Added toggleAircraftRadar() function and onchange handler to the
checkbox. Also updated switchMode() to respect the checkbox state
when switching to aircraft mode.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The signal handler was intercepting SIGINT but not exiting, causing
the application to continue running. Now re-raises KeyboardInterrupt
so Flask can handle shutdown properly.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Satellite dashboard: Add header stat badges, bottom controls bar,
streamlined sidebar with countdown/telemetry/pass list panels
- Main dashboard: Add UTC clock, mode-specific header stats with
real-time syncing, active mode indicator with pulse animation
- Controls bar: Reorganize into logical groups (Mode, Export),
gradient background, styled status indicator
- Panel styling: Gradient backgrounds, indicator dots on headers,
Orbitron font for titles, rounded corners throughout
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Aircraft Trails: altitude-based color gradient with fading opacity
- Virtual Radar Scope (PPI): canvas-based with sweep animation, range rings, compass rose
- UI Overhaul: controls bar at bottom, compact stats in header, MAP/RADAR view toggle
- Range selector syncs with both map rings and radar scope
- Click-to-select aircraft works in both map and radar views
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The validation now returns an integer, but subprocess command
arguments must be strings.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Security:
- Add input validation for all API endpoints (frequency, lat/lon, device, gain, ppm)
- Add HTML escaping utility to prevent XSS attacks
- Add path traversal protection for log file configuration
- Add proper HTTP status codes for error responses (400, 409, 503)
Performance:
- Reduce SSE keepalive overhead (30s interval instead of 1s)
- Add centralized SSE stream utility with optimized keepalive
- Add DataStore class for thread-safe data with automatic cleanup
New Features:
- Add data export endpoints (/export/aircraft, /export/wifi, /export/bluetooth)
- Support for both JSON and CSV export formats
- Add process cleanup on application exit (atexit handlers)
- Label Iridium module as demo mode with clear warnings
Code Quality:
- Create utils/validation.py for centralized input validation
- Create utils/sse.py for SSE stream utilities
- Create utils/cleanup.py for memory management
- Add safe_terminate() and register_process() for process management
- Improve error handling with proper logging throughout routes
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
GPS geolocation only works on HTTPS or localhost. Added manual lat/lon
input fields so users can enter their coordinates directly when
accessing the app over HTTP on a local network.
- Added latitude/longitude input fields to both ADS-B tab and dashboard
- GPS button now checks for secure context before attempting geolocation
- Shows helpful error message directing users to use manual input
- Input fields update observer location and redraw range rings on change
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New features for both ADS-B tab and dashboard:
1. Range Rings - Concentric circles at 25, 50, 100, 150, 200nm showing
distance from observer location with dashed styling and labels
2. Statistics Panel - Tracks:
- Max range achieved (with aircraft that achieved it)
- Total unique aircraft seen this session
- Messages per second rate
- Busiest hour of tracking
3. Geolocation Button - Gets user's actual GPS location to:
- Center the map on their position
- Calculate accurate distances for range statistics
- Position range rings correctly
4. Reception Statistics - Real-time msg/sec counter to monitor
receiver performance
All features work on both the ADS-B tab and full-screen dashboard.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
