When the backend has an active DMR session but the frontend lost track
(page refresh, broken flags causing silent running), clicking Start
returned 409 with no recovery path. Now the frontend resyncs on
"Already running" responses and checks backend status on tab activation.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Enable sending discovered frequencies from the Listening Post scanner,
signal identification panel, and waterfall display directly to Pager,
433 Sensor, or RTLAMR decoder modes with one click.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Remove all GSM cellular intelligence features including tower scanning,
signal monitoring, rogue detection, crowd density analysis, and
OpenCellID integration across routes, templates, utils, tests, and
build configuration.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Parse tshark GSM field values with int(value, 0) instead of int(value)
to auto-detect hex 0x-prefixed output (e.g. 0x039e for TMSI/LAC/CID).
Without this, every tshark line with hex values fails to parse, causing
0 devices to be captured during monitoring.
Also add API Keys tab to Settings modal for configuring OpenCellID key
via the UI (in addition to env var), with status display and usage bar.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move waterfall controls from the sidebar into a function-strip bar inside
#listeningPostVisuals so they sit directly above the waterfall canvas.
Also fix the "SDR device in use" error when clicking a waterfall frequency
to listen — the WebSocket waterfall's device claim wasn't being released
before the audio start request because the backend cleanup hadn't finished.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Zooming caused "I/Q capture process exited immediately" because the client
closed the WebSocket and opened a new one, racing with the old rtl_sdr
process releasing the USB device. Now zoom/retune sends a start command on
the existing WebSocket, and the server adds a USB release delay plus retry
loop when restarting capture within the same connection.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace the batch rtl_power SSE pipeline with continuous I/Q streaming
via WebSocket for smooth ~25fps waterfall display. The server captures
raw I/Q samples (rtl_sdr/rx_sdr), computes Hann-windowed FFT, and
sends compact binary frames (1035 bytes vs ~15KB JSON, 93% reduction).
Client falls back to existing SSE path if WebSocket is unavailable.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Waterfall clicks now auto-select the correct modulation for the frequency
band (e.g., WFM for FM broadcast, AM for airband) instead of using whatever
modulation was last selected. Adds a hover tooltip showing frequency and
suggested modulation. Fixes the kill-all notification to show a clean
"All processes stopped" message instead of listing "bluetooth_scanner".
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a phosphor-persistence waveform scope showing audio RMS/peak
levels during ISS SSTV and General SSTV decoding, matching the
existing pager scope pattern with a purple color scheme.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Reverts IQ pipeline and removes syncWaterfallToFrequency calls from
pager, sensor, rtlamr, DMR, SSTV, and SSTV general modes. Waterfall
is now exclusive to listening post mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace rtl_fm/rtl_433 with rtl_sdr for raw IQ capture when available,
enabling a Python IQ processor to compute FFT for the waterfall while
simultaneously feeding decoded data to multimon-ng (pager) or rtl_433
(sensor). Falls back to the legacy pipeline when rtl_sdr is unavailable.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Kill audio pipeline when startup produces no data instead of leaving
zombie processes running
- Skip unnecessary 1s USB release delay when no processes were active
- Remove racy fresh=1 pipeline restart from stream endpoint
- Await stopScanner() before starting direct listen to prevent race
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The Receiver Count section had no <h3> so it didn't get collapsible
panel styling, rendering as a small out-of-place rectangle. The count
is already shown in the main receiver list panel so this was redundant.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Static minZoom: 2 wasn't enough for tall containers. Now calculate
minZoom from actual container height so tiles always cover the visible
area. Also set map background to match CartoDB dark tile ocean color
so any remaining edge at extreme latitudes blends seamlessly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add maxBounds to limit vertical panning to ±85° latitude and set
minZoom to 2 so tiles always cover the visible area. Prevents the
large black bands above and below the map tiles.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The dmrRawOutput div was rendering garbled box-drawing characters from
the dsd-fme ASCII art banner below the signal activity canvas. Remove
the div and filter banner lines (box-drawing chars, version info) in
the parser so they never become events.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The stream thread used a blocking readline() with no timeout, so once
DSD finished outputting its startup banner there were no more events
until actual signal activity. The frontend decayed to zero and appeared
dead. If DSD crashed, the synthesizer state never transitioned to
'stopped' so there was no visual or textual indication of failure.
- Use select() with 1s timeout on DSD stderr to avoid indefinite block
- Send heartbeat events every 3s while decoder is alive but idle
- Detect DSD crashes: capture exit code and remaining stderr, send as
'crashed' status with details and show notification to user
- Frontend properly transitions synthesizer to 'stopped' on process
death (was only happening on user-initiated stop)
- Increase idle breathing amplitude so LISTENING state is clearly
visible (0.12 +/- 0.06 vs old 0.05 +/- 0.035)
- Release device reservation on crash, not just user stop
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
DMR was missing checkDeviceAvailability/reserveDevice/releaseDevice
calls that other modes (SSTV, listening post) use, so the device
dropdown showed device 0 as available even when another process held
it. Also detect USB claim errors from rtl_fm and surface a clear
message telling the user to pick a different device.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The DSD stderr parser had regex ordering bugs that swallowed voice and
call events as bare slot events, and only matched classic dsd output
format (not dsd-fme). Unmatched lines were silently dropped, leaving
the signal activity panel with nothing to display.
- Reorder regex checks: TG/Src before voice before slot
- Support dsd-fme comma-separated format (TG: x, Src: y)
- Make bare slot regex strict (only standalone "Slot N" lines)
- Forward unmatched DSD lines as raw events for diagnostics
- Add LISTENING state to signal activity panel for raw output
- Show raw decoder output text below synthesizer canvas
- Fix test mocks for find_dsd() tuple return value
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
SSTV was not claiming/releasing SDR devices through the centralized
registry, so the device state panel always showed the device as idle
during SSTV use. Added claim_sdr_device/release_sdr_device on the
backend and reserveDevice/releaseDevice on the frontend, matching the
pattern used by all other modes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Users can now manage decoded SSTV images with download and delete actions
accessible from hover overlays on gallery cards, the full-size image modal
toolbar, and a "Clear All" button in the gallery header. Both ISS and
General SSTV modes are supported.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The decode canvas was always black because nothing drew on it. Now the
backend encodes partial JPEG snapshots every 5% progress and the frontend
uses an <img> tag with in-place DOM updates instead of recreating innerHTML
on every SSE event.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Shows the current VIS detection state machine position (Idle, Leader,
Break, Start bit, Data bits, etc.) in the signal monitor. This helps
diagnose why decoding may not be starting - e.g. if the VIS detector
is stuck in Idle despite a leader tone being present, the signal may
not contain a valid VIS header.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The Doppler tracking thread emits detecting events every 5s from a
separate thread, unaware of decode state. The previous to_dict() change
included signal_level for ALL detecting events, causing the frontend to
replace the decode progress canvas with the signal monitor mid-decode.
Fix: use None as default for signal_level so only signal-metrics events
(which explicitly set the value) include the field. Also add a frontend
guard to ignore detecting events while the UI is in decoding state.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Shows RMS audio level bar and SSTV tone classification (leader/sync/noise)
via SSE during detecting mode, replacing the static "Listening..." state
with actionable signal feedback.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
slowrx is a GTK GUI app that doesn't support CLI usage, so the SSTV
decoder was silently failing. This replaces it with a pure Python
implementation using numpy and Pillow that supports Robot36/72,
Martin1/2, Scottie1/2, and PD120/180 modes via VIS header auto-detection.
Key implementation details:
- Generalized Goertzel (DTFT) for exact-frequency tone detection
- Vectorized batch Goertzel for real-time pixel decoding performance
- Overlapping analysis windows for short-window frequency estimation
- VIS header detection state machine with parity validation
- Per-line sync re-synchronization for drift tolerance
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
getBoundingClientRect on the canvas itself (sized via CSS width:100%)
instead of parentElement with arbitrary offset, preventing zero-width
canvas when flex layout timing varies.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Event-driven spring-physics bar visualization reacting to SSE events
(sync/call/voice) with HSL color coding and center-outward ripple effects.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- DMR/P25 digital voice decoder mode with DSD-FME integration
- WebSDR mode with KiwiSDR audio proxy and websocket-client support
- Listening post waterfall/spectrogram visualization and audio streaming
- Dockerfile updates for mbelib and DSD-FME build dependencies
- New tests for DMR, WebSDR, KiwiSDR, waterfall, and signal guess API
- Chart.js date adapter for time-scale axes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a general-purpose SSTV decoder alongside the existing ISS SSTV mode,
supporting USB/LSB/FM modulation on common amateur radio HF/VHF/UHF
frequencies (14.230 MHz USB, 3.845 MHz LSB, etc.) with auto-detection
of modulation from preset frequency table.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add defensive typeof checks before referencing the Updater global in
loadUpdateStatus() and checkForUpdatesManual() so the settings panel
shows a helpful message instead of crashing. Also swap script load
order so updater.js loads before settings-manager.js.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The sweep loop's WiFi/BT/RF scan processing had unprotected
timeline_manager.add_observation() calls that could crash an entire
scan iteration, silently preventing all device events from reaching
the frontend. Additionally, scan interval timestamps were only updated
at the end of processing, causing tight retry loops on persistent errors.
- Wrap timeline observation calls in try/except for all three protocols
- Move last_*_scan timestamp updates immediately after scan completes
- Add per-device try/except so one bad device doesn't block others
- Emit sweep_progress after WiFi scan for real-time status visibility
- Log warning when WiFi scan returns 0 networks for easier diagnosis
- Add known_device and score_modifier fields to correlation engine
- Add TSCM scheduling, cases, known devices, and advanced WiFi indicators
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The innerHTML rebuild on every SSE event was destroying and recreating
DOM elements under the cursor, causing rapid mouseenter/mouseleave
cycling. Now defers DOM rebuilds while hovering and debounces rapid
update calls with a 200ms window.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Separate SVG translate positioning from CSS hover scale by nesting
device elements in two groups, preventing the CSS transform from
overriding the position and causing rapid mouseenter/mouseleave cycling.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add help modal system with keyboard shortcuts reference
- Add Main Dashboard button in navigation bar
- Make settings modal accessible from all dashboards
- Dashboard CSS improvements and consistency fixes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Display connected clients for access points in detail drawer
- Real-time client updates via SSE streaming
- Client cards show MAC, vendor, RSSI, probed SSIDs, and last seen
- Count badge in Connected Clients header
Other changes:
- Updated aircraft database
- CSS and template refinements
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
