The /killall endpoint was not resetting the ADS-B tracking state:
- Added dump1090 to the list of processes to kill
- Reset adsb_process to None
- Reset adsb_using_service flag to False
This fixes the "ADS-B tracking already active" error after using
kill all processes and trying to start tracking again.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The previous logic split the track whenever longitude jumped by more
than 180°, which could happen in cases other than actual antimeridian
crossings, causing gaps in the middle of the orbit track.
New logic only splits when one longitude is > 90° and the other is
< -90°, which specifically identifies crossings of the ±180° line.
Also changed segment minimum from 2 to 1 point to preserve all data.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Keep trackLine (visible pass trajectory) when drawing orbit track
- Make visible pass line solid (weight 4, full opacity) vs orbit track
(dashed, weight 2, 60% opacity) for clear visual distinction
- Only fit bounds on initial pass selection, not periodic updates
- Prevents map from re-zooming every 5 seconds
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The orbit track was being added correctly but wasn't visible because
the map was zoomed to the pass ground track (a small arc). Now the map
fits bounds to include the full orbit track plus observer location
after adding the orbit layer.
Also removed debug console.log statements.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Temporary logging to diagnose why dashboard isn't showing satellite
position and orbit track like the tab does.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove duplicate updateRealTimePositions() call from onSatelliteChange()
since calculatePasses() already calls selectPass() which triggers it
- Clear passes and selectedPass when changing satellites to prevent
using stale data
- Clear map layers when changing satellites
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When removing map layers, set references to null so new markers get
created properly on position updates. Also clear orbit track lines
when changing passes.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Same fix as dashboard: LayerGroup doesn't have getBounds(), so collect
all coordinates and create bounds manually using L.latLngBounds().
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The polar plot now redraws the pass trajectory before overlaying the
current position indicator, matching the dashboard behavior.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Bug: Both files were fetching orbit data for the dropdown-selected
satellite instead of the satellite from the selected pass.
Fixes:
- satellite_dashboard.html: updateRealTimePositions() now uses
passes[selectedPass].satellite instead of selectedSatellite
- index.html: updateRealTimePosition() now ensures the selected
pass's satellite is included in the position request, and added
includeTrack: true to get orbit data
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Added updateRealTimePositions() call to selectPass() so the full orbit
track is fetched immediately when a pass is selected, not just on the
5-second interval.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
LayerGroup doesn't have getBounds() like polyline does. Collect all
coordinates and create bounds manually using L.latLngBounds().
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix property name mismatch: backend returns 'track' but index.html
expected 'orbitTrack'
- Start position updates when a pass is selected (was never called)
- Fetch position immediately on pass selection for instant orbit display
- Dashboard: always show full orbit track, not just when no pass selected
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix polar plot trajectory not displaying: backend returns 'el'/'az'
properties but code expected 'elevation'/'azimuth'. Updated both
drawPolarPlot() and drawPolarPlotPopout() to handle both formats.
- Fix ground track lines crossing entire map: added antimeridian
crossing detection to split orbit tracks into segments, preventing
lines from drawing across the map when crossing 180° longitude.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add aircraft filter dropdown (All/Military/Civil/Emergency) to both
main dashboard and full-screen ADS-B dashboard
- Military detection uses ICAO hex ranges and callsign prefixes
- Military aircraft display olive drab markers and MIL badges
- Fix aircraft icon rotation in adsb_dashboard.html by replacing
emoji (✈) with SVG icon - emoji had inconsistent orientation
across platforms causing incorrect heading display
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Move isWifiRunning and isBtRunning declarations to top of script
to fix 'Cannot access before initialization' errors
- Update handleWifiNetwork hook to use renamed handleWifiNetworkImmediate
- Remove duplicate variable declarations
- Preserve selected pass ground track when updateRealTimePositions runs
- Only show real-time orbit track when no pass is selected
- Draw pass trajectory on polar plot with current position overlay
- Add drawCurrentPositionOnPolar helper for position marker
- Increase pass list height (250px → 400px max) to show more passes
- Add pass count to header (e.g., "UPCOMING PASSES (7)")
- Make pass items slightly more compact
- Add argparse with -p/--port, -H/--host, -d/--debug options
- Add --check-deps flag to verify tool availability
- Make host and port configurable via command line
- Consolidate README with Quick Start section
- Simplify installation into side-by-side table format
- Add Configuration section for environment variables
- Remove verbose API Endpoints and Stats Bar sections
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add requestAnimationFrame batching to WiFi SSE handler to prevent
freeze with many access points
- Add requestAnimationFrame batching to Bluetooth SSE handler to
prevent freeze with many devices
- Move channel graph updates to batched frame instead of per-network
- Throttle probe analysis updates to every 2 seconds
- Optimize aircraft tracking in main page with marker state caching,
150 marker limit, and throttled auto-fit bounds
- Add "Full Screen Dashboard" links to aircraft and satellite modes
- Add "Main Dashboard" links to ADSB and satellite dashboards
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Use requestAnimationFrame to throttle expensive rendering operations.
Previously every SSE message triggered full UI re-renders causing
browser unresponsiveness with 50+ aircraft.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Now updates existing cards instead of creating duplicates when
receiving updates for the same ICAO.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Backend was sending 'alt' but frontend expected 'altitude'.
Standardized on 'altitude' throughout.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Tracks connection state, message counts, and aircraft data
to help diagnose why data might not be flowing.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Frontend expects status='started' but backend was returning 'success'.
This caused the frontend to show "Error: ADS-B tracking started".
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
If dump1090 is already running (e.g., user started it manually),
detect it via port 30003 and connect instead of reporting an error.
Also cleans up stale process state before starting.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Flask apps may run with a restricted PATH that doesn't include
/usr/local/bin. Now explicitly checks common installation locations.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Users building dump1090-fa from source (e.g., on Debian Trixie where
dump1090-mutability is unavailable) can now use it with ADS-B tracking.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Split monolithic intercept.py (15k lines) into modular structure:
- routes/ - Flask blueprints for each feature
- templates/ - Jinja2 HTML templates
- data/ - OUI database, satellite TLEs, detection patterns
- utils/ - dependencies, process management, logging
- config.py - centralized configuration with env var support
- Add type hints to function signatures
- Replace bare except clauses with specific exceptions
- Add proper logging module (replaces print statements)
- Add environment variable support (INTERCEPT_* prefix)
- Add test suite with pytest
- Add Dockerfile for containerized deployment
- Add pyproject.toml with ruff/black/mypy config
- Add requirements-dev.txt for development dependencies
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The trajectory line now only appears when the satellite is currently
making the selected pass, fixing the confusing mismatch between the
predicted path and real-time position.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Split orbit track into segments when longitude jumps > 180° to prevent
Leaflet from drawing lines across the entire map at the antimeridian.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Clear trackLine, satMarker, and orbitTrack before adding new ones
- Remove duplicate cleanup code
- Clear pass track when showing live orbit to avoid confusion
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Dashboard expects 'alt' but backend was sending 'altitude'.
Fixed in MSG,3 and MSG,5 parsing.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Return 'success' status instead of 'started'
- Return 'already_running' status instead of 'error' when already running
- Add console logging in dashboard for debugging
- Add backend print statements for debugging
- Better error message display in alerts
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Accept 'started' status in addition to 'success' and 'already_running'
- Show actual status in error message for debugging
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- New route at /adsb/dashboard for standalone aircraft tracking
- Green-themed radar display with animated grid background
- Live map with aircraft markers colored by altitude
- Aircraft list sorted by altitude with callsign, speed, heading
- Selected aircraft detail panel with full telemetry
- Statistics panel (total, with position, max/avg altitude)
- Start/Stop tracking button
- Auto-cleanup of stale aircraft after 60 seconds
- Responsive layout for different screen sizes
- Uses existing /adsb/stream SSE endpoint for real-time data
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Convert all skyfield/numpy values to float() in /satellite/position
- Convert all skyfield/numpy values to float() in /satellite/predict
- Use bool() for visible flag
- Use int() for duration
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Backend: trajectory uses 'el'/'az' instead of 'elevation'/'azimuth'
- Backend: added 'norad' and 'startTimeISO' fields to pass data
- Backend: added colors for NOAA-20 and METEOR-M2-3
- Frontend: fixed renderPassList to use 'satellite' and 'startTime'
- Frontend: fixed updateCountdown to use 'startTimeISO' and 'satellite'
- Frontend: fixed updateStats to count satellites object keys
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Real-time position updates now use selectedSatellite directly
- Added drawPolarPlotWithPosition() for live satellite position display
- Fixed /satellite/position endpoint to accept NORAD IDs
- Fixed parameter names (latitude/longitude) consistency
- Fixed response field name (track instead of orbitTrack)
- Shows satellite name and elevation on polar plot
- Glowing marker effect on current position
- Shows "BELOW HORIZON" indicator when satellite not visible
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Added dropdown in header to select target satellite
- Styled hi-tech selector with cyan glow effects
- Updates tracking status indicator on satellite change
- Added NOAA-20 and METEOR-M2-3 satellites
- Dashboard now calculates passes for selected satellite only
- Extended prediction window to 48 hours
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Simplified grid to single row layout
- Fixed sidebar to not span multiple rows
- Lowered responsive breakpoint to 1200px
- Fixed panel flex-shrink behavior
- Better mobile breakpoint at 800px
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix parameter mismatch: accept both latitude/longitude and lat/lon
- Add NORAD ID to satellite name mapping for dashboard compatibility
- Widen sidebar from 350px to 420px for better readability
- Make sidebar scrollable to access all panels
- Add responsive breakpoints for different screen sizes
- Prevent telemetry values from wrapping
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Animated grid background with scan line effect
- Real-time polar plot with satellite trajectory
- Ground track map with Leaflet
- Countdown timer to next pass
- Live telemetry display
- Upcoming passes list with quality badges
- Observer location with GPS support
- Auto-updates every 5 seconds
- Responsive layout for different screens
Access via /satellite/dashboard
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
