bump versions to 0.11.2

When merging WebDAV and GPS features, we forgot to update the WebDAV
feature to also upload the GPS files.

WebDAV had hardcoded knowledge of which files exist and its own FileKind
enum. Move the FileKind enum into QMDL store so that webdav can be
agnostic over which files belong to a recording, so this is less likely
to happen again.

(This refactor was AI-assisted)

.cargo/audit.toml

@@ -8,4 +8,8 @@ ignore = [
     # user-input. we could get rid of this warning by disabling the image
     # dependency in adb-client.
     "RUSTSEC-2024-0436",
+    # rustls-webpki 0.102.8 CRL Distribution Point flaw (via rustls-rustcrypto).
+    # Only affects dev builds, production firmware uses ring-tls.
+    # TODO: Remove once rustls-rustcrypto releases a version newer than 0.0.2-alpha.
+    "RUSTSEC-2026-0049",
 ]

.cargo/config.toml

@@ -1,10 +1,16 @@
 [alias]
-# Build the daemon with "firmware" profile and "ring" TLS backend.
-# Requires a cross-compiler (see github actions workflows) and is very slow to build.
-build-daemon-firmware = "build -p rayhunter-daemon --bin rayhunter-daemon --target armv7-unknown-linux-musleabihf --profile firmware --no-default-features --features ring-tls"
+# Build the daemon with "firmware" profile and post-quantum TLS backend.
+# Needs an arm-linux-musleabihf cross-compiler in PATH, e.g. a toolchain
+# from https://musl.cc, or run inside messense/rust-musl-cross:armv7-musleabihf
+# (which is what CI does, see .github/workflows/main.yml).
+build-daemon-firmware = "build -p rayhunter-daemon --bin rayhunter-daemon --target armv7-unknown-linux-musleabihf --profile firmware --no-default-features --features pq-tls"
 # Build the daemon with "firmware-devel" profile and "rustcrypto" backend.
 # Works with just the Rust toolchain, and is medium-slow to build. Binaries are slightly larger.
 build-daemon-firmware-devel = "build -p rayhunter-daemon --bin rayhunter-daemon --target armv7-unknown-linux-musleabihf --profile firmware-devel"
+# Build rootshell for firmware
+build-rootshell-firmware = "build -p rootshell --bin rootshell --target armv7-unknown-linux-musleabihf --profile firmware"
+# Build rootshell for development
+build-rootshell-firmware-devel = "build -p rootshell --bin rootshell --target armv7-unknown-linux-musleabihf --profile firmware-devel"
 
 [target.aarch64-apple-darwin]
 linker = "rust-lld"

.gitattributes

@@ -7,3 +7,4 @@
 dist/config.toml.in eol=lf
 dist/scripts/misc-daemon eol=lf
 dist/scripts/rayhunter_daemon eol=lf
+scripts/*.sh eol=lf

.github/ISSUE_TEMPLATE/config.yml

@@ -1,5 +1,7 @@
-blank_issues_enabled: true
+blank_issues_enabled: false
 contact_links:
+  - name: Frequently Asked Questions
+    url: https://efforg.github.io/rayhunter/faq.html
   - name: Questions and community
     url: https://efforg.github.io/rayhunter/support-feedback-community.html
     about: If you're having trouble using Rayhunter and aren't sure you've found a bug or request for a new feature, please first try asking for help on GitHub discussions or Mattermost

.github/dependabot.yml

@@ -0,0 +1,53 @@
+# open-pull-requests-limit is used to disable automated version updates
+# security updates are unaffected. see
+# * https://docs.github.com/en/code-security/how-tos/secure-your-supply-chain/secure-your-dependencies/configuring-dependabot-version-updates#disabling-dependabot-version-updates
+# * https://docs.github.com/en/code-security/reference/supply-chain-security/dependabot-options-reference#open-pull-requests-limit-
+version: 2
+updates:
+  # Rust dependencies
+  - package-ecosystem: "cargo"
+    directory: "/"
+    schedule:
+      interval: "weekly"
+    open-pull-requests-limit: 0
+    groups:
+      security:
+        applies-to: "security-updates"
+        patterns:
+          - "*"
+
+  # Python dependencies
+  - package-ecosystem: "pip"
+    directory: "/tools"
+    schedule:
+      interval: "weekly"
+    open-pull-requests-limit: 0
+    groups:
+      security:
+        applies-to: "security-updates"
+        patterns:
+          - "*"
+
+  # daemon/web Node.js dependencies
+  - package-ecosystem: "npm"
+    directory: "/daemon/web"
+    schedule:
+      interval: "weekly"
+    open-pull-requests-limit: 0
+    groups:
+      security:
+        applies-to: "security-updates"
+        patterns:
+          - "*"
+
+  # installer-gui Node.js dependencies
+  - package-ecosystem: "npm"
+    directory: "/installer-gui"
+    schedule:
+      interval: "weekly"
+    open-pull-requests-limit: 0
+    groups:
+      security:
+        applies-to: "security-updates"
+        patterns:
+          - "*"

.github/pull_request_template.md

@@ -1,7 +1,13 @@
 ## Pull Request Checklist
 
-- [ ] The Rayhunter team has recently expressed interest in reviewing a PR for this. If not, this PR may be closed due our limited resources and need to prioritize how we spend them.
+- [ ] The Rayhunter team has recently expressed interest in reviewing a PR for this.
+  - If not, this PR may be closed due our limited resources and need to prioritize how we spend them.
 - [ ] Added or updated any documentation as needed to support the changes in this PR.
-- [ ] Code has been linted and run through `cargo fmt`
-- [ ] If any new functionality has been added, unit tests were also added
-- [ ] [./CONTRIBUTING.md](../CONTRIBUTING.md) has been read
+- [ ] Code has been linted and run through `cargo fmt`.
+- [ ] If any new functionality has been added, unit tests were also added.
+- [ ] [CONTRIBUTING.md](https://github.com/EFForg/rayhunter/blob/main/CONTRIBUTING.md) has been read.
+- [ ] Your pull request is fewer than ~400 lines of code.
+
+You must check one of:
+- [ ] No generative AI (including LLMs) tools were used to create this PR.
+- [ ] Generative AI was used to create this PR. I certify that I have read and understand the code, and *that all comments and descriptions were authored by myself* and are not the product of generative AI.

.github/workflows/main.yml

@@ -11,6 +11,9 @@ env:
   CARGO_TERM_COLOR: always
   FILE_ROOTSHELL: ../../rootshell/rootshell
   FILE_RAYHUNTER_DAEMON: ../../rayhunter-daemon/rayhunter-daemon
+  FILE_WPA_SUPPLICANT: ../../wpa-supplicant/wpa_supplicant
+  FILE_WPA_CLI: ../../wpa-supplicant/wpa_cli
+  FILE_IW: ../../wpa-supplicant/iw
   RUSTFLAGS: "-Dwarnings"
 
 jobs:
@@ -20,13 +23,15 @@ jobs:
     permissions:
       contents: read
     outputs:
-      code_changed: ${{ steps.files_changed.outputs.code_count }}
-      daemon_changed: ${{ steps.files_changed.outputs.daemon_count }}
-      web_changed: ${{ steps.files_changed.outputs.web_count }}
-      docs_changed: ${{ steps.files_changed.outputs.docs_count }}
-      installer_changed: ${{ steps.files_changed.outputs.installer_count }}
-      installer_gui_changed: ${{ steps.files_changed.outputs.installer_gui_count }}
-      rootshell_changed: ${{ steps.files_changed.outputs.rootshell_count }}
+      code_changed: ${{ steps.files_changed.outputs.code_count != '0' }}
+      daemon_changed: ${{ steps.files_changed.outputs.daemon_count != '0' }}
+      daemon_needed: ${{ steps.files_changed.outputs.daemon_count != '0' || steps.files_changed.outputs.installer_build != '0' }}
+      web_changed: ${{ steps.files_changed.outputs.web_count != '0' }}
+      docs_changed: ${{ steps.files_changed.outputs.docs_count != '0' || steps.files_changed.outputs.daemon_count != '0' }}
+      installer_build: ${{ steps.files_changed.outputs.installer_build != '0' }}
+      installer_changed: ${{ steps.files_changed.outputs.installer_count != '0' }}
+      installer_gui_changed: ${{ steps.files_changed.outputs.installer_gui_count != '0' }}
+      rootshell_needed: ${{ steps.files_changed.outputs.rootshell_count != '0' || steps.files_changed.outputs.installer_build != '0' }}
     steps:
       - uses: actions/checkout@v4
         with:
@@ -37,14 +42,20 @@ jobs:
         run: |
           lcommit=${{ github.event.pull_request.base.sha || 'origin/main' }}
 
-          # If we are on main, or if these workflow files are being changed, run everything
-          if [ ${GITHUB_REF} = 'refs/heads/main' ] || git diff --name-only $lcommit..HEAD | grep -qe ^.github/workflows/ -e ^.cargo
+          # We rebuild everything if any of these conditions hold:
+          # * We are on main
+          # * Changes are made to github workflows
+          # * A cargo-workspace file changed (lockfile or .cargo), as that could affect any crate anywhere
+          # * Something from the script or dist folder changed (could be gated to installer, but some scripts like build_wpa_supplicant are part of the build process)
+          # * #build-all was used by the user to explicitly ask for this
+          if [ ${GITHUB_REF} = 'refs/heads/main' ] || git diff --name-only $lcommit..HEAD | grep -qe ^.github/workflows/ -e ^.cargo -e '^Cargo\.lock$' -e '^Cargo\.toml$' -e ^dist/ -e ^scripts/ || git log -1 --format='%s %b' | grep -qF '#build-all'
           then
             echo "building everything"
             echo code_count=forced >> "$GITHUB_OUTPUT"
             echo daemon_count=forced >> "$GITHUB_OUTPUT"
             echo web_count=forced >> "$GITHUB_OUTPUT"
             echo docs_count=forced >> "$GITHUB_OUTPUT"
+            echo installer_build=forced >> "$GITHUB_OUTPUT"
             echo installer_count=forced >> "$GITHUB_OUTPUT"
             echo installer_gui_count=forced >> "$GITHUB_OUTPUT"
             echo rootshell_count=forced >> "$GITHUB_OUTPUT"
@@ -53,15 +64,25 @@ jobs:
             echo "daemon_count=$(git diff --name-only $lcommit...HEAD | grep -e ^daemon -e ^lib -e ^telcom-parser | wc -l)" >> "$GITHUB_OUTPUT"
             echo "web_count=$(git diff --name-only $lcommit...HEAD | grep -e ^daemon/web | wc -l)" >> "$GITHUB_OUTPUT"
             echo "docs_count=$(git diff --name-only $lcommit...HEAD | grep -e ^book.toml -e ^doc | wc -l)" >> "$GITHUB_OUTPUT"
-            echo "installer_count=$(git diff --name-only $lcommit...HEAD | grep -e ^installer/ | wc -l)" >> "$GITHUB_OUTPUT"
-            echo "installer_gui_count=$(git diff --name-only $lcommit...HEAD | grep -e ^installer-gui | wc -l)" >> "$GITHUB_OUTPUT"
             echo "rootshell_count=$(git diff --name-only $lcommit...HEAD | grep -e ^rootshell | wc -l)" >> "$GITHUB_OUTPUT"
+
+            installer_count=$(git diff --name-only $lcommit...HEAD | grep -e ^installer/ | wc -l)
+            installer_gui_count=$(git diff --name-only $lcommit...HEAD | grep -e ^installer-gui | wc -l)
+
+            if [ $installer_count != "0" ] || [ $installer_gui_count != "0" ]; then
+              echo "installer_build=1" >> "$GITHUB_OUTPUT"
+            else
+              echo "installer_build=0" >> "$GITHUB_OUTPUT"
+            fi
+
+            echo "installer_count=$installer_count" >> "$GITHUB_OUTPUT"
+            echo "installer_gui_count=$installer_gui_count" >> "$GITHUB_OUTPUT"
           fi
 
   mdbook_test:
     name: Test mdBook Documentation builds
     needs: files_changed
-    if: needs.files_changed.outputs.docs_changed != '0'
+    if: needs.files_changed.outputs.docs_changed == 'true'
     runs-on: ubuntu-latest
     permissions:
       contents: read
@@ -69,25 +90,25 @@ jobs:
       - uses: actions/checkout@v4
         with:
           persist-credentials: false
+      - uses: Swatinem/rust-cache@v2
       - name: Install mdBook
         run: |
           cargo install mdbook --no-default-features --features search --vers "^0.4" --locked
       - name: Test mdBook
         run: mdbook test
 
-  mdbook_publish:
-    name: Publish mdBook to Github Pages
+  mdbook_build:
+    name: Build mdBook for Github Pages
     needs: mdbook_test
     if: ${{ github.ref == 'refs/heads/main' }}
     permissions:
-      pages: write
       contents: write
-      id-token: write
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
         with:
           persist-credentials: false
+      - uses: Swatinem/rust-cache@v2
       - name: Install mdBook
         run: |
           cargo install mdbook --no-default-features --features search --vers "^0.4" --locked
@@ -95,18 +116,15 @@ jobs:
       - name: Build mdBook
         run: mdbook build
 
-      - name: Setup Pages
-        uses: actions/configure-pages@v4
       - name: Upload artifact
-        uses: actions/upload-pages-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
+          name: book
           path: book
-      - name: Deploy to Github Pages
-        uses: actions/deploy-pages@v4
 
   check_and_test:
     needs: files_changed
-    if: needs.files_changed.outputs.code_changed != '0'
+    if: needs.files_changed.outputs.code_changed == 'true'
     runs-on: ubuntu-latest
     permissions:
       contents: read
@@ -126,13 +144,13 @@ jobs:
         npm install
         npm run build
         popd
-        NO_FIRMWARE_BIN=true cargo check --verbose
+        cargo check --verbose
     - name: Run tests
       run: |
-        NO_FIRMWARE_BIN=true cargo test --verbose
+        cargo test --verbose
     - name: Run clippy
       run: |
-        NO_FIRMWARE_BIN=true cargo clippy --verbose
+        cargo clippy --verbose
 
   installer_gui_check:
     # we test the GUI installer separately to:
@@ -140,7 +158,7 @@ jobs:
     #    installer-gui isn't one of the default workspace packages
     # 2) avoid slowing down development on changes unrelated to the GUI installer
     needs: files_changed
-    if: needs.files_changed.outputs.installer_gui_changed != '0'
+    if: needs.files_changed.outputs.installer_gui_changed == 'true'
     # we run this on macos simply because no additional OS packages need to be
     # installed
     runs-on: macos-latest
@@ -154,17 +172,20 @@ jobs:
       with:
         components: clippy
     - uses: Swatinem/rust-cache@v2
+      with:
+        # Workaround for https://github.com/Swatinem/rust-cache/issues/341
+        cache-bin: 'false'
     # we don't need to run cargo fmt here because both cargo fmt and cargo
     # fmt --all runs on all workspace packages so this is handled by
     # check_and_test above
     - name: Check
-      run: NO_FIRMWARE_BIN=true cargo check --package installer-gui --verbose
+      run: cargo check --package installer-gui --verbose
     - name: Run clippy
-      run: NO_FIRMWARE_BIN=true cargo clippy --package installer-gui --verbose
+      run: cargo clippy --package installer-gui --verbose
 
   test_daemon_frontend:
     needs: files_changed
-    if: needs.files_changed.outputs.web_changed != '0'
+    if: needs.files_changed.outputs.web_changed == 'true'
     runs-on: ubuntu-latest
     permissions:
       contents: read
@@ -182,7 +203,7 @@ jobs:
 
   test_installer_frontend:
     needs: files_changed
-    if: needs.files_changed.outputs.installer_gui_changed != '0'
+    if: needs.files_changed.outputs.installer_gui_changed == 'true'
     runs-on: ubuntu-latest
     permissions:
       contents: read
@@ -199,7 +220,7 @@ jobs:
 
   windows_installer_check_and_test:
     needs: files_changed
-    if: needs.files_changed.outputs.installer_changed != '0'
+    if: needs.files_changed.outputs.installer_changed == 'true'
     runs-on: windows-latest
     permissions:
       contents: read
@@ -212,15 +233,15 @@ jobs:
         shell: bash
         run: |
           cd installer
-          NO_FIRMWARE_BIN=true cargo check --verbose
+          cargo check --verbose
       - name: cargo test
         shell: bash
         run: |
           cd installer
-          NO_FIRMWARE_BIN=true cargo test --verbose --no-default-features
+          cargo test --verbose --no-default-features
 
   build_rayhunter_check:
-    if: needs.files_changed.outputs.daemon_changed != '0'
+    if: needs.files_changed.outputs.daemon_changed == 'true'
     needs:
       - check_and_test
       - files_changed
@@ -257,6 +278,9 @@ jobs:
         with:
           targets: ${{ matrix.platform.target }}
       - uses: Swatinem/rust-cache@v2
+        with:
+          # Workaround for https://github.com/Swatinem/rust-cache/issues/341
+          cache-bin: 'false'
       - name: Build rayhunter-check
         run: cargo build --bin rayhunter-check --release --target ${{ matrix.platform.target }}
       - uses: actions/upload-artifact@v4
@@ -266,7 +290,7 @@ jobs:
           if-no-files-found: error
 
   build_rootshell:
-    if: needs.files_changed.outputs.rootshell_changed != '0' || needs.files_changed.outputs.installer_changed != '0'
+    if: needs.files_changed.outputs.rootshell_needed == 'true'
     needs:
       - check_and_test
       - files_changed
@@ -289,11 +313,32 @@ jobs:
           path: target/armv7-unknown-linux-musleabihf/firmware/rootshell
           if-no-files-found: error
 
+  build_wpa_supplicant:
+    if: needs.files_changed.outputs.installer_build == 'true'
+    needs:
+      - files_changed
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+      - name: Install cross-compiler
+        run: sudo apt-get update && sudo apt-get install -y gcc-arm-linux-gnueabihf
+      - name: Build wpa_supplicant (armv7)
+        run: CC=arm-linux-gnueabihf-gcc STRIP=arm-linux-gnueabihf-strip HOST=arm-linux-gnueabihf scripts/build-wpa-supplicant.sh
+      - uses: actions/upload-artifact@v4
+        with:
+          name: wpa-supplicant
+          path: |
+            tools/build-wpa-supplicant/out/wpa_supplicant
+            tools/build-wpa-supplicant/out/wpa_cli
+            tools/build-wpa-supplicant/out/iw
+          if-no-files-found: error
+
   build_rayhunter:
-    # build_rust_installer needs this step. so when installer_changed, we need
-    # to build this step too. if we skip this step because only the installer
-    # changed, the build_rust_installer step will be skipped too.
-    if: needs.files_changed.outputs.daemon_changed != '0' || needs.files_changed.outputs.installer_changed != '0'
+    if: needs.files_changed.outputs.daemon_needed == 'true'
     needs:
       - check_and_test
       - files_changed
@@ -305,27 +350,25 @@ jobs:
       - uses: actions/checkout@v4
         with:
           persist-credentials: false
-      - uses: dtolnay/rust-toolchain@stable
-        with:
-          targets: armv7-unknown-linux-musleabihf
-      - uses: Swatinem/rust-cache@v2
-      - name: Install ARM cross-compilation toolchain
-        run: sudo apt-get update && sudo apt-get install -y gcc-arm-linux-gnueabihf
-      - name: Build rayhunter-daemon (armv7)
+      - name: Build frontend
         run: |
           pushd daemon/web
           npm install
           npm run build
           popd
-          # Run with -p so that cargo will select the minimum feature set for this package.
-          #
-          # Otherwise, it will consider the union of all requested features
-          # from all packages in the workspace. For example, if installer
-          # requires tokio with "full" feature, it will be included no matter
-          # what the feature selection in rayhunter-daemon is.
-          #
-          # https://github.com/rust-lang/cargo/issues/4463
-          CC_armv7_unknown_linux_musleabihf=arm-linux-gnueabihf-gcc cargo build-daemon-firmware
+      - name: Build rayhunter-daemon (armv7)
+        # Cross-compile inside messense/rust-musl-cross, which bundles an
+        # arm-linux-musleabihf cross gcc that aws-lc-sys needs.
+        run: |
+          mkdir -p "$HOME/.cargo-musl-cross"
+          docker run --rm \
+            --user "$(id -u):$(id -g)" \
+            -v "$PWD":/work \
+            -v "$HOME/.cargo-musl-cross":/cargo-home \
+            -e CARGO_HOME=/cargo-home \
+            -w /work \
+            messense/rust-musl-cross:armv7-musleabihf \
+            cargo build-daemon-firmware
       - uses: actions/upload-artifact@v4
         with:
           name: rayhunter-daemon
@@ -333,13 +376,14 @@ jobs:
           if-no-files-found: error
 
   build_rust_installer:
-    if: needs.files_changed.outputs.installer_changed != '0'
+    if: needs.files_changed.outputs.installer_changed == 'true'
     permissions:
       contents: read
       packages: write
     needs:
       - build_rayhunter
       - build_rootshell
+      - build_wpa_supplicant
       - files_changed
       - windows_installer_check_and_test
     strategy:
@@ -373,6 +417,9 @@ jobs:
         with:
           targets: ${{ matrix.platform.target }}
       - uses: Swatinem/rust-cache@v2
+        with:
+          # Workaround for https://github.com/Swatinem/rust-cache/issues/341
+          cache-bin: 'false'
       - run: cargo build --package installer --bin installer --release --target ${{ matrix.platform.target }}
       - uses: actions/upload-artifact@v4
         with:
@@ -381,13 +428,14 @@ jobs:
           if-no-files-found: error
 
   build_installer_gui_linux:
-    if: needs.files_changed.outputs.installer_gui_changed != '0'
+    if: needs.files_changed.outputs.installer_gui_changed == 'true'
     permissions:
       contents: read
       packages: write
     needs:
       - build_rayhunter
       - build_rootshell
+      - build_wpa_supplicant
       - files_changed
       - installer_gui_check
       - test_installer_frontend
@@ -437,13 +485,14 @@ jobs:
           if-no-files-found: error
 
   build_installer_gui_macos:
-    if: needs.files_changed.outputs.installer_gui_changed != '0'
+    if: needs.files_changed.outputs.installer_gui_changed == 'true'
     permissions:
       contents: read
       packages: write
     needs:
       - build_rayhunter
       - build_rootshell
+      - build_wpa_supplicant
       - files_changed
       - installer_gui_check
       - test_installer_frontend
@@ -464,6 +513,10 @@ jobs:
         with:
           targets: ${{ matrix.platform.target }}
       - uses: Swatinem/rust-cache@v2
+        with:
+          # Workaround for https://github.com/Swatinem/rust-cache/issues/341
+          # bin caching breaks cargo resolution on macOS 15 runner images
+          cache-bin: 'false'
       - name: Build GUI installer
         shell: bash
         run: |
@@ -480,13 +533,14 @@ jobs:
           if-no-files-found: error
 
   build_installer_gui_windows:
-    if: needs.files_changed.outputs.installer_gui_changed != '0'
+    if: needs.files_changed.outputs.installer_gui_changed == 'true'
     permissions:
       contents: read
       packages: write
     needs:
       - build_rayhunter
       - build_rootshell
+      - build_wpa_supplicant
       - files_changed
       - installer_gui_check
       - test_installer_frontend
@@ -571,3 +625,57 @@ jobs:
             rayhunter-v${{ env.VERSION }}-${{ matrix.platform }}.zip
             rayhunter-v${{ env.VERSION }}-${{ matrix.platform }}.zip.sha256
           if-no-files-found: error
+
+  openapi_build:
+    if: needs.files_changed.outputs.docs_changed == 'true'
+    needs:
+      - files_changed
+    permissions:
+      contents: write
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+      - uses: dtolnay/rust-toolchain@stable
+        with:
+          targets: armv7-unknown-linux-musleabihf
+      - uses: Swatinem/rust-cache@v2
+      - name: Build rayhunter-daemon openapi docs
+        run: |
+          mkdir -p daemon/web/build
+          touch daemon/web/build/{favicon.png,index.html.gz,rayhunter_orca_only.png,rayhunter_text.png}
+          cargo run --bin gen_api --features apidocs -- ./rayhunter-openapi.json
+      - name: Make swagger folder
+        run: |
+          mkdir api-docs
+          mv doc/swagger-ui.html api-docs/index.html
+          mv rayhunter-openapi.json api-docs/
+      - uses: actions/upload-artifact@v4
+        with:
+          name: api-docs
+          path: api-docs
+
+  github_pages_publish:
+    name: Upload new documentation to Github Pages
+    if: ${{ github.ref == 'refs/heads/main' }}
+    permissions:
+      pages: write
+      contents: write
+      id-token: write
+    needs:
+      - mdbook_build
+      - openapi_build
+    runs-on: ubuntu-latest
+    steps:
+      - name: Setup Pages
+        uses: actions/configure-pages@v4
+      - uses: actions/download-artifact@v4
+      - name: Organize pages into directory
+        run: cp -a api-docs book/
+      - name: Upload pages
+        uses: actions/upload-pages-artifact@v3
+        with:
+          path: book
+      - name: Deploy Github Pages
+        uses: actions/deploy-pages@v4

.gitignore

@@ -1,3 +1,4 @@
 /target
 /book
 .DS_Store
+/tools/build-wpa-supplicant

CONTRIBUTING.md

@@ -58,15 +58,25 @@ Otherwise:
   manually test them. Our test coverage isn't great, but as new features are
   added we are trying to prevent it from becoming worse.
 
+- Please keep your contributions to less than approximately 400 lines of code not counting tests, (going slightly over is fine, we aren't dogmatic about it.) This is because we are not able to give quality code review to contributions larger than that and risk introducing bugs into the system. [There was a study showing 400 LOC is the max most humans can handle.](https://smartbear.com/learn/code-review/best-practices-for-peer-code-review/)
+
 If you have any questions [feel free to open a discussion or chat with us on Mattermost.](https://efforg.github.io/rayhunter/support-feedback-community.html)
 
+### Policy regarding AI-generated contributions:
+
+- Please refrain from submissions that you haven't thoroughly understood, reviewed, and tested.
+- Please disclose if your contribution was AI-generated
+- Descriptions and comments should be made by you
+
+You can read our [full policy](https://www.eff.org/about/opportunities/volunteer/coding-with-eff) and some writing on [our motivations](https://www.eff.org/deeplinks/2026/02/effs-policy-llm-assisted-contributions-our-open-source-projects).
+
 ## Making releases
 
 This one is for maintainers of Rayhunter.
 
 1. Make a PR changing the versions in `Cargo.toml` and other files.
    This could be automated better but right now it's manual. You can do this easily with sed:
-   `sed -i "" -E 's/x.x.x/y.y.y/g' */Cargo.toml`
+   `sed -i "" -E 's/x.x.x/y.y.y/g' */Cargo.toml installer-gui/src-tauri/Cargo.toml`
 
 2. Merge PR and make a tag.
 

book.toml

@@ -6,3 +6,4 @@ title = "Rayhunter - An IMSI Catcher Catcher"
 
 [output.html]
 edit-url-template = "https://github.com/efforg/rayhunter/edit/main/{path}"
+additional-css = ["doc/custom.css"]

check/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "rayhunter-check"
-version = "0.9.0"
+version = "0.11.2"
 edition = "2024"
 
 [dependencies]
@@ -10,5 +10,4 @@ log = "0.4.20"
 tokio = { version = "1.44.2", default-features = false, features = ["fs", "signal", "process", "rt-multi-thread"] }
 pcap-file-tokio = "0.1.0"
 clap = { version = "4.5.2", features = ["derive"] }
-simple_logger = "5.0.0"
 walkdir = "2.5.0"

check/src/main.rs

@@ -155,10 +155,10 @@ async fn pcapify(qmdl_path: &PathBuf) {
         .await
         .expect("failed to get container")
     {
-        for msg in container.into_messages().into_iter().flatten() {
+        for msg in container.messages().into_iter().flatten() {
             if let Ok(Some((timestamp, parsed))) = gsmtap_parser::parse(msg) {
                 pcap_writer
-                    .write_gsmtap_message(parsed, timestamp)
+                    .write_gsmtap_message(parsed, timestamp, None)
                     .await
                     .expect("failed to write");
             }
@@ -177,14 +177,7 @@ async fn main() {
     } else {
         log::LevelFilter::Info
     };
-    simple_logger::SimpleLogger::new()
-        .with_colors(true)
-        .without_timestamps()
-        .with_level(level)
-        //Filter out a stupid massive amount of uneccesary warnings from hampi about undecoded extensions
-        .with_module_level("asn1_codecs", log::LevelFilter::Error)
-        .init()
-        .unwrap();
+    rayhunter::init_logging(level);
 
     let harness = Harness::new_with_config(&AnalyzerConfig::default());
     info!("Analyzers:");

daemon/Cargo.toml

@@ -1,24 +1,35 @@
 [package]
 name = "rayhunter-daemon"
-version = "0.9.0"
+version = "0.11.2"
 edition = "2024"
 rust-version = "1.88.0"
 
+[lib]
+name = "rayhunter_daemon"
+path = "src/lib.rs"
+
+[[bin]]
+name = "gen_api"
+path = "src/bin/gen_api.rs"
+required-features = ["apidocs"]
+
 [features]
 default = ["rustcrypto-tls"]
 rustcrypto-tls = ["reqwest/rustls-tls-webpki-roots-no-provider", "dep:rustls-rustcrypto"]
-ring-tls = ["reqwest/rustls-tls-webpki-roots"]
+pq-tls = ["reqwest/rustls-tls-webpki-roots-no-provider", "dep:rustls-post-quantum"]
+apidocs = ["dep:utoipa", "wifi-station/utoipa"]
 
 [dependencies]
 rayhunter = { path = "../lib" }
+wifi-station = "0.10.1"
 toml = "0.8.8"
 serde = { version = "1.0.193", features = ["derive"] }
+serde_repr = "0.1"
 tokio = { version = "1.44.2", default-features = false, features = ["fs", "signal", "process", "rt"] }
 axum = { version = "0.8", default-features = false, features = ["http1", "tokio", "json"] }
 thiserror = "1.0.52"
 libc = "0.2.150"
 log = "0.4.20"
-env_logger = { version = "0.11", default-features = false }
 tokio-util = { version = "0.7.10", features = ["rt", "io", "compat"] }
 futures-macro = "0.3.30"
 include_dir = "0.7.3"
@@ -27,9 +38,16 @@ tokio-stream = { version = "0.1.14", default-features = false, features = ["io-u
 futures = { version = "0.3.30", default-features = false }
 serde_json = "1.0.114"
 image = { version =  "0.25.1", default-features = false, features = ["png", "gif"] }
-tempfile = "3.10.1"
+tempfile = "3.10.2"
 async_zip = { version = "0.0.17", features = ["tokio"] }
 anyhow = "1.0.98"
-reqwest = { version = "0.12.20", default-features = false }
+reqwest = { version = "0.12.20", default-features = false, features = ["stream"] }
 rustls-rustcrypto = { version = "0.0.2-alpha", optional = true }
+rustls-post-quantum = { version = "0.2.4", optional = true }
 async-trait = "0.1.88"
+utoipa = { version = "5.4.0", optional = true }
+url = "2.5.4"
+
+[dev-dependencies]
+reqwest = { version = "0.12.20", default-features = false, features = ["gzip"] }
+tempfile = "3.10.2"

daemon/src/analysis.rs

@@ -18,7 +18,7 @@ use tokio::sync::mpsc::Receiver;
 use tokio::sync::{RwLock, RwLockWriteGuard};
 use tokio_util::task::TaskTracker;
 
-use crate::qmdl_store::RecordingStore;
+use crate::qmdl_store::{FileKind, RecordingStore};
 use crate::server::ServerState;
 
 pub struct AnalysisWriter {
@@ -77,10 +77,15 @@ impl AnalysisWriter {
     }
 }
 
+/// The system status relating to QMDL file analysis
 #[derive(Debug, Serialize, Clone)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
 pub struct AnalysisStatus {
+    /// The vector array of queued files
     queued: Vec<String>,
+    /// The file currently being analyzed
     running: Option<String>,
+    /// The vector array of finished files
     finished: Vec<String>,
 }
 
@@ -140,9 +145,10 @@ async fn perform_analysis(
             .await
             .map_err(|e| format!("{e:?}"))?;
         let qmdl_file = qmdl_store
-            .open_entry_qmdl(entry_index)
+            .open_file(entry_index, FileKind::Qmdl)
             .await
-            .map_err(|e| format!("{e:?}"))?;
+            .map_err(|e| format!("{e:?}"))?
+            .ok_or("QMDL file not found")?;
 
         (analysis_file, qmdl_file)
     };
@@ -215,6 +221,16 @@ pub fn run_analysis_thread(
     });
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/analysis",
+    tag = "Recordings",
+    responses(
+        (status = StatusCode::OK, description = "Success", body = AnalysisStatus)
+    ),
+    summary = "Analysis status",
+    description = "Show analysis status for all QMDL files."
+))]
 pub async fn get_analysis_status(
     State(state): State<Arc<ServerState>>,
 ) -> Result<Json<AnalysisStatus>, (StatusCode, String)> {
@@ -231,6 +247,20 @@ fn queue_qmdl(name: &str, analysis_status: &mut RwLockWriteGuard<AnalysisStatus>
     true
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    post,
+    path = "/api/analysis/{name}",
+    tag = "Recordings",
+    responses(
+        (status = StatusCode::ACCEPTED, description = "Success"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Unable to queue analysis file")
+    ),
+    params(
+        ("name" = String, Path, description = "QMDL file to analyze")
+    ),
+    summary = "Start analysis",
+    description = "Begin analysis of QMDL file {name}."
+))]
 pub async fn start_analysis(
     State(state): State<Arc<ServerState>>,
     Path(qmdl_name): Path<String>,

daemon/src/battery/mod.rs

@@ -1,6 +1,6 @@
 use std::{path::Path, time::Duration};
 
-use log::{error, info};
+use log::{info, warn};
 use rayhunter::Device;
 use serde::Serialize;
 use tokio::select;
@@ -18,9 +18,13 @@ pub mod wingtech;
 
 const LOW_BATTERY_LEVEL: u8 = 10;
 
+/// Device battery information
 #[derive(Clone, Copy, PartialEq, Debug, Serialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
 pub struct BatteryState {
+    /// The current level in percentage of the device battery
     level: u8,
+    /// A boolean indicating whether the battery is currently being charged
     is_plugged_in: bool,
 }
 
@@ -66,11 +70,11 @@ pub fn run_battery_notification_worker(
         // Don't send a notification initially if the device starts at a low battery level.
         let mut triggered = match get_battery_status(&device).await {
             Err(RayhunterError::FunctionNotSupportedForDeviceError) => {
-                info!("Battery level function not supported for device");
-                false
+                info!("Battery status not supported for this device, disabling battery notifications");
+                return;
             }
             Err(e) => {
-                error!("Failed to get battery status: {e}");
+                warn!("Failed to get battery status: {e}");
                 true
             }
             Ok(status) => status.level <= LOW_BATTERY_LEVEL,
@@ -83,8 +87,12 @@ pub fn run_battery_notification_worker(
             }
 
             let status = match get_battery_status(&device).await {
+                Err(RayhunterError::FunctionNotSupportedForDeviceError) => {
+                    info!("Battery status not supported for this device, disabling battery notifications");
+                    break;
+                }
                 Err(e) => {
-                    error!("Failed to get battery status: {e}");
+                    warn!("Failed to get battery status: {e}");
                     continue;
                 }
                 Ok(status) => status,

daemon/src/bin/gen_api.rs

@@ -0,0 +1,12 @@
+use std::{env, fs};
+
+fn main() {
+    let content = rayhunter_daemon::ApiDocs::generate();
+    let mut filename = "openapi.json".to_string();
+    let args: Vec<String> = env::args().collect();
+    if args.len() > 1 {
+        filename = args[1].to_string();
+    }
+
+    fs::write(filename, content).unwrap();
+}

daemon/src/config.rs

@@ -1,25 +1,126 @@
 use log::warn;
 use serde::{Deserialize, Serialize};
+use serde_repr::{Deserialize_repr, Serialize_repr};
 
 use rayhunter::Device;
 use rayhunter::analysis::analyzer::AnalyzerConfig;
 
 use crate::error::RayhunterError;
+
+#[repr(u8)]
+#[derive(Debug, Clone, Copy, PartialEq, Serialize_repr, Deserialize_repr)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
+pub enum GpsMode {
+    Disabled = 0,
+    Fixed = 1,
+    Api = 2,
+}
+
+#[repr(u8)]
+#[derive(Debug, Clone, Copy, PartialEq, Serialize_repr, Deserialize_repr)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
+pub enum UiLevel {
+    Invisible = 0,
+    Subtle = 1,
+    Demo = 2,
+    EffLogo = 3,
+    HighVisibility = 4,
+    TransFlag = 128,
+}
+
+#[repr(u8)]
+#[derive(Debug, Clone, Copy, PartialEq, Serialize_repr, Deserialize_repr)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
+pub enum KeyInputMode {
+    Disabled = 0,
+    DoubleTapPower = 1,
+}
 use crate::notifications::NotificationType;
 
+/// The structure of a valid rayhunter configuration
 #[derive(Debug, Clone, Deserialize, Serialize)]
 #[serde(default)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
 pub struct Config {
+    /// Path to store QMDL files
     pub qmdl_store_path: String,
+    /// Listening port
     pub port: u16,
+    /// Debug mode
     pub debug_mode: bool,
+    /// Internal device name
     pub device: Device,
-    pub ui_level: u8,
+    /// UI level
+    pub ui_level: UiLevel,
+    /// Colorblind mode
     pub colorblind_mode: bool,
-    pub key_input_mode: u8,
+    /// Key input mode
+    pub key_input_mode: KeyInputMode,
+    /// ntfy.sh URL
     pub ntfy_url: Option<String>,
+    /// Vector containing the types of enabled notifications
     pub enabled_notifications: Vec<NotificationType>,
+    /// Whether Rayhunter should periodically check GitHub for new releases
+    pub auto_check_updates: bool,
+    /// Vector containing the list of enabled analyzers
     pub analyzers: AnalyzerConfig,
+    /// Minimum disk space required to start a recording
+    pub min_space_to_start_recording_mb: u64,
+    /// Minimum disk space required to continue a recording
+    pub min_space_to_continue_recording_mb: u64,
+    /// GPS mode
+    pub gps_mode: GpsMode,
+    /// Fixed latitude used when gps_mode=1
+    pub gps_fixed_latitude: Option<f64>,
+    /// Fixed longitude used when gps_mode=1
+    pub gps_fixed_longitude: Option<f64>,
+    /// Wifi client SSID
+    pub wifi_ssid: Option<String>,
+    /// Wifi client password
+    pub wifi_password: Option<String>,
+    /// Wifi security type (wpa_psk or sae)
+    pub wifi_security: Option<wifi_station::SecurityType>,
+    /// Wifi client mode
+    pub wifi_enabled: bool,
+    /// Vector containing wifi client DNS servers
+    pub dns_servers: Option<Vec<String>>,
+    /// WebDAV upload configuration. The upload worker runs whenever `webdav.url` is non-empty.
+    pub webdav: WebdavConfig,
+}
+
+/// Configuration for uploading finished QMDL recordings to a WebDAV server.
+#[derive(Debug, Clone, Deserialize, Serialize)]
+#[serde(default)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
+pub struct WebdavConfig {
+    /// WebDAV server base URL, e.g. "https://example.com/remote.php/files/untitaker/my-subfolder/"
+    pub url: String,
+    /// Optional username for HTTP Basic auth
+    pub username: Option<String>,
+    /// Optional password for HTTP Basic auth
+    pub password: Option<String>,
+    /// Timeout (in seconds) for each upload request
+    pub upload_timeout_secs: u64,
+    /// How often (in seconds) the worker scans for entries to upload
+    pub poll_interval_secs: u64,
+    /// Minimum age (in seconds) an entry must have before it becomes eligible for upload
+    pub min_age_secs: i64,
+    /// Delete the file locally after a successful upload
+    pub delete_on_upload: bool,
+}
+
+impl Default for WebdavConfig {
+    fn default() -> Self {
+        WebdavConfig {
+            url: String::new(),
+            username: None,
+            password: None,
+            upload_timeout_secs: 300,
+            poll_interval_secs: 3600,
+            min_age_secs: 86400,
+            delete_on_upload: false,
+        }
+    }
 }
 
 impl Default for Config {
@@ -29,26 +130,94 @@ impl Default for Config {
             port: 8080,
             debug_mode: false,
             device: Device::Orbic,
-            ui_level: 1,
+            ui_level: UiLevel::Subtle,
             colorblind_mode: false,
-            key_input_mode: 0,
+            key_input_mode: KeyInputMode::Disabled,
             analyzers: AnalyzerConfig::default(),
             ntfy_url: None,
             enabled_notifications: vec![NotificationType::Warning, NotificationType::LowBattery],
+            auto_check_updates: true,
+            min_space_to_start_recording_mb: 1,
+            min_space_to_continue_recording_mb: 1,
+            gps_mode: GpsMode::Disabled,
+            gps_fixed_latitude: None,
+            gps_fixed_longitude: None,
+            wifi_ssid: None,
+            wifi_password: None,
+            wifi_security: None,
+            wifi_enabled: false,
+            dns_servers: None,
+            webdav: WebdavConfig::default(),
         }
     }
 }
 
+impl Config {
+    pub fn wifi_config(&self) -> wifi_station::WifiConfig {
+        let (wpa_bin, hostapd_conf, ctrl_interface) = match self.device {
+            Device::Tmobile | Device::Wingtech => (
+                Some("/usr/sbin/wpa_supplicant".into()),
+                Some("/data/configs/hostapd.conf".into()),
+                None,
+            ),
+            Device::Uz801 => (
+                Some("/system/bin/wpa_supplicant".into()),
+                Some("/data/misc/wifi/hostapd.conf".into()),
+                Some("/data/misc/wifi/sockets".into()),
+            ),
+            _ => (None, None, None),
+        };
+        wifi_station::WifiConfig {
+            wifi_enabled: self.wifi_enabled,
+            dns_servers: self.dns_servers.clone(),
+            wifi_ssid: self.wifi_ssid.clone(),
+            wifi_password: self.wifi_password.clone(),
+            security_type: self.wifi_security,
+            wpa_supplicant_bin: wpa_bin.or_else(|| resolve_bin("wpa_supplicant")),
+            hostapd_conf,
+            ctrl_interface,
+            udhcpc_hook_path: Some("/data/rayhunter/udhcpc-hook.sh".into()),
+            dhcp_lease_path: Some("/data/rayhunter/dhcp_lease".into()),
+            wpa_conf_path: Some("/data/rayhunter/wpa_sta.conf".into()),
+            iw_bin: resolve_bin("iw"),
+            udhcpc_bin: resolve_bin("udhcpc"),
+            crash_log_dir: Some("/data/rayhunter/crash-logs".into()),
+            wakelock_name: Some("rayhunter".into()),
+        }
+    }
+}
+
+fn resolve_bin(name: &str) -> Option<String> {
+    let local = format!("/data/rayhunter/bin/{name}");
+    if std::path::Path::new(&local).exists() {
+        return Some(local);
+    }
+    None
+}
+
 pub async fn parse_config<P>(path: P) -> Result<Config, RayhunterError>
 where
     P: AsRef<std::path::Path>,
 {
-    if let Ok(config_file) = tokio::fs::read_to_string(&path).await {
-        Ok(toml::from_str(&config_file).map_err(RayhunterError::ConfigFileParsingError)?)
+    let mut config = if let Ok(config_file) = tokio::fs::read_to_string(&path).await {
+        toml::from_str(&config_file).map_err(RayhunterError::ConfigFileParsingError)?
     } else {
         warn!("unable to read config file, using default config");
-        Ok(Config::default())
+        Config::default()
+    };
+
+    if let Some((ssid, security)) =
+        wifi_station::read_network_from_wpa_conf("/data/rayhunter/wpa_sta.conf")
+    {
+        config.wifi_ssid = Some(ssid);
+        config.wifi_security = Some(security);
+    } else {
+        config.wifi_ssid = None;
+        config.wifi_security = None;
     }
+    config.wifi_password = None;
+
+    Ok(config)
 }
 
 pub struct Args {

daemon/src/crypto_provider.rs

@@ -0,0 +1,23 @@
+use std::sync::Once;
+
+static INSTALL: Once = Once::new();
+
+/// Install the default rustls `CryptoProvider` for the current process.
+///
+/// This is idempotent so that it's easier to use in tests, but also panics loudly if the
+/// initialization fails.
+pub fn install_default() {
+    // Crypto providers fail if they get initialized multiple times, but we don't want to just
+    // ignore all errors, hence the use of once.
+    INSTALL.call_once(|| {
+        #[cfg(feature = "rustcrypto-tls")]
+        rustls_rustcrypto::provider()
+            .install_default()
+            .expect("failed to install rustcrypto crypto provider");
+
+        #[cfg(feature = "pq-tls")]
+        rustls_post_quantum::provider()
+            .install_default()
+            .expect("failed to install aws-lc-rs post-quantum crypto provider");
+    });
+}

daemon/src/diag.rs

@@ -10,27 +10,38 @@ use axum::http::header::CONTENT_TYPE;
 use axum::response::{IntoResponse, Response};
 use futures::{StreamExt, TryStreamExt, future};
 use log::{debug, error, info, warn};
+use rayhunter::Device;
 use tokio::fs::File;
-use tokio::io::{AsyncBufReadExt, BufReader};
+use tokio::io::{AsyncBufReadExt, AsyncWriteExt, BufReader};
+
+use crate::gps::GpsRecord;
 use tokio::sync::mpsc::{Receiver, Sender};
 use tokio::sync::{RwLock, oneshot};
 use tokio_stream::wrappers::LinesStream;
 use tokio_util::task::TaskTracker;
 
+#[cfg(feature = "apidocs")]
+use rayhunter::analysis::analyzer::ReportMetadata;
 use rayhunter::analysis::analyzer::{AnalysisLineNormalizer, AnalyzerConfig, EventType};
-use rayhunter::diag::{DataType, MessagesContainer};
+use rayhunter::diag::{DataType, Message, MessagesContainer};
 use rayhunter::diag_device::DiagDevice;
 use rayhunter::qmdl::QmdlWriter;
 
 use crate::analysis::{AnalysisCtrlMessage, AnalysisWriter};
+use crate::config::GpsMode;
 use crate::display;
 use crate::notifications::{Notification, NotificationType};
-use crate::qmdl_store::{RecordingStore, RecordingStoreError};
+use crate::qmdl_store::{FileKind, RecordingStore, RecordingStoreError};
 use crate::server::ServerState;
+use crate::stats::DiskStats;
+
+const DISK_CHECK_BYTES_INTERVAL: usize = 256 * 1024;
 
 pub enum DiagDeviceCtrlMessage {
     StopRecording,
-    StartRecording,
+    StartRecording {
+        response_tx: Option<oneshot::Sender<Result<(), RecordingStoreError>>>,
+    },
     DeleteEntry {
         name: String,
         response_tx: oneshot::Sender<Result<(), RecordingStoreError>>,
@@ -38,6 +49,10 @@ pub enum DiagDeviceCtrlMessage {
     DeleteAllEntries {
         response_tx: oneshot::Sender<Result<(), RecordingStoreError>>,
     },
+    GpsUpdate {
+        lat: f64,
+        lon: f64,
+    },
     Exit,
 }
 
@@ -46,8 +61,15 @@ pub struct DiagTask {
     analysis_sender: Sender<AnalysisCtrlMessage>,
     analyzer_config: AnalyzerConfig,
     notification_channel: tokio::sync::mpsc::Sender<Notification>,
+    min_space_to_start_mb: u64,
+    min_space_to_continue_mb: u64,
+    gps_mode: GpsMode,
+    gps_fixed_coords: Option<(f64, f64)>,
     state: DiagState,
     max_type_seen: EventType,
+    bytes_since_space_check: usize,
+    low_space_warned: bool,
+    latest_packet_timestamp: Option<i64>,
 }
 
 enum DiagState {
@@ -58,39 +80,123 @@ enum DiagState {
     Stopped,
 }
 
+enum DiskSpaceCheck {
+    Ok(u64),
+    Warning(u64),
+    Critical(u64),
+    Failed,
+}
+
+fn check_disk_space(path: &std::path::Path, warning_mb: u64, critical_mb: u64) -> DiskSpaceCheck {
+    match DiskStats::new(path.to_str().unwrap()) {
+        Ok(stats) => {
+            let available_mb = stats.available_bytes.unwrap_or(0) / 1024 / 1024;
+            if available_mb < critical_mb {
+                DiskSpaceCheck::Critical(available_mb)
+            } else if available_mb < warning_mb {
+                DiskSpaceCheck::Warning(available_mb)
+            } else {
+                DiskSpaceCheck::Ok(available_mb)
+            }
+        }
+        Err(e) => {
+            warn!("Failed to check disk space: {e}");
+            DiskSpaceCheck::Failed
+        }
+    }
+}
+
 impl DiagTask {
+    #[allow(clippy::too_many_arguments)]
     fn new(
         ui_update_sender: Sender<display::DisplayState>,
         analysis_sender: Sender<AnalysisCtrlMessage>,
         analyzer_config: AnalyzerConfig,
         notification_channel: tokio::sync::mpsc::Sender<Notification>,
+        min_space_to_start_mb: u64,
+        min_space_to_continue_mb: u64,
+        gps_mode: GpsMode,
+        gps_fixed_coords: Option<(f64, f64)>,
     ) -> Self {
         Self {
             ui_update_sender,
             analysis_sender,
             analyzer_config,
             notification_channel,
+            min_space_to_start_mb,
+            min_space_to_continue_mb,
+            gps_mode,
+            gps_fixed_coords,
             state: DiagState::Stopped,
             max_type_seen: EventType::Informational,
+            bytes_since_space_check: 0,
+            low_space_warned: false,
+            latest_packet_timestamp: None,
         }
     }
 
-    /// Start recording
-    async fn start(&mut self, qmdl_store: &mut RecordingStore) {
-        let (qmdl_file, analysis_file) = qmdl_store
-            .new_entry()
-            .await
-            .expect("failed creating QMDL file entry");
+    /// Start recording, returning an error if disk space is too low.
+    async fn start(&mut self, qmdl_store: &mut RecordingStore) -> Result<(), RecordingStoreError> {
+        self.max_type_seen = EventType::Informational;
+        self.bytes_since_space_check = 0;
+        self.low_space_warned = false;
+
+        match check_disk_space(
+            &qmdl_store.path,
+            self.min_space_to_start_mb,
+            self.min_space_to_continue_mb,
+        ) {
+            DiskSpaceCheck::Critical(mb) | DiskSpaceCheck::Warning(mb) => {
+                return Err(RecordingStoreError::InsufficientDiskSpace(
+                    mb,
+                    self.min_space_to_start_mb,
+                ));
+            }
+            DiskSpaceCheck::Ok(mb) => {
+                info!("Starting recording with {}MB disk space available", mb);
+            }
+            DiskSpaceCheck::Failed => {}
+        }
+
+        let (qmdl_file, analysis_file) = qmdl_store.new_entry(self.gps_mode).await?;
+
+        // For fixed-mode sessions, write the configured coordinates to the storage
+        // immediately so the per-session GPS is stored durably and isn't affected
+        // by future config changes or GPS API calls.
+        if self.gps_mode == GpsMode::Fixed
+            && let Some((lat, lon)) = self.gps_fixed_coords
+            && let Some((entry_idx, _)) = qmdl_store.get_current_entry()
+        {
+            let mut gps_file = qmdl_store
+                .open_entry_gps_for_append(entry_idx)
+                .await?
+                .ok_or(RecordingStoreError::GpsStorageNotFound)?;
+
+            let record = GpsRecord {
+                latest_packet_timestamp: None,
+                system_time: rayhunter::clock::get_adjusted_now().timestamp(),
+                lat,
+                lon,
+            };
+            let mut json = serde_json::to_vec(&record)?;
+            json.push(b'\n');
+            gps_file
+                .write_all(&json)
+                .await
+                .map_err(RecordingStoreError::WriteFileError)?;
+        }
+
         self.stop_current_recording().await;
         let qmdl_writer = QmdlWriter::new(qmdl_file);
         let analysis_writer = AnalysisWriter::new(analysis_file, &self.analyzer_config)
             .await
-            .map(Box::new)
-            .expect("failed to write to analysis file");
+            .map_err(RecordingStoreError::WriteFileError)?;
+
         self.state = DiagState::Recording {
             qmdl_writer,
-            analysis_writer,
+            analysis_writer: Box::new(analysis_writer),
         };
+
         if let Err(e) = self
             .ui_update_sender
             .send(display::DisplayState::Recording)
@@ -98,11 +204,17 @@ impl DiagTask {
         {
             warn!("couldn't send ui update message: {e}");
         }
+        Ok(())
     }
 
-    /// Stop recording
-    async fn stop(&mut self, qmdl_store: &mut RecordingStore) {
+    /// Stop recording, optionally annotating the entry with a reason.
+    async fn stop(&mut self, qmdl_store: &mut RecordingStore, reason: Option<String>) {
         self.stop_current_recording().await;
+        if let Some(reason) = reason
+            && let Err(e) = qmdl_store.set_current_stop_reason(reason).await
+        {
+            warn!("couldn't set stop reason: {e}");
+        }
         if let Some((_, entry)) = qmdl_store.get_current_entry()
             && let Err(e) = self
                 .analysis_sender
@@ -131,7 +243,7 @@ impl DiagTask {
         name: &str,
     ) -> Result<(), RecordingStoreError> {
         if qmdl_store.is_current_entry(name) {
-            self.stop(qmdl_store).await;
+            self.stop(qmdl_store, None).await;
         }
         let res = qmdl_store.delete_entry(name).await;
         if let Err(e) = res.as_ref() {
@@ -144,7 +256,7 @@ impl DiagTask {
         &mut self,
         qmdl_store: &mut RecordingStore,
     ) -> Result<(), RecordingStoreError> {
-        self.stop(qmdl_store).await;
+        self.stop(qmdl_store, None).await;
         let res = qmdl_store.delete_all_entries().await;
         if let Err(e) = res.as_ref() {
             error!("Error deleting QMDL entries {e}");
@@ -152,6 +264,38 @@ impl DiagTask {
         res
     }
 
+    async fn handle_gps_update(&mut self, qmdl_store: &RecordingStore, lat: f64, lon: f64) {
+        let Some((entry_idx, _)) = qmdl_store.get_current_entry() else {
+            info!("GPS update received but no recording active, not writing to storage");
+            return;
+        };
+        let mut file = match qmdl_store.open_entry_gps_for_append(entry_idx).await {
+            Ok(Some(f)) => f,
+            Ok(None) => {
+                error!("GPS storage not found, cannot write GPS record");
+                return;
+            }
+            Err(e) => {
+                error!("failed to open GPS storage: {e}");
+                return;
+            }
+        };
+        let record = GpsRecord {
+            latest_packet_timestamp: self.latest_packet_timestamp,
+            system_time: rayhunter::clock::get_adjusted_now().timestamp(),
+            lat,
+            lon,
+        };
+        let Ok(mut json) = serde_json::to_vec(&record) else {
+            error!("failed to serialize GPS record");
+            return;
+        };
+        json.push(b'\n');
+        if let Err(e) = file.write_all(&json).await {
+            error!("failed to write GPS record to storage: {e}");
+        }
+    }
+
     async fn stop_current_recording(&mut self) {
         let mut state = DiagState::Stopped;
         std::mem::swap(&mut self.state, &mut state);
@@ -182,10 +326,54 @@ impl DiagTask {
             analysis_writer,
         } = &mut self.state
         {
-            qmdl_writer
-                .write_container(&container)
-                .await
-                .expect("failed to write to QMDL writer");
+            if self.bytes_since_space_check >= DISK_CHECK_BYTES_INTERVAL {
+                self.bytes_since_space_check = 0;
+                match check_disk_space(
+                    &qmdl_store.path,
+                    self.min_space_to_start_mb,
+                    self.min_space_to_continue_mb,
+                ) {
+                    DiskSpaceCheck::Critical(mb) => {
+                        let reason = format!(
+                            "Disk space critically low ({}MB free), recording stopped automatically",
+                            mb
+                        );
+                        error!("{reason}");
+
+                        self.notification_channel
+                            .send(Notification::new(
+                                NotificationType::Warning,
+                                reason.clone(),
+                                None,
+                            ))
+                            .await
+                            .ok();
+
+                        self.stop(qmdl_store, Some(reason)).await;
+                        return;
+                    }
+                    DiskSpaceCheck::Warning(mb) if !self.low_space_warned => {
+                        self.low_space_warned = true;
+                        warn!("Disk space low: {}MB remaining", mb);
+                        self.notification_channel
+                            .send(Notification::new(
+                                NotificationType::Warning,
+                                format!("Disk space low: {}MB free", mb),
+                                Some(Duration::from_secs(30)),
+                            ))
+                            .await
+                            .ok();
+                    }
+                    _ => {}
+                }
+            }
+
+            if let Err(e) = qmdl_writer.write_container(&container).await {
+                let reason = format!("failed to write to QMDL (disk full?): {e}");
+                error!("{reason}");
+                self.stop(qmdl_store, Some(reason)).await;
+                return;
+            }
             debug!(
                 "total QMDL bytes written: {}, updating manifest...",
                 qmdl_writer.total_written
@@ -193,15 +381,39 @@ impl DiagTask {
             let index = qmdl_store
                 .current_entry
                 .expect("DiagDevice had qmdl_writer, but QmdlStore didn't have current entry???");
-            qmdl_store
+            if let Err(e) = qmdl_store
                 .update_entry_qmdl_size(index, qmdl_writer.total_written)
                 .await
-                .expect("failed to update qmdl file size");
+            {
+                let reason = format!("failed to update manifest (disk full?): {e}");
+                error!("{reason}");
+                self.stop(qmdl_store, Some(reason)).await;
+                return;
+            }
             debug!("done!");
-            let max_type = analysis_writer
-                .analyze(container)
-                .await
-                .expect("failed to analyze container");
+
+            // Extract the latest packet timestamp from this container
+            if let Some(ts) = container
+                .messages()
+                .into_iter()
+                .filter_map(|r| match r {
+                    Ok(Message::Log { timestamp, .. }) => Some(timestamp.to_datetime().timestamp()),
+                    _ => None,
+                })
+                .max()
+            {
+                self.latest_packet_timestamp = Some(ts);
+            }
+
+            let container_bytes: usize = container.messages.iter().map(|m| m.data.len()).sum();
+            self.bytes_since_space_check += container_bytes;
+            let max_type = match analysis_writer.analyze(container).await {
+                Ok(t) => t,
+                Err(e) => {
+                    warn!("failed to analyze container: {e}");
+                    EventType::Informational
+                }
+            };
 
             if max_type > EventType::Informational {
                 info!("a heuristic triggered on this run!");
@@ -235,7 +447,7 @@ impl DiagTask {
 #[allow(clippy::too_many_arguments)]
 pub fn run_diag_read_thread(
     task_tracker: &TaskTracker,
-    mut dev: DiagDevice,
+    device: Device,
     mut qmdl_file_rx: Receiver<DiagDeviceCtrlMessage>,
     qmdl_file_tx: Sender<DiagDeviceCtrlMessage>,
     ui_update_sender: Sender<display::DisplayState>,
@@ -243,25 +455,47 @@ pub fn run_diag_read_thread(
     analysis_sender: Sender<AnalysisCtrlMessage>,
     analyzer_config: AnalyzerConfig,
     notification_channel: tokio::sync::mpsc::Sender<Notification>,
+    min_space_to_start_mb: u64,
+    min_space_to_continue_mb: u64,
+    gps_mode: GpsMode,
+    gps_fixed_coords: Option<(f64, f64)>,
 ) {
     task_tracker.spawn(async move {
+        info!("Using configuration for device: {0:?}", device);
+        let mut dev = DiagDevice::new(&device)
+            .await?;
+        dev.config_logs()
+            .await?;
+
         let mut diag_stream = pin!(dev.as_stream().into_stream());
-        let mut diag_task = DiagTask::new(ui_update_sender, analysis_sender, analyzer_config, notification_channel);
+        let mut diag_task = DiagTask::new(
+            ui_update_sender,
+            analysis_sender,
+            analyzer_config,
+            notification_channel,
+            min_space_to_start_mb,
+            min_space_to_continue_mb,
+            gps_mode,
+            gps_fixed_coords,
+        );
         qmdl_file_tx
-            .send(DiagDeviceCtrlMessage::StartRecording)
+            .send(DiagDeviceCtrlMessage::StartRecording { response_tx: None })
             .await
             .unwrap();
         loop {
             tokio::select! {
                 msg = qmdl_file_rx.recv() => {
                     match msg {
-                        Some(DiagDeviceCtrlMessage::StartRecording) => {
+                        Some(DiagDeviceCtrlMessage::StartRecording { response_tx }) => {
                             let mut qmdl_store = qmdl_store_lock.write().await;
-                            diag_task.start(qmdl_store.deref_mut()).await;
+                            let result = diag_task.start(qmdl_store.deref_mut()).await;
+                            if let Some(tx) = response_tx {
+                                tx.send(result).ok();
+                            }
                         },
                         Some(DiagDeviceCtrlMessage::StopRecording) => {
                             let mut qmdl_store = qmdl_store_lock.write().await;
-                            diag_task.stop(qmdl_store.deref_mut()).await;
+                            diag_task.stop(qmdl_store.deref_mut(), None).await;
                         },
                         // None means all the Senders have been dropped, so it's
                         // time to go
@@ -284,6 +518,10 @@ pub fn run_diag_read_thread(
                                 error!("Failed to send delete all entries respons, receiver dropped");
                             }
                         },
+                        Some(DiagDeviceCtrlMessage::GpsUpdate { lat, lon }) => {
+                            let qmdl_store = qmdl_store_lock.read().await;
+                            diag_task.handle_gps_update(&qmdl_store, lat, lon).await;
+                        },
                     }
                 }
                 maybe_container = diag_stream.next() => {
@@ -304,6 +542,18 @@ pub fn run_diag_read_thread(
 }
 
 /// Start recording API for web thread
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    post,
+    path = "/api/start-recording",
+    tag = "Recordings",
+    responses(
+        (status = StatusCode::ACCEPTED, description = "Success"),
+        (status = StatusCode::FORBIDDEN, description = "System is in debug mode"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Recording action unsuccessful")
+    ),
+    summary = "Start recording",
+    description = "Begin a new data capture."
+))]
 pub async fn start_recording(
     State(state): State<Arc<ServerState>>,
 ) -> Result<(StatusCode, String), (StatusCode, String)> {
@@ -311,9 +561,12 @@ pub async fn start_recording(
         return Err((StatusCode::FORBIDDEN, "server is in debug mode".to_string()));
     }
 
+    let (response_tx, response_rx) = oneshot::channel();
     state
         .diag_device_ctrl_sender
-        .send(DiagDeviceCtrlMessage::StartRecording)
+        .send(DiagDeviceCtrlMessage::StartRecording {
+            response_tx: Some(response_tx),
+        })
         .await
         .map_err(|e| {
             (
@@ -322,10 +575,29 @@ pub async fn start_recording(
             )
         })?;
 
-    Ok((StatusCode::ACCEPTED, "ok".to_string()))
+    match response_rx.await {
+        Ok(Ok(())) => Ok((StatusCode::ACCEPTED, "ok".to_string())),
+        Ok(Err(reason)) => Err((StatusCode::INSUFFICIENT_STORAGE, reason.to_string())),
+        Err(e) => Err((
+            StatusCode::INTERNAL_SERVER_ERROR,
+            format!("failed to receive start recording response: {e}"),
+        )),
+    }
 }
 
 /// Stop recording API for web thread
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    post,
+    path = "/api/stop-recording",
+    tag = "Recordings",
+    responses(
+        (status = StatusCode::ACCEPTED, description = "Success"),
+        (status = StatusCode::FORBIDDEN, description = "System is in debug mode"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Recording action unsuccessful")
+    ),
+    summary = "Stop recording",
+    description = "Stop current data capture."
+))]
 pub async fn stop_recording(
     State(state): State<Arc<ServerState>>,
 ) -> Result<(StatusCode, String), (StatusCode, String)> {
@@ -345,6 +617,22 @@ pub async fn stop_recording(
     Ok((StatusCode::ACCEPTED, "ok".to_string()))
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    post,
+    path = "/api/delete-recording/{name}",
+    tag = "Recordings",
+    responses(
+        (status = StatusCode::ACCEPTED, description = "Success"),
+        (status = StatusCode::FORBIDDEN, description = "System is in debug mode"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Delete action unsuccessful"),
+        (status = StatusCode::BAD_REQUEST, description = "Bad recording name or no such recording")
+    ),
+    params(
+        ("name" = String, Path, description = "QMDL file to delete")
+    ),
+    summary = "Delete recording",
+    description = "Remove data capture file named {name}."
+))]
 pub async fn delete_recording(
     State(state): State<Arc<ServerState>>,
     Path(qmdl_name): Path<String>,
@@ -384,6 +672,18 @@ pub async fn delete_recording(
     }
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    post,
+    path = "/api/delete-all-recordings",
+    tag = "Recordings",
+    responses(
+        (status = StatusCode::ACCEPTED, description = "Success"),
+        (status = StatusCode::FORBIDDEN, description = "System is in debug mode"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Delete action unsuccessful")
+    ),
+    summary = "Delete all recordings",
+    description = "Remove all saved data capture files."
+))]
 pub async fn delete_all_recordings(
     State(state): State<Arc<ServerState>>,
 ) -> Result<(StatusCode, String), (StatusCode, String)> {
@@ -415,6 +715,21 @@ pub async fn delete_all_recordings(
     }
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/analysis-report/{name}",
+    tag = "Recordings",
+    responses(
+        (status = StatusCode::OK, description = "Success", body = ReportMetadata, content_type = "application/x-ndjson"),
+        (status = StatusCode::SERVICE_UNAVAILABLE, description = "No QMDL files available; start a new recording."),
+        (status = StatusCode::NOT_FOUND, description = "File {name} not found")
+    ),
+    params(
+        ("name" = String, Path, description = "QMDL file to analyze")
+    ),
+    summary = "Analysis report",
+    description = "Download processed analysis report for QMDL file {name}, as well as the types (and versions) of analyzers used."
+))]
 pub async fn get_analysis_report(
     State(state): State<Arc<ServerState>>,
     Path(qmdl_name): Path<String>,
@@ -432,9 +747,10 @@ pub async fn get_analysis_report(
         ))?
     };
     let analysis_file = qmdl_store
-        .open_entry_analysis(entry_index)
+        .open_file(entry_index, FileKind::Analysis)
         .await
-        .map_err(|e| (StatusCode::INTERNAL_SERVER_ERROR, format!("{e:?}")))?;
+        .map_err(|e| (StatusCode::INTERNAL_SERVER_ERROR, format!("{e:?}")))?
+        .ok_or((StatusCode::NOT_FOUND, "Analysis file not found".to_string()))?;
 
     // Read and normalize the NDJSON file
     let reader = BufReader::new(analysis_file);

daemon/src/display/generic_framebuffer.rs

@@ -3,7 +3,7 @@ use image::{AnimationDecoder, DynamicImage, codecs::gif::GifDecoder, imageops::F
 use std::io::Cursor;
 use std::time::Duration;
 
-use crate::config;
+use crate::config::{self, UiLevel};
 use crate::display::DisplayState;
 use rayhunter::analysis::analyzer::EventType;
 
@@ -102,7 +102,7 @@ pub trait GenericFramebuffer: Send + 'static {
             resized_img = img;
         }
         let img_rgba8 = resized_img.as_rgba8().unwrap();
-        let mut buf = Vec::new();
+        let mut buf = Vec::with_capacity((height * width).try_into().unwrap());
         for y in 0..height {
             for x in 0..width {
                 let px = img_rgba8.get_pixel(x, y);
@@ -145,7 +145,7 @@ pub trait GenericFramebuffer: Send + 'static {
 
     async fn draw_patterned_line(&mut self, color: Color, height: u32, pattern: LinePattern) {
         let width = self.dimensions().width;
-        let mut buffer = Vec::new();
+        let mut buffer = Vec::with_capacity((height * width).try_into().unwrap());
 
         for _row in 0..height {
             for col in 0..width {
@@ -176,7 +176,7 @@ pub fn update_ui(
 ) {
     static IMAGE_DIR: Dir<'_> = include_dir!("$CARGO_MANIFEST_DIR/images/");
     let display_level = config.ui_level;
-    if display_level == 0 {
+    if display_level == UiLevel::Invisible {
         info!("Invisible mode, not spawning UI.");
         return;
     }
@@ -187,14 +187,14 @@ pub fn update_ui(
     task_tracker.spawn(async move {
         // this feels wrong, is there a more rusty way to do this?
         let mut img: Option<&[u8]> = None;
-        if display_level == 2 {
+        if display_level == UiLevel::Demo {
             img = Some(
                 IMAGE_DIR
                     .get_file("orca.gif")
                     .expect("failed to read orca.gif")
                     .contents(),
             );
-        } else if display_level == 3 {
+        } else if display_level == UiLevel::EffLogo {
             img = Some(
                 IMAGE_DIR
                     .get_file("eff.png")
@@ -215,22 +215,26 @@ pub fn update_ui(
                 Err(e) => error!("error receiving framebuffer update message: {e}"),
             }
 
+            let mut status_bar_height = 2;
             match display_level {
-                2 => fb.draw_gif(img.unwrap()).await,
-                3 => fb.draw_img(img.unwrap()).await,
-                128 => {
+                UiLevel::Demo => fb.draw_gif(img.unwrap()).await,
+                UiLevel::EffLogo => fb.draw_img(img.unwrap()).await,
+                UiLevel::HighVisibility => {
+                    status_bar_height = fb.dimensions().height;
+                }
+                UiLevel::TransFlag => {
                     fb.draw_line(Color::Cyan, 128).await;
                     fb.draw_line(Color::Pink, 102).await;
                     fb.draw_line(Color::White, 76).await;
                     fb.draw_line(Color::Pink, 50).await;
                     fb.draw_line(Color::Cyan, 25).await;
                 }
-                // this branch id for ui_level 1, which is also the default if an
-                // unknown value is used
+                // UiLevel::Subtle (1) and anything else: just the status bar line
                 _ => {}
             };
             let (color, pattern) = display_style;
-            fb.draw_patterned_line(color, 2, pattern).await;
+            fb.draw_patterned_line(color, status_bar_height, pattern)
+                .await;
             tokio::time::sleep(Duration::from_millis(REFRESH_RATE)).await;
         }
     });

daemon/src/display/mod.rs

@@ -12,7 +12,9 @@ pub mod tplink_onebit;
 pub mod uz801;
 pub mod wingtech;
 
+/// A list of available display states
 #[derive(Clone, Copy, PartialEq, Serialize, Deserialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
 pub enum DisplayState {
     /// We're recording but no warning has been found yet.
     Recording,

daemon/src/display/orbic.rs

@@ -23,7 +23,7 @@ impl GenericFramebuffer for Framebuffer {
     }
 
     async fn write_buffer(&mut self, buffer: Vec<(u8, u8, u8)>) {
-        let mut raw_buffer = Vec::new();
+        let mut raw_buffer = Vec::with_capacity(buffer.len() * 2);
         for (r, g, b) in buffer {
             let mut rgb565: u16 = (r as u16 & 0b11111000) << 8;
             rgb565 |= (g as u16 & 0b11111100) << 3;

daemon/src/display/tmobile.rs

@@ -9,7 +9,7 @@ use tokio_util::task::TaskTracker;
 
 use std::time::Duration;
 
-use crate::config;
+use crate::config::{self, UiLevel};
 use crate::display::DisplayState;
 
 macro_rules! led {
@@ -31,7 +31,7 @@ pub fn update_ui(
     mut ui_update_rx: mpsc::Receiver<DisplayState>,
 ) {
     let mut invisible: bool = false;
-    if config.ui_level == 0 {
+    if config.ui_level == UiLevel::Invisible {
         info!("Invisible mode, not spawning UI.");
         invisible = true;
     }

daemon/src/display/tplink.rs

@@ -3,7 +3,7 @@ use tokio::sync::mpsc::Receiver;
 use tokio_util::sync::CancellationToken;
 use tokio_util::task::TaskTracker;
 
-use crate::config;
+use crate::config::{self, UiLevel};
 use crate::display::{DisplayState, tplink_framebuffer, tplink_onebit};
 
 use std::fs;
@@ -15,7 +15,7 @@ pub fn update_ui(
     ui_update_rx: Receiver<DisplayState>,
 ) {
     let display_level = config.ui_level;
-    if display_level == 0 {
+    if display_level == UiLevel::Invisible {
         info!("Invisible mode, not spawning UI.");
     }
 

daemon/src/display/tplink_framebuffer.rs

@@ -50,7 +50,7 @@ impl GenericFramebuffer for Framebuffer {
             rop: 0,
         };
 
-        let mut raw_buffer = Vec::new();
+        let mut raw_buffer = Vec::with_capacity(buffer.len() * 2);
         for (r, g, b) in buffer {
             let mut rgb565: u16 = (r as u16 & 0b11111000) << 8;
             rgb565 |= (g as u16 & 0b11111100) << 3;

daemon/src/display/tplink_onebit.rs

@@ -1,7 +1,7 @@
 /// Display module for the TP-Link M7350 oled one-bit display.
 ///
 /// https://github.com/m0veax/tplink_m7350/tree/main/oled
-use crate::config;
+use crate::config::{self, UiLevel};
 use crate::display::DisplayState;
 
 use log::{error, info};
@@ -115,7 +115,7 @@ pub fn update_ui(
     mut ui_update_rx: Receiver<DisplayState>,
 ) {
     let display_level = config.ui_level;
-    if display_level == 0 {
+    if display_level == UiLevel::Invisible {
         info!("Invisible mode, not spawning UI.");
     }
 
@@ -140,7 +140,7 @@ pub fn update_ui(
 
             // we write the status every second because it may have been overwritten through menu
             // navigation.
-            if display_level != 0
+            if display_level != UiLevel::Invisible
                 && let Err(e) = tokio::fs::write(OLED_PATH, pixels).await
             {
                 error!("failed to write to display: {e}");

daemon/src/display/uz801.rs

@@ -9,7 +9,7 @@ use tokio_util::task::TaskTracker;
 
 use std::time::Duration;
 
-use crate::config;
+use crate::config::{self, UiLevel};
 use crate::display::DisplayState;
 
 macro_rules! led {
@@ -31,7 +31,7 @@ pub fn update_ui(
     mut ui_update_rx: mpsc::Receiver<DisplayState>,
 ) {
     let mut invisible: bool = false;
-    if config.ui_level == 0 {
+    if config.ui_level == UiLevel::Invisible {
         info!("Invisible mode, not spawning UI.");
         invisible = true;
     }

daemon/src/display/wingtech.rs

@@ -28,7 +28,7 @@ impl GenericFramebuffer for Framebuffer {
     }
 
     async fn write_buffer(&mut self, buffer: Vec<(u8, u8, u8)>) {
-        let mut raw_buffer = Vec::new();
+        let mut raw_buffer = Vec::with_capacity(buffer.len() * 2);
         for (r, g, b) in buffer {
             let mut rgb565: u16 = (r as u16 & 0b11111000) << 8;
             rgb565 |= (g as u16 & 0b11111100) << 3;

daemon/src/error.rs

@@ -1,4 +1,3 @@
-use rayhunter::diag_device::DiagDeviceError;
 use thiserror::Error;
 
 use crate::qmdl_store::RecordingStoreError;
@@ -7,8 +6,6 @@ use crate::qmdl_store::RecordingStoreError;
 pub enum RayhunterError {
     #[error("Config file parsing error: {0}")]
     ConfigFileParsingError(#[from] toml::de::Error),
-    #[error("Diag intialization error: {0}")]
-    DiagInitError(DiagDeviceError),
     #[error("Tokio error: {0}")]
     TokioError(#[from] tokio::io::Error),
     #[error("QmdlStore error: {0}")]

daemon/src/gps.rs

@@ -0,0 +1,151 @@
+use axum::Json;
+use axum::extract::State;
+use axum::http::StatusCode;
+use log::{error, warn};
+use serde::{Deserialize, Deserializer, Serialize};
+use std::sync::Arc;
+use tokio::io::{AsyncBufReadExt, BufReader};
+
+use crate::config::GpsMode;
+use crate::diag::DiagDeviceCtrlMessage;
+use crate::server::ServerState;
+
+fn deserialize_latitude<'de, D>(deserializer: D) -> Result<f64, D::Error>
+where
+    D: Deserializer<'de>,
+{
+    use serde::de;
+    let v = f64::deserialize(deserializer)?;
+    if !(-90.0..=90.0).contains(&v) {
+        return Err(de::Error::custom(format!(
+            "latitude {v} out of range [-90, 90]"
+        )));
+    }
+    Ok(v)
+}
+
+fn deserialize_longitude<'de, D>(deserializer: D) -> Result<f64, D::Error>
+where
+    D: Deserializer<'de>,
+{
+    use serde::de;
+    let v = f64::deserialize(deserializer)?;
+    if !(-180.0..=180.0).contains(&v) {
+        return Err(de::Error::custom(format!(
+            "longitude {v} out of range [-180, 180]"
+        )));
+    }
+    Ok(v)
+}
+
+#[derive(Clone, Debug, Serialize, Deserialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
+pub struct GpsData {
+    #[serde(deserialize_with = "deserialize_latitude")]
+    pub latitude: f64,
+    #[serde(deserialize_with = "deserialize_longitude")]
+    pub longitude: f64,
+}
+
+#[derive(Serialize, Deserialize)]
+pub struct GpsRecord {
+    /// Packet timestamp (modem clock) for correlation with captured packets.
+    /// None if no packets have been received yet.
+    pub latest_packet_timestamp: Option<i64>,
+    /// Drift-corrected system time when this GPS fix was received
+    pub system_time: i64,
+    pub lat: f64,
+    pub lon: f64,
+}
+
+/// Reads all GPS records from a storage NDJSON file, logging and skipping malformed lines.
+pub async fn load_gps_records(file: tokio::fs::File) -> Vec<GpsRecord> {
+    let reader = BufReader::new(file);
+    let mut lines = reader.lines();
+    let mut records = Vec::new();
+    loop {
+        match lines.next_line().await {
+            Ok(Some(line)) => match serde_json::from_str::<GpsRecord>(&line) {
+                Ok(record) => records.push(record),
+                Err(e) => warn!("skipping malformed GPS storage line: {e}"),
+            },
+            Ok(None) => break,
+            Err(e) => {
+                error!("error reading GPS storage file: {e}");
+                break;
+            }
+        }
+    }
+    records.sort_by_key(|r| r.latest_packet_timestamp.unwrap_or(i64::MIN));
+    records
+}
+
+/// Submit GPS coordinates
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    post,
+    path = "/api/gps",
+    tag = "Configuration",
+    request_body = GpsData,
+    responses(
+        (status = StatusCode::OK, description = "GPS data accepted"),
+        (status = StatusCode::FORBIDDEN, description = "GPS API endpoint is disabled"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Failed to send GPS update")
+    ),
+    summary = "Submit GPS coordinates",
+    description = "Submit GPS coordinates from an external source (e.g. a phone app). Requires gps_mode to be set to 'Api' in configuration. latitude is in decimal degrees from -90 to 90, longitude is in decimal degrees from -180 to 180. The timestamp is derived from the most recent packet's modem timestamp."
+))]
+pub async fn post_gps(
+    State(state): State<Arc<ServerState>>,
+    Json(gps_data): Json<GpsData>,
+) -> Result<StatusCode, (StatusCode, String)> {
+    if state.config.gps_mode != GpsMode::Api {
+        return Err((
+            StatusCode::FORBIDDEN,
+            "GPS API endpoint is disabled. Set gps_mode to API endpoint in configuration."
+                .to_string(),
+        ));
+    }
+
+    // Update in-memory state for GET /api/gps
+    let mut gps = state.gps_state.write().await;
+    *gps = Some(gps_data.clone());
+    drop(gps);
+
+    // Send to DiagTask to write to storage with packet timestamp
+    state
+        .diag_device_ctrl_sender
+        .send(DiagDeviceCtrlMessage::GpsUpdate {
+            lat: gps_data.latitude,
+            lon: gps_data.longitude,
+        })
+        .await
+        .map_err(|e| {
+            error!("failed to send GPS update: {e}");
+            (
+                StatusCode::INTERNAL_SERVER_ERROR,
+                format!("failed to send GPS update: {e}"),
+            )
+        })?;
+
+    Ok(StatusCode::OK)
+}
+
+/// Get the current GPS coordinates
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/gps",
+    tag = "Configuration",
+    responses(
+        (status = StatusCode::OK, description = "Current GPS data", body = GpsData),
+        (status = StatusCode::NOT_FOUND, description = "No GPS data available")
+    ),
+    summary = "Get current GPS coordinates",
+    description = "Returns the most recently submitted GPS coordinates. Returns 404 if no coordinates have been submitted yet this session."
+))]
+pub async fn get_gps(State(state): State<Arc<ServerState>>) -> Result<Json<GpsData>, StatusCode> {
+    let gps = state.gps_state.read().await;
+    match gps.as_ref() {
+        Some(data) => Ok(Json(data.clone())),
+        None => Err(StatusCode::NOT_FOUND),
+    }
+}

daemon/src/key_input.rs

@@ -6,7 +6,7 @@ use tokio::sync::mpsc::Sender;
 use tokio_util::sync::CancellationToken;
 use tokio_util::task::TaskTracker;
 
-use crate::config;
+use crate::config::{self, KeyInputMode};
 use crate::diag::DiagDeviceCtrlMessage;
 
 #[derive(Debug)]
@@ -23,7 +23,7 @@ pub fn run_key_input_thread(
     diag_tx: Sender<DiagDeviceCtrlMessage>,
     cancellation_token: CancellationToken,
 ) {
-    if config.key_input_mode == 0 {
+    if config.key_input_mode == KeyInputMode::Disabled {
         return;
     }
 
@@ -81,8 +81,9 @@ pub fn run_key_input_thread(
                             {
                                 error!("Failed to send StopRecording: {e}");
                             }
-                            if let Err(e) =
-                                diag_tx.send(DiagDeviceCtrlMessage::StartRecording).await
+                            if let Err(e) = diag_tx
+                                .send(DiagDeviceCtrlMessage::StartRecording { response_tx: None })
+                                .await
                             {
                                 error!("Failed to send StartRecording: {e}");
                             }

daemon/src/lib.rs

@@ -0,0 +1,78 @@
+pub mod analysis;
+pub mod battery;
+pub mod config;
+pub mod crypto_provider;
+pub mod diag;
+pub mod display;
+pub mod error;
+pub mod gps;
+pub mod key_input;
+pub mod notifications;
+pub mod pcap;
+pub mod qmdl_store;
+pub mod server;
+pub mod stats;
+pub mod update;
+pub mod webdav;
+
+#[cfg(feature = "apidocs")]
+use utoipa::OpenApi;
+
+// Add anotated paths to api docs
+#[cfg(feature = "apidocs")]
+#[derive(OpenApi)]
+#[openapi(
+    info(
+        description = "OpenAPI documentation for Rayhunter daemon\n\n**Note:** API endpoints are subject to change as needs arise, though we will try to keep them as stable as possible and notify about breaking changes in the changelogs for new versions.\n\nNo endpoints require any authentication. To use the in-browser execution on this page, you may need to disable CORS temporarily for your browser.",
+        license(
+            name = "GNU General Public License v3.0",
+            url = "https://github.com/EFForg/rayhunter/blob/main/LICENSE"
+        )
+    ),
+    paths(
+        pcap::get_pcap,
+        server::get_qmdl,
+        server::get_zip,
+        stats::get_system_stats,
+        stats::get_qmdl_manifest,
+        stats::get_update_status,
+        stats::get_log,
+        diag::start_recording,
+        diag::stop_recording,
+        diag::delete_recording,
+        diag::delete_all_recordings,
+        diag::get_analysis_report,
+        analysis::get_analysis_status,
+        analysis::start_analysis,
+        server::get_config,
+        server::set_config,
+        server::test_notification,
+        server::get_time,
+        server::set_time_offset,
+        server::debug_set_display_state,
+        gps::post_gps,
+        gps::get_gps
+    ),
+    servers(
+        (
+            url = "http://localhost:8080",
+            description = "ADB port bridge"
+        ),
+        (
+            url = "http://192.168.1.1:8080",
+            description = "Orbic WiFi GUI"
+        ),
+        (
+            url = "http://192.168.0.1:8080",
+            description = "TPLink WiFi GUI"
+        ),
+    )
+)]
+pub struct ApiDocs;
+
+#[cfg(feature = "apidocs")]
+impl ApiDocs {
+    pub fn generate() -> String {
+        ApiDocs::openapi().to_pretty_json().unwrap()
+    }
+}

daemon/src/main.rs

@@ -1,30 +1,39 @@
 mod analysis;
 mod battery;
 mod config;
+mod crypto_provider;
 mod diag;
 mod display;
 mod error;
+mod gps;
 mod key_input;
 mod notifications;
 mod pcap;
 mod qmdl_store;
 mod server;
 mod stats;
+mod update;
+mod webdav;
 
 use std::net::SocketAddr;
 use std::sync::Arc;
 
 use crate::battery::run_battery_notification_worker;
-use crate::config::{parse_args, parse_config};
+use crate::config::{GpsMode, parse_args, parse_config};
 use crate::diag::run_diag_read_thread;
 use crate::error::RayhunterError;
+use crate::gps::{get_gps, post_gps};
 use crate::notifications::{NotificationService, run_notification_worker};
 use crate::pcap::get_pcap;
 use crate::qmdl_store::RecordingStore;
 use crate::server::{
-    ServerState, debug_set_display_state, get_config, get_qmdl, get_zip, serve_static, set_config,
+    ServerState, debug_set_display_state, get_config, get_qmdl, get_time, get_wifi_status, get_zip,
+    scan_wifi, serve_static, set_config, set_time_offset, test_notification,
 };
-use crate::stats::{get_qmdl_manifest, get_system_stats};
+use crate::stats::{get_qmdl_manifest, get_system_stats, get_update_status};
+use crate::update::{UpdateStatus, run_update_check_worker};
+use crate::webdav::run_webdav_upload_worker;
+use wifi_station::WifiStatus;
 
 use analysis::{
     AnalysisCtrlMessage, AnalysisStatus, get_analysis_status, run_analysis_thread, start_analysis,
@@ -36,10 +45,9 @@ use diag::{
     DiagDeviceCtrlMessage, delete_all_recordings, delete_recording, get_analysis_report,
     start_recording, stop_recording,
 };
-use log::{error, info};
+use log::{error, info, warn};
 use qmdl_store::RecordingStoreError;
 use rayhunter::Device;
-use rayhunter::diag_device::DiagDevice;
 use stats::get_log;
 use tokio::net::TcpListener;
 use tokio::select;
@@ -57,6 +65,7 @@ fn get_router() -> AppRouter {
         .route("/api/qmdl/{name}", get(get_qmdl))
         .route("/api/zip/{name}", get(get_zip))
         .route("/api/system-stats", get(get_system_stats))
+        .route("/api/update-status", get(get_update_status))
         .route("/api/qmdl-manifest", get(get_qmdl_manifest))
         .route("/api/log", get(get_log))
         .route("/api/start-recording", post(start_recording))
@@ -68,7 +77,14 @@ fn get_router() -> AppRouter {
         .route("/api/analysis/{name}", post(start_analysis))
         .route("/api/config", get(get_config))
         .route("/api/config", post(set_config))
+        .route("/api/test-notification", post(test_notification))
+        .route("/api/wifi-status", get(get_wifi_status))
+        .route("/api/wifi-scan", post(scan_wifi))
+        .route("/api/time", get(get_time))
+        .route("/api/time-offset", post(set_time_offset))
         .route("/api/debug/display-state", post(debug_set_display_state))
+        .route("/api/gps", get(get_gps))
+        .route("/api/gps", post(post_gps))
         .route("/", get(|| async { Redirect::permanent("/index.html") }))
         .route("/{*path}", get(serve_static))
 }
@@ -167,14 +183,9 @@ fn run_shutdown_thread(
 
 #[tokio::main(flavor = "current_thread")]
 async fn main() -> Result<(), RayhunterError> {
-    env_logger::init();
+    rayhunter::init_logging(log::LevelFilter::Info);
 
-    #[cfg(feature = "rustcrypto-tls")]
-    {
-        rustls_rustcrypto::provider()
-            .install_default()
-            .expect("Couldn't install rustcrypto provider");
-    }
+    crate::crypto_provider::install_default();
 
     let args = parse_args();
 
@@ -203,22 +214,23 @@ async fn run_with_config(
     let (analysis_tx, analysis_rx) = mpsc::channel::<AnalysisCtrlMessage>(5);
     let restart_token = CancellationToken::new();
     let shutdown_token = restart_token.child_token();
+    // Ensure shutdown_token is cancelled when this function exits for any
+    // reason (e.g. diag device init failure), so all spawned tasks get
+    // signaled to stop.
+    let _shutdown_guard = shutdown_token.clone().drop_guard();
 
     let notification_service = NotificationService::new(config.ntfy_url.clone());
+    let update_status_lock = Arc::new(RwLock::new(UpdateStatus::default()));
 
     if !config.debug_mode {
-        info!("Using configuration for device: {0:?}", config.device);
-        let mut dev = DiagDevice::new(&config.device)
-            .await
-            .map_err(RayhunterError::DiagInitError)?;
-        dev.config_logs()
-            .await
-            .map_err(RayhunterError::DiagInitError)?;
-
         info!("Starting Diag Thread");
+        let gps_fixed_coords = match (config.gps_fixed_latitude, config.gps_fixed_longitude) {
+            (Some(lat), Some(lon)) => Some((lat, lon)),
+            _ => None,
+        };
         run_diag_read_thread(
             &task_tracker,
-            dev,
+            config.device.clone(),
             diag_rx,
             diag_tx.clone(),
             ui_update_tx.clone(),
@@ -226,11 +238,15 @@ async fn run_with_config(
             analysis_tx.clone(),
             config.analyzers.clone(),
             notification_service.new_handler(),
+            config.min_space_to_start_recording_mb,
+            config.min_space_to_continue_recording_mb,
+            config.gps_mode,
+            gps_fixed_coords,
         );
         info!("Starting UI");
 
         let update_ui = match &config.device {
-            Device::Orbic => display::orbic::update_ui,
+            Device::Orbic | Device::Moxee => display::orbic::update_ui,
             Device::Tplink => display::tplink::update_ui,
             Device::Tmobile => display::tmobile::update_ui,
             Device::Wingtech => display::wingtech::update_ui,
@@ -246,6 +262,16 @@ async fn run_with_config(
             diag_tx.clone(),
             shutdown_token.clone(),
         );
+
+        if config.auto_check_updates {
+            run_update_check_worker(
+                &task_tracker,
+                shutdown_token.clone(),
+                update_status_lock.clone(),
+                notification_service.new_handler(),
+                config.enabled_notifications.clone(),
+            );
+        }
     }
 
     let analysis_status_lock = Arc::new(RwLock::new(analysis_status));
@@ -265,12 +291,14 @@ async fn run_with_config(
         analysis_tx.clone(),
     );
 
-    run_battery_notification_worker(
-        &task_tracker,
-        config.device.clone(),
-        notification_service.new_handler(),
-        shutdown_token.clone(),
-    );
+    if !config.debug_mode {
+        run_battery_notification_worker(
+            &task_tracker,
+            config.device.clone(),
+            notification_service.new_handler(),
+            shutdown_token.clone(),
+        );
+    }
 
     run_notification_worker(
         &task_tracker,
@@ -278,6 +306,41 @@ async fn run_with_config(
         config.enabled_notifications.clone(),
     );
 
+    let wifi_status = Arc::new(RwLock::new(WifiStatus::default()));
+    if !config.debug_mode {
+        wifi_station::run_wifi_client(
+            &task_tracker,
+            &config.wifi_config(),
+            shutdown_token.clone(),
+            wifi_status.clone(),
+        );
+    }
+
+    if !config.webdav.url.trim().is_empty() {
+        run_webdav_upload_worker(
+            &task_tracker,
+            shutdown_token.clone(),
+            qmdl_store_lock.clone(),
+            config.webdav.clone().into(),
+        );
+    }
+    let initial_gps = if config.gps_mode == GpsMode::Fixed {
+        match (config.gps_fixed_latitude, config.gps_fixed_longitude) {
+            (Some(lat), Some(lon)) => Some(gps::GpsData {
+                latitude: lat,
+                longitude: lon,
+            }),
+            _ => {
+                warn!(
+                    "gps_mode is Fixed but gps_fixed_latitude or gps_fixed_longitude is missing from config — no GPS coordinates will be recorded"
+                );
+                None
+            }
+        }
+    } else {
+        None
+    };
+
     let state = Arc::new(ServerState {
         config_path: args.config_path.clone(),
         config,
@@ -287,6 +350,10 @@ async fn run_with_config(
         analysis_sender: analysis_tx,
         daemon_restart_token: restart_token.clone(),
         ui_update_sender: Some(ui_update_tx),
+        wifi_status,
+        wifi_scan_lock: tokio::sync::Mutex::new(()),
+        gps_state: Arc::new(tokio::sync::RwLock::new(initial_gps)),
+        update_status_lock: update_status_lock.clone(),
     });
     run_server(&task_tracker, state, shutdown_token.clone()).await;
 

daemon/src/notifications.rs

@@ -6,13 +6,27 @@ use std::{
 
 use log::error;
 use serde::{Deserialize, Serialize};
+use thiserror::Error;
 use tokio::sync::mpsc::{self, error::TryRecvError};
 use tokio_util::task::TaskTracker;
 
+pub const DEFAULT_NOTIFICATION_TIMEOUT: u64 = 10; //seconds
+
+#[derive(Error, Debug)]
+pub enum NotificationError {
+    #[error("HTTP request failed: {0}")]
+    RequestFailed(#[from] reqwest::Error),
+    #[error("Server returned error status: {0}")]
+    HttpError(reqwest::StatusCode),
+}
+
+/// Enum of valid notification types
 #[derive(Hash, Eq, PartialEq, Debug, Clone, Serialize, Deserialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
 pub enum NotificationType {
     Warning,
     LowBattery,
+    Update,
 }
 
 pub struct Notification {
@@ -45,6 +59,7 @@ struct NotificationStatus {
 
 pub struct NotificationService {
     url: Option<String>,
+    timeout: u64,
     tx: mpsc::Sender<Notification>,
     rx: mpsc::Receiver<Notification>,
 }
@@ -52,7 +67,12 @@ pub struct NotificationService {
 impl NotificationService {
     pub fn new(url: Option<String>) -> Self {
         let (tx, rx) = mpsc::channel(10);
-        Self { url, tx, rx }
+        Self {
+            url,
+            timeout: DEFAULT_NOTIFICATION_TIMEOUT,
+            tx,
+            rx,
+        }
     }
 
     pub fn new_handler(&self) -> mpsc::Sender<Notification> {
@@ -60,6 +80,27 @@ impl NotificationService {
     }
 }
 
+/// Sends a notification message to the specified URL.
+pub async fn send_notification(
+    http_client: &reqwest::Client,
+    url: &str,
+    message: String,
+    timeout: u64,
+) -> Result<(), NotificationError> {
+    let response = http_client
+        .post(url)
+        .body(message)
+        .timeout(Duration::from_secs(timeout))
+        .send()
+        .await?;
+
+    if response.status().is_success() {
+        Ok(())
+    } else {
+        Err(NotificationError::HttpError(response.status()))
+    }
+}
+
 pub fn run_notification_worker(
     task_tracker: &TaskTracker,
     mut notification_service: NotificationService,
@@ -125,24 +166,21 @@ pub fn run_notification_worker(
                         }
                     }
 
-                    match http_client
-                        .post(&url)
-                        .body(notification.message.clone())
-                        .send()
-                        .await
+                    match send_notification(
+                        &http_client,
+                        &url,
+                        notification.message.clone(),
+                        notification_service.timeout,
+                    )
+                    .await
                     {
-                        Ok(response) => {
-                            if response.status().is_success() {
-                                notification.last_sent = Some(Instant::now());
-                                notification.failed_since_last_success = 0;
-                                notification.needs_sending = false;
-                            } else {
-                                notification.failed_since_last_success += 1;
-                                notification.last_attempt = Some(Instant::now());
-                            }
+                        Ok(()) => {
+                            notification.last_sent = Some(Instant::now());
+                            notification.failed_since_last_success = 0;
+                            notification.needs_sending = false;
                         }
                         Err(e) => {
-                            error!("Failed to send notification to ntfy: {e}");
+                            error!("Failed to send notification: {e}");
                             notification.failed_since_last_success += 1;
                             notification.last_attempt = Some(Instant::now());
                         }
@@ -162,3 +200,243 @@ pub fn run_notification_worker(
         }
     });
 }
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use axum::{Router, body::Bytes, extract::State, routing::post};
+    use std::sync::Arc;
+    use tokio::net::TcpListener;
+    use tokio::sync::Mutex;
+
+    #[derive(Clone)]
+    struct TestServerState {
+        received_messages: Arc<Mutex<Vec<String>>>,
+    }
+
+    async fn capture_notification(
+        State(state): State<TestServerState>,
+        body: Bytes,
+    ) -> &'static str {
+        let message = String::from_utf8_lossy(&body).to_string();
+        state.received_messages.lock().await.push(message);
+        "OK"
+    }
+
+    async fn setup_test_server() -> (Arc<Mutex<Vec<String>>>, String) {
+        crate::crypto_provider::install_default();
+
+        let received_messages = Arc::new(Mutex::new(Vec::new()));
+        let test_state = TestServerState {
+            received_messages: received_messages.clone(),
+        };
+
+        let app = Router::new()
+            .route("/", post(capture_notification))
+            .with_state(test_state);
+
+        let listener = TcpListener::bind("127.0.0.1:0").await.unwrap();
+        let addr = listener.local_addr().unwrap();
+        let url = format!("http://{}", addr);
+
+        tokio::spawn(async move {
+            axum::serve(listener, app).await.unwrap();
+        });
+
+        tokio::time::sleep(Duration::from_millis(100)).await;
+
+        (received_messages, url)
+    }
+
+    async fn setup_timeout_server(timeout: u64) -> String {
+        crate::crypto_provider::install_default();
+
+        let listener = TcpListener::bind("127.0.0.1:0").await.unwrap();
+        let addr = listener.local_addr().unwrap();
+        let url = format!("http://{}", addr);
+
+        tokio::spawn(async move {
+            // Accept the connection but don't respond in the timeout
+            let (_socket, _addr) = listener.accept().await.unwrap();
+            tokio::time::sleep(Duration::from_secs(timeout * 2)).await;
+        });
+
+        tokio::time::sleep(Duration::from_millis(100)).await;
+
+        url
+    }
+
+    async fn cleanup_worker(sender: mpsc::Sender<Notification>, tracker: TaskTracker) {
+        drop(sender);
+        tracker.close();
+        tracker.wait().await;
+    }
+
+    #[tokio::test]
+    async fn test_send_notification_times_out() {
+        let timeout: u64 = 2;
+        let url = setup_timeout_server(timeout).await;
+
+        let http_client = reqwest::Client::new();
+        let result = send_notification(
+            &http_client,
+            &url,
+            "test warning message".to_string(),
+            timeout,
+        )
+        .await;
+
+        match result {
+            Err(NotificationError::RequestFailed(reqwest_error)) => {
+                println!("error = {:?}", reqwest_error);
+                assert!(reqwest_error.is_timeout());
+            }
+            _ => unreachable!(),
+        }
+    }
+
+    #[tokio::test]
+    async fn test_notification_worker_sends_message() {
+        let (received_messages, url) = setup_test_server().await;
+
+        let task_tracker = TaskTracker::new();
+        let notification_service = NotificationService::new(Some(url));
+        let notification_sender = notification_service.new_handler();
+
+        run_notification_worker(
+            &task_tracker,
+            notification_service,
+            vec![NotificationType::Warning],
+        );
+
+        notification_sender
+            .send(Notification::new(
+                NotificationType::Warning,
+                "test warning message".to_string(),
+                None,
+            ))
+            .await
+            .unwrap();
+
+        tokio::time::sleep(Duration::from_secs(3)).await;
+
+        let messages = received_messages.lock().await;
+        assert_eq!(messages.len(), 1);
+        assert_eq!(messages[0], "test warning message");
+        drop(messages);
+
+        cleanup_worker(notification_sender, task_tracker).await;
+    }
+
+    #[tokio::test]
+    async fn test_notification_worker_filters_disabled_types() {
+        let (received_messages, url) = setup_test_server().await;
+
+        let task_tracker = TaskTracker::new();
+        let notification_service = NotificationService::new(Some(url));
+        let notification_sender = notification_service.new_handler();
+
+        run_notification_worker(
+            &task_tracker,
+            notification_service,
+            vec![NotificationType::Warning],
+        );
+
+        notification_sender
+            .send(Notification::new(
+                NotificationType::Warning,
+                "test warning".to_string(),
+                None,
+            ))
+            .await
+            .unwrap();
+
+        notification_sender
+            .send(Notification::new(
+                NotificationType::LowBattery,
+                "test low battery".to_string(),
+                None,
+            ))
+            .await
+            .unwrap();
+
+        tokio::time::sleep(Duration::from_secs(3)).await;
+
+        let messages = received_messages.lock().await;
+        assert_eq!(messages.len(), 1);
+        assert_eq!(messages[0], "test warning");
+        drop(messages);
+
+        cleanup_worker(notification_sender, task_tracker).await;
+    }
+
+    #[tokio::test]
+    async fn test_notification_worker_sends_enabled_types() {
+        let (received_messages, url) = setup_test_server().await;
+
+        let task_tracker = TaskTracker::new();
+        let notification_service = NotificationService::new(Some(url));
+        let notification_sender = notification_service.new_handler();
+
+        run_notification_worker(
+            &task_tracker,
+            notification_service,
+            vec![NotificationType::Warning, NotificationType::LowBattery],
+        );
+
+        notification_sender
+            .send(Notification::new(
+                NotificationType::Warning,
+                "test warning".to_string(),
+                None,
+            ))
+            .await
+            .unwrap();
+
+        notification_sender
+            .send(Notification::new(
+                NotificationType::LowBattery,
+                "test low battery".to_string(),
+                None,
+            ))
+            .await
+            .unwrap();
+
+        tokio::time::sleep(Duration::from_secs(3)).await;
+
+        let messages = received_messages.lock().await;
+        assert_eq!(messages.len(), 2);
+        // these are interchangeable, ordering not guaranteed
+        assert!(messages.contains(&"test warning".to_string()));
+        assert!(messages.contains(&"test low battery".to_string()));
+        drop(messages);
+
+        cleanup_worker(notification_sender, task_tracker).await;
+    }
+
+    #[tokio::test]
+    async fn test_notification_worker_with_no_url() {
+        let task_tracker = TaskTracker::new();
+        let notification_service = NotificationService::new(None);
+        let notification_sender = notification_service.new_handler();
+
+        run_notification_worker(
+            &task_tracker,
+            notification_service,
+            vec![NotificationType::Warning],
+        );
+
+        notification_sender
+            .send(Notification::new(
+                NotificationType::Warning,
+                "test warning".to_string(),
+                None,
+            ))
+            .await
+            .unwrap();
+
+        tokio::time::sleep(Duration::from_millis(500)).await;
+
+        cleanup_worker(notification_sender, task_tracker).await;
+    }
+}

daemon/src/pcap.rs

@@ -1,5 +1,8 @@
-use crate::ServerState;
+use crate::gps::{GpsRecord, load_gps_records};
+use crate::qmdl_store::FileKind;
+use crate::server::ServerState;
 
+use crate::config::GpsMode;
 use anyhow::Error;
 use axum::body::Body;
 use axum::extract::{Path, State};
@@ -9,15 +12,27 @@ use axum::response::{IntoResponse, Response};
 use log::error;
 use rayhunter::diag::DataType;
 use rayhunter::gsmtap_parser;
-use rayhunter::pcap::GsmtapPcapWriter;
+use rayhunter::pcap::{GpsPoint, GsmtapPcapWriter};
 use rayhunter::qmdl::QmdlReader;
 use std::sync::Arc;
 use tokio::io::{AsyncRead, AsyncWrite, duplex};
 use tokio_util::io::ReaderStream;
 
-// Streams a pcap file chunk-by-chunk to the client by reading the QMDL data
-// written so far. This is done by spawning a thread which streams chunks of
-// pcap data to a channel that's piped to the client.
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/pcap/{name}",
+    tag = "Recordings",
+    responses(
+        (status = StatusCode::OK, description = "PCAP conversion successful", content_type = "application/vnd.tcpdump.pcap"),
+        (status = StatusCode::NOT_FOUND, description = "Could not find file {name}"),
+        (status = StatusCode::SERVICE_UNAVAILABLE, description = "QMDL file is empty")
+    ),
+    params(
+        ("name" = String, Path, description = "QMDL filename to convert and download")
+    ),
+    summary = "Download a PCAP file",
+    description = "Stream a PCAP file to a client in chunks by converting the QMDL data for file {name} written so far."
+))]
 pub async fn get_pcap(
     State(state): State<Arc<ServerState>>,
     Path(mut qmdl_name): Path<String>,
@@ -38,15 +53,16 @@ pub async fn get_pcap(
     }
     let qmdl_size_bytes = entry.qmdl_size_bytes;
     let qmdl_file = qmdl_store
-        .open_entry_qmdl(entry_index)
+        .open_file(entry_index, FileKind::Qmdl)
         .await
-        .map_err(|e| (StatusCode::INTERNAL_SERVER_ERROR, format!("{e:?}")))?;
-    // the QMDL reader should stop at the last successfully written data chunk
-    // (entry.size_bytes)
+        .map_err(|e| (StatusCode::INTERNAL_SERVER_ERROR, format!("{e:?}")))?
+        .ok_or((StatusCode::NOT_FOUND, "QMDL file not found".to_string()))?;
     let (reader, writer) = duplex(1024);
+    let gps_records = load_gps_records_for_entry(&state, entry_index).await;
+    drop(qmdl_store);
 
     tokio::spawn(async move {
-        if let Err(e) = generate_pcap_data(writer, qmdl_file, qmdl_size_bytes).await {
+        if let Err(e) = generate_pcap_data(writer, qmdl_file, qmdl_size_bytes, gps_records).await {
             error!("failed to generate PCAP: {e:?}");
         }
     });
@@ -56,10 +72,68 @@ pub async fn get_pcap(
     Ok((headers, body).into_response())
 }
 
+pub(crate) async fn load_gps_records_for_entry(
+    state: &Arc<ServerState>,
+    entry_index: usize,
+) -> Vec<GpsRecord> {
+    let qmdl_store = state.qmdl_store_lock.read().await;
+    match qmdl_store.open_file(entry_index, FileKind::Gps).await {
+        Ok(Some(file)) => load_gps_records(file).await,
+        Ok(None) => {
+            let gps_mode = qmdl_store
+                .manifest
+                .entries
+                .get(entry_index)
+                .and_then(|e| e.gps_mode);
+            if gps_mode.is_some_and(|m| m != GpsMode::Disabled) {
+                error!(
+                    "GPS storage expected for entry {entry_index} (mode: {gps_mode:?}) but not found"
+                );
+            }
+            vec![]
+        }
+        Err(e) => {
+            error!("failed to open GPS storage: {e}");
+            vec![]
+        }
+    }
+}
+
+fn record_timestamp(r: &GpsRecord) -> i64 {
+    r.latest_packet_timestamp.unwrap_or(i64::MIN)
+}
+
+fn find_nearest_gps(records: &[GpsRecord], packet_timestamp: i64) -> Option<GpsPoint> {
+    if records.is_empty() {
+        return None;
+    }
+    let idx = records.partition_point(|r| record_timestamp(r) <= packet_timestamp);
+    let record = if idx == 0 {
+        &records[0]
+    } else if idx >= records.len() {
+        &records[records.len() - 1]
+    } else {
+        let (before, after) = (&records[idx - 1], &records[idx]);
+        let before_delta = packet_timestamp - record_timestamp(before);
+        let after_delta = record_timestamp(after) - packet_timestamp;
+        if before_delta <= after_delta {
+            before
+        } else {
+            after
+        }
+    };
+    Some(GpsPoint {
+        latitude: record.lat,
+        longitude: record.lon,
+        unix_ts: record_timestamp(record),
+    })
+}
+
 pub async fn generate_pcap_data<R, W>(
     writer: W,
     qmdl_file: R,
     qmdl_size_bytes: usize,
+    gps_records: Vec<GpsRecord>,
 ) -> Result<(), Error>
 where
     W: AsyncWrite + Unpin + Send,
@@ -74,13 +148,15 @@ where
             continue;
         }
 
-        for maybe_msg in container.into_messages() {
+        for maybe_msg in container.messages() {
             match maybe_msg {
                 Ok(msg) => {
                     let maybe_gsmtap_msg = gsmtap_parser::parse(msg)?;
                     if let Some((timestamp, gsmtap_msg)) = maybe_gsmtap_msg {
+                        let packet_unix_ts = timestamp.to_datetime().timestamp();
+                        let gps = find_nearest_gps(&gps_records, packet_unix_ts);
                         pcap_writer
-                            .write_gsmtap_message(gsmtap_msg, timestamp)
+                            .write_gsmtap_message(gsmtap_msg, timestamp, gps.as_ref())
                             .await?;
                     }
                 }
@@ -91,3 +167,68 @@ where
 
     Ok(())
 }
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    fn rec(latest_packet_timestamp: i64, lat: f64, lon: f64) -> GpsRecord {
+        GpsRecord {
+            latest_packet_timestamp: Some(latest_packet_timestamp),
+            system_time: 0,
+            lat,
+            lon,
+        }
+    }
+
+    #[test]
+    fn test_empty_returns_none() {
+        assert!(find_nearest_gps(&[], 100).is_none());
+    }
+
+    #[test]
+    fn test_single_record_always_returned() {
+        let records = vec![rec(100, 1.0, 2.0)];
+        assert_eq!(find_nearest_gps(&records, 0).unwrap().unix_ts, 100);
+        assert_eq!(find_nearest_gps(&records, 200).unwrap().unix_ts, 100);
+    }
+
+    #[test]
+    fn test_before_all_records_returns_first() {
+        let records = vec![rec(100, 1.0, 2.0), rec(200, 3.0, 4.0)];
+        assert_eq!(find_nearest_gps(&records, 50).unwrap().unix_ts, 100);
+    }
+
+    #[test]
+    fn test_after_all_records_returns_last() {
+        let records = vec![rec(100, 1.0, 2.0), rec(200, 3.0, 4.0)];
+        assert_eq!(find_nearest_gps(&records, 300).unwrap().unix_ts, 200);
+    }
+
+    #[test]
+    fn test_exact_match() {
+        let records = vec![rec(100, 1.0, 2.0), rec(200, 3.0, 4.0), rec(300, 5.0, 6.0)];
+        assert_eq!(find_nearest_gps(&records, 200).unwrap().unix_ts, 200);
+    }
+
+    #[test]
+    fn test_closer_to_before() {
+        // packet at 130: delta to before(100)=30, delta to after(200)=70 → picks before
+        let records = vec![rec(100, 1.0, 2.0), rec(200, 3.0, 4.0)];
+        assert_eq!(find_nearest_gps(&records, 130).unwrap().unix_ts, 100);
+    }
+
+    #[test]
+    fn test_closer_to_after() {
+        // packet at 170: delta to before(100)=70, delta to after(200)=30 → picks after
+        let records = vec![rec(100, 1.0, 2.0), rec(200, 3.0, 4.0)];
+        assert_eq!(find_nearest_gps(&records, 170).unwrap().unix_ts, 200);
+    }
+
+    #[test]
+    fn test_equidistant_prefers_before() {
+        // packet at 150: delta to before(100)=50, delta to after(200)=50 → tie, picks before
+        let records = vec![rec(100, 1.0, 2.0), rec(200, 3.0, 4.0)];
+        assert_eq!(find_nearest_gps(&records, 150).unwrap().unix_ts, 100);
+    }
+}

daemon/src/qmdl_store.rs

@@ -1,8 +1,10 @@
+use std::fmt::Display;
 use std::io::{self, ErrorKind};
 use std::os::unix::fs::MetadataExt;
 use std::path::{Path, PathBuf};
 
-use chrono::{DateTime, Local};
+use crate::config::GpsMode;
+use chrono::{DateTime, Local, TimeDelta};
 use log::{info, warn};
 use rayhunter::util::RuntimeMetadata;
 use serde::{Deserialize, Serialize};
@@ -22,6 +24,8 @@ pub enum RecordingStoreError {
     CreateFileError(tokio::io::Error),
     #[error("Couldn't read file: {0}")]
     ReadFileError(tokio::io::Error),
+    #[error("Couldn't write file: {0}")]
+    WriteFileError(tokio::io::Error),
     #[error("Couldn't delete file: {0}")]
     DeleteFileError(tokio::io::Error),
     #[error("Couldn't open directory at path: {0}")]
@@ -32,6 +36,46 @@ pub enum RecordingStoreError {
     WriteManifestError(tokio::io::Error),
     #[error("Couldn't parse QMDL store manifest file: {0}")]
     ParseManifestError(toml::de::Error),
+    #[error("Insufficient disk space: {0}MB available, {1}MB required")]
+    InsufficientDiskSpace(u64, u64),
+    #[error("GPS storage directory not found")]
+    GpsStorageNotFound,
+    #[error("Serialization error: {0}")]
+    SerializationError(#[from] serde_json::Error),
+}
+
+#[derive(Debug, Clone, Copy, PartialEq, Eq)]
+pub enum FileKind {
+    Qmdl,
+    Analysis,
+    Gps,
+}
+
+impl FileKind {
+    // List of all possible physical files on disk.
+    pub const ALL: &'static [FileKind] = &[FileKind::Qmdl, FileKind::Analysis, FileKind::Gps];
+
+    pub fn get_filename(&self, entry_name: &str) -> String {
+        match self {
+            FileKind::Qmdl => format!("{}.qmdl", entry_name),
+            FileKind::Analysis => format!("{}.ndjson", entry_name),
+            FileKind::Gps => format!("{}-gps.ndjson", entry_name),
+        }
+    }
+
+    pub fn get_filepath<P: AsRef<Path>>(&self, entry_name: &str, base_path: P) -> PathBuf {
+        base_path.as_ref().join(self.get_filename(entry_name))
+    }
+}
+
+impl Display for FileKind {
+    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
+        match self {
+            FileKind::Qmdl => write!(f, "QMDL"),
+            FileKind::Analysis => write!(f, "analysis"),
+            FileKind::Gps => write!(f, "GPS"),
+        }
+    }
 }
 
 pub struct RecordingStore {
@@ -45,20 +89,38 @@ pub struct Manifest {
     pub entries: Vec<ManifestEntry>,
 }
 
+/// The structure of an entry in the QMDL manifest table
 #[derive(Deserialize, Serialize, Clone, PartialEq, Debug)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
 pub struct ManifestEntry {
+    /// The name of the entry
     pub name: String,
+    /// The system time when recording began
+    #[cfg_attr(feature = "apidocs", schema(value_type = String))]
     pub start_time: DateTime<Local>,
+    /// The system time when the last message was recorded to the file
+    #[cfg_attr(feature = "apidocs", schema(value_type = String))]
     pub last_message_time: Option<DateTime<Local>>,
+    /// The size of the QMDL file in bytes
     pub qmdl_size_bytes: usize,
+    /// The rayhunter daemon version which generated the file
     pub rayhunter_version: Option<String>,
+    /// The OS which created the file
     pub system_os: Option<String>,
+    /// The architecture on which the OS was running
     pub arch: Option<String>,
+    #[serde(default)]
+    pub stop_reason: Option<String>,
+    /// When the manifest was uploaded to a WebDAV server
+    #[cfg_attr(feature = "apidocs", schema(value_type = String))]
+    pub upload_time: Option<DateTime<Local>>,
+    #[serde(default)]
+    pub gps_mode: Option<GpsMode>,
 }
 
 impl ManifestEntry {
-    fn new() -> Self {
-        let now = Local::now();
+    fn new(gps_mode: GpsMode) -> Self {
+        let now = rayhunter::clock::get_adjusted_now();
         let metadata = RuntimeMetadata::new();
         ManifestEntry {
             name: format!("{}", now.timestamp()),
@@ -68,19 +130,14 @@ impl ManifestEntry {
             rayhunter_version: Some(metadata.rayhunter_version),
             system_os: Some(metadata.system_os),
             arch: Some(metadata.arch),
+            stop_reason: None,
+            upload_time: None,
+            gps_mode: Some(gps_mode),
         }
     }
 
-    pub fn get_qmdl_filepath<P: AsRef<Path>>(&self, path: P) -> PathBuf {
-        let mut filepath = path.as_ref().join(&self.name);
-        filepath.set_extension("qmdl");
-        filepath
-    }
-
-    pub fn get_analysis_filepath<P: AsRef<Path>>(&self, path: P) -> PathBuf {
-        let mut filepath = path.as_ref().join(&self.name);
-        filepath.set_extension("ndjson");
-        filepath
+    pub fn get_filepath<P: AsRef<Path>>(&self, file_kind: FileKind, path: P) -> PathBuf {
+        file_kind.get_filepath(&self.name, path)
     }
 }
 
@@ -197,11 +254,14 @@ impl RecordingStore {
                 rayhunter_version: None,
                 system_os: None,
                 arch: None,
+                stop_reason: None,
+                upload_time: None,
+                gps_mode: None,
             });
         }
 
         // sort chronologically
-        manifest_entries.sort_by(|a, b| a.start_time.cmp(&b.start_time));
+        manifest_entries.sort_by_key(|a| a.start_time);
 
         let mut store = RecordingStore {
             path: path.as_ref().to_path_buf(),
@@ -229,43 +289,63 @@ impl RecordingStore {
     // Closes the current entry (if needed), creates a new entry based on the
     // current time, and updates the manifest. Returns a tuple of the entry's
     // newly created QMDL file and analysis file.
-    pub async fn new_entry(&mut self) -> Result<(File, File), RecordingStoreError> {
+    pub async fn new_entry(
+        &mut self,
+        gps_mode: GpsMode,
+    ) -> Result<(File, File), RecordingStoreError> {
         // if we've already got an entry open, close it
         if self.current_entry.is_some() {
             self.close_current_entry().await?;
         }
-        let new_entry = ManifestEntry::new();
-        let qmdl_filepath = new_entry.get_qmdl_filepath(&self.path);
+        let new_entry = ManifestEntry::new(gps_mode);
+        let qmdl_filepath = new_entry.get_filepath(FileKind::Qmdl, &self.path);
         let qmdl_file = File::create(&qmdl_filepath)
             .await
             .map_err(RecordingStoreError::CreateFileError)?;
-        let analysis_filepath = new_entry.get_analysis_filepath(&self.path);
+        let analysis_filepath = new_entry.get_filepath(FileKind::Analysis, &self.path);
         let analysis_file = File::create(&analysis_filepath)
             .await
             .map_err(RecordingStoreError::CreateFileError)?;
+        let gps_filepath = new_entry.get_filepath(FileKind::Gps, &self.path);
+        File::create(&gps_filepath)
+            .await
+            .map_err(RecordingStoreError::CreateFileError)?;
         self.manifest.entries.push(new_entry);
         self.current_entry = Some(self.manifest.entries.len() - 1);
         self.write_manifest().await?;
         Ok((qmdl_file, analysis_file))
     }
 
-    // Returns the corresponding QMDL file for a given entry
-    pub async fn open_entry_qmdl(&self, entry_index: usize) -> Result<File, RecordingStoreError> {
-        let entry = &self.manifest.entries[entry_index];
-        File::open(entry.get_qmdl_filepath(&self.path))
-            .await
-            .map_err(RecordingStoreError::ReadFileError)
-    }
-
-    // Returns the corresponding QMDL file for a given entry
-    pub async fn open_entry_analysis(
+    pub async fn open_file(
         &self,
         entry_index: usize,
-    ) -> Result<File, RecordingStoreError> {
+        file_kind: FileKind,
+    ) -> Result<Option<File>, RecordingStoreError> {
         let entry = &self.manifest.entries[entry_index];
-        File::open(entry.get_analysis_filepath(&self.path))
+        let filepath = file_kind.get_filepath(&entry.name, &self.path);
+
+        match File::open(&filepath).await {
+            Ok(file) => Ok(Some(file)),
+            Err(e) if e.kind() == ErrorKind::NotFound => Ok(None),
+            Err(e) => Err(RecordingStoreError::ReadFileError(e)),
+        }
+    }
+
+    pub async fn open_entry_gps_for_append(
+        &self,
+        entry_index: usize,
+    ) -> Result<Option<File>, RecordingStoreError> {
+        let entry = &self.manifest.entries[entry_index];
+        match OpenOptions::new()
+            .create(true)
+            .append(true)
+            .open(entry.get_filepath(FileKind::Gps, &self.path))
             .await
-            .map_err(RecordingStoreError::ReadFileError)
+        {
+            Ok(file) => Ok(Some(file)),
+            Err(e) if e.kind() == ErrorKind::NotFound => Ok(None),
+            Err(e) => Err(RecordingStoreError::CreateFileError(e)),
+        }
     }
 
     pub async fn clear_and_open_entry_analysis(
@@ -276,7 +356,7 @@ impl RecordingStore {
         let file = OpenOptions::new()
             .write(true)
             .truncate(true)
-            .open(entry.get_analysis_filepath(&self.path))
+            .open(entry.get_filepath(FileKind::Analysis, &self.path))
             .await
             .map_err(RecordingStoreError::ReadFileError)?;
         Ok(file)
@@ -300,7 +380,8 @@ impl RecordingStore {
         size_bytes: usize,
     ) -> Result<(), RecordingStoreError> {
         self.manifest.entries[entry_index].qmdl_size_bytes = size_bytes;
-        self.manifest.entries[entry_index].last_message_time = Some(Local::now());
+        self.manifest.entries[entry_index].last_message_time =
+            Some(rayhunter::clock::get_adjusted_now());
         self.write_manifest().await
     }
 
@@ -326,6 +407,23 @@ impl RecordingStore {
         Ok(())
     }
 
+    pub fn get_next_unuploaded_entry(&self, min_age: TimeDelta) -> Option<String> {
+        let now = rayhunter::clock::get_adjusted_now();
+        self.manifest
+            .entries
+            .iter()
+            .filter_map(|entry| {
+                if self.is_current_entry(&entry.name) || entry.upload_time.is_some() {
+                    return None;
+                }
+                let age = now - entry.last_message_time.unwrap_or(entry.start_time);
+
+                (age > min_age).then_some((&entry.name, age))
+            })
+            .max_by_key(|(_, age)| *age)
+            .map(|(name, _)| name.clone())
+    }
+
     // Finds an entry by filename
     pub fn entry_for_name(&self, name: &str) -> Option<(usize, &ManifestEntry)> {
         let entry_index = self
@@ -341,6 +439,33 @@ impl RecordingStore {
         Some((entry_index, &self.manifest.entries[entry_index]))
     }
 
+    pub async fn set_current_stop_reason(
+        &mut self,
+        reason: String,
+    ) -> Result<(), RecordingStoreError> {
+        if let Some(idx) = self.current_entry {
+            self.manifest.entries[idx].stop_reason = Some(reason);
+            self.write_manifest().await?;
+        }
+        Ok(())
+    }
+
+    pub async fn mark_entry_as_uploaded(
+        &mut self,
+        name: &str,
+        upload_time: DateTime<Local>,
+    ) -> Result<(), RecordingStoreError> {
+        let entry_index = self
+            .manifest
+            .entries
+            .iter()
+            .position(|entry| entry.name == name)
+            .ok_or(RecordingStoreError::NoSuchEntryError)?;
+        self.manifest.entries[entry_index].upload_time = Some(upload_time);
+        self.write_manifest().await?;
+        Ok(())
+    }
+
     pub fn is_current_entry(&self, name: &str) -> bool {
         match self.current_entry {
             Some(idx) => match self.manifest.entries.get(idx) {
@@ -369,14 +494,13 @@ impl RecordingStore {
         };
         let entry_to_delete = self.manifest.entries.remove(entry_to_delete_idx);
         self.write_manifest().await?;
-        let qmdl_filepath = entry_to_delete.get_qmdl_filepath(&self.path);
-        let analysis_filepath = entry_to_delete.get_analysis_filepath(&self.path);
-        remove_file_if_exists(&qmdl_filepath)
-            .await
-            .map_err(RecordingStoreError::DeleteFileError)?;
-        remove_file_if_exists(&analysis_filepath)
-            .await
-            .map_err(RecordingStoreError::DeleteFileError)?;
+
+        for &file_kind in FileKind::ALL {
+            let filepath = file_kind.get_filepath(&entry_to_delete.name, &self.path);
+            remove_file_if_exists(&filepath)
+                .await
+                .map_err(RecordingStoreError::DeleteFileError)?;
+        }
         Ok(())
     }
 
@@ -387,20 +511,16 @@ impl RecordingStore {
 
         let mut keep = Vec::new();
 
-        for entry in &self.manifest.entries {
-            let qmdl_filepath = entry.get_qmdl_filepath(&self.path);
-            let analysis_filepath = entry.get_analysis_filepath(&self.path);
-
-            if let Err(e) = remove_file_if_exists(&qmdl_filepath).await {
-                log::warn!("failed to remove {qmdl_filepath:?}: {e:?}");
-                keep.push(true);
-                continue;
-            }
-
-            if let Err(e) = remove_file_if_exists(&analysis_filepath).await {
-                log::warn!("failed to remove {analysis_filepath:?}: {e:?}");
-                keep.push(true);
-                continue;
+        'entries: for entry in &self.manifest.entries {
+            for &file_kind in FileKind::ALL {
+                let filepath = file_kind.get_filepath(&entry.name, &self.path);
+                if let Err(e) = remove_file_if_exists(&filepath).await {
+                    log::warn!("failed to remove {filepath:?}: {e:?}");
+                    // Some error happened with deleting this entry, abort and go to the next one.
+                    // Also *keep* the manifest entry.
+                    keep.push(true);
+                    continue 'entries;
+                }
             }
 
             keep.push(false);
@@ -443,7 +563,7 @@ mod tests {
     async fn test_creating_updating_and_closing_entries() {
         let dir = make_temp_dir();
         let mut store = RecordingStore::create(dir.path()).await.unwrap();
-        let _ = store.new_entry().await.unwrap();
+        let _ = store.new_entry(GpsMode::Disabled).await.unwrap();
         let entry_index = store.current_entry.unwrap();
         assert_eq!(
             RecordingStore::read_manifest(dir.path()).await.unwrap(),
@@ -480,7 +600,7 @@ mod tests {
     async fn test_create_on_existing_store() {
         let dir = make_temp_dir();
         let mut store = RecordingStore::create(dir.path()).await.unwrap();
-        let _ = store.new_entry().await.unwrap();
+        let _ = store.new_entry(GpsMode::Disabled).await.unwrap();
         let entry_index = store.current_entry.unwrap();
         store
             .update_entry_qmdl_size(entry_index, 1000)
@@ -494,9 +614,9 @@ mod tests {
     async fn test_repeated_new_entries() {
         let dir = make_temp_dir();
         let mut store = RecordingStore::create(dir.path()).await.unwrap();
-        let _ = store.new_entry().await.unwrap();
+        let _ = store.new_entry(GpsMode::Disabled).await.unwrap();
         let entry_index = store.current_entry.unwrap();
-        let _ = store.new_entry().await.unwrap();
+        let _ = store.new_entry(GpsMode::Disabled).await.unwrap();
         let new_entry_index = store.current_entry.unwrap();
         assert_ne!(entry_index, new_entry_index);
         assert_eq!(store.manifest.entries.len(), 2);
@@ -506,7 +626,7 @@ mod tests {
     async fn test_delete_all_entries() {
         let dir = make_temp_dir();
         let mut store = RecordingStore::create(dir.path()).await.unwrap();
-        let _ = store.new_entry().await.unwrap();
+        let _ = store.new_entry(GpsMode::Disabled).await.unwrap();
         assert!(store.current_entry.is_some());
 
         store.delete_all_entries().await.unwrap();
@@ -517,4 +637,78 @@ mod tests {
         store.delete_all_entries().await.unwrap();
         assert!(store.current_entry.is_none());
     }
+
+    #[tokio::test]
+    async fn test_mark_entry_as_uploaded_sets_time_and_persists() {
+        let dir = make_temp_dir();
+        let mut store = RecordingStore::create(dir.path()).await.unwrap();
+        let _ = store.new_entry(GpsMode::Disabled).await.unwrap();
+        let name = store.manifest.entries[0].name.clone();
+        store.close_current_entry().await.unwrap();
+
+        let upload_time = Local::now();
+        store
+            .mark_entry_as_uploaded(&name, upload_time)
+            .await
+            .unwrap();
+        assert_eq!(store.manifest.entries[0].upload_time, Some(upload_time));
+
+        let reloaded = RecordingStore::load(dir.path()).await.unwrap();
+        assert_eq!(reloaded.manifest.entries[0].upload_time, Some(upload_time));
+    }
+
+    #[tokio::test]
+    async fn test_mark_entry_as_uploaded_missing_entry() {
+        let dir = make_temp_dir();
+        let mut store = RecordingStore::create(dir.path()).await.unwrap();
+        assert!(matches!(
+            store.mark_entry_as_uploaded("nope", Local::now()).await,
+            Err(RecordingStoreError::NoSuchEntryError)
+        ));
+    }
+
+    #[tokio::test]
+    async fn test_get_next_unuploaded_entry() {
+        let dir = make_temp_dir();
+        let mut store = RecordingStore::create(dir.path()).await.unwrap();
+
+        for _ in 0..3 {
+            let _ = store.new_entry(GpsMode::Disabled).await.unwrap();
+        }
+
+        store.manifest.entries[0].name = "entry-0".to_owned();
+        store.manifest.entries[0].start_time = Local::now() - TimeDelta::seconds(10);
+        store.manifest.entries[0].last_message_time = None;
+
+        store.manifest.entries[1].name = "entry-1".to_owned();
+        store.manifest.entries[1].start_time = Local::now() - TimeDelta::seconds(10);
+        store.manifest.entries[1].last_message_time = Some(Local::now() - TimeDelta::seconds(5));
+
+        store.manifest.entries[2].name = "entry-2".to_owned();
+        store.manifest.entries[2].start_time = Local::now() - TimeDelta::seconds(10);
+        store.manifest.entries[2].last_message_time = Some(Local::now() - TimeDelta::seconds(1));
+
+        assert_eq!(
+            store.get_next_unuploaded_entry(TimeDelta::seconds(3600)),
+            None,
+        );
+
+        assert_eq!(
+            store.get_next_unuploaded_entry(TimeDelta::seconds(3)),
+            Some("entry-0".to_owned())
+        );
+        store
+            .mark_entry_as_uploaded("entry-0", Local::now())
+            .await
+            .unwrap();
+        assert_eq!(
+            store.get_next_unuploaded_entry(TimeDelta::seconds(3)),
+            Some("entry-1".to_owned())
+        );
+        store
+            .mark_entry_as_uploaded("entry-1", Local::now())
+            .await
+            .unwrap();
+        assert_eq!(store.get_next_unuploaded_entry(TimeDelta::seconds(3)), None);
+    }
 }

daemon/src/server.rs

@@ -9,7 +9,9 @@ use axum::extract::State;
 use axum::http::header::{self, CONTENT_LENGTH, CONTENT_TYPE};
 use axum::http::{HeaderValue, StatusCode};
 use axum::response::{IntoResponse, Response};
+use chrono::{DateTime, Local};
 use log::{error, warn};
+use serde::{Deserialize, Serialize};
 use std::sync::Arc;
 use tokio::fs::write;
 use tokio::io::{AsyncReadExt, copy, duplex};
@@ -19,12 +21,15 @@ use tokio_util::compat::FuturesAsyncWriteCompatExt;
 use tokio_util::io::ReaderStream;
 use tokio_util::sync::CancellationToken;
 
-use crate::DiagDeviceCtrlMessage;
 use crate::analysis::{AnalysisCtrlMessage, AnalysisStatus};
-use crate::config::Config;
+use crate::config::{Config, GpsMode};
+use crate::diag::DiagDeviceCtrlMessage;
 use crate::display::DisplayState;
-use crate::pcap::generate_pcap_data;
-use crate::qmdl_store::RecordingStore;
+use crate::gps::GpsData;
+use crate::notifications::DEFAULT_NOTIFICATION_TIMEOUT;
+use crate::pcap::{generate_pcap_data, load_gps_records_for_entry};
+use crate::qmdl_store::{FileKind, RecordingStore};
+use crate::update::UpdateStatus;
 
 pub struct ServerState {
     pub config_path: String,
@@ -35,8 +40,27 @@ pub struct ServerState {
     pub analysis_sender: Sender<AnalysisCtrlMessage>,
     pub daemon_restart_token: CancellationToken,
     pub ui_update_sender: Option<Sender<DisplayState>>,
+    pub wifi_status: Arc<RwLock<wifi_station::WifiStatus>>,
+    pub wifi_scan_lock: tokio::sync::Mutex<()>,
+    pub gps_state: Arc<RwLock<Option<GpsData>>>,
+    pub update_status_lock: Arc<RwLock<UpdateStatus>>,
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/qmdl/{name}",
+    tag = "Recordings",
+    responses(
+        (status = StatusCode::OK, description = "QMDL download successful", content_type = "application/octet-stream"),
+        (status = StatusCode::NOT_FOUND, description = "Could not find file {name}"),
+        (status = StatusCode::SERVICE_UNAVAILABLE, description = "QMDL file is empty, or error opening file")
+    ),
+    params(
+        ("name" = String, Path, description = "QMDL filename to convert and download")
+    ),
+    summary = "Download a QMDL file",
+    description = "Stream the QMDL file {name} to the client."
+))]
 pub async fn get_qmdl(
     State(state): State<Arc<ServerState>>,
     Path(qmdl_name): Path<String>,
@@ -48,14 +72,15 @@ pub async fn get_qmdl(
         format!("couldn't find qmdl file with name {qmdl_idx}"),
     ))?;
     let qmdl_file = qmdl_store
-        .open_entry_qmdl(entry_index)
+        .open_file(entry_index, FileKind::Qmdl)
         .await
         .map_err(|err| {
             (
                 StatusCode::INTERNAL_SERVER_ERROR,
                 format!("error opening QMDL file: {err}"),
             )
-        })?;
+        })?
+        .ok_or((StatusCode::NOT_FOUND, "QMDL file not found".to_string()))?;
     let limited_qmdl_file = qmdl_file.take(entry.qmdl_size_bytes as u64);
     let qmdl_stream = ReaderStream::new(limited_qmdl_file);
 
@@ -104,17 +129,54 @@ pub async fn serve_static(
     }
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/config",
+    tag = "Configuration",
+    responses(
+        (status = StatusCode::OK, description = "Success", body = Config)
+    ),
+    summary = "Get config",
+    description = "Show the running configuration for Rayhunter."
+))]
 pub async fn get_config(
     State(state): State<Arc<ServerState>>,
 ) -> Result<Json<Config>, (StatusCode, String)> {
-    Ok(Json(state.config.clone()))
+    let mut config = state.config.clone();
+    config.wifi_password = None;
+    Ok(Json(config))
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    post,
+    path = "/api/config",
+    tag = "Configuration",
+    request_body(
+        content = Option<[Config]>,
+        description = "Any or all configuration elements from the valid config schema to be altered may be passed. Invalid keys will be discarded. Invalid values or value types will return an error."
+    ),
+    responses(
+        (status = StatusCode::ACCEPTED, description = "Success"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Failed to parse or write config file"),
+        (status = 422, description = "Failed to deserialize JSON body")
+    ),
+    summary = "Set config",
+    description = "Write a new configuration for Rayhunter and trigger a restart."
+))]
 pub async fn set_config(
     State(state): State<Arc<ServerState>>,
-    Json(config): Json<Config>,
+    Json(mut config): Json<Config>,
 ) -> Result<(StatusCode, String), (StatusCode, String)> {
-    let config_str = toml::to_string_pretty(&config).map_err(|err| {
+    if config.gps_mode != GpsMode::Fixed {
+        config.gps_fixed_latitude = None;
+        config.gps_fixed_longitude = None;
+    }
+    let mut config_to_write = config.clone();
+    config_to_write.wifi_ssid = None;
+    config_to_write.wifi_password = None;
+    config_to_write.wifi_security = None;
+
+    let config_str = toml::to_string_pretty(&config_to_write).map_err(|err| {
         (
             StatusCode::INTERNAL_SERVER_ERROR,
             format!("failed to serialize config as TOML: {err}"),
@@ -128,6 +190,8 @@ pub async fn set_config(
         )
     })?;
 
+    wifi_station::update_wpa_conf(&config.wifi_config()).await;
+
     // Trigger daemon restart after writing config
     state.daemon_restart_token.cancel();
     Ok((
@@ -136,6 +200,135 @@ pub async fn set_config(
     ))
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    post,
+    path = "/api/test-notification",
+    tag = "Configuration",
+    responses(
+        (status = StatusCode::OK, description = "Success"),
+        (status = StatusCode::BAD_REQUEST, description = "No notification URL set"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Failed to send HTTP request. Ensure your device can reach the internet.")
+    ),
+    summary = "Test ntfy notification",
+    description = "Send a test notification to the ntfy_url in the running configuration for Rayhunter."
+))]
+pub async fn test_notification(
+    State(state): State<Arc<ServerState>>,
+) -> Result<(StatusCode, String), (StatusCode, String)> {
+    let url = state.config.ntfy_url.as_ref().ok_or((
+        StatusCode::BAD_REQUEST,
+        "No notification URL configured".to_string(),
+    ))?;
+
+    if url.is_empty() {
+        return Err((
+            StatusCode::BAD_REQUEST,
+            "Notification URL is empty".to_string(),
+        ));
+    }
+
+    let http_client = reqwest::Client::new();
+    let message = "Test notification from Rayhunter".to_string();
+
+    crate::notifications::send_notification(
+        &http_client,
+        url,
+        message,
+        DEFAULT_NOTIFICATION_TIMEOUT,
+    )
+    .await
+    .map(|()| {
+        (
+            StatusCode::OK,
+            "Test notification sent successfully".to_string(),
+        )
+    })
+    .map_err(|e| {
+        (
+            StatusCode::INTERNAL_SERVER_ERROR,
+            format!("Failed to send test notification: {e}"),
+        )
+    })
+}
+
+/// Response for GET /api/time
+#[derive(Serialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
+pub struct TimeResponse {
+    /// The raw system time (without clock offset)
+    #[cfg_attr(feature = "apidocs", schema(value_type = String))]
+    pub system_time: DateTime<Local>,
+    /// The adjusted time (system time + offset)
+    #[cfg_attr(feature = "apidocs", schema(value_type = String))]
+    pub adjusted_time: DateTime<Local>,
+    /// The current offset in seconds
+    pub offset_seconds: i64,
+}
+
+/// Request for POST /api/time-offset
+#[derive(Deserialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
+pub struct SetTimeOffsetRequest {
+    /// The offset to set, in seconds
+    pub offset_seconds: i64,
+}
+
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/time",
+    tag = "Configuration",
+    responses(
+        (status = StatusCode::OK, description = "Success", body = TimeResponse)
+    ),
+    summary = "Get time",
+    description = "Get the current time and offset (in seconds) of the device."
+))]
+pub async fn get_time() -> Json<TimeResponse> {
+    let system_time = Local::now();
+    let adjusted_time = rayhunter::clock::get_adjusted_now();
+    let offset_seconds = adjusted_time
+        .signed_duration_since(system_time)
+        .num_seconds();
+    Json(TimeResponse {
+        system_time,
+        adjusted_time,
+        offset_seconds,
+    })
+}
+
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/time-offset",
+    tag = "Configuration",
+    request_body(
+        content = SetTimeOffsetRequest
+    ),
+    responses(
+        (status = StatusCode::OK, description = "Success", body = TimeResponse)
+    ),
+    summary = "Set time offset",
+    description = "Set the difference (in seconds) between the system time and the adjusted time for Rayhunter."
+))]
+pub async fn set_time_offset(Json(req): Json<SetTimeOffsetRequest>) -> StatusCode {
+    rayhunter::clock::set_offset(chrono::TimeDelta::seconds(req.offset_seconds));
+    StatusCode::OK
+}
+
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/zip/{name}",
+    tag = "Recordings",
+    responses(
+        (status = StatusCode::OK, description = "ZIP download successful. It is possible that if the PCAP fails to convert, the same status will be returned, but the file will contain only the QMDL file.", content_type = "application/zip"),
+        (status = StatusCode::NOT_FOUND, description = "Could not find file {name}"),
+        (status = StatusCode::SERVICE_UNAVAILABLE, description = "QMDL file is empty, or error opening file")
+    ),
+    params(
+        ("name" = String, Path, description = "QMDL filename to convert and download")
+    ),
+    summary = "Download a ZIP file",
+    description = "Stream a ZIP file to the client which contains the QMDL file {name} and a PCAP generated from the same file."
+))]
 pub async fn get_zip(
     State(state): State<Arc<ServerState>>,
     Path(entry_name): Path<String>,
@@ -159,6 +352,7 @@ pub async fn get_zip(
     };
 
     let qmdl_store_lock = state.qmdl_store_lock.clone();
+    let gps_records = load_gps_records_for_entry(&state, entry_index).await;
 
     let (reader, writer) = duplex(8192);
 
@@ -166,24 +360,40 @@ pub async fn get_zip(
         let result: Result<(), Error> = async {
             let mut zip = ZipFileWriter::with_tokio(writer);
 
-            // Add QMDL file
-            {
-                let entry =
-                    ZipEntryBuilder::new(format!("{qmdl_idx}.qmdl").into(), Compression::Stored);
+            const EXCLUDED_FROM_ZIP: &[FileKind] = &[FileKind::Analysis];
+
+            // Add stored files
+            for &file_kind in FileKind::ALL {
+                if EXCLUDED_FROM_ZIP.contains(&file_kind) {
+                    continue;
+                }
+
+                let file_opt = {
+                    let qmdl_store = qmdl_store_lock.read().await;
+                    qmdl_store.open_file(entry_index, file_kind).await?
+                };
+
+                let Some(mut file) = file_opt else {
+                    continue;
+                };
+
+                let entry = ZipEntryBuilder::new(
+                    file_kind.get_filename(&qmdl_idx).into(),
+                    Compression::Stored,
+                );
                 // FuturesAsyncWriteCompatExt::compat_write because async-zip's entrystream does
                 // not impl tokio's AsyncWrite, but only future's AsyncWrite. This can be removed
                 // once https://github.com/Majored/rs-async-zip/pull/160 is released.
                 let mut entry_writer = zip.write_entry_stream(entry).await?.compat_write();
 
-                let mut qmdl_file = {
-                    let qmdl_store = qmdl_store_lock.read().await;
-                    qmdl_store
-                        .open_entry_qmdl(entry_index)
-                        .await?
-                        .take(qmdl_size_bytes as u64)
-                };
+                // Truncating to qmdl_size_bytes is an attempt to ignore partial writes by the diag
+                // thread.
+                if file_kind == FileKind::Qmdl {
+                    copy(&mut file.take(qmdl_size_bytes as u64), &mut entry_writer).await?;
+                } else {
+                    copy(&mut file, &mut entry_writer).await?;
+                }
 
-                copy(&mut qmdl_file, &mut entry_writer).await?;
                 entry_writer.into_inner().close().await?;
             }
 
@@ -196,13 +406,19 @@ pub async fn get_zip(
                 let qmdl_file_for_pcap = {
                     let qmdl_store = qmdl_store_lock.read().await;
                     qmdl_store
-                        .open_entry_qmdl(entry_index)
+                        .open_file(entry_index, FileKind::Qmdl)
                         .await?
+                        .ok_or_else(|| anyhow::anyhow!("QMDL file not found"))?
                         .take(qmdl_size_bytes as u64)
                 };
 
-                if let Err(e) =
-                    generate_pcap_data(&mut entry_writer, qmdl_file_for_pcap, qmdl_size_bytes).await
+                if let Err(e) = generate_pcap_data(
+                    &mut entry_writer,
+                    qmdl_file_for_pcap,
+                    qmdl_size_bytes,
+                    gps_records,
+                )
+                .await
                 {
                     // if we fail to generate the PCAP file, we should still continue and give the
                     // user the QMDL.
@@ -227,6 +443,70 @@ pub async fn get_zip(
     Ok((headers, body).into_response())
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/wifi-status",
+    tag = "Configuration",
+    responses(
+        (status = StatusCode::OK, description = "Success", body = wifi_station::WifiStatus)
+    ),
+    summary = "Get wifi status",
+    description = "Show the status of the wifi client."
+))]
+pub async fn get_wifi_status(
+    State(state): State<Arc<ServerState>>,
+) -> Json<wifi_station::WifiStatus> {
+    let status = state.wifi_status.read().await;
+    Json(status.clone())
+}
+
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    post,
+    path = "/api/wifi-scan",
+    tag = "Configuration",
+    responses(
+        (status = StatusCode::OK, description = "Scan success", body = inline(Vec<wifi_station::WifiNetwork>), content_type = "application/json"),
+        (status = StatusCode::TOO_MANY_REQUESTS, description = "Scan already in progress"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Scan failed"),
+    ),
+    summary = "Wifi SSID scan",
+    description = "Poll for a list of available wifi networks. Returns an array of WifiNetwork objects."
+))]
+pub async fn scan_wifi(
+    State(state): State<Arc<ServerState>>,
+) -> Result<Json<Vec<wifi_station::WifiNetwork>>, (StatusCode, String)> {
+    let _guard = state.wifi_scan_lock.try_lock().map_err(|_| {
+        (
+            StatusCode::TOO_MANY_REQUESTS,
+            "WiFi scan already in progress".to_string(),
+        )
+    })?;
+    let networks = wifi_station::scan_wifi_networks(wifi_station::STA_IFACE)
+        .await
+        .map_err(|e| {
+            (
+                StatusCode::INTERNAL_SERVER_ERROR,
+                format!("WiFi scan failed: {e}"),
+            )
+        })?;
+    Ok(Json(networks))
+}
+
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    post,
+    path = "/api/debug/display-state",
+    tag = "Configuration",
+    request_body(
+        content = DisplayState
+    ),
+    responses(
+        (status = StatusCode::OK, description = "Display state updated successfully"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Error sending update to the display"),
+        (status = StatusCode::SERVICE_UNAVAILABLE, description = "Display system not available")
+    ),
+    summary = "Set display state",
+    description = "Change the display state (color bar or otherwise) of the device for debugging purposes."
+))]
 pub async fn debug_set_display_state(
     State(state): State<Arc<ServerState>>,
     Json(display_state): Json<DisplayState>,
@@ -253,6 +533,7 @@ pub async fn debug_set_display_state(
 #[cfg(test)]
 mod tests {
     use super::*;
+    use crate::config::GpsMode;
     use async_zip::base::read::mem::ZipFileReader;
     use axum::extract::{Path, State};
     use tempfile::TempDir;
@@ -272,7 +553,7 @@ mod tests {
     ) -> String {
         let entry_name = {
             let mut store = store_lock.write().await;
-            let (mut qmdl_file, _analysis_file) = store.new_entry().await.unwrap();
+            let (mut qmdl_file, _analysis_file) = store.new_entry(GpsMode::Disabled).await.unwrap();
 
             if !test_data.is_empty() {
                 use tokio::io::AsyncWriteExt;
@@ -316,6 +597,10 @@ mod tests {
             analysis_sender: analysis_tx,
             daemon_restart_token: CancellationToken::new(),
             ui_update_sender: None,
+            wifi_status: Arc::new(RwLock::new(wifi_station::WifiStatus::default())),
+            wifi_scan_lock: tokio::sync::Mutex::new(()),
+            gps_state: Arc::new(RwLock::new(None)),
+            update_status_lock: Arc::new(RwLock::new(UpdateStatus::default())),
         })
     }
 
@@ -348,7 +633,11 @@ mod tests {
 
         assert_eq!(
             filenames,
-            vec![format!("{entry_name}.qmdl"), format!("{entry_name}.pcapng"),]
+            vec![
+                format!("{entry_name}.qmdl"),
+                format!("{entry_name}-gps.ndjson"),
+                format!("{entry_name}.pcapng"),
+            ]
         );
     }
 }

daemon/src/stats.rs

@@ -1,8 +1,10 @@
+use std::ffi::CString;
 use std::sync::Arc;
 
 use crate::battery::get_battery_status;
 use crate::error::RayhunterError;
 use crate::server::ServerState;
+use crate::update::UpdateStatus;
 use crate::{battery::BatteryState, qmdl_store::ManifestEntry};
 
 use axum::Json;
@@ -13,7 +15,9 @@ use rayhunter::{Device, util::RuntimeMetadata};
 use serde::Serialize;
 use tokio::process::Command;
 
+/// Structure of device system statistics
 #[derive(Debug, Serialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
 pub struct SystemStats {
     pub disk_stats: DiskStats,
     pub memory_stats: MemoryStats,
@@ -25,7 +29,7 @@ pub struct SystemStats {
 impl SystemStats {
     pub async fn new(qmdl_path: &str, device: &Device) -> Result<Self, String> {
         Ok(Self {
-            disk_stats: DiskStats::new(qmdl_path, device).await?,
+            disk_stats: DiskStats::new(qmdl_path)?,
             memory_stats: MemoryStats::new(device).await?,
             runtime_metadata: RuntimeMetadata::new(),
             battery_status: match get_battery_status(device).await {
@@ -40,49 +44,72 @@ impl SystemStats {
     }
 }
 
+/// Device storage information
 #[derive(Debug, Serialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
 pub struct DiskStats {
+    /// The partition to which the daemon is installed
     partition: String,
+    /// The total disk size of the partition
     total_size: String,
+    /// Total used size of the partition
     used_size: String,
+    /// Remaining free space of the partition
     available_size: String,
+    /// Disk usage displayed as percentage
     used_percent: String,
+    /// The root folder to which the partition is mounted
     mounted_on: String,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub available_bytes: Option<u64>,
 }
 
 impl DiskStats {
-    // runs "df -h <qmdl_path>" to get storage statistics for the partition containing
-    // the QMDL file.
-    pub async fn new(qmdl_path: &str, device: &Device) -> Result<Self, String> {
-        // Uz801 needs to be told to use the busybox df specifically
-        let mut df_cmd: Command;
-        if matches!(device, Device::Uz801) {
-            df_cmd = Command::new("busybox");
-            df_cmd.arg("df");
-        } else {
-            df_cmd = Command::new("df");
+    #[allow(clippy::unnecessary_cast)] // c_ulong is u32 on ARM, u64 on macOS
+    pub fn new(qmdl_path: &str) -> Result<Self, String> {
+        let c_path =
+            CString::new(qmdl_path).map_err(|e| format!("invalid path {qmdl_path}: {e}"))?;
+        let mut stat: libc::statvfs = unsafe { std::mem::zeroed() };
+        if unsafe { libc::statvfs(c_path.as_ptr(), &mut stat) } != 0 {
+            return Err(format!(
+                "statvfs({qmdl_path}) failed: {}",
+                std::io::Error::last_os_error()
+            ));
         }
-        df_cmd.arg("-h");
-        df_cmd.arg(qmdl_path);
-        let stdout = get_cmd_output(df_cmd).await?;
 
-        // Handle standard df -h format
-        let mut parts = stdout.split_whitespace().skip(7);
+        let block_size = stat.f_frsize as u64;
+        let total_kb = (stat.f_blocks as u64 * block_size / 1024) as usize;
+        let free_kb = (stat.f_bfree as u64 * block_size / 1024) as usize;
+        let available_kb = (stat.f_bavail as u64 * block_size / 1024) as usize;
+        let used_kb = total_kb.saturating_sub(free_kb);
+        let used_percent = format!(
+            "{}%",
+            ((stat.f_blocks - stat.f_bfree) * 100)
+                .checked_div(stat.f_blocks)
+                .unwrap_or(0)
+        );
+
         Ok(Self {
-            partition: parts.next().ok_or("error parsing df output")?.to_string(),
-            total_size: parts.next().ok_or("error parsing df output")?.to_string(),
-            used_size: parts.next().ok_or("error parsing df output")?.to_string(),
-            available_size: parts.next().ok_or("error parsing df output")?.to_string(),
-            used_percent: parts.next().ok_or("error parsing df output")?.to_string(),
-            mounted_on: parts.next().ok_or("error parsing df output")?.to_string(),
+            partition: qmdl_path.to_string(),
+            total_size: humanize_kb(total_kb),
+            used_size: humanize_kb(used_kb),
+            available_size: humanize_kb(available_kb),
+            used_percent,
+            mounted_on: qmdl_path.to_string(),
+            available_bytes: Some(stat.f_bavail as u64 * block_size),
         })
     }
 }
 
+/// Device memory information
 #[derive(Debug, Serialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
 pub struct MemoryStats {
+    /// The total memory available on the device
     total: String,
+    /// The currently used memory
     used: String,
+    /// Remaining free memory
     free: String,
 }
 
@@ -135,6 +162,17 @@ fn humanize_kb(kb: usize) -> String {
     format!("{:.1}M", kb as f64 / 1024.0)
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/system-stats",
+    tag = "Statistics",
+    responses(
+        (status = StatusCode::OK, description = "Success", body = SystemStats),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Error collecting statistics")
+    ),
+    summary = "Get system info",
+    description = "Display system/device statistics."
+))]
 pub async fn get_system_stats(
     State(state): State<Arc<ServerState>>,
 ) -> Result<Json<SystemStats>, (StatusCode, String)> {
@@ -151,12 +189,26 @@ pub async fn get_system_stats(
     }
 }
 
+/// QMDL manifest information
 #[derive(Serialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
 pub struct ManifestStats {
+    /// A vector containing the names of the QMDL files
     pub entries: Vec<ManifestEntry>,
+    /// The currently open QMDL file
     pub current_entry: Option<ManifestEntry>,
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/qmdl-manifest",
+    tag = "Statistics",
+    responses(
+        (status = StatusCode::OK, description = "Success", body = ManifestStats)
+    ),
+    summary = "QMDL Manifest",
+    description = "List QMDL files available on the device and some of their basic statistics."
+))]
 pub async fn get_qmdl_manifest(
     State(state): State<Arc<ServerState>>,
 ) -> Result<Json<ManifestStats>, (StatusCode, String)> {
@@ -169,6 +221,31 @@ pub async fn get_qmdl_manifest(
     }))
 }
 
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/update-status",
+    tag = "Statistics",
+    responses(
+        (status = StatusCode::OK, description = "Success", body = UpdateStatus)
+    ),
+    summary = "Rayhunter update status",
+    description = "Check for available updates for Rayhunter."
+))]
+pub async fn get_update_status(State(state): State<Arc<ServerState>>) -> Json<UpdateStatus> {
+    Json(state.update_status_lock.read().await.clone())
+}
+
+#[cfg_attr(feature = "apidocs", utoipa::path(
+    get,
+    path = "/api/log",
+    tag = "Statistics",
+    responses(
+        (status = StatusCode::OK, description = "Success", content_type = "text/plain"),
+        (status = StatusCode::INTERNAL_SERVER_ERROR, description = "Could not read /data/rayhunter/rayhunter.log file")
+    ),
+    summary = "Display log",
+    description = "Download the current device log in UTF-8 plaintext."
+))]
 pub async fn get_log() -> Result<String, (StatusCode, String)> {
     tokio::fs::read_to_string("/data/rayhunter/rayhunter.log")
         .await

daemon/src/update.rs

@@ -0,0 +1,274 @@
+use chrono::{DateTime, Local};
+use log::{error, info, warn};
+use serde::{Deserialize, Serialize};
+use std::sync::Arc;
+use tokio::select;
+use tokio::sync::{RwLock, mpsc::Sender};
+use tokio::time;
+use tokio::time::{Duration, MissedTickBehavior};
+use tokio_util::{sync::CancellationToken, task::TaskTracker};
+
+use crate::notifications::{Notification, NotificationType};
+
+const UPDATE_CHECK_INTERVAL: Duration = Duration::from_secs(6 * 60 * 60);
+const GITHUB_LATEST_RELEASE_URL: &str =
+    "https://api.github.com/repos/EFForg/rayhunter/releases/latest";
+
+#[derive(Debug, Clone, Serialize)]
+#[cfg_attr(feature = "apidocs", derive(utoipa::ToSchema))]
+pub struct UpdateStatus {
+    pub current_version: String,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub latest_version: Option<String>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub latest_release_url: Option<String>,
+    pub update_available: bool,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    #[cfg_attr(feature = "apidocs", schema(value_type = Option<String>, format = "date-time"))]
+    pub last_checked: Option<DateTime<Local>>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub last_error: Option<String>,
+}
+
+impl Default for UpdateStatus {
+    fn default() -> Self {
+        Self {
+            current_version: get_current_version(),
+            // To-be-populated by update check worker
+            latest_version: None,
+            latest_release_url: None,
+            update_available: false,
+            last_checked: None,
+            last_error: None,
+        }
+    }
+}
+
+#[derive(Debug, Deserialize)]
+struct GitHubReleaseResponse {
+    tag_name: String,
+    html_url: String,
+}
+
+#[derive(Debug, Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
+struct VersionParts {
+    major: u64,
+    minor: u64,
+    patch: u64,
+}
+
+fn get_current_version() -> String {
+    // See https://doc.rust-lang.org/cargo/reference/environment-variables.html#environment-variables-cargo-sets-for-crates
+    env!("CARGO_PKG_VERSION").to_owned()
+}
+
+fn parse_release_tagname(version: &str) -> Option<(VersionParts, String)> {
+    // Trim whitespace and leading `v`, if any
+    let trimmed_version = version.trim().trim_start_matches('v');
+    let mut parts = trimmed_version.split('.');
+
+    // Fail on versions with pre-release metadata: https://github.com/EFForg/rayhunter/pull/1054#issuecomment-4528407281
+    let major = parts.next()?.parse::<u64>().ok()?;
+    let minor = parts.next()?.parse::<u64>().ok()?;
+    let patch = parts.next()?.parse::<u64>().ok()?;
+    // Expect only major.minor.patch format
+    if parts.next().is_some() {
+        return None;
+    }
+
+    let version = format!("{}.{}.{}", major, minor, patch);
+    Some((
+        VersionParts {
+            major,
+            minor,
+            patch,
+        },
+        version.to_string(),
+    ))
+}
+
+fn format_update_message(current_version: &str, latest_version: &str, release_url: &str) -> String {
+    format!(
+        "Rayhunter {current_version} is installed, but {latest_version} is available. Open {release_url} to download the update."
+    )
+}
+
+async fn refresh_update_status(
+    status_lock: &Arc<RwLock<UpdateStatus>>,
+    http_client: &reqwest::Client,
+) -> Result<Option<(String, String)>, String> {
+    let response = http_client
+        .get(GITHUB_LATEST_RELEASE_URL)
+        .timeout(Duration::from_secs(5))
+        .header(reqwest::header::USER_AGENT, "rayhunter-update-checker")
+        .send()
+        .await
+        .map_err(|err| format!("failed to query GitHub releases: {err}"))?;
+
+    if !response.status().is_success() {
+        return Err(format!(
+            "GitHub release check returned {}",
+            response.status()
+        ));
+    }
+
+    let response_text = response
+        .text()
+        .await
+        .map_err(|err| format!("failed to read GitHub release response: {err}"))?;
+    let release: GitHubReleaseResponse = serde_json::from_str(&response_text)
+        .map_err(|err| format!("failed to parse GitHub release response: {err}"))?;
+
+    let current_version = get_current_version();
+    let (current_version_parts, current_version) = parse_release_tagname(&current_version)
+        .ok_or_else(|| format!("failed to parse current version {current_version}"))?;
+    let (latest_version_parts, latest_version) = parse_release_tagname(&release.tag_name)
+        .ok_or_else(|| {
+            format!(
+                "failed to parse latest release version {}",
+                release.tag_name
+            )
+        })?;
+
+    let update_available = latest_version_parts > current_version_parts;
+    {
+        let mut status = status_lock.write().await;
+        status.current_version = current_version;
+        status.latest_version = Some(latest_version.to_owned());
+        status.latest_release_url = Some(release.html_url.to_owned());
+        status.update_available = update_available;
+        status.last_checked = Some(Local::now());
+        status.last_error = None;
+    }
+
+    if update_available {
+        Ok(Some((latest_version, release.html_url)))
+    } else {
+        Ok(None)
+    }
+}
+
+pub fn run_update_check_worker(
+    task_tracker: &TaskTracker,
+    shutdown_token: CancellationToken,
+    update_status_lock: Arc<RwLock<UpdateStatus>>,
+    notification_sender: Sender<Notification>,
+    enabled_notifications: Vec<NotificationType>,
+) {
+    task_tracker.spawn(async move {
+        let http_client = match reqwest::Client::builder().build() {
+            Ok(client) => client,
+            Err(err) => {
+                error!("failed to create update check client: {err}");
+                return;
+            }
+        };
+        let mut interval = time::interval(UPDATE_CHECK_INTERVAL);
+        interval.set_missed_tick_behavior(MissedTickBehavior::Skip);
+
+        // Keep track of last notified version
+        let mut last_notified_version: Option<String> = None;
+
+        loop {
+            if shutdown_token.is_cancelled() {
+                break;
+            }
+
+            match refresh_update_status(&update_status_lock, &http_client).await {
+                Ok(Some((latest_version, latest_release_url))) => {
+                    if last_notified_version.as_deref() != Some(latest_version.as_str()) {
+                        let current_version =
+                            update_status_lock.read().await.current_version.clone();
+                        let message = format_update_message(
+                            &current_version,
+                            &latest_version,
+                            &latest_release_url,
+                        );
+                        if enabled_notifications.contains(&NotificationType::Update) {
+                            if let Err(err) = notification_sender
+                                .send(Notification::new(NotificationType::Update, message, None))
+                                .await
+                            {
+                                error!("failed to enqueue update notification: {err}");
+                            } else {
+                                info!("notified about Rayhunter update {latest_version}");
+                            }
+                        }
+                        last_notified_version = Some(latest_version);
+                    }
+                }
+                Ok(None) => {
+                    last_notified_version = None;
+                }
+                Err(err) => {
+                    warn!("update check failed: {err}");
+                    let mut status = update_status_lock.write().await;
+                    status.last_error = Some(err);
+                    status.last_checked = Some(Local::now());
+                }
+            }
+
+            select! {
+                _ = shutdown_token.cancelled() => break,
+                _ = interval.tick() => {}
+            }
+        }
+    });
+}
+
+#[cfg(test)]
+mod tests {
+    use super::parse_release_tagname;
+
+    #[test]
+    fn parses_simple_versions() {
+        let (parts, version) = parse_release_tagname("0.11.1").unwrap();
+        assert_eq!(parts.major, 0);
+        assert_eq!(parts.minor, 11);
+        assert_eq!(parts.patch, 1);
+        assert_eq!(version, "0.11.1");
+    }
+
+    #[test]
+    fn returns_none_for_invalid_versions() {
+        assert!(parse_release_tagname("invalid").is_none());
+        assert!(parse_release_tagname("v1.2").is_none());
+        assert!(parse_release_tagname("v1.2.x").is_none());
+        assert!(parse_release_tagname("v1.2.3.4").is_none());
+        assert!(parse_release_tagname("v1.2.-3").is_none());
+        assert!(parse_release_tagname("v1.2.3-beta").is_none());
+        assert!(parse_release_tagname("v1.2.3-beta.1").is_none());
+        assert!(parse_release_tagname("1.2").is_none());
+        assert!(parse_release_tagname("1.2.x").is_none());
+        assert!(parse_release_tagname("1.2.3.4").is_none());
+        assert!(parse_release_tagname("1.2.-3").is_none());
+        assert!(parse_release_tagname("1.2.3-beta").is_none());
+        assert!(parse_release_tagname("1.2.3-beta.1").is_none());
+    }
+
+    #[test]
+    fn compares_versions_numerically() {
+        let (newer_version_parts, newer_version) = parse_release_tagname("v0.11.2").unwrap();
+        let (older_version_parts, older_version) = parse_release_tagname("v0.11.1").unwrap();
+        assert!(newer_version_parts > older_version_parts);
+        assert_eq!(newer_version, "0.11.2");
+        assert_eq!(older_version, "0.11.1");
+    }
+
+    #[test]
+    fn compares_major_minor_patch_correctly() {
+        let (v1_parts, v1) = parse_release_tagname("v1.0.0").unwrap();
+        let (v2_parts, v2) = parse_release_tagname("v1.0.1").unwrap();
+        let (v3_parts, v3) = parse_release_tagname("v1.1.0").unwrap();
+        let (v4_parts, v4) = parse_release_tagname("v2.0.0").unwrap();
+
+        assert!(v2_parts > v1_parts);
+        assert!(v3_parts > v2_parts);
+        assert!(v4_parts > v3_parts);
+
+        assert_eq!(v1, "1.0.0");
+        assert_eq!(v2, "1.0.1");
+        assert_eq!(v3, "1.1.0");
+        assert_eq!(v4, "2.0.0");
+    }
+}

daemon/src/webdav.rs

@@ -0,0 +1,424 @@
+use std::{sync::Arc, time::Duration};
+
+use chrono::TimeDelta;
+use futures::future::join_all;
+use log::{info, warn};
+use reqwest::header::{CONTENT_LENGTH, CONTENT_TYPE};
+use reqwest::{Body, Client, Response};
+use tokio::fs::File;
+use tokio::{select, sync::RwLock, time};
+use tokio_util::io::ReaderStream;
+use tokio_util::{sync::CancellationToken, task::TaskTracker};
+
+use crate::config::WebdavConfig;
+use crate::qmdl_store::{FileKind, RecordingStore};
+
+pub struct WebdavUploadWorkerConfig {
+    poll_interval: Duration,
+    min_age: TimeDelta,
+    url: String,
+    username: Option<String>,
+    password: Option<String>,
+    timeout: Duration,
+    delete_on_upload: bool,
+}
+
+impl From<WebdavConfig> for WebdavUploadWorkerConfig {
+    fn from(value: WebdavConfig) -> Self {
+        WebdavUploadWorkerConfig {
+            poll_interval: Duration::from_secs(value.poll_interval_secs),
+            min_age: TimeDelta::seconds(value.min_age_secs),
+            url: value.url,
+            username: value.username,
+            password: value.password,
+            timeout: Duration::from_secs(value.upload_timeout_secs),
+            delete_on_upload: value.delete_on_upload,
+        }
+    }
+}
+
+#[derive(Debug, Clone)]
+struct WebDavClient {
+    client: Client,
+    url: String,
+    username: Option<String>,
+    password: Option<String>,
+}
+
+impl WebDavClient {
+    fn new(
+        mut url: String,
+        username: Option<String>,
+        password: Option<String>,
+        timeout: Duration,
+    ) -> Result<Self, reqwest::Error> {
+        if !url.ends_with('/') {
+            url.push('/');
+        }
+        Ok(Self {
+            client: reqwest::Client::builder().timeout(timeout).build()?,
+            url,
+            username,
+            password,
+        })
+    }
+
+    async fn try_upload_file(&self, file: File, name: &str) -> anyhow::Result<Response> {
+        let file_size = file.metadata().await?.len();
+
+        let stream = ReaderStream::new(file);
+        let body = Body::wrap_stream(stream);
+
+        let target = format!("{}{}", self.url, name);
+
+        let client = self
+            .client
+            .put(&target)
+            .header(CONTENT_TYPE, "application/octet-stream")
+            .header(CONTENT_LENGTH, file_size);
+
+        let client = match (&self.username, &self.password) {
+            (Some(username), Some(password)) => client.basic_auth(username, Some(password)),
+            (Some(username), None) => client.basic_auth(username, None::<&str>),
+            (None, None) => client,
+            (None, Some(_)) => {
+                warn!(
+                    "Got WebDAV auth setting with no username but with a password, skipping authentication"
+                );
+                client
+            }
+        };
+
+        let resp = client.body(body).send().await?.error_for_status();
+        Ok(resp?)
+    }
+}
+
+async fn try_upload_entry(
+    client: WebDavClient,
+    store: Arc<RwLock<RecordingStore>>,
+    entry_name: String,
+    file_kind: FileKind,
+    shutdown_token: CancellationToken,
+) -> Option<()> {
+    let read_lock = store.read().await;
+    let entry_idx = read_lock.entry_for_name(&entry_name)?.0;
+    let file = read_lock.open_file(entry_idx, file_kind).await;
+    drop(read_lock);
+
+    let file = match file {
+        Ok(Some(f)) => f,
+        Ok(None) => return Some(()), // File doesn't exist (e.g., GPS for old recordings)
+        Err(err) => {
+            warn!(
+                "Unable to open entry: {} {} file: {:?}",
+                entry_name, file_kind, err
+            );
+            return None;
+        }
+    };
+
+    let file_name = file_kind.get_filename(&entry_name);
+
+    let res = select! {
+        _ = shutdown_token.cancelled() => {
+            warn!(
+                "Cancelling upload for entry {} {} file: received shutdown signal",
+                entry_name, file_kind
+            );
+            return None;
+        },
+        res = client.try_upload_file(file, &file_name) => res,
+    };
+
+    match res {
+        Ok(_) => {
+            info!("Uploaded {} file for entry {}", file_kind, entry_name);
+            Some(())
+        }
+        Err(err) => {
+            warn!(
+                "Failed to upload {} file for entry {}: {:?}",
+                file_kind, entry_name, err
+            );
+            None
+        }
+    }
+}
+
+pub fn run_webdav_upload_worker(
+    task_tracker: &TaskTracker,
+    shutdown_token: CancellationToken,
+    qmdl_store_lock: Arc<RwLock<RecordingStore>>,
+    config: WebdavUploadWorkerConfig,
+) {
+    task_tracker.spawn(async move {
+        let mut interval = time::interval(config.poll_interval);
+        interval.set_missed_tick_behavior(time::MissedTickBehavior::Skip);
+
+        let webdav_client = match WebDavClient::new(
+            config.url,
+            config.username,
+            config.password,
+            config.timeout,
+        ) {
+            Ok(client) => client,
+            Err(err) => {
+                warn!("Unable to create WebDAV client: {:?}", err);
+                return;
+            }
+        };
+
+        loop {
+            select! {
+                _ = shutdown_token.cancelled() => break,
+                _ = interval.tick() => {
+                    loop {
+                        let Some(unuploaded_entry) = qmdl_store_lock
+                            .read()
+                            .await
+                            .get_next_unuploaded_entry(config.min_age) else {
+                                break;
+                            };
+
+                        let upload_futures: Vec<_> = FileKind::ALL
+                            .iter()
+                            .map(|&file_kind| {
+                                try_upload_entry(
+                                    webdav_client.clone(),
+                                    qmdl_store_lock.clone(),
+                                    unuploaded_entry.clone(),
+                                    file_kind,
+                                    shutdown_token.clone(),
+                                )
+                            })
+                            .collect();
+
+                        let results = join_all(upload_futures).await;
+                        if !results.iter().all(|r| r.is_some()) {
+                            break;
+                        }
+
+                        if config.delete_on_upload {
+                            match qmdl_store_lock.write().await.delete_entry(&unuploaded_entry).await {
+                                Ok(_) => info!("Successfully deleted entry: {} after upload to WebDAV", unuploaded_entry),
+                                Err(err) => warn!("Unable to delete entry: {} after upload to WebDAV: {}", unuploaded_entry, err),
+                            }
+                        } else {
+                            match qmdl_store_lock.write().await.mark_entry_as_uploaded(&unuploaded_entry, rayhunter::clock::get_adjusted_now()).await {
+                                Ok(_) => info!("Successfully marked entry: {} as uploaded", unuploaded_entry),
+                                Err(err) => warn!("Unable to mark entry: {} as uploaded: {}", unuploaded_entry, err),
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    });
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use crate::config::GpsMode;
+    use axum::{
+        Router,
+        body::Bytes,
+        extract::{Path as AxumPath, State},
+        http::{HeaderMap, StatusCode},
+        routing::put,
+    };
+    use tempfile::Builder;
+    use tokio::io::AsyncWriteExt;
+    use tokio::net::TcpListener;
+    use tokio::sync::Mutex;
+
+    #[derive(Clone, Debug)]
+    struct RecordedPut {
+        path: String,
+        auth: Option<String>,
+        body: Vec<u8>,
+    }
+
+    async fn capture_put(
+        State(state): State<Arc<Mutex<Vec<RecordedPut>>>>,
+        AxumPath(path): AxumPath<String>,
+        headers: HeaderMap,
+        body: Bytes,
+    ) -> StatusCode {
+        let auth = headers
+            .get("authorization")
+            .and_then(|v| v.to_str().ok())
+            .map(String::from);
+        state.lock().await.push(RecordedPut {
+            path,
+            auth,
+            body: body.to_vec(),
+        });
+        StatusCode::CREATED
+    }
+
+    async fn setup_webdav_server() -> (Arc<Mutex<Vec<RecordedPut>>>, String) {
+        crate::crypto_provider::install_default();
+
+        let state = Arc::new(Mutex::new(Vec::new()));
+        let app = Router::new()
+            .route("/{*path}", put(capture_put))
+            .with_state(state.clone());
+
+        let listener = TcpListener::bind("127.0.0.1:0").await.unwrap();
+        let addr = listener.local_addr().unwrap();
+        let url = format!("http://{}/dav", addr);
+
+        tokio::spawn(async move {
+            axum::serve(listener, app).await.unwrap();
+        });
+
+        tokio::time::sleep(Duration::from_millis(100)).await;
+
+        (state, url)
+    }
+
+    async fn cleanup_worker(shutdown: CancellationToken, tracker: TaskTracker) {
+        shutdown.cancel();
+        tracker.close();
+        tracker.wait().await;
+    }
+
+    async fn make_store_with_closed_entry(
+        dir: &std::path::Path,
+    ) -> (Arc<RwLock<RecordingStore>>, String) {
+        let mut store = RecordingStore::create(dir).await.unwrap();
+        let (mut qmdl_file, mut analysis_file) = store.new_entry(GpsMode::Disabled).await.unwrap();
+        qmdl_file.write_all(b"fake qmdl payload").await.unwrap();
+        qmdl_file.flush().await.unwrap();
+        analysis_file
+            .write_all(b"fake ndjson payload")
+            .await
+            .unwrap();
+        analysis_file.flush().await.unwrap();
+        let entry_index = store.current_entry.unwrap();
+        let name = store.manifest.entries[entry_index].name.clone();
+        store.update_entry_qmdl_size(entry_index, 17).await.unwrap();
+        store.close_current_entry().await.unwrap();
+        (Arc::new(RwLock::new(store)), name)
+    }
+
+    #[tokio::test]
+    async fn test_webdav_upload_worker_uploads_entry() {
+        let (captured, url) = setup_webdav_server().await;
+
+        let dir = Builder::new().prefix("webdav_test").tempdir().unwrap();
+        let (store, entry_name) = make_store_with_closed_entry(dir.path()).await;
+
+        let shutdown = CancellationToken::new();
+        let tracker = TaskTracker::new();
+        let config = WebdavUploadWorkerConfig {
+            poll_interval: Duration::from_millis(50),
+            min_age: TimeDelta::seconds(-1),
+            url,
+            username: Some("user".to_string()),
+            password: Some("password".to_string()),
+            timeout: Duration::from_secs(1),
+            delete_on_upload: false,
+        };
+
+        run_webdav_upload_worker(&tracker, shutdown.clone(), store.clone(), config);
+
+        tokio::time::sleep(Duration::from_millis(500)).await;
+        cleanup_worker(shutdown, tracker).await;
+
+        let recorded = captured.lock().await;
+        assert_eq!(recorded.len(), 3);
+        let paths: Vec<&str> = recorded.iter().map(|r| r.path.as_str()).collect();
+        let qmdl_path = format!("dav/{}.qmdl", entry_name);
+        let ndjson_path = format!("dav/{}.ndjson", entry_name);
+        let gps_path = format!("dav/{}-gps.ndjson", entry_name);
+        assert!(paths.contains(&qmdl_path.as_str()));
+        assert!(paths.contains(&ndjson_path.as_str()));
+        assert!(paths.contains(&gps_path.as_str()));
+        for put in recorded.iter() {
+            assert_eq!(put.auth.as_deref(), Some("Basic dXNlcjpwYXNzd29yZA=="));
+        }
+        let qmdl_body = recorded
+            .iter()
+            .find(|r| r.path == qmdl_path)
+            .unwrap()
+            .body
+            .clone();
+        let ndjson_body = recorded
+            .iter()
+            .find(|r| r.path == ndjson_path)
+            .unwrap()
+            .body
+            .clone();
+        drop(recorded);
+        assert_eq!(qmdl_body, b"fake qmdl payload");
+        assert_eq!(ndjson_body, b"fake ndjson payload");
+
+        let store_read = store.read().await;
+        let (_, entry) = store_read.entry_for_name(&entry_name).unwrap();
+        assert!(entry.upload_time.is_some());
+    }
+
+    #[tokio::test]
+    async fn test_webdav_upload_worker_deletes_when_configured() {
+        let (captured, url) = setup_webdav_server().await;
+
+        let dir = Builder::new().prefix("webdav_test").tempdir().unwrap();
+        let (store, entry_name) = make_store_with_closed_entry(dir.path()).await;
+
+        let shutdown = CancellationToken::new();
+        let tracker = TaskTracker::new();
+        let config = WebdavUploadWorkerConfig {
+            poll_interval: Duration::from_millis(50),
+            min_age: TimeDelta::seconds(-1),
+            url,
+            username: None,
+            password: None,
+            timeout: Duration::from_secs(1),
+            delete_on_upload: true,
+        };
+
+        run_webdav_upload_worker(&tracker, shutdown.clone(), store.clone(), config);
+
+        tokio::time::sleep(Duration::from_millis(500)).await;
+        cleanup_worker(shutdown, tracker).await;
+
+        assert_eq!(captured.lock().await.len(), 3);
+
+        let store_read = store.read().await;
+        assert!(store_read.entry_for_name(&entry_name).is_none());
+    }
+
+    #[tokio::test]
+    async fn test_webdav_upload_worker_respects_min_age() {
+        let (captured, url) = setup_webdav_server().await;
+
+        let dir = Builder::new().prefix("webdav_test").tempdir().unwrap();
+        let (store, entry_name) = make_store_with_closed_entry(dir.path()).await;
+
+        let shutdown = CancellationToken::new();
+        let tracker = TaskTracker::new();
+        let config = WebdavUploadWorkerConfig {
+            poll_interval: Duration::from_millis(50),
+            min_age: TimeDelta::seconds(3600),
+            url,
+            username: None,
+            password: None,
+            timeout: Duration::from_secs(1),
+            delete_on_upload: false,
+        };
+
+        run_webdav_upload_worker(&tracker, shutdown.clone(), store.clone(), config);
+
+        tokio::time::sleep(Duration::from_millis(500)).await;
+        cleanup_worker(shutdown, tracker).await;
+
+        assert!(captured.lock().await.is_empty());
+
+        let store_read = store.read().await;
+        let (_, entry) = store_read.entry_for_name(&entry_name).unwrap();
+        assert!(entry.upload_time.is_none());
+    }
+}

daemon/tests/smoke.rs

@@ -0,0 +1,185 @@
+use std::io::Read;
+use std::net::{TcpListener, TcpStream};
+use std::process::{Child, Command, ExitStatus, Stdio};
+use std::sync::{Arc, Mutex};
+use std::time::{Duration, Instant};
+
+use tempfile::TempDir;
+
+const STARTUP_TIMEOUT: Duration = Duration::from_secs(5);
+const REQUEST_TIMEOUT: Duration = Duration::from_secs(5);
+const SHUTDOWN_TIMEOUT: Duration = Duration::from_secs(5);
+
+struct DaemonGuard {
+    child: Option<Child>,
+    stderr: Arc<Mutex<Vec<u8>>>,
+}
+
+impl DaemonGuard {
+    fn stderr_dump(&self) -> String {
+        let buf = self.stderr.lock().unwrap();
+        String::from_utf8_lossy(&buf).into_owned()
+    }
+
+    fn shutdown(&mut self, timeout: Duration) -> std::io::Result<ExitStatus> {
+        let mut child = self
+            .child
+            .take()
+            .expect("daemon already shut down or never started");
+
+        #[cfg(unix)]
+        {
+            let pid = child.id() as libc::pid_t;
+            // SAFETY: child.id() returns the OS pid of a process we own.
+            unsafe { libc::kill(pid, libc::SIGINT) };
+        }
+        #[cfg(not(unix))]
+        {
+            let _ = child.kill();
+        }
+
+        let start = Instant::now();
+        loop {
+            match child.try_wait()? {
+                Some(status) => return Ok(status),
+                None => {
+                    if start.elapsed() >= timeout {
+                        let _ = child.kill();
+                        return child.wait();
+                    }
+                    std::thread::sleep(Duration::from_millis(50));
+                }
+            }
+        }
+    }
+}
+
+impl Drop for DaemonGuard {
+    fn drop(&mut self) {
+        if let Some(mut child) = self.child.take() {
+            let _ = child.kill();
+            let _ = child.wait();
+        }
+    }
+}
+
+fn pick_free_port() -> u16 {
+    let listener = TcpListener::bind("127.0.0.1:0").expect("bind ephemeral port");
+    listener.local_addr().expect("local_addr").port()
+}
+
+fn wait_for_port(port: u16, timeout: Duration) -> bool {
+    let start = Instant::now();
+    while start.elapsed() < timeout {
+        if TcpStream::connect(("127.0.0.1", port)).is_ok() {
+            return true;
+        }
+        std::thread::sleep(Duration::from_millis(100));
+    }
+    false
+}
+
+#[tokio::test(flavor = "current_thread")]
+async fn daemon_serves_index_and_api() {
+    let port = pick_free_port();
+
+    let tmp = TempDir::new().unwrap();
+    let qmdl_dir = tmp.path().join("qmdl");
+    std::fs::create_dir(&qmdl_dir).unwrap();
+    // The daemon refuses to create a store in debug_mode, so seed an empty
+    // manifest. See init_qmdl_store in daemon/src/main.rs.
+    std::fs::write(qmdl_dir.join("manifest.toml"), "entries = []\n").unwrap();
+
+    let config_path = tmp.path().join("config.toml");
+    std::fs::write(
+        &config_path,
+        format!(
+            "qmdl_store_path = \"{}\"\nport = {}\ndebug_mode = true\n",
+            qmdl_dir.display(),
+            port,
+        ),
+    )
+    .unwrap();
+
+    let daemon_bin = env!("CARGO_BIN_EXE_rayhunter-daemon");
+    let mut child = Command::new(daemon_bin)
+        .arg(&config_path)
+        .stdout(Stdio::null())
+        .stderr(Stdio::piped())
+        .spawn()
+        .expect("failed to spawn daemon");
+
+    let stderr_buf: Arc<Mutex<Vec<u8>>> = Arc::new(Mutex::new(Vec::new()));
+    if let Some(mut pipe) = child.stderr.take() {
+        let sink = stderr_buf.clone();
+        std::thread::spawn(move || {
+            let mut chunk = [0u8; 4096];
+            loop {
+                match pipe.read(&mut chunk) {
+                    Ok(0) | Err(_) => break,
+                    Ok(n) => sink.lock().unwrap().extend_from_slice(&chunk[..n]),
+                }
+            }
+        });
+    }
+
+    let mut guard = DaemonGuard {
+        child: Some(child),
+        stderr: stderr_buf,
+    };
+
+    if !wait_for_port(port, STARTUP_TIMEOUT) {
+        panic!(
+            "daemon did not start listening on {port} within {STARTUP_TIMEOUT:?}\n--- daemon stderr ---\n{}",
+            guard.stderr_dump(),
+        );
+    }
+
+    // reqwest's rustls backend gets pulled in via feature unification with the
+    // daemon's production deps. The test process needs its own crypto provider.
+    rayhunter_daemon::crypto_provider::install_default();
+
+    let client = reqwest::Client::builder()
+        .timeout(REQUEST_TIMEOUT)
+        .gzip(true)
+        .build()
+        .unwrap();
+    let base = format!("http://127.0.0.1:{port}");
+
+    let resp = client
+        .get(format!("{base}/index.html"))
+        .send()
+        .await
+        .expect("GET /index.html failed");
+    assert!(
+        resp.status().is_success(),
+        "GET /index.html returned {}",
+        resp.status(),
+    );
+    let body = resp.text().await.expect("could not read index.html body");
+    assert!(
+        body.contains("Rayhunter"),
+        "decompressed index.html body did not contain 'Rayhunter' marker (len={})",
+        body.len(),
+    );
+
+    let resp = client
+        .get(format!("{base}/api/qmdl-manifest"))
+        .send()
+        .await
+        .expect("GET /api/qmdl-manifest failed");
+    assert!(
+        resp.status().is_success(),
+        "GET /api/qmdl-manifest returned {}",
+        resp.status(),
+    );
+
+    let status = guard
+        .shutdown(SHUTDOWN_TIMEOUT)
+        .expect("waiting for daemon exit failed");
+    assert!(
+        status.success(),
+        "daemon did not exit cleanly after SIGINT: {status}\n--- daemon stderr ---\n{}",
+        guard.stderr_dump(),
+    );
+}

daemon/web/eslint.config.js

@@ -22,7 +22,7 @@ export default ts.config(
         },
     },
     {
-        files: ['**/*.svelte'],
+        files: ['**/*.svelte', '**/*.svelte.ts', '**/*.svelte.js'],
 
         languageOptions: {
             parserOptions: {
@@ -37,6 +37,22 @@ export default ts.config(
                 { argsIgnorePattern: '^_', varsIgnorePattern: '^_' },
             ],
             '@typescript-eslint/no-explicit-any': 'off',
+            '@typescript-eslint/naming-convention': [
+                'error',
+                {
+                    selector: 'function',
+                    format: ['snake_case'],
+                },
+                {
+                    selector: 'method',
+                    format: ['snake_case'],
+                },
+            ],
+            // these rules should eventually be enabled, just disabled them to
+            // make dependency upgrades easier.
+            'svelte/prefer-svelte-reactivity': 'off',
+            'svelte/require-each-key': 'off',
+            'svelte/no-navigation-without-resolve': 'off',
         },
     }
 );

daemon/web/package.json

@@ -15,25 +15,26 @@
         "fix": "eslint --fix ."
     },
     "devDependencies": {
-        "@sveltejs/adapter-auto": "^3.0.0",
+        "@eslint/js": "^10.0.1",
+        "@sveltejs/adapter-auto": "^7.0.1",
         "@sveltejs/adapter-static": "^3.0.5",
-        "@sveltejs/kit": "^2.13.0",
-        "@sveltejs/vite-plugin-svelte": "^6.2.1",
+        "@sveltejs/kit": "^2.60.1",
+        "@sveltejs/vite-plugin-svelte": "^7.0.0",
+        "@tailwindcss/vite": "^4.2.2",
         "@types/eslint": "^9.6.0",
-        "@types/node": "^24.7.0",
-        "autoprefixer": "^10.4.20",
-        "eslint": "^9.7.0",
-        "eslint-config-prettier": "^9.1.0",
-        "eslint-plugin-svelte": "^2.36.0",
-        "globals": "^15.0.0",
-        "prettier": "^3.3.2",
-        "prettier-plugin-svelte": "^3.2.6",
-        "svelte": "^5.0.0",
-        "svelte-check": "^4.0.0",
-        "tailwindcss": "^3.4.9",
-        "typescript": "^5.0.0",
-        "typescript-eslint": "^8.0.0",
-        "vite": "^7.1.11",
-        "vitest": "^3.2.4"
+        "@types/node": "^25.6.0",
+        "eslint": "^10.2.1",
+        "eslint-config-prettier": "^10.1.8",
+        "eslint-plugin-svelte": "^3.17.1",
+        "globals": "^17.5.0",
+        "prettier": "^3.8.3",
+        "prettier-plugin-svelte": "^3.5.1",
+        "svelte": "^5.55.7",
+        "svelte-check": "^4.4.6",
+        "tailwindcss": "^4.2.2",
+        "typescript": "^6.0.3",
+        "typescript-eslint": "^8.59.0",
+        "vite": "^8.0.10",
+        "vitest": "^4.1.5"
     }
 }

daemon/web/postcss.config.js

@@ -1,6 +0,0 @@
-export default {
-    plugins: {
-        tailwindcss: {},
-        autoprefixer: {},
-    },
-};

daemon/web/src/app.css

@@ -1,3 +1,16 @@
-@import 'tailwindcss/base';
-@import 'tailwindcss/components';
-@import 'tailwindcss/utilities';
+@import 'tailwindcss';
+
+@theme {
+    --color-rayhunter-blue: #4e4eb1;
+    --color-rayhunter-dark-blue: #3f3da0;
+    --color-rayhunter-green: #94ea18;
+}
+
+/* v4 dropped the v3 preflight rule that set `cursor: pointer` on buttons.
+ * Restore it so enabled buttons get the pointer cursor. */
+@layer base {
+    button:not(:disabled),
+    [role='button']:not(:disabled) {
+        cursor: pointer;
+    }
+}

daemon/web/src/lib/components/ActionErrors.svelte

@@ -20,7 +20,7 @@
 
 {#if action_errors.length > 0}
     <div
-        class="bg-red-100 border-red-100 drop-shadow p-4 flex flex-col gap-2
+        class="bg-red-100 border-red-100 drop-shadow-sm p-4 flex flex-col gap-2
         border rounded-md flex-1 justify-between fixed z-10 right-3 bottom-3 ml-3"
     >
         <div class="flex flex-row justify-between">

daemon/web/src/lib/components/AnalysisTable.svelte

@@ -11,7 +11,7 @@
         dateStyle: 'short',
     });
 
-    const analyzers = report.metadata.analyzers;
+    const analyzers = $derived(report.metadata.analyzers);
 
     const skipped_messages: Map<string, number> = $derived.by(() => {
         let map = new Map();
@@ -78,7 +78,8 @@
         <p class="text-lg underline">Unparsed Messages</p>
         <p>
             These are due to a limitation or bug in Rayhunter's parser, and aren't usually a
-            problem.
+            problem. We'll not accept bug reports about them unless something else is going wrong
+            (such as false-positives or definite false-negatives)
         </p>
         <div class="overflow-x-auto">
             <table class="table-auto text-left">

daemon/web/src/lib/components/AnalysisView.svelte

@@ -1,6 +1,7 @@
 <script lang="ts">
     import { type ReportMetadata } from '$lib/analysis.svelte';
     import type { ManifestEntry } from '$lib/manifest.svelte';
+    import { gps_mode_label } from '$lib/utils.svelte';
     import { AnalysisManager } from '$lib/analysisManager.svelte';
     import AnalysisTable from './AnalysisTable.svelte';
     import ReAnalyzeButton from './ReAnalyzeButton.svelte';
@@ -13,6 +14,11 @@
         manager: AnalysisManager;
         current: boolean;
     } = $props();
+
+    const date_formatter = new Intl.DateTimeFormat(undefined, {
+        timeStyle: 'long',
+        dateStyle: 'short',
+    });
 </script>
 
 <div class="container mt-2">
@@ -22,10 +28,26 @@
         <p>Error getting analysis report: {entry.analysis_report}</p>
     {:else}
         {@const metadata: ReportMetadata = entry.analysis_report.metadata}
+        {@const numWarnings: number = entry.get_num_warnings() || 0}
         <div class="flex flex-col gap-2">
-            {#if !current}
-                <div class="flex flex-row justify-end items-center">
-                    <ReAnalyzeButton {entry} {manager} />
+            {#if !!numWarnings || !current}
+                <div class="flex flex-row justify-between items-center">
+                    {#if !!numWarnings}
+                        <div
+                            class="text-red-700 border-red-500 border rounded-lg text-blue-600 px-2 py-1 mr-12"
+                        >
+                            Your Rayhunter device raised {`${numWarnings}`} warning{`${
+                                numWarnings > 1 ? 's' : ''
+                            }`}!
+                            <a
+                                href="https://efforg.github.io/rayhunter/faq.html#red"
+                                class="text-blue-600 underline">Read the FAQ</a
+                            > to learn what you can do about it
+                        </div>
+                    {/if}
+                    {#if !current}
+                        <ReAnalyzeButton {entry} {manager} />
+                    {/if}
                 </div>
             {/if}
             {#if entry.analysis_report.rows.length > 0}
@@ -33,20 +55,34 @@
             {:else}
                 <p>No warnings to display!</p>
             {/if}
-            {#if metadata !== undefined && metadata.rayhunter !== undefined}
-                <div>
-                    <p class="text-lg underline">Metadata</p>
-                    <p>Analysis by Rayhunter version {metadata.rayhunter.rayhunter_version}</p>
+            <div>
+                <p class="text-lg underline">Metadata</p>
+                {#if metadata !== undefined && metadata.rayhunter !== undefined}
+                    <p><b>Rayhunter version:</b> {metadata.rayhunter.rayhunter_version}</p>
                     <p><b>Device system OS:</b> {metadata.rayhunter.system_os}</p>
-                </div>
+                {:else}
+                    <p>N/A (analysis generated by an older version of rayhunter)</p>
+                {/if}
+                {#if entry.upload_time}
+                    <p>
+                        <b>WebDAV uploaded at:</b>
+                        <span class="text-green-700"
+                            >{date_formatter.format(entry.upload_time)}</span
+                        >
+                    </p>
+                {/if}
+                <p>
+                    <b>GPS Mode:</b>
+                    {gps_mode_label(entry.gps_mode)}
+                </p>
+            </div>
+            {#if metadata && metadata.analyzers}
                 <div>
-                    <p class="text-lg underline">Analyzers</p>
+                    <p class="text-lg underline">Enabled Analyzers</p>
                     {#each metadata.analyzers as analyzer}
                         <p><b>{analyzer.name}:</b> {analyzer.description}</p>
                     {/each}
                 </div>
-            {:else}
-                <p>N/A (analysis generated by an older version of rayhunter)</p>
             {/if}
         </div>
     {/if}

daemon/web/src/lib/components/ApiRequestButton.svelte

@@ -12,6 +12,7 @@
         onclick,
         ariaLabel,
         errorMessage,
+        jsonBody,
     }: {
         url: string;
         method?: string;
@@ -23,6 +24,7 @@
         onclick?: () => void | Promise<void>;
         ariaLabel?: string;
         errorMessage?: string;
+        jsonBody?: unknown;
     } = $props();
 
     let is_requesting = $state(false);
@@ -43,7 +45,7 @@
         },
     };
 
-    async function handleClick() {
+    async function handle_click() {
         if (is_disabled) return;
 
         is_requesting = true;
@@ -51,7 +53,8 @@
             await user_action_req(
                 method,
                 url,
-                errorMessage ? errorMessage : 'Error performing action'
+                errorMessage ? errorMessage : 'Error performing action',
+                jsonBody
             );
             if (onclick) {
                 await onclick();
@@ -71,7 +74,7 @@
 
 <button
     class="text-white font-bold py-2 px-2 sm:px-4 rounded-md flex flex-row items-center gap-1 {buttonClasses}"
-    onclick={handleClick}
+    onclick={handle_click}
     disabled={is_disabled}
     aria-label={ariaLabel || label}
 >

daemon/web/src/lib/components/ClockDriftAlert.svelte

@@ -0,0 +1,121 @@
+<script lang="ts">
+    import { get_daemon_time } from '$lib/utils.svelte';
+    import ApiRequestButton from './ApiRequestButton.svelte';
+
+    let show_alert = $state(false);
+    let device_system_time = $state('');
+    let device_adjusted_time = $state('');
+    let browser_time = $state('');
+    let has_offset = $state(false);
+    let computed_offset = $state(0);
+    let dismissed = $state(false);
+    let check_completed = $state(false);
+
+    const DRIFT_THRESHOLD_SECONDS = 30;
+
+    function format_time(date: Date): string {
+        return date.toLocaleString();
+    }
+
+    async function check_clock_drift() {
+        if (check_completed) return;
+
+        try {
+            const daemon_time_response = await get_daemon_time();
+            const browser_now = new Date();
+            const daemon_system_ms = new Date(daemon_time_response.system_time).getTime();
+            const device_adjusted_ms = new Date(daemon_time_response.adjusted_time).getTime();
+            const drift_seconds = Math.round((browser_now.getTime() - device_adjusted_ms) / 1000);
+
+            if (Math.abs(drift_seconds) > DRIFT_THRESHOLD_SECONDS && !dismissed) {
+                device_system_time = format_time(new Date(daemon_time_response.system_time));
+                device_adjusted_time = format_time(new Date(daemon_time_response.adjusted_time));
+                browser_time = format_time(browser_now);
+                has_offset = daemon_time_response.offset_seconds !== 0;
+                // Calculate offset needed: browser_time - daemon_system_time
+                computed_offset = Math.round((browser_now.getTime() - daemon_system_ms) / 1000);
+                show_alert = true;
+            }
+        } catch (err) {
+            console.error('Failed to check clock drift:', err);
+        }
+        check_completed = true;
+    }
+
+    function dismiss() {
+        show_alert = false;
+        dismissed = true;
+    }
+
+    // Check clock drift on component mount
+    $effect(() => {
+        check_clock_drift();
+    });
+</script>
+
+{#if show_alert}
+    <div
+        class="bg-yellow-100 border-yellow-400 drop-shadow-sm p-4 flex flex-col gap-2 border rounded-md"
+    >
+        <span class="text-xl font-bold flex flex-row items-center gap-2 text-yellow-700">
+            <svg
+                class="w-6 h-6 text-yellow-600"
+                aria-hidden="true"
+                xmlns="http://www.w3.org/2000/svg"
+                width="24"
+                height="24"
+                fill="currentColor"
+                viewBox="0 0 24 24"
+            >
+                <path
+                    fill-rule="evenodd"
+                    d="M2 12C2 6.477 6.477 2 12 2s10 4.477 10 10-4.477 10-10 10S2 17.523 2 12Zm11-4a1 1 0 1 0-2 0v4a1 1 0 0 0 .293.707l3 3a1 1 0 0 0 1.414-1.414L13 11.586V8Z"
+                    clip-rule="evenodd"
+                />
+            </svg>
+            Clock Mismatch Detected
+        </span>
+        <p>
+            Rayhunter's clock doesn't match your browser's, and may be incorrect. This can happen if
+            Rayhunter is unable to get the correct time from the internet. Consider synchronizing
+            your browser's clock with the button below, or using another SIM card for better
+            results.
+        </p>
+        <table class="w-fit">
+            <tbody>
+                <tr>
+                    <td class="pr-2">Rayhunter clock (system):</td>
+                    <td class="font-mono">{device_system_time}</td>
+                </tr>
+                {#if has_offset}
+                    <tr>
+                        <td class="pr-2">Rayhunter clock (adjusted):</td>
+                        <td class="font-mono">{device_adjusted_time}</td>
+                    </tr>
+                {/if}
+                <tr>
+                    <td class="pr-2">Browser clock:</td>
+                    <td class="font-mono">{browser_time}</td>
+                </tr>
+            </tbody>
+        </table>
+        <p>Copy browser clock to device?</p>
+        <div class="flex flex-row gap-2 justify-end">
+            <button
+                class="font-medium py-2 px-4 rounded-md border border-gray-400 hover:bg-yellow-200"
+                onclick={dismiss}
+            >
+                Dismiss
+            </button>
+            <ApiRequestButton
+                url="/api/time-offset"
+                label="Sync Clock"
+                loadingLabel="Syncing..."
+                variant="green"
+                jsonBody={{ offset_seconds: computed_offset }}
+                onclick={dismiss}
+                errorMessage="Error syncing clock"
+            />
+        </div>
+    </div>
+{/if}

daemon/web/src/lib/components/ConfigForm.svelte

@@ -1,20 +1,43 @@
 <script lang="ts">
-    import { get_config, set_config, type Config } from '../utils.svelte';
+    import {
+        get_config,
+        set_config,
+        test_notification,
+        get_wifi_status,
+        scan_wifi_networks,
+        GpsMode,
+        enabled_notifications,
+        type Config,
+        type WifiStatus,
+        type WifiNetwork,
+    } from '../utils.svelte';
+    import Modal from './Modal.svelte';
+    import ExpandableInput from './ExpandableInput.svelte';
 
+    let { shown = $bindable() }: { shown: boolean } = $props();
     let config = $state<Config | null>(null);
 
     let loading = $state(false);
     let saving = $state(false);
+    let testingNotification = $state(false);
     let message = $state('');
     let messageType = $state<'success' | 'error' | null>(null);
-    let showConfig = $state(false);
+    let testMessage = $state('');
+    let testMessageType = $state<'success' | 'error' | null>(null);
+    let wifiStatus = $state<WifiStatus | null>(null);
+    let wifiStatusTimer = $state<ReturnType<typeof setInterval> | null>(null);
+    let scanning = $state(false);
+    let scanResults = $state<WifiNetwork[]>([]);
+    let dnsServersInput = $state('');
 
-    async function loadConfig() {
+    async function load_config() {
         try {
             loading = true;
             config = await get_config();
+            dnsServersInput = config.dns_servers ? config.dns_servers.join(', ') : '';
             message = '';
             messageType = null;
+            poll_wifi_status();
         } catch (error) {
             message = `Failed to load config: ${error}`;
             messageType = 'error';
@@ -23,9 +46,18 @@
         }
     }
 
-    async function saveConfig() {
+    async function save_config() {
         if (!config) return;
 
+        const trimmed = dnsServersInput.trim();
+        config.dns_servers =
+            trimmed.length > 0
+                ? trimmed
+                      .split(',')
+                      .map((s) => s.trim())
+                      .filter((s) => s.length > 0)
+                : null;
+
         try {
             saving = true;
             await set_config(config);
@@ -40,32 +72,84 @@
         }
     }
 
-    // Load config when first shown
-    $effect(() => {
-        if (showConfig && !config) {
-            loadConfig();
+    async function poll_wifi_status() {
+        if (wifiStatusTimer) clearInterval(wifiStatusTimer);
+        try {
+            wifiStatus = await get_wifi_status();
+        } catch {
+            wifiStatus = null;
         }
+        wifiStatusTimer = setInterval(async () => {
+            try {
+                wifiStatus = await get_wifi_status();
+            } catch {
+                wifiStatus = null;
+            }
+        }, 5000);
+    }
+
+    let scanError = $state('');
+
+    async function do_scan() {
+        scanning = true;
+        scanError = '';
+        try {
+            scanResults = await scan_wifi_networks();
+        } catch (error) {
+            scanResults = [];
+            scanError = `Scan failed: ${error}`;
+        } finally {
+            scanning = false;
+        }
+    }
+
+    function select_network(network: WifiNetwork) {
+        if (config) {
+            config.wifi_ssid = network.ssid;
+            config.wifi_password = '';
+            config.wifi_security =
+                network.security === 'WPA3' || network.security === 'WPA3 (transition)'
+                    ? 'sae'
+                    : 'wpa_psk';
+            scanResults = [];
+        }
+    }
+
+    async function send_test_notification() {
+        try {
+            testingNotification = true;
+            testMessage = '';
+            testMessageType = null;
+            await test_notification();
+            testMessage = 'Test notification sent successfully!';
+            testMessageType = 'success';
+        } catch (error) {
+            testMessage = `${error}`;
+            testMessageType = 'error';
+        } finally {
+            testingNotification = false;
+        }
+    }
+
+    $effect(() => {
+        if (shown && !config) {
+            load_config();
+        }
+        if (!shown && wifiStatusTimer) {
+            clearInterval(wifiStatusTimer);
+            wifiStatusTimer = null;
+        }
+        return () => {
+            if (wifiStatusTimer) {
+                clearInterval(wifiStatusTimer);
+                wifiStatusTimer = null;
+            }
+        };
     });
 </script>
 
-<div class="bg-white rounded-lg shadow-md p-6 m-4">
-    <button
-        class="w-full flex justify-between items-center text-xl font-bold mb-4 text-rayhunter-dark-blue hover:text-rayhunter-blue"
-        onclick={() => (showConfig = !showConfig)}
-    >
-        <span>Configuration</span>
-        <svg
-            class="w-6 h-6 transition-transform {showConfig ? 'rotate-180' : ''}"
-            fill="none"
-            stroke="currentColor"
-            viewBox="0 0 24 24"
-        >
-            <path stroke-linecap="round" stroke-linejoin="round" stroke-width="2" d="M19 9l-7 7-7-7"
-            ></path>
-        </svg>
-    </button>
-
-    {#if showConfig}
+<Modal bind:shown title="Configuration">
+    <div class="p-2">
         {#if loading}
             <div class="text-center py-4">Loading config...</div>
         {:else if config}
@@ -73,7 +157,7 @@
                 class="space-y-4"
                 onsubmit={(e) => {
                     e.preventDefault();
-                    saveConfig();
+                    save_config();
                 }}
             >
                 <div>
@@ -83,13 +167,18 @@
                     <select
                         id="ui_level"
                         bind:value={config.ui_level}
-                        class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-none focus:ring-2 focus:ring-rayhunter-blue"
+                        class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
                     >
-                        <option value={0}>0 - Invisible mode</option>
-                        <option value={1}>1 - Subtle mode (colored line)</option>
-                        <option value={2}>2 - Demo mode (orca gif)</option>
-                        <option value={3}>3 - EFF logo</option>
+                        <option value={0}>Invisible mode</option>
+                        <option value={1}>Subtle mode (colored line)</option>
+                        <option value={2}>Demo mode (orca gif)</option>
+                        <option value={3}>EFF logo</option>
+                        <option value={4}>High visibility (full screen color)</option>
                     </select>
+                    <p class="text-xs text-gray-500 mt-1">
+                        Note: Rayhunter draws over the device's native UI, so some flickering is
+                        expected
+                    </p>
                 </div>
 
                 <div>
@@ -102,12 +191,10 @@
                     <select
                         id="key_input_mode"
                         bind:value={config.key_input_mode}
-                        class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-none focus:ring-2 focus:ring-rayhunter-blue"
+                        class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
                     >
-                        <option value={0}>0 - Disable button control</option>
-                        <option value={1}
-                            >1 - Double-tap power button to start/stop recording</option
-                        >
+                        <option value={0}>Disable button control</option>
+                        <option value={1}>Double-tap power button to start new recording</option>
                     </select>
                 </div>
 
@@ -117,7 +204,7 @@
                             id="colorblind_mode"
                             type="checkbox"
                             bind:checked={config.colorblind_mode}
-                            class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded"
+                            class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
                         />
                         <label for="colorblind_mode" class="ml-2 block text-sm text-gray-700">
                             Colorblind Mode
@@ -125,57 +212,451 @@
                     </div>
                 </div>
 
-                <div class="border-t pt-4 mt-6 space-y-3">
+                <div class="border-t border-gray-200 pt-4 mt-6 space-y-3">
                     <h3 class="text-lg font-semibold text-gray-800 mb-4">Notification Settings</h3>
+
+                    <div class="flex items-center">
+                        <input
+                            id="auto_check_updates"
+                            type="checkbox"
+                            bind:checked={config.auto_check_updates}
+                            class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
+                        />
+                        <label for="auto_check_updates" class="ml-2 block text-sm text-gray-700">
+                            Automatically check for software updates
+                        </label>
+                    </div>
+                    <p class="text-xs text-gray-500">
+                        When enabled, Rayhunter periodically checks GitHub for new releases and
+                        shows an update notice in the web UI.
+                    </p>
+
+                    <ExpandableInput
+                        bind:value={config.ntfy_url}
+                        checkboxId="ntfy_enabled"
+                        inputId="ntfy_url"
+                        label="Enable ntfy notifications"
+                        inputLabel="ntfy URL"
+                        inputPlaceholder="https://ntfy.sh/my-rayhunter"
+                        inputHelp="Test button below uses the saved configuration URL, not the input above"
+                    >
+                        <div>
+                            <button
+                                type="button"
+                                onclick={send_test_notification}
+                                disabled={testingNotification}
+                                class="bg-rayhunter-blue hover:bg-rayhunter-dark-blue disabled:opacity-50 disabled:cursor-not-allowed text-white font-bold py-2 px-4 rounded-md flex flex-row gap-1 items-center"
+                            >
+                                {#if testingNotification}
+                                    <div
+                                        class="w-4 h-4 border-2 border-white border-t-transparent rounded-full animate-spin"
+                                    ></div>
+                                    Sending...
+                                {:else}
+                                    <svg
+                                        class="w-4 h-4"
+                                        fill="none"
+                                        stroke="currentColor"
+                                        viewBox="0 0 24 24"
+                                    >
+                                        <path
+                                            stroke-linecap="round"
+                                            stroke-linejoin="round"
+                                            stroke-width="2"
+                                            d="M12 19l9 2-9-18-9 18 9-2zm0 0v-8"
+                                        ></path>
+                                    </svg>
+                                    Send Test Notification
+                                {/if}
+                            </button>
+                            {#if testMessage}
+                                <div
+                                    class="mt-2 p-2 rounded-sm text-sm {testMessageType === 'error'
+                                        ? 'bg-red-100 text-red-700'
+                                        : 'bg-green-100 text-green-700'}"
+                                >
+                                    {testMessage}
+                                </div>
+                            {/if}
+                        </div>
+
+                        <div class="space-y-2">
+                            <div class="block text-sm font-medium text-gray-700 mb-1">
+                                Enabled Notification Types
+                            </div>
+                            <div class="flex items-center">
+                                <input
+                                    type="checkbox"
+                                    id="enable_warning_notifications"
+                                    value="Warning"
+                                    bind:group={config.enabled_notifications}
+                                />
+                                <label
+                                    for="enable_warning_notifications"
+                                    class="ml-2 block text-sm text-gray-700"
+                                >
+                                    Warnings
+                                </label>
+                            </div>
+                            <div class="flex items-center">
+                                <input
+                                    type="checkbox"
+                                    id="enable_lowbattery_notifications"
+                                    value="LowBattery"
+                                    bind:group={config.enabled_notifications}
+                                />
+                                <label
+                                    for="enable_lowbattery_notifications"
+                                    class="ml-2 block text-sm text-gray-700"
+                                >
+                                    Low Battery
+                                </label>
+                            </div>
+                            <div class="flex items-center">
+                                <input
+                                    type="checkbox"
+                                    id="enable_update_notifications"
+                                    value={enabled_notifications.Update}
+                                    bind:group={config.enabled_notifications}
+                                />
+                                <label
+                                    for="enable_update_notifications"
+                                    class="ml-2 block text-sm text-gray-700"
+                                >
+                                    Software Updates
+                                </label>
+                            </div>
+                        </div>
+                    </ExpandableInput>
+                </div>
+
+                <div class="border-t border-gray-200 pt-4 mt-6 space-y-3">
+                    <h3 class="text-lg font-semibold text-gray-800 mb-4">Storage Management</h3>
+
                     <div>
-                        <label for="ntfy_url" class="block text-sm font-medium text-gray-700 mb-1">
-                            ntfy URL for Sending Notifications (if unset you will not receive
-                            notifications)
+                        <label
+                            for="min_space_to_start_recording_mb"
+                            class="block text-sm font-medium text-gray-700 mb-1"
+                        >
+                            Minimum Space to Start Recording (MB)
                         </label>
                         <input
-                            id="ntfy_url"
-                            type="url"
-                            bind:value={config.ntfy_url}
-                            class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-none focus:ring-2 focus:ring-rayhunter-blue"
+                            id="min_space_to_start_recording_mb"
+                            type="number"
+                            min="1"
+                            bind:value={config.min_space_to_start_recording_mb}
+                            class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
                         />
+                        <p class="text-xs text-gray-500 mt-1">
+                            Recording will not start if less than this amount of disk space is free
+                        </p>
                     </div>
 
-                    <div class="space-y-2">
-                        <div class="block text-sm font-medium text-gray-700 mb-1">
-                            Enabled Notification Types
-                        </div>
-                        <div class="flex items-center">
-                            <input
-                                type="checkbox"
-                                id="enable_warning_notifications"
-                                value="Warning"
-                                bind:group={config.enabled_notifications}
-                            />
-                            <label
-                                for="enable_warning_notifications"
-                                class="ml-2 block text-sm text-gray-700"
-                            >
-                                Warnings
-                            </label>
-                        </div>
-                        <div class="flex items-center">
-                            <input
-                                type="checkbox"
-                                id="enable_lowbattery_notifications"
-                                value="LowBattery"
-                                bind:group={config.enabled_notifications}
-                            />
-                            <label
-                                for="enable_lowbattery_notifications"
-                                class="ml-2 block text-sm text-gray-700"
-                            >
-                                Low Battery
-                            </label>
-                        </div>
+                    <div>
+                        <label
+                            for="min_space_to_continue_recording_mb"
+                            class="block text-sm font-medium text-gray-700 mb-1"
+                        >
+                            Minimum Space to Continue Recording (MB)
+                        </label>
+                        <input
+                            id="min_space_to_continue_recording_mb"
+                            type="number"
+                            min="1"
+                            bind:value={config.min_space_to_continue_recording_mb}
+                            class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+                        />
+                        <p class="text-xs text-gray-500 mt-1">
+                            Recording will stop automatically if disk space drops below this level
+                        </p>
                     </div>
                 </div>
 
-                <div class="border-t pt-4 mt-6">
+                <div class="border-t border-gray-200 pt-4 mt-6 space-y-3">
+                    <h3 class="text-lg font-semibold text-gray-800 mb-4">WebDAV Upload</h3>
+                    <p class="text-xs text-gray-500">
+                        Once a recording has been closed for at least the configured age, both the
+                        .qmdl and .ndjson files are uploaded in the background to the WebDAV server.
+                    </p>
+
+                    <ExpandableInput
+                        bind:value={config.webdav.url}
+                        checkboxId="webdav_enabled"
+                        inputId="webdav_url"
+                        label="Enable WebDAV upload"
+                        inputLabel="Server URL"
+                        inputPlaceholder="https://dav.example.com/rayhunter/"
+                        inputHelp="Files are uploaded via HTTP PUT under this base URL. No folders are created, and folders in this base URL are assumed to exist already."
+                    >
+                        <div>
+                            <label
+                                for="webdav_username"
+                                class="block text-sm font-medium text-gray-700 mb-1"
+                            >
+                                Username
+                            </label>
+                            <input
+                                id="webdav_username"
+                                type="text"
+                                bind:value={config.webdav.username}
+                                class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+                            />
+                            <p class="text-xs text-gray-500 mt-1">
+                                Optional. Leave blank for unauthenticated uploads.
+                            </p>
+                        </div>
+
+                        <div>
+                            <label
+                                for="webdav_password"
+                                class="block text-sm font-medium text-gray-700 mb-1"
+                            >
+                                Password
+                            </label>
+                            <input
+                                id="webdav_password"
+                                type="password"
+                                bind:value={config.webdav.password}
+                                class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+                            />
+                            <p class="text-xs text-gray-500 mt-1">
+                                A password without a username will be rejected and the request will
+                                be sent unauthenticated.
+                            </p>
+                        </div>
+
+                        <div>
+                            <label
+                                for="webdav_upload_timeout_secs"
+                                class="block text-sm font-medium text-gray-700 mb-1"
+                            >
+                                Upload Timeout (seconds)
+                            </label>
+                            <input
+                                id="webdav_upload_timeout_secs"
+                                type="number"
+                                min="1"
+                                bind:value={config.webdav.upload_timeout_secs}
+                                class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+                            />
+                        </div>
+
+                        <div>
+                            <label
+                                for="webdav_poll_interval_secs"
+                                class="block text-sm font-medium text-gray-700 mb-1"
+                            >
+                                Poll Interval (seconds)
+                            </label>
+                            <input
+                                id="webdav_poll_interval_secs"
+                                type="number"
+                                min="1"
+                                bind:value={config.webdav.poll_interval_secs}
+                                class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+                            />
+                            <p class="text-xs text-gray-500 mt-1">
+                                How often the worker checks for new entries to upload.
+                            </p>
+                        </div>
+
+                        <div>
+                            <label
+                                for="webdav_min_age_secs"
+                                class="block text-sm font-medium text-gray-700 mb-1"
+                            >
+                                Minimum Age Before Upload (seconds)
+                            </label>
+                            <input
+                                id="webdav_min_age_secs"
+                                type="number"
+                                min="0"
+                                bind:value={config.webdav.min_age_secs}
+                                class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+                            />
+                            <p class="text-xs text-gray-500 mt-1">
+                                How long a recording must be closed before it becomes eligible for
+                                upload.
+                            </p>
+                        </div>
+
+                        <div class="flex items-center">
+                            <input
+                                id="webdav_delete_on_upload"
+                                type="checkbox"
+                                bind:checked={config.webdav.delete_on_upload}
+                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
+                            />
+                            <label
+                                for="webdav_delete_on_upload"
+                                class="ml-2 block text-sm text-gray-700"
+                            >
+                                Delete on successful upload
+                            </label>
+                        </div>
+                        <p class="text-xs text-gray-500">
+                            When enabled, the local files are removed after a successful upload.
+                            Otherwise the manifest is just marked as uploaded.
+                        </p>
+                    </ExpandableInput>
+                </div>
+
+                {#if config.device === 'orbic' || config.device === 'moxee' || config.device === 'tmobile' || config.device === 'wingtech'}
+                    <div class="border-t border-gray-200 pt-4 mt-6 space-y-3">
+                        <h3 class="text-lg font-semibold text-gray-800 mb-4">WiFi Client Mode</h3>
+                        <p class="text-xs text-gray-500">
+                            Connect the device to an existing WiFi network for internet access (e.g.
+                            notifications, remote access). The hotspot AP stays running alongside
+                            WiFi client mode.
+                        </p>
+
+                        <div class="flex items-center">
+                            <input
+                                id="wifi_enabled"
+                                type="checkbox"
+                                bind:checked={config.wifi_enabled}
+                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
+                            />
+                            <label for="wifi_enabled" class="ml-2 block text-sm text-gray-700">
+                                Enable WiFi
+                            </label>
+                        </div>
+                        <p class="text-xs text-gray-500">
+                            Unchecking stops WiFi without clearing saved credentials.
+                        </p>
+
+                        {#if wifiStatus && config.wifi_enabled}
+                            {#if wifiStatus.state === 'connected'}
+                                <p class="text-xs text-green-600">
+                                    Connected to "{wifiStatus.ssid}" ({wifiStatus.ip})
+                                </p>
+                            {:else if wifiStatus.state === 'connecting'}
+                                <p class="text-xs text-amber-600">Connecting...</p>
+                            {:else if wifiStatus.state === 'recovering'}
+                                <p class="text-xs text-amber-600">Recovering connection...</p>
+                            {:else if wifiStatus.state === 'dataPathDead'}
+                                <p class="text-xs text-amber-600">
+                                    Data path stalled, attempting recovery...
+                                </p>
+                            {:else if wifiStatus.state === 'failed'}
+                                <p class="text-xs text-red-600">
+                                    Failed: {wifiStatus.error}
+                                </p>
+                            {/if}
+                        {/if}
+
+                        <div>
+                            <label
+                                for="wifi_ssid"
+                                class="block text-sm font-medium text-gray-700 mb-1"
+                            >
+                                WiFi Network Name (SSID)
+                            </label>
+                            <div class="flex gap-2">
+                                <input
+                                    id="wifi_ssid"
+                                    type="text"
+                                    bind:value={config.wifi_ssid}
+                                    placeholder="MyWiFiNetwork"
+                                    class="flex-1 px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+                                />
+                                <button
+                                    type="button"
+                                    onclick={do_scan}
+                                    disabled={scanning}
+                                    class="px-3 py-2 text-sm bg-gray-100 hover:bg-gray-200 disabled:opacity-50 border border-gray-300 rounded-md"
+                                >
+                                    {scanning ? 'Scanning...' : 'Scan'}
+                                </button>
+                            </div>
+                        </div>
+
+                        {#if scanError}
+                            <p class="text-xs text-red-600">{scanError}</p>
+                        {/if}
+
+                        {#if scanResults.length > 0}
+                            <div
+                                class="border border-gray-200 rounded-md max-h-40 overflow-y-auto divide-y divide-gray-200"
+                            >
+                                {#each scanResults as network}
+                                    <button
+                                        type="button"
+                                        class="w-full px-3 py-2 text-left text-sm hover:bg-gray-50 flex justify-between"
+                                        onclick={() => select_network(network)}
+                                    >
+                                        <span>{network.ssid}</span>
+                                        <span class="text-gray-400"
+                                            >{network.signal_dbm} dBm &middot; {network.security}</span
+                                        >
+                                    </button>
+                                {/each}
+                            </div>
+                        {/if}
+
+                        {#if config.wifi_ssid}
+                            <div>
+                                <label
+                                    for="wifi_security"
+                                    class="block text-sm font-medium text-gray-700 mb-1"
+                                >
+                                    Security Type
+                                </label>
+                                <select
+                                    id="wifi_security"
+                                    bind:value={config.wifi_security}
+                                    class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+                                >
+                                    <option value="wpa_psk">WPA2 (WPA-PSK)</option>
+                                    <option value="sae">WPA3 (SAE)</option>
+                                </select>
+                            </div>
+                        {/if}
+
+                        <div>
+                            <label
+                                for="wifi_password"
+                                class="block text-sm font-medium text-gray-700 mb-1"
+                            >
+                                WiFi Password
+                            </label>
+                            <input
+                                id="wifi_password"
+                                type="password"
+                                bind:value={config.wifi_password}
+                                placeholder="Enter password"
+                                class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+                            />
+                            <p class="text-xs text-gray-500 mt-1">
+                                Changing the network requires re-entering the password.
+                            </p>
+                        </div>
+
+                        {#if config.wifi_ssid}
+                            <div>
+                                <label
+                                    for="dns_servers"
+                                    class="block text-sm font-medium text-gray-700 mb-1"
+                                >
+                                    DNS Servers
+                                </label>
+                                <input
+                                    id="dns_servers"
+                                    type="text"
+                                    bind:value={dnsServersInput}
+                                    placeholder="9.9.9.9, 149.112.112.112"
+                                    class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+                                />
+                                <p class="text-xs text-gray-500 mt-1">
+                                    Comma-separated. Used when WiFi is active. Defaults to 9.9.9.9,
+                                    149.112.112.112 (Quad9).
+                                </p>
+                            </div>
+                        {/if}
+                    </div>
+                {/if}
+
+                <div class="border-t border-gray-200 pt-4 mt-6">
                     <h3 class="text-lg font-semibold text-gray-800 mb-4">
                         Analyzer Heuristic Settings
                     </h3>
@@ -185,7 +666,7 @@
                                 id="imsi_requested"
                                 type="checkbox"
                                 bind:checked={config.analyzers.imsi_requested}
-                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded"
+                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
                             />
                             <label for="imsi_requested" class="ml-2 block text-sm text-gray-700">
                                 IMSI Requested Heuristic
@@ -197,7 +678,7 @@
                                 id="connection_redirect_2g_downgrade"
                                 type="checkbox"
                                 bind:checked={config.analyzers.connection_redirect_2g_downgrade}
-                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded"
+                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
                             />
                             <label
                                 for="connection_redirect_2g_downgrade"
@@ -212,7 +693,7 @@
                                 id="lte_sib6_and_7_downgrade"
                                 type="checkbox"
                                 bind:checked={config.analyzers.lte_sib6_and_7_downgrade}
-                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded"
+                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
                             />
                             <label
                                 for="lte_sib6_and_7_downgrade"
@@ -227,7 +708,7 @@
                                 id="null_cipher"
                                 type="checkbox"
                                 bind:checked={config.analyzers.null_cipher}
-                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded"
+                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
                             />
                             <label for="null_cipher" class="ml-2 block text-sm text-gray-700">
                                 Null Cipher Heuristic
@@ -239,7 +720,7 @@
                                 id="nas_null_cipher"
                                 type="checkbox"
                                 bind:checked={config.analyzers.nas_null_cipher}
-                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded"
+                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
                             />
                             <label for="nas_null_cipher" class="ml-2 block text-sm text-gray-700">
                                 NAS Null Cipher Heuristic
@@ -251,7 +732,7 @@
                                 id="incomplete_sib"
                                 type="checkbox"
                                 bind:checked={config.analyzers.incomplete_sib}
-                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded"
+                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
                             />
                             <label for="incomplete_sib" class="ml-2 block text-sm text-gray-700">
                                 Incomplete SIB Heuristic
@@ -263,15 +744,97 @@
                                 id="test_analyzer"
                                 type="checkbox"
                                 bind:checked={config.analyzers.test_analyzer}
-                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded"
+                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
                             />
                             <label for="test_analyzer" class="ml-2 block text-sm text-gray-700">
                                 Test Heuristic (noisy!)
                             </label>
                         </div>
+                        <div class="flex items-center">
+                            <input
+                                id="diagnostic_analyzer"
+                                type="checkbox"
+                                bind:checked={config.analyzers.diagnostic_analyzer}
+                                class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
+                            />
+                            <label
+                                for="diagnostic_analyzer"
+                                class="ml-2 block text-sm text-gray-700"
+                            >
+                                Diagnostic Analyzer
+                            </label>
+                        </div>
                     </div>
                 </div>
 
+                <div class="border-t border-gray-200 pt-4 mt-6 space-y-3">
+                    <h3 class="text-lg font-semibold text-gray-800 mb-4">GPS Settings</h3>
+                    <div>
+                        <label for="gps_mode" class="block text-sm font-medium text-gray-700 mb-1"
+                            >GPS Mode</label
+                        >
+                        <select
+                            id="gps_mode"
+                            bind:value={config.gps_mode}
+                            class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-none focus:ring-2 focus:ring-rayhunter-blue"
+                        >
+                            <option value={GpsMode.Disabled}>Disabled</option>
+                            <option value={GpsMode.Fixed}>Fixed coordinates</option>
+                            <option value={GpsMode.Api}>API endpoint</option>
+                        </select>
+                        <p class="text-xs text-gray-500 mt-1">
+                            {#if config.gps_mode === GpsMode.Api}
+                                POST latitude and longitude to <code>/api/gps</code> from any device on
+                                the network. Timestamp is derived from packet capture timing.
+                            {:else if config.gps_mode === GpsMode.Fixed}
+                                GPS coordinates are fixed to the values below.
+                            {:else}
+                                GPS is disabled; no coordinates will be tracked.
+                            {/if}
+                        </p>
+                    </div>
+                    {#if config.gps_mode === GpsMode.Fixed}
+                        <div>
+                            <label
+                                for="gps_fixed_latitude"
+                                class="block text-sm font-medium text-gray-700 mb-1"
+                                >Fixed Latitude</label
+                            >
+                            <input
+                                id="gps_fixed_latitude"
+                                type="number"
+                                min="-90"
+                                max="90"
+                                step="any"
+                                required
+                                bind:value={config.gps_fixed_latitude}
+                                placeholder="e.g. 37.7749"
+                                class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-none focus:ring-2 focus:ring-rayhunter-blue"
+                            />
+                            <p class="text-xs text-gray-500 mt-1">Decimal degrees, -90 to 90</p>
+                        </div>
+                        <div>
+                            <label
+                                for="gps_fixed_longitude"
+                                class="block text-sm font-medium text-gray-700 mb-1"
+                                >Fixed Longitude</label
+                            >
+                            <input
+                                id="gps_fixed_longitude"
+                                type="number"
+                                min="-180"
+                                max="180"
+                                step="any"
+                                required
+                                bind:value={config.gps_fixed_longitude}
+                                placeholder="e.g. -122.4194"
+                                class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-none focus:ring-2 focus:ring-rayhunter-blue"
+                            />
+                            <p class="text-xs text-gray-500 mt-1">Decimal degrees, -180 to 180</p>
+                        </div>
+                    {/if}
+                </div>
+
                 <div class="flex gap-2 pt-4">
                     <button
                         type="submit"
@@ -304,7 +867,7 @@
             </form>
             {#if message}
                 <div
-                    class="mt-4 p-3 rounded {messageType === 'error'
+                    class="mt-4 p-3 rounded-sm {messageType === 'error'
                         ? 'bg-red-100 text-red-700'
                         : 'bg-green-100 text-green-700'}"
                 >
@@ -316,5 +879,5 @@
                 Failed to load configuration. Please try reloading the page.
             </div>
         {/if}
-    {/if}
-</div>
+    </div>
+</Modal>

daemon/web/src/lib/components/DeleteAllButton.svelte

@@ -5,8 +5,8 @@
 <div class="flex flex-row justify-end gap-2">
     <DeleteButton
         text="Delete ALL Recordings"
-        prompt={`Are you sure you want to delete ALL recordings?`}
-        url={`/api/delete-all-recordings`}
+        prompt="Are you sure you want to delete ALL recordings?"
+        url="/api/delete-all-recordings"
         name="all recodings"
     />
 </div>

daemon/web/src/lib/components/DeleteButton.svelte

@@ -12,7 +12,7 @@
         name: string;
     } = $props();
 
-    function confirmDelete() {
+    function confirm_delete() {
         if (window.confirm(prompt)) {
             user_action_req('POST', url, 'Unable to delete recording ' + name);
         }
@@ -21,7 +21,7 @@
 
 <button
     class="bg-red-500 hover:bg-red-700 text-white font-bold py-2 px-2 sm:px-4 rounded-md flex flex-row"
-    onclick={confirmDelete}
+    onclick={confirm_delete}
     aria-label="delete"
 >
     <p>{text}</p>

daemon/web/src/lib/components/ExpandableInput.svelte

@@ -0,0 +1,82 @@
+<script lang="ts">
+    import type { Snippet } from 'svelte';
+
+    let {
+        value = $bindable(''),
+        checkboxId,
+        inputId,
+        label,
+        inputLabel,
+        inputPlaceholder = '',
+        inputHelp = '',
+        children,
+    }: {
+        value: string | null;
+        checkboxId: string;
+        inputId: string;
+        label: string;
+        inputLabel: string;
+        inputPlaceholder?: string;
+        inputHelp?: string;
+        children?: Snippet;
+    } = $props();
+
+    function has_value(text: string | null) {
+        return text !== null && text.trim() !== '';
+    }
+
+    let expanded = $state(has_value(value));
+    let inputElement = $state<HTMLInputElement | null>(null);
+
+    function handle_checkbox_change(e: Event) {
+        expanded = (e.currentTarget as HTMLInputElement).checked;
+        if (expanded) {
+            setTimeout(() => inputElement?.focus(), 0);
+        } else {
+            value = '';
+        }
+    }
+
+    function handle_input_blur() {
+        if (!has_value(value)) {
+            expanded = false;
+        }
+    }
+</script>
+
+<div class="flex items-center">
+    <input
+        id={checkboxId}
+        type="checkbox"
+        checked={expanded}
+        onchange={handle_checkbox_change}
+        class="h-4 w-4 text-rayhunter-blue focus:ring-rayhunter-blue border-gray-300 rounded-sm"
+    />
+    <label for={checkboxId} class="ml-2 block text-sm text-gray-700">
+        {label}
+    </label>
+</div>
+
+{#if expanded}
+    <div>
+        <label for={inputId} class="block text-sm font-medium text-gray-700 mb-1">
+            {inputLabel}
+        </label>
+        <input
+            id={inputId}
+            type="text"
+            bind:this={inputElement}
+            bind:value
+            onblur={handle_input_blur}
+            placeholder={inputPlaceholder}
+            class="w-full px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
+        />
+        {#if inputHelp}
+            <p class="text-xs text-gray-500 mt-1">
+                {inputHelp}
+            </p>
+        {/if}
+    </div>
+
+    {@render children?.()}
+{/if}

daemon/web/src/lib/components/LogView.svelte

@@ -1,34 +1,13 @@
 <script lang="ts">
     import { get_logs } from '$lib/utils.svelte';
-    import { onMount } from 'svelte';
+    import Modal from './Modal.svelte';
 
     let { shown = $bindable() }: { shown: boolean } = $props();
     let content: string | undefined = $state(undefined);
 
-    onMount(() => {
-        // Used by LogView modal
-        window.addEventListener('scroll', () => {
-            document.documentElement.style.setProperty('--scroll-y', `${window.scrollY}px`);
-        });
-    });
-
     $effect(() => {
-        if (shown) {
-            const scrollY = document.documentElement.style.getPropertyValue('--scroll-y');
-            const body = document.body;
-            body.style.position = 'fixed';
-            body.style.top = `-${scrollY}`;
-        } else {
-            const body = document.body;
-            const scrollY = body.style.top;
-            body.style.position = '';
-            body.style.top = '';
-            window.scrollTo(0, parseInt(scrollY || '0') * -1);
-        }
-
         const interval = setInterval(async () => {
             try {
-                // Don't update UI if browser tab isn't visible
                 if (content !== undefined && (document.hidden || !shown)) {
                     return;
                 }
@@ -42,33 +21,8 @@
     });
 </script>
 
-{#if shown}
-    <div
-        class="fixed left-5 right-5 top-5 bottom-5 z-50 bg-white border border-white rounded-md
-		flex flex-col p-2 drop-shadow"
-    >
-        <div class="flex h-20 justify-between items-center p-1">
-            <span class="text-2xl mb-2">Log</span>
-            <button onclick={() => (shown = false)} aria-label="close">
-                <svg
-                    xmlns="http://www.w3.org/2000/svg"
-                    aria-hidden="true"
-                    width="24"
-                    height="24"
-                    fill="currentColor"
-                    viewBox="0 0 24 24"
-                >
-                    <path
-                        fill-rule="evenodd"
-                        clip-rule="evenodd"
-                        d="M5.29289 5.29289C5.68342 4.90237 6.31658 4.90237 6.70711 5.29289L12 10.5858L17.2929 5.29289C17.6834 4.90237 18.3166 4.90237 18.7071 5.29289C19.0976 5.68342 19.0976 6.31658 18.7071 6.70711L13.4142 12L18.7071 17.2929C19.0976 17.6834 19.0976 18.3166 18.7071 18.7071C18.3166 19.0976 17.6834 19.0976 17.2929 18.7071L12 13.4142L6.70711 18.7071C6.31658 19.0976 5.68342 19.0976 5.29289 18.7071C4.90237 18.3166 4.90237 17.6834 5.29289 17.2929L10.5858 12L5.29289 6.70711C4.90237 6.31658 4.90237 5.68342 5.29289 5.29289Z"
-                        fill="#0F1729"
-                    />
-                </svg>
-            </button>
-        </div>
-        <div class="bg-gray-100 border border-gray-100 rounded-md overflow-scroll">
-            <pre class="m-2">{content}</pre>
-        </div>
+<Modal bind:shown title="Logs">
+    <div class="bg-gray-100 border border-gray-100 rounded-md overflow-scroll">
+        <pre class="m-2">{content}</pre>
     </div>
-{/if}
+</Modal>

daemon/web/src/lib/components/ManifestCard.svelte

@@ -44,7 +44,7 @@
 </script>
 
 <div
-    class="{status_row_color} {status_border_color} drop-shadow p-4 flex flex-col gap-2 border rounded-md flex-1 overflow-x-auto overflow-y-hidden"
+    class="{status_row_color} {status_border_color} drop-shadow-sm p-4 flex flex-col gap-2 border rounded-md flex-1 overflow-x-auto overflow-y-hidden"
 >
     {#if current}
         <div class="flex flex-row justify-between gap-2">
@@ -81,6 +81,11 @@
                 'N/A'}</span
         >
     </div>
+    {#if entry.stop_reason}
+        <div class="bg-yellow-50 border border-yellow-300 rounded-sm p-2 text-yellow-800 text-sm">
+            {entry.stop_reason}
+        </div>
+    {/if}
     <div class="flex flex-row justify-between lg:justify-end gap-1 mt-2 overflow-x-auto">
         <DownloadLink url={entry.get_pcap_url()} text="pcap" full_button />
         <DownloadLink url={entry.get_qmdl_url()} text="qmdl" full_button />
@@ -95,7 +100,7 @@
             />
         {/if}
     </div>
-    <div class="border-b {analysis_visible ? '' : 'hidden'}">
+    <div class="border-b border-gray-200 {analysis_visible ? '' : 'hidden'}">
         <AnalysisView {entry} {manager} {current} />
     </div>
 </div>

daemon/web/src/lib/components/ManifestTable.svelte

@@ -16,7 +16,7 @@
 {#if $screenIsLgUp}
     <table class="table-auto text-left table">
         <thead>
-            <tr class="bg-gray-100 drop-shadow">
+            <tr class="bg-gray-100 drop-shadow-sm">
                 <th class="p-2" scope="col">ID</th>
                 <th class="p-2" scope="col">Started</th>
                 <th class="p-2" scope="col">Last Message</th>

daemon/web/src/lib/components/ManifestTableRow.svelte

@@ -36,7 +36,7 @@
     }
 </script>
 
-<tr class="{status_row_color} drop-shadow">
+<tr class="{status_row_color} drop-shadow-sm">
     <td class="p-2">{entry.name}</td>
     <td class="p-2">{date_formatter.format(entry.start_time)}</td>
     <td class="p-2"
@@ -65,8 +65,8 @@
         </td>
     {/if}
 </tr>
-<tr class="{alternating_row_color} border-b {analysis_visible ? '' : 'hidden'}">
-    <td class="border-t border-dashed p-2" colspan="9">
+<tr class="{alternating_row_color} border-b border-gray-200 {analysis_visible ? '' : 'hidden'}">
+    <td class="border-t border-gray-200 border-dashed p-2" colspan="9">
         <AnalysisView {entry} {manager} {current} />
     </td>
 </tr>

daemon/web/src/lib/components/Modal.svelte

@@ -0,0 +1,64 @@
+<script lang="ts">
+    import type { Snippet } from 'svelte';
+    import { onMount } from 'svelte';
+
+    let {
+        shown = $bindable(),
+        title,
+        children,
+    }: { shown: boolean; title: string; children: Snippet } = $props();
+
+    onMount(() => {
+        const handler = () => {
+            document.documentElement.style.setProperty('--scroll-y', `${window.scrollY}px`);
+        };
+        window.addEventListener('scroll', handler);
+        return () => window.removeEventListener('scroll', handler);
+    });
+
+    $effect(() => {
+        if (shown) {
+            const scrollY = document.documentElement.style.getPropertyValue('--scroll-y');
+            const body = document.body;
+            body.style.position = 'fixed';
+            body.style.top = `-${scrollY}`;
+        } else {
+            const body = document.body;
+            const scrollY = body.style.top;
+            body.style.position = '';
+            body.style.top = '';
+            window.scrollTo(0, parseInt(scrollY || '0') * -1);
+        }
+    });
+</script>
+
+{#if shown}
+    <div
+        class="fixed left-5 right-5 top-5 bottom-5 z-50 bg-white border border-white rounded-md
+		flex flex-col p-2 drop-shadow-sm"
+    >
+        <div class="flex justify-between items-center p-1">
+            <span class="text-2xl">{title}</span>
+            <button onclick={() => (shown = false)} aria-label="close">
+                <svg
+                    xmlns="http://www.w3.org/2000/svg"
+                    aria-hidden="true"
+                    width="24"
+                    height="24"
+                    fill="currentColor"
+                    viewBox="0 0 24 24"
+                >
+                    <path
+                        fill-rule="evenodd"
+                        clip-rule="evenodd"
+                        d="M5.29289 5.29289C5.68342 4.90237 6.31658 4.90237 6.70711 5.29289L12 10.5858L17.2929 5.29289C17.6834 4.90237 18.3166 4.90237 18.7071 5.29289C19.0976 5.68342 19.0976 6.31658 18.7071 6.70711L13.4142 12L18.7071 17.2929C19.0976 17.6834 19.0976 18.3166 18.7071 18.7071C18.3166 19.0976 17.6834 19.0976 17.2929 18.7071L12 13.4142L6.70711 18.7071C6.31658 19.0976 5.68342 19.0976 5.29289 18.7071C4.90237 18.3166 4.90237 17.6834 5.29289 17.2929L10.5858 12L5.29289 6.70711C4.90237 6.31658 4.90237 5.68342 5.29289 5.29289Z"
+                        fill="#0F1729"
+                    />
+                </svg>
+            </button>
+        </div>
+        <div class="overflow-y-auto flex-1">
+            {@render children()}
+        </div>
+    </div>
+{/if}

daemon/web/src/lib/components/ReAnalyzeButton.svelte

@@ -19,7 +19,7 @@
         analysis_status === AnalysisStatus.Queued || analysis_status === AnalysisStatus.Running
     );
 
-    async function handleReAnalyze() {
+    async function handle_re_analyze() {
         // Update the entry directly for immediate UI feedback
         entry.analysis_status = AnalysisStatus.Queued;
         entry.analysis_report = undefined;
@@ -33,7 +33,7 @@
     loadingLabel="Analyzing..."
     disabled={is_processing}
     variant="blue"
-    onclick={handleReAnalyze}
+    onclick={handle_re_analyze}
     ariaLabel="re-analyze"
     errorMessage="Error re-analyzing recoding"
 >

daemon/web/src/lib/components/SystemStatsTable.svelte

@@ -1,13 +1,16 @@
 <script lang="ts">
     import { type SystemStats } from '$lib/systemStats';
+    import { gps_mode_label, GpsMode, type GpsData } from '$lib/utils.svelte';
     let {
         stats,
+        gps_data = null,
+        gps_mode = GpsMode.Disabled,
     }: {
         stats: SystemStats;
+        gps_data?: GpsData | null;
+        gps_mode?: GpsMode;
     } = $props();
 
-    const table_cell_classes = 'border p-1 lg:p-2';
-
     let battery_level = $derived(stats.battery_status ? stats.battery_status.level : 0);
     let bar_color = $derived.by(() => {
         if (stats.battery_status === undefined) {
@@ -36,31 +39,31 @@
 </script>
 
 <div
-    class="flex-1 drop-shadow p-4 flex flex-col gap-2 border rounded-md bg-gray-100 border-gray-100"
+    class="flex-1 drop-shadow-sm p-4 flex flex-col gap-2 border rounded-md bg-gray-100 border-gray-100"
 >
     <p class="text-xl mb-2">System Information</p>
-    <table class="table-auto border">
+    <table class="text-sm w-full">
         <tbody>
-            <tr class="border">
-                <th class={table_cell_classes}> Rayhunter Version </th>
-                <td class={table_cell_classes}>{stats.runtime_metadata.rayhunter_version}</td>
+            <tr class="border-b border-gray-200">
+                <td class="py-1 pr-4 text-gray-500 font-medium">Rayhunter Version</td>
+                <td class="py-1">{stats.runtime_metadata.rayhunter_version}</td>
             </tr>
-            <tr class="border">
-                <th class={table_cell_classes}> Storage </th>
-                <td class={table_cell_classes}>
+            <tr class="border-b border-gray-200">
+                <td class="py-1 pr-4 text-gray-500 font-medium">Storage</td>
+                <td class="py-1">
                     {stats.disk_stats.used_percent} used ({stats.disk_stats.used_size} used / {stats
                         .disk_stats.available_size} available)
                 </td>
             </tr>
-            <tr class="border-b">
-                <th class={table_cell_classes}> Memory (RAM) </th>
-                <td class={table_cell_classes}>
+            <tr class="border-b border-gray-200">
+                <td class="py-1 pr-4 text-gray-500 font-medium">Memory (RAM)</td>
+                <td class="py-1">
                     Free: {stats.memory_stats.free}, Used: {stats.memory_stats.used}
                 </td>
             </tr>
-            <tr class="border-b">
-                <th class={table_cell_classes}> Battery </th>
-                <td class={table_cell_classes}>
+            <tr class={gps_mode !== GpsMode.Disabled ? 'border-b border-gray-200' : ''}>
+                <td class="py-1 pr-4 text-gray-500 font-medium">Battery</td>
+                <td class="py-1">
                     <svg
                         width="80"
                         height="30"
@@ -70,7 +73,6 @@
                         class="battery-icon"
                     >
                         <title>{title_text}</title>
-                        <!-- Battery body -->
                         <rect
                             class="fill-none stroke-neutral-800 stroke-2"
                             width="70"
@@ -78,7 +80,6 @@
                             rx="3"
                             ry="3"
                         />
-                        <!-- Battery terminal -->
                         <rect
                             class="fill-neutral-800"
                             x="70"
@@ -88,7 +89,6 @@
                             rx="2"
                             ry="2"
                         />
-                        <!-- Battery charge bar -->
                         <rect
                             class={bar_color}
                             x="2"
@@ -99,14 +99,12 @@
                             style="width: {battery_level * 0.66}px;"
                         />
                         {#if stats.battery_status && stats.battery_status.is_plugged_in}
-                            <!-- Lightning bolt icon -->
                             <path
                                 class="fill-yellow-300 stroke-neutral-800 stroke-1"
                                 d="M38 3 L28 17 L34 17 L30 27 L40 13 L34 13 Z"
                             />
                         {/if}
                         {#if !stats.battery_status}
-                            <!-- Question mark icon -->
                             <text
                                 class="fill-neutral-500 text-[20px] font-bold [text-anchor:middle] [dominant-baseline:central]"
                                 x="35"
@@ -116,6 +114,27 @@
                     </svg>
                 </td>
             </tr>
+            {#if gps_mode !== GpsMode.Disabled}
+                <tr class="border-b border-gray-200">
+                    <td class="py-1 pr-4 text-gray-500 font-medium">GPS Mode</td>
+                    <td class="py-1">{gps_mode_label(gps_mode)}</td>
+                </tr>
+                {#if gps_data}
+                    <tr class="border-b border-gray-200">
+                        <td class="py-1 pr-4 text-gray-500 font-medium">Latitude</td>
+                        <td class="py-1 font-mono">{gps_data.latitude.toFixed(6)}</td>
+                    </tr>
+                    <tr>
+                        <td class="py-1 pr-4 text-gray-500 font-medium">Longitude</td>
+                        <td class="py-1 font-mono">{gps_data.longitude.toFixed(6)}</td>
+                    </tr>
+                {:else}
+                    <tr>
+                        <td class="py-1 pr-4 text-gray-500 font-medium">GPS Data</td>
+                        <td class="py-1 text-gray-400">Awaiting GPS data...</td>
+                    </tr>
+                {/if}
+            {/if}
         </tbody>
     </table>
 </div>

daemon/web/src/lib/components/UpdateNotice.svelte

@@ -0,0 +1,50 @@
+<script lang="ts">
+    import type { UpdateStatus } from '$lib/utils.svelte';
+
+    let { status = null }: { status: UpdateStatus | null } = $props();
+
+    let is_visible = $derived(
+        Boolean(status?.update_available && status.latest_version && status.latest_release_url)
+    );
+</script>
+
+{#if is_visible && status}
+    <div class="bg-sky-100 border-sky-300 drop-shadow-sm p-4 flex flex-col gap-2 border rounded-md">
+        <span class="text-xl font-bold flex flex-row items-center gap-2 text-sky-800">
+            <svg
+                class="w-6 h-6 text-sky-700"
+                aria-hidden="true"
+                xmlns="http://www.w3.org/2000/svg"
+                width="24"
+                height="24"
+                fill="currentColor"
+                viewBox="0 0 24 24"
+            >
+                <path
+                    fill-rule="evenodd"
+                    d="M2 12C2 6.477 6.477 2 12 2s10 4.477 10 10-4.477 10-10 10S2 17.523 2 12Zm11-4a1 1 0 1 0-2 0v5a1 1 0 1 0 2 0V8Zm-1 7a1 1 0 1 0 0 2h.01a1 1 0 1 0 0-2H12Z"
+                    clip-rule="evenodd"
+                />
+            </svg>
+            Software Update Available
+        </span>
+        <p>
+            A new version of Rayhunter is available! You are currently running version {status.current_version},
+            and the latest release is version {status.latest_version}.
+        </p>
+        <div class="flex flex-col gap-2 sm:flex-row sm:items-center sm:justify-between">
+            <span class="text-sm text-sky-900/80">
+                View the latest release on GitHub to see what's new and download the update.
+            </span>
+            <a
+                class="inline-flex items-center justify-center rounded-md bg-sky-700 px-4 py-2 text-white font-semibold hover:bg-sky-800"
+                href={status.latest_release_url}
+                target="_blank"
+                rel="noreferrer noopener"
+                aria-label="View latest release on GitHub"
+            >
+                View Release
+            </a>
+        </div>
+    </div>
+{/if}

daemon/web/src/lib/manifest.svelte.ts

@@ -1,5 +1,6 @@
 import { get_report, type AnalysisReport } from './analysis.svelte';
 import { AnalysisStatus, type AnalysisManager } from './analysisManager.svelte';
+import { GpsMode } from './utils.svelte';
 
 interface JsonManifest {
     entries: JsonManifestEntry[];
@@ -11,6 +12,9 @@ interface JsonManifestEntry {
     start_time: string;
     last_message_time: string;
     qmdl_size_bytes: number;
+    stop_reason: string | null;
+    upload_time: string | null;
+    gps_mode: GpsMode | null;
 }
 
 export class Manifest {
@@ -57,6 +61,9 @@ export class ManifestEntry {
     public analysis_size_bytes = $state(0);
     public analysis_status: AnalysisStatus | undefined = $state(undefined);
     public analysis_report: AnalysisReport | string | undefined = $state(undefined);
+    public stop_reason: string | undefined = $state(undefined);
+    public upload_time: Date | undefined = $state(undefined);
+    public gps_mode: GpsMode | undefined = $state(undefined);
 
     constructor(json: JsonManifestEntry) {
         this.name = json.name;
@@ -65,6 +72,15 @@ export class ManifestEntry {
         if (json.last_message_time) {
             this.last_message_time = new Date(json.last_message_time);
         }
+        if (json.stop_reason) {
+            this.stop_reason = json.stop_reason;
+        }
+        if (json.upload_time) {
+            this.upload_time = new Date(json.upload_time);
+        }
+        if (json.gps_mode !== null) {
+            this.gps_mode = json.gps_mode;
+        }
     }
 
     get_readable_qmdl_size(): string {

daemon/web/src/lib/ndjson.ts

@@ -19,7 +19,9 @@ export function parse_ndjson(input: string): NewlineDeliminatedJson {
             // however, if we've reached the end of the input, that means we
             // were given invalid nd-json
             if (lines.length === 0) {
-                throw new Error(`unable to parse invalid nd-json: ${e}, "${current_line}"`);
+                throw new Error(`unable to parse invalid nd-json: ${e}, "${current_line}"`, {
+                    cause: e,
+                });
             }
         }
     }

daemon/web/src/lib/stores/breakpoint.ts

@@ -5,7 +5,7 @@ import { breakpoints } from '../../theme';
 type Breakpoint = keyof typeof breakpoints;
 
 // Store that tracks if a specific breakpoint matches
-export function createBreakpointStore(breakpoint: Breakpoint): Readable<boolean> {
+export function create_breakpoint_store(breakpoint: Breakpoint): Readable<boolean> {
     return readable<boolean>(false, (set) => {
         const width = breakpoints[breakpoint];
         const mediaQuery = window.matchMedia(`(min-width: ${width})`);
@@ -23,7 +23,7 @@ export function createBreakpointStore(breakpoint: Breakpoint): Readable<boolean>
 }
 
 // Create stores for each breakpoint
-export const screenIsSmUp: Readable<boolean> = createBreakpointStore('sm');
-export const screenIsMdUp: Readable<boolean> = createBreakpointStore('md');
-export const screenIsLgUp: Readable<boolean> = createBreakpointStore('lg');
-export const screenIsXlUp: Readable<boolean> = createBreakpointStore('xl');
+export const screenIsSmUp: Readable<boolean> = create_breakpoint_store('sm');
+export const screenIsMdUp: Readable<boolean> = create_breakpoint_store('md');
+export const screenIsLgUp: Readable<boolean> = create_breakpoint_store('lg');
+export const screenIsXlUp: Readable<boolean> = create_breakpoint_store('xl');

daemon/web/src/lib/systemStats.ts

@@ -18,6 +18,7 @@ export interface DiskStats {
     available_size: string;
     used_percent: string;
     mounted_on: string;
+    available_bytes?: number;
 }
 
 export interface MemoryStats {

daemon/web/src/lib/utils.svelte.ts

@@ -10,31 +10,99 @@ export interface AnalyzerConfig {
     nas_null_cipher: boolean;
     incomplete_sib: boolean;
     test_analyzer: boolean;
+    diagnostic_analyzer: boolean;
 }
 
 export enum enabled_notifications {
     Warning = 'Warning',
     LowBattery = 'LowBattery',
+    Update = 'Update',
+}
+
+export interface WebdavConfig {
+    url: string;
+    username: string | null;
+    password: string | null;
+    upload_timeout_secs: number;
+    poll_interval_secs: number;
+    min_age_secs: number;
+    delete_on_upload: boolean;
+}
+
+export enum GpsMode {
+    Disabled = 0,
+    Fixed = 1,
+    Api = 2,
+}
+
+export function gps_mode_label(mode: GpsMode | undefined | null): string {
+    switch (mode) {
+        case GpsMode.Fixed:
+            return 'Fixed coordinates';
+        case GpsMode.Api:
+            return 'API endpoint';
+        default:
+            return 'Disabled';
+    }
 }
 
 export interface Config {
+    device: string;
     ui_level: number;
     colorblind_mode: boolean;
     key_input_mode: number;
-    ntfy_url: string;
+    ntfy_url: string | null;
     enabled_notifications: enabled_notifications[];
+    auto_check_updates: boolean;
     analyzers: AnalyzerConfig;
+    min_space_to_start_recording_mb: number;
+    min_space_to_continue_recording_mb: number;
+    wifi_ssid: string | null;
+    wifi_password: string | null;
+    wifi_security: 'wpa_psk' | 'sae' | null;
+    wifi_enabled: boolean;
+    dns_servers: string[] | null;
+    firewall_restrict_outbound: boolean;
+    firewall_allowed_ports: number[] | null;
+    webdav: WebdavConfig;
+    gps_mode: GpsMode;
+    gps_fixed_latitude: number | null;
+    gps_fixed_longitude: number | null;
 }
 
-export async function req(method: string, url: string): Promise<string> {
-    const response = await fetch(url, {
-        method: method,
-    });
-    const body = await response.text();
+export interface WifiStatus {
+    state: string;
+    ssid?: string;
+    ip?: string;
+    error?: string;
+}
+
+export interface WifiNetwork {
+    ssid: string;
+    signal_dbm: number;
+    security: string;
+}
+
+export async function get_wifi_status(): Promise<WifiStatus> {
+    return JSON.parse(await req('GET', '/api/wifi-status'));
+}
+
+export async function scan_wifi_networks(): Promise<WifiNetwork[]> {
+    return JSON.parse(await req('POST', '/api/wifi-scan'));
+}
+
+export async function req(method: string, url: string, json_body?: unknown): Promise<string> {
+    const options: RequestInit = { method };
+    if (json_body !== undefined) {
+        options.body = JSON.stringify(json_body);
+        options.headers = { 'Content-Type': 'application/json' };
+    }
+    const response = await fetch(url, options);
+    const responseBody = await response.text();
     if (response.status >= 200 && response.status < 300) {
-        return body;
+        return responseBody;
     } else {
-        throw new Error(body);
+        throw new Error(responseBody);
     }
 }
 
@@ -42,13 +110,13 @@ export async function req(method: string, url: string): Promise<string> {
 export async function user_action_req(
     method: string,
     url: string,
-    error_msg: string
+    error_msg: string,
+    json_body?: unknown
 ): Promise<string | undefined> {
     try {
-        return await req(method, url);
+        return await req(method, url, json_body);
     } catch (error) {
         if (error instanceof Error) {
-            console.log('beeeo');
             add_error(error, error_msg);
         }
         return undefined;
@@ -86,3 +154,55 @@ export async function set_config(config: Config): Promise<void> {
         throw new Error(error);
     }
 }
+
+export async function test_notification(): Promise<void> {
+    const response = await fetch('/api/test-notification', {
+        method: 'POST',
+    });
+
+    if (!response.ok) {
+        const error = await response.text();
+        throw new Error(error);
+    }
+}
+
+export interface TimeResponse {
+    system_time: string;
+    adjusted_time: string;
+    offset_seconds: number;
+}
+
+export interface UpdateStatus {
+    current_version: string;
+    latest_version?: string | null;
+    latest_release_url?: string | null;
+    update_available: boolean;
+    last_checked?: string | null;
+    last_error?: string | null;
+}
+
+export async function get_daemon_time(): Promise<TimeResponse> {
+    return JSON.parse(await req('GET', '/api/time'));
+}
+
+export async function get_update_status(): Promise<UpdateStatus> {
+    return JSON.parse(await req('GET', '/api/update-status'));
+}
+
+export interface GpsData {
+    latitude: number;
+    longitude: number;
+    /** Unix timestamp in seconds (0 = fixed/no real time). */
+    timestamp: number;
+}
+
+export async function get_gps(): Promise<GpsData | null> {
+    const response = await fetch('/api/gps', { cache: 'no-store' });
+    if (response.status === 404) {
+        return null;
+    }
+    if (response.status >= 200 && response.status < 300) {
+        return response.json();
+    }
+    throw new Error(await response.text());
+}

daemon/web/src/routes/+page.svelte

@@ -1,6 +1,15 @@
 <script lang="ts">
     import { ManifestEntry } from '$lib/manifest.svelte';
-    import { get_manifest, get_system_stats } from '$lib/utils.svelte';
+    import {
+        get_manifest,
+        get_system_stats,
+        get_update_status,
+        get_gps,
+        get_config,
+        GpsMode,
+        type UpdateStatus,
+        type GpsData,
+    } from '$lib/utils.svelte';
     import ManifestTable from '$lib/components/ManifestTable.svelte';
     import Card from '$lib/components/ManifestCard.svelte';
     import type { SystemStats } from '$lib/systemStats';
@@ -10,7 +19,9 @@
     import RecordingControls from '$lib/components/RecordingControls.svelte';
     import ConfigForm from '$lib/components/ConfigForm.svelte';
     import ActionErrors from '$lib/components/ActionErrors.svelte';
+    import ClockDriftAlert from '$lib/components/ClockDriftAlert.svelte';
     import LogView from '$lib/components/LogView.svelte';
+    import UpdateNotice from '$lib/components/UpdateNotice.svelte';
 
     let manager: AnalysisManager = new AnalysisManager();
     let loaded = $state(false);
@@ -20,6 +31,10 @@
     let system_stats: SystemStats | undefined = $state(undefined);
     let update_error: string | undefined = $state(undefined);
     let logview_shown: boolean = $state(false);
+    let config_shown: boolean = $state(false);
+    let gps_data: GpsData | null = $state(null);
+    let gps_mode: GpsMode = $state(GpsMode.Disabled);
+    let update_status: UpdateStatus | null = $state(null);
     $effect(() => {
         const interval = setInterval(async () => {
             try {
@@ -38,6 +53,16 @@
                 current_entry = new_manifest.current_entry;
 
                 system_stats = await get_system_stats();
+                // Allow update status to fail
+                try {
+                    update_status = await get_update_status();
+                } catch (error) {
+                    console.error('Error fetching update status:', error);
+                    update_status = null;
+                }
+                const config = await get_config();
+                gps_mode = config.gps_mode;
+                gps_data = await get_gps();
                 update_error = undefined;
                 loaded = true;
             } catch (error) {
@@ -54,7 +79,10 @@
 </script>
 
 <LogView bind:shown={logview_shown} />
-<div class="p-4 xl:px-8 bg-rayhunter-blue drop-shadow flex flex-row justify-between items-center">
+<ConfigForm bind:shown={config_shown} />
+<div
+    class="p-4 xl:px-8 bg-rayhunter-blue drop-shadow-sm flex flex-row justify-between items-center"
+>
     <!-- https://www.w3.org/WAI/tutorials/images/decorative/ -->
     <img src="/rayhunter_text.png" alt="" class="h-10 xl:h-12" />
     <div class="flex flex-row gap-4">
@@ -102,6 +130,34 @@
                 />
             </svg>
         </button>
+        <button onclick={() => (config_shown = true)} class="flex flex-row gap-1 group">
+            <span class="hidden text-white group-hover:text-gray-400 lg:flex">Config</span>
+            <svg
+                class="w-6 h-6 text-white group-hover:text-gray-400"
+                aria-hidden="true"
+                xmlns="http://www.w3.org/2000/svg"
+                width="24"
+                height="24"
+                fill="none"
+                viewBox="0 0 24 24"
+            >
+                <path
+                    stroke="currentColor"
+                    stroke-linecap="round"
+                    stroke-linejoin="round"
+                    stroke-width="2"
+                    d="M21 13v-2a1 1 0 0 0-1-1h-.757l-.707-1.707.535-.536a1 1 0 0 0 0-1.414l-1.414-1.414a1 1 0 0 0-1.414 0l-.536.535L14 5.757V5a1 1 0 0 0-1-1h-2a1 1 0 0 0-1 1v.757L8.293 6.464l-.536-.535a1 1 0 0 0-1.414 0L4.929 7.343a1 1 0 0 0 0 1.414l.535.536L4.757 11H4a1 1 0 0 0-1 1v2a1 1 0 0 0 1 1h.757l.707 1.707-.535.536a1 1 0 0 0 0 1.414l1.414 1.414a1 1 0 0 0 1.414 0l.536-.535L10 18.243V19a1 1 0 0 0 1 1h2a1 1 0 0 0 1-1v-.757l1.707-.707.536.535a1 1 0 0 0 1.414 0l1.414-1.414a1 1 0 0 0 0-1.414l-.535-.536.707-1.707H20a1 1 0 0 0 1-1Z"
+                />
+                <path
+                    stroke="currentColor"
+                    stroke-linecap="round"
+                    stroke-linejoin="round"
+                    stroke-width="2"
+                    d="M12 15a3 3 0 1 0 0-6 3 3 0 0 0 0 6Z"
+                />
+            </svg>
+        </button>
+        <div class="w-px bg-white/30 self-stretch"></div>
         <a
             class="flex flex-row gap-1 group"
             href="https://github.com/EFForg/rayhunter/issues"
@@ -148,12 +204,32 @@
                 />
             </svg>
         </a>
+        <a
+            class="flex flex-row gap-1 group"
+            href="https://supporters.eff.org/donate"
+            target="_blank"
+        >
+            <span class="hidden text-white group-hover:text-gray-400 lg:flex">Donate</span>
+            <svg
+                class="w-6 h-6 text-white group-hover:text-gray-400"
+                aria-hidden="true"
+                xmlns="http://www.w3.org/2000/svg"
+                width="24"
+                height="24"
+                fill="currentColor"
+                viewBox="0 0 24 24"
+            >
+                <path
+                    d="m12.75 20.66 6.184-7.098c2.677-2.884 2.559-6.506.754-8.705-.898-1.095-2.206-1.816-3.72-1.855-1.293-.034-2.652.43-3.963 1.537-1.31-1.108-2.67-1.571-3.962-1.537-1.515.04-2.823.76-3.72 1.855-1.806 2.2-1.924 5.821.753 8.705l6.184 7.098.245.281a.75.75 0 0 0 1.09 0l.246-.281Z"
+                />
+            </svg>
+        </a>
     </div>
 </div>
 <div class="m-4 xl:mx-8 flex flex-col gap-4">
     {#if update_error !== undefined}
         <div
-            class="bg-red-100 border-red-100 drop-shadow p-4 flex flex-col gap-2 border rounded-md flex-1 justify-between"
+            class="bg-red-100 border-red-100 drop-shadow-sm p-4 flex flex-col gap-2 border rounded-md flex-1 justify-between"
         >
             <span class="text-2xl font-bold mb-2 flex flex-row items-center gap-2 text-red-600">
                 <svg
@@ -175,7 +251,7 @@
             </span>
             <span
                 >This webpage is not currently receiving updates from your Rayhunter device. This
-                could be do loss of connection or some issue with your device.</span
+                could be due to loss of connection or some issue with your device.</span
             >
             {#if update_error}
                 <details>
@@ -186,6 +262,8 @@
         </div>
     {/if}
     <ActionErrors />
+    <ClockDriftAlert />
+    <UpdateNotice status={update_status} />
     {#if loaded}
         <div class="flex flex-col lg:flex-row gap-4">
             {#if current_entry}
@@ -197,7 +275,7 @@
                 />
             {:else}
                 <div
-                    class="bg-red-100 border-red-100 drop-shadow p-4 flex flex-col gap-2 border rounded-md flex-1 justify-between"
+                    class="bg-red-100 border-red-100 drop-shadow-sm p-4 flex flex-col gap-2 border rounded-md flex-1 justify-between"
                 >
                     <span
                         class="text-2xl font-bold mb-2 flex flex-row items-center gap-2 text-red-600"
@@ -227,7 +305,7 @@
                     </div>
                 </div>
             {/if}
-            <SystemStatsTable stats={system_stats!} />
+            <SystemStatsTable stats={system_stats!} {gps_data} {gps_mode} />
         </div>
         <div class="flex flex-col gap-2">
             <div class="flex flex-row gap-2">
@@ -243,14 +321,13 @@
                         type="checkbox"
                         id="filter_threshold"
                         bind:checked={filter_threshold}
-                        class="px-3 py-2 border border-gray-300 rounded-md focus:outline-none focus:ring-2 focus:ring-rayhunter-blue"
+                        class="px-3 py-2 border border-gray-300 rounded-md focus:outline-hidden focus:ring-2 focus:ring-rayhunter-blue"
                     />
                 </div>
             </div>
             <ManifestTable {entries} server_is_recording={!!current_entry} {manager} />
         </div>
         <DeleteAllButton />
-        <ConfigForm />
     {:else}
         <div class="flex flex-col justify-center items-center">
             <!-- https://www.w3.org/WAI/tutorials/images/decorative/ -->

daemon/web/tailwind.config.ts

@@ -1,19 +0,0 @@
-import type { Config } from 'tailwindcss';
-import { breakpoints } from './src/theme';
-
-export default {
-    content: ['./src/**/*.{html,js,svelte,ts}'],
-
-    theme: {
-        extend: {
-            colors: {
-                'rayhunter-blue': '#4e4eb1',
-                'rayhunter-dark-blue': '#3f3da0',
-                'rayhunter-green': '#94ea18',
-            },
-            screens: breakpoints,
-        },
-    },
-
-    plugins: [],
-} as Config;

daemon/web/vite.config.ts

@@ -1,11 +1,12 @@
 import { defineConfig } from 'vitest/config';
 import { sveltekit } from '@sveltejs/kit/vite';
+import tailwindcss from '@tailwindcss/vite';
 
 export default defineConfig({
     server: {
         proxy: {
             '/api': {
-                target: 'http://localhost:8080',
+                target: process.env.API_TARGET || 'http://localhost:8080',
                 changeOrigin: true,
                 secure: false,
                 configure: (proxy, _options) => {
@@ -26,7 +27,7 @@ export default defineConfig({
             },
         },
     },
-    plugins: [sveltekit()],
+    plugins: [tailwindcss(), sveltekit()],
     build: {
         // Force everything into one HTML file. SvelteKit will still generate
         // a lot of JS files but they are deadweight and will not be included

dist/config.toml.in

@@ -12,6 +12,7 @@ colorblind_mode = false
 # 1 = Subtle mode, display a colored line at the top of the screen when rayhunter is running (green=running, white=paused, red=warnings)
 # 2 = Demo Mode, display a fun orca gif
 # 3 = display the EFF logo
+# 4 = High Visibility mode, fill the entire screen with the status color (green=running, white=paused, red=warnings)
 #
 # TP-Link with one-bit display:
 # 0 = invisible mode
@@ -19,14 +20,57 @@ colorblind_mode = false
 ui_level = 1
 
 # 0 = rayhunter does not read button presses
-# 1 = double-tapping the power button starts/stops recordings
+# 1 = double-tapping the power button starts new recording
 key_input_mode = 0
 
 # If set, attempts to send a notification to the url when a new warning is triggered
-ntfy_url = ""
+# ntfy_url = "https://ntfy.sh/your-topic"
 # What notification types to enable. Does nothing if the above ntfy_url is not set.
 enabled_notifications = ["Warning", "LowBattery"]
 
+# If true, Rayhunter will periodically check GitHub for new releases and show
+# an update notice in the web UI.
+auto_check_updates = false
+
+# Disk Space Management
+# Minimum free space (MB) required to start recording
+min_space_to_start_recording_mb = 1
+# Minimum free space (MB) to continue recording (stops if below this)
+min_space_to_continue_recording_mb = 1
+
+# WiFi Client Mode
+# Toggle wifi_enabled to connect the device to an existing WiFi network.
+# Credentials are stored separately in wpa_sta.conf and managed via the web UI.
+wifi_enabled = false
+
+# DNS servers to use when WiFi client mode is active.
+# Defaults to ["9.9.9.9", "149.112.112.112"] (Quad9) if not specified.
+# dns_servers = ["9.9.9.9", "149.112.112.112"]
+
+# WebDAV Upload
+# If a [webdav] section is present, finished recordings (both the raw .qmdl file
+# and its .ndjson analysis output) are uploaded in the background to a WebDAV
+# server once they've been closed for at least min_age_secs. After a successful
+# upload the entry is either marked as uploaded in the manifest, or deleted
+# locally if delete_on_upload = true. With no [webdav] section, no upload
+# worker runs.
+#
+# [webdav]
+# url = "https://dav.example.com/rayhunter"
+# # HTTP Basic auth. Both fields are optional; a password without a username is
+# # rejected and the request is sent unauthenticated.
+# username = "user"
+# password = "pass"
+# # Timeout in seconds for each upload request (default 300).
+# upload_timeout_secs = 300
+# # How often the worker scans for eligible entries (default 3600).
+# poll_interval_secs = 3600
+# # Minimum age in seconds before an entry becomes eligible for upload
+# # (default 86400 = 1 day).
+# min_age_secs = 86400
+# # Delete the entry locally after a successful upload (default false).
+# delete_on_upload = false
+
 # Analyzer Configuration
 # Enable/disable specific IMSI catcher detection heuristics
 # See https://github.com/EFForg/rayhunter/blob/main/doc/heuristics.md for details
@@ -38,3 +82,4 @@ null_cipher = true
 nas_null_cipher = true
 incomplete_sib = true
 test_analyzer = false
+diagnostic_analyzer = true

doc/SUMMARY.md

@@ -1,6 +1,8 @@
 # Summary
 
-[Introduction](./introduction.md)
+- [Introduction](./introduction.md)
+- [Support, feedback, and community](./support-feedback-community.md)
+- [Frequently Asked Questions](./faq.md)
 - [Installation](./installation.md)
   - [Installing from the latest release](./installing-from-release.md)
   - [Installing from source](./installing-from-source.md)
@@ -12,6 +14,7 @@
   - [Re-analyzing recordings](./reanalyzing.md)
   - [How we analyze a capture](./analyzing-a-capture.md)
 - [Supported devices](./supported-devices.md)
+  - [Porting to new devices](./porting.md)
   - [Orbic/Kajeet RC400L](./orbic.md)
   - [TP-Link M7350](./tplink-m7350.md)
   - [TP-Link M7310](./tplink-m7310.md)
@@ -20,5 +23,4 @@
   - [Wingtech CT2MHS01](./wingtech-ct2mhs01.md)
   - [PinePhone and PinePhone Pro](./pinephone.md)
   - [Moxee Hotspot](./moxee.md)
-- [Support, feedback, and community](./support-feedback-community.md)
-  - [Frequently Asked Questions](./faq.md)
+- [REST API Documentation](./api-docs.md)

doc/api-docs.md

@@ -0,0 +1,5 @@
+# REST API Documentation
+
+The rayhunter daemon has [REST API documentation](./api-docs/) available in the interactive swagger-ui.
+
+>**Note:** API endpoints are subject to change as needs arise, though we will try to keep them as stable as possible and notify about breaking changes in the changelogs for new versions.

doc/configuration.md

@@ -9,15 +9,97 @@ Through web UI you can set:
   - *Invisible mode*: Rayhunter does not show anything on the built-in screen
   - *Subtle mode (colored line)*: Rayhunter shows green line if there are no warnings, red line if there are warnings (warnings could be checked through web UI) and white line if Rayhunter is not recording.
   - *Demo mode (orca gif)*, which shows image of orcas *and* colored line.
-  - *EFF logo*, which shows EFF logo and *and* colored line.
+  - *EFF logo*, which shows EFF logo *and* colored line.
+  - *High visibility (full screen color)*: fills the entire screen with the status color (green for recording, red for warnings, white for paused).
 - **Device Input Mode**, which defines behavior of built-in power button of the device. *Device Input Mode* could be:
   - *Disable button control*: built-in power button of the device is not used by Rayhunter.
-  - *Double-tap power button to start/stop recording*: double clicking on a built-in power button of the device stops and immediately restarts the recording. This could be useful if Rayhunter's heuristics is triggered and you get the red line, and you want to "reset" the past warnings. Normally you can do that through web UI, but sometimes it is easier to double tap on power button.
+  - *Double-tap power button to start new recording*: double clicking on a built-in power button of the device stops and immediately restarts the recording. This could be useful if Rayhunter's heuristics is triggered and you get the red line, and you want to "reset" the past warnings. Normally you can do that through web UI, but sometimes it is easier to double tap on power button.
 - **Colorblind Mode** enables color blind mode (blue line is shown instead of green line, red line remains red). Please note that this does not cover all types of color blindness, but switching green to blue should be about enough to differentiate the color change for most types of color blindness.
+- **Automatically check for software updates** enables periodic checks against the Rayhunter GitHub releases page. When a newer release is found, the web UI shows a notice and, if ntfy update notifications are enabled, a notification is sent.
 - **ntfy URL**, which allows setting a [ntfy](https://ntfy.sh/) URL to which notifications of new detections will be sent. The topic should be unique to your device, e.g., `https://ntfy.sh/rayhunter_notifications_ba9di7ie` or `https://myserver.example.com/rayhunter_notifications_ba9di7ie`. The ntfy Android and iOS apps can then be used to receive notifications. More information can be found in the [ntfy docs](https://docs.ntfy.sh/).
 - **Enabled Notification Types** allows enabling or disabling the following types of notifications:
   - *Warnings*, which will alert when a heuristic is triggered. Alerts will be sent at most once every five minutes.
   - *Low Battery*, which will alert when the device's battery is low. Notifications may not be supported for all devices—you can check if your device is supported by looking at whether the battery level indicator is functioning on the System Information section of the Rayhunter UI.
+  - *Software Updates*, which will alert when a new Rayhunter release is available. Only triggers when *Automatically check for software updates* is enabled.
 - With **Analyzer Heuristic Settings** you can switch on or off built-in [Rayhunter heuristics](heuristics.md). Some heuristics are experimental or can trigger a lot of false positive warnings in some networks (our tests have shown that some heuristics have different behavior in US or European networks). In that case you can decide whether you would like to have the heuristics that trigger a lot of false positives on or off. Please note that we are constantly improving and adding new heuristics, so a new release may reduce false positives in existing heuristics as well.
 
+## GPS
+
+The **GPS Settings** allows you to attach GPS-based location history to every recording. Data is stored as a separate JSON file next to QMDL, and also inlined into the PCAP file as packet comment.
+
+The modes are:
+
+- *Disabled*, the default option, disables this feature entirely.
+
+- *Fixed*, for hardcoding latitude (-90 to 90) and longitude (-180 to 180) for devices that don't move very often or at all. Every packet in the recording will have that location.
+
+- *API Endpoint*, enables the `POST /api/gps` endpoint so that third-party tools (i.e. your own scripts) can update location info continuously. Please refer to the [API documentation](api-docs.md) for more info.
+
+The GPS data is stored as a separate JSON file next to QMDL captures, and contains its own timestamps. These timestamps are meant to be compared during analysis with the packet timestamp so we know the time difference between the packet capture from the GPS capture, if there is any, since GPS data and packet data may come from two entirely separate devices.
+
+## WiFi Client Mode
+
+On the **Orbic**, **Moxee**, **UZ801**, **TMOHS1**, and **Wingtech**, Rayhunter can connect the device to an existing WiFi network while keeping the hotspot running. This gives the device internet access for [notifications](https://docs.ntfy.sh/) and lets you reach the web UI from any device on that network.
+
+- **Enable WiFi** turns WiFi client mode on or off. Disabling it does not erase saved credentials.
+- **Scan** searches for nearby networks. Select one from the dropdown, or type an SSID manually.
+- **Password** is required for WPA/WPA2 networks. The password is stored separately from `config.toml` (in `wpa_sta.conf` on the device) and is never exposed through the API.
+- **DNS Servers** lets you override the DNS servers used when connected. Defaults to `9.9.9.9` and `149.112.112.112` (Quad9) if not set.
+
+After saving, the connection status will show **connecting**, **connected** (with the assigned IP address), or **failed** (with an error message). If the connection fails, check that the SSID and password are correct and that the network is in range.
+
+### Crash Recovery
+
+The WiFi kernel module (`wlan.ko`) can occasionally crash or unload, taking both the hotspot and client interfaces down with it. Rayhunter includes a watchdog that detects this and automatically reloads the module, restarts the hotspot, and reconnects to the configured network. During recovery the WiFi status will show **recovering**.
+
+On the first detection of a crash, a diagnostic snapshot is saved to `/data/rayhunter/crash-logs/` on the device. You can pull these logs with `adb pull /data/rayhunter/crash-logs/` and inspect them to understand what went wrong. Each log contains:
+
+- **dmesg** output (kernel messages). Look for backtraces, `BUG:`/`Oops:` lines, or `wlan`/`wcnss` errors. The kernel ring buffer is small and gets overwritten quickly, so crash details may already be gone if the crash happened well before detection.
+- **/proc/modules** snapshot. If `wlan` is absent, the module fully unloaded. If present but interfaces are gone, the driver is stuck.
+- **ip addr** output confirming which network interfaces existed at snapshot time.
+- **ps** output showing which WiFi-related processes (`hostapd`, `wpa_supplicant`, `wland`) were still running.
+
+If recovery fails after 5 attempts, the status will change to **failed**. A reboot of the device will reset WiFi.
+
+You can also configure WiFi during installation:
+
+```sh
+./installer orbic --admin-password 'mypassword' --wifi-ssid 'MyNetwork' --wifi-password 'networkpass'
+```
+
+## WebDAV Upload
+
+Rayhunter can automatically upload finished recordings to a WebDAV server. When a `[webdav]` section is present in `config.toml`, a background worker periodically scans the recording store and uploads any closed entry that is older than `min_age_secs`. Each eligible entry uploads two files: the raw `.qmdl` capture and its `.ndjson` analysis output. After a successful upload the entry is either marked as uploaded in the manifest (and skipped on subsequent polls), or deleted locally if `delete_on_upload = true`. With no `[webdav]` section, no upload worker runs.
+
+WebDAV upload is currently configurable only by editing `config.toml` — there is no web UI control for it yet.
+
+| Key | Required | Default | Description |
+| --- | --- | --- | --- |
+| `url` | yes | — | WebDAV server base URL, e.g. `https://example.com/remote.php/files/user/rayhunter/` |
+| `username` | no | — | HTTP Basic auth username |
+| `password` | no | — | HTTP Basic auth password |
+| `upload_timeout_secs` | no | `300` | Timeout (seconds) for each upload request |
+| `poll_interval_secs` | no | `3600` | How often (seconds) the worker scans for eligible entries |
+| `min_age_secs` | no | `86400` | Minimum age (seconds) an entry must have before it becomes eligible for upload |
+| `delete_on_upload` | no | `false` | Delete the entry locally after a successful upload |
+
+Example:
+
+```toml
+[webdav]
+url = "https://dav.example.com/rayhunter/"
+username = "user"
+password = "pass"
+upload_timeout_secs = 300
+poll_interval_secs = 3600
+min_age_secs = 86400
+delete_on_upload = false
+```
+
+A few notes on behavior:
+
+- **Auth:** HTTP Basic. Supplying a `password` without a `username` is rejected — the request is sent unauthenticated and a warning is logged.
+- **Retries and overwrites:** each entry's two files (`.qmdl` and `.ndjson`) must both upload successfully before the entry is marked as uploaded in the manifest. If one upload fails, the entry stays unmarked and both files are retried on the next poll — the one that previously succeeded will be overwritten on the server. Once an entry is marked as uploaded, Rayhunter will not upload it again.
+- **Currently-recording entry:** the active recording is never uploaded; only closed entries are eligible.
+
 If you prefer editing `config.toml` file, you need to obtain a shell on your [Orbic](./orbic.md#obtaining-a-shell) or [TP-Link](./tplink-m7350.md#obtaining-a-shell) device and edit the file manually. You can view the [default configuration file on GitHub](https://github.com/EFForg/rayhunter/blob/main/dist/config.toml.in).

doc/custom.css

@@ -0,0 +1,6 @@
+.warning-box {
+    padding: 0.75em 1em;
+    border-left: 4px solid #e33;
+    border-radius: 4px;
+    background-color: color-mix(in srgb, currentColor 10%, transparent);
+}

doc/faq.md

@@ -22,37 +22,60 @@ Please note that this file may contain sensitive information such as your IMSI a
 
 If you want to use a non-Verizon SIM card you will probably need an unlocked device. But it's not clear which devices are locked nor how to unlock them, we welcome any experimentation and information regarding the use of unlocked devices. So far most verizon branded orbic devices we have encountered are actually unlocked.
 
+### I can't reach my Rayhunter's web UI after leaving it alone for a while
+
+Some hotspots (notably the T-Mobile TMOHS1 and Wingtech CT2MHS01) shut down their Wi-Fi access point after about 10 minutes with no connected clients to save battery. Rayhunter is still recording in the background, but you won't be able to reach the web UI until you power cycle the device or reconnect a client while Wi-Fi is still up.
+
+To avoid this, set Wi-Fi Standby to "Always on" in the hotspot's native admin UI. See [TMOHS1](./tmobile-tmohs1.md#wi-fi-auto-shutdown) or [CT2MHS01](./wingtech-ct2mhs01.md#wi-fi-auto-shutdown) for step-by-step instructions.
+
 ### How do I re-enable USB tethering after installing Rayhunter?
 
-Make sure USB tethering is also enabled in the Orbic's UI, and then run the following commands:
+If you have installed with `./installer orbic-usb`, you might find that USB
+tethering is now disabled. If you have run `./installer orbic`, this section is not
+relevant as it does not use or touch USB.
+
+[First obtain a shell](./orbic.md#shell), then:
+
 
 ```sh
-./installer util shell "echo 9 > /usrdata/mode.cfg"
-./installer util shell reboot
+# inside of Orbic's shell:
+echo 9 > /usrdata/mode.cfg
+reboot
 ```
 
+Make sure USB tethering is also enabled in the Orbic's UI.
+
 To disable tethering again:
 
 ```sh
-./installer util shell "echo 3 > /usrdata/mode.cfg"
-./installer util shell reboot
+# inside of Orbic's shell:
+echo 3 > /usrdata/mode.cfg
+reboot
 ```
 
 See `/data/usb/boot_hsusb_composition` for a list of USB modes and Android USB gadget settings.
 
 
+### How do I connect my device to an existing WiFi network?
+
+The Orbic, Moxee, UZ801, and TMOHS1 can connect to a nearby WiFi network while still running their own hotspot. This gives the device internet access for ntfy notifications and lets you reach the web UI from your home network. See [WiFi Client Mode](./configuration.md#wifi-client-mode) in the configuration guide for setup instructions.
+
+### WiFi client mode is connected but I can't reach the internet
+
+Check that the **DNS Servers** field in the config has valid entries (the default is `9.9.9.9` and `149.112.112.112`). If your home network and the device hotspot use the same subnet (for example, both are on `192.168.1.x`), try restarting the daemon by saving the config again from the web UI.
+
 ### How do I disable the WiFi hotspot on the Orbic RC400L?
 
-To disable both WiFi bands:
+To disable both WiFi bands, [first obtain a shell](./orbic.md#shell), then:
 
 ```sh
-adb shell
-/bin/rootshell -c "sed -i 's/<wlan><Feature><state>1<\/state>/<wlan><Feature><state>0<\/state>/g' /usrdata/data/usr/wlan/wlan_conf_6174.xml && reboot"
+# inside of Orbic's shell:
+sed -i 's/<wlan><Feature><state>1<\/state>/<wlan><Feature><state>0<\/state>/g' /usrdata/data/usr/wlan/wlan_conf_6174.xml && reboot
 ```
 
 To re-enable WiFi:
 
 ```sh
-adb shell
-/bin/rootshell -c "sed -i 's/<wlan><Feature><state>0<\/state>/<wlan><Feature><state>1<\/state>/g' /usrdata/data/usr/wlan/wlan_conf_6174.xml && reboot"
+# inside of Orbic's shell:
+sed -i 's/<wlan><Feature><state>0<\/state>/<wlan><Feature><state>1<\/state>/g' /usrdata/data/usr/wlan/wlan_conf_6174.xml && reboot
 ```

doc/heuristics.md

@@ -39,7 +39,7 @@ This heuristic will also issue a notification every time your identity is sent t
 This analyzer tests if a base station releases your device's connection and redirects your device to a 2G base station. This heuristic is useful, because some IMSI catchers may operate in a such way that they downgrade connection to 2G where they can intercept the communication (by performing man-in-the-middle attack).
 
 
-### LTE SIB6/7 Downgrade
+### LTE SIB6/7 Downgrade (v2)
 
 This analyzer tests if LTE base station is broadcasting a SIB type 6 and 7 messages which include 2G/3G frequencies with higher priorities.
 
@@ -49,7 +49,7 @@ This attack exploits the fact that SIB broadcast messages are not encrypted or a
 
 SIB6 is used for cell reselection to CDMA2000 systems which are not supported by many modern mobile phones, and SIB7 Provides the mobile device with information to perform cell reselection to GSM/EDGE networks. Therefore SIB6 messages are quite rare, while malformed SIB7 messages are much more frequent in practice. 
 
-This heuristic is the most useful in the United States or other countries where there are no more operating 2G base stations. See [Wikipedia page on past 2G networks](https://en.wikipedia.org/wiki/2G#Past_2G_networks) for information about your country. In countries where 2G is still in service (such as most of EU), this heuristic may trigger false positives. In that case you should consider disabling it. However this heuristic has been vastly improved to reduce false positive warnings and new tests in European networks show that false positives are vastly reduced.
+This heuristic is useful even in countries where 2g is still prevalent. A well behaved tower should always advertise its other 4g neighbors at a higher priority than 2g/3g neighbors. (Older versions of this heuristic were prone to false positives.)
 
 ### Null Cipher
 
@@ -73,6 +73,9 @@ This analyzer tests whether the SIB1 message contains a complete SIB chain (SIB3
 
 On its own this might just be a misconfigured base station (though we have only seen it in the wild under suspicious circumstances) but combined with other heuristics such as **IMSI Requested** detection it should be considered as a strong indicator of malicious activity.
 
+### Diagnostic Information 
+This analyzer displays some diagnostic information about when your device connects and disconnects from certain towers. It is helpful for analysis of suspicious PCAPs. The informational warnings in here can safely be ignored until there is a low, medium, or high severity warning. 
+
 ### Test Analyzer
 
 This analyzer is great for testing if your Rayhunter installation works. It will alert every time a new tower is seen (specifically every time a tower broadcasts a SIB1 message.) It is designed to be very noisy so we do not recommend leaving it on but if this alerts it means your Rayhunter device is working! 

doc/installing-from-release.md

@@ -41,23 +41,21 @@ Make sure you've got one of Rayhunter's [supported devices](./supported-devices.
    ```bash
    # For Orbic:
    ./installer orbic --admin-password 'mypassword'
-   # Or install over USB if you want ADB and a root shell (not recommended for most users)
-   ./installer orbic-usb
+
+   # Note: the arguments --admin-username 'myusername' and --admin-ip 'mydeviceip'
+   #       may be required if different from the default.
 
    # For TP-Link:
    ./installer tplink
    ```
 
-   * On Verizon Orbic, the password is the WiFi password.
-   * On Kajeet/Smartspot devices, the default password is `$m@rt$p0tc0nf!g`
-   * On Moxee-brand devices, check under the battery for the password.
-   * You can reset the password by pressing the button under the back case until the unit restarts.
-
-   TP-Link does not require an `--admin-password` parameter.
+   * On Verizon Orbic, the default password is the WiFi password. You can reset the password by pressing the button under the back case until the unit restarts.
+      * ***Note:*** If you have changed the device username, password, or IP address from their default values, these must be provided as arguments to the installer command above.
+   * TP-Link does not require an `--admin-password` parameter.
 
    For other devices, check `./installer --help` or the
    respective page in the sidebar under "Supported
-   Devices."
+   Devices" for the installation command.
 
 7. The installer will eventually tell you it's done, and the device will reboot.
 

doc/installing-from-source.md

@@ -1,64 +1,113 @@
 # Installing from source
 
-Building Rayhunter from source, either for development or because the install script doesn't work on your system, involves a number of external dependencies. Unless you need to do this, we recommend you use our [compiled builds](https://github.com/EFForg/rayhunter/releases).
+Building Rayhunter from source, either for development or otherwise, involves a
+number of external dependencies. Unless you need to do this, we recommend you
+use our [compiled builds](https://github.com/EFForg/rayhunter/releases).
 
-* Install [nodejs/npm](https://docs.npmjs.com/downloading-and-installing-node-js-and-npm), which is required to build Rayhunter's web UI
-  * Make sure to build the site with `pushd daemon/web && npm install && npm run build && popd` before building Rayhunter. If you're working directly on the frontend, `npm run dev` will allow you to test a local frontend with hot-reloading (use `http://localhost:5173` instead of `http://localhost:8080`).
-* Install ADB on your computer using the instructions above, and make sure it's in your terminal's PATH
-  * You can verify if ADB is in your PATH by running `which adb` in a terminal. If it prints the filepath to where ADB is installed, you're set! Otherwise, try following one of these guides:
-    * [linux](https://askubuntu.com/questions/652936/adding-android-sdk-platform-tools-to-path-downloaded-from-umake)
-    * [macOS](https://www.repeato.app/setting-up-adb-on-macos-a-step-by-step-guide/)
-    * [Windows](https://medium.com/@yadav-ajay/a-step-by-step-guide-to-setting-up-adb-path-on-windows-0b833faebf18)
-* Install `curl` on your computer to run the install scripts. It is not needed to build binaries.
+At a high level, we have:
 
-### Install Rust targets
+* A JS frontend written in SvelteKit (`./daemon/web/`)
+* A Rust binary `rayhunter-daemon` (`./daemon/`) that runs on the device, and bundles the frontend.
+* A Rust binary `installer` (`./installer`) that runs on the computer and bundles `rayhunter-daemon`.
 
-[Install Rust the usual way](https://www.rust-lang.org/tools/install). Then,
+It's recommended to work either on Mac/Linux, or WSL on Windows.
 
-- install the cross-compilation target for the device Rayhunter will run on:
-```sh
-rustup target add armv7-unknown-linux-musleabihf
-```
+## Building frontend and backend
 
-- install the statically compiled target for your host machine to build the binary installer `serial`.
-```sh
-# check which toolchain you have installed by default with
-rustup show
-# now install the correct variant for your host platform, one of:
-rustup target add aarch64-unknown-linux-musl
-rustup target add armv7-unknown-linux-musleabi
-rustup target add x86_64-unknown-linux-musl
-rustup target add aarch64-apple-darwin
-rustup target add x86_64-apple-darwin
-rustup target add x86_64-pc-windows-gnu
-```
+First, install dependencies:
 
-Now you can root your device and install Rayhunter by running:
+- [Rust](https://www.rust-lang.org/tools/install)
+- [Node.js/npm](https://docs.npmjs.com/downloading-and-installing-node-js-and-npm)
+- C compiler tools (`apt install build-essential` on Linux, `xcode-select --install` on Mac)
+
+Then you can build everything with:
 
 ```sh
-# Build the daemon binary for local development (rustcrypto TLS backend, fast compilation)
-# WARNING: The rustcrypto library, though not known to be insecure, is less well
-# tested than its counterpart and could potentially have severe issues in
-# its cryptographic implementation. We therefore recommend using ring-tls in
-# production builds (see below)
-cargo build-daemon-firmware-devel
-
-# To build it exactly like in CI (more mature ring TLS backend, slower compilation)
-# CC_armv7_unknown_linux_musleabihf=arm-linux-gnueabihf-gcc cargo build-daemon-firmware
-
-# Build rootshell
-cargo build -p rootshell --bin rootshell --target armv7-unknown-linux-musleabihf --profile firmware
-
-# Replace 'orbic' with your device type if different.
-# A list of possible values can be found with 'cargo run --bin installer help'.
-# Use FILE_RAYHUNTER_DAEMON to specify the daemon binary path when using development builds:
-FILE_RAYHUNTER_DAEMON=$PWD/target/armv7-unknown-linux-musleabihf/firmware-devel/rayhunter-daemon cargo run -p installer --bin installer orbic
+./scripts/build-dev.sh
+./scripts/install-dev.sh orbic  # replace 'orbic' with your device type
 ```
 
-### If you're on Windows or can't run the install scripts
+## Running the daemon on your PC
 
-* Root your device on Windows using the instructions here: <https://xdaforums.com/t/resetting-verizon-orbic-speed-rc400l-firmware-flash-kajeet.4334899/#post-87855183>
-* Build the web UI using `cd daemon/web && npm install && npm run build`
-* Push the scripts in `scripts/` to `/etc/init.d` on device and make a directory called `/data/rayhunter` using `adb shell` (and sshell for your root shell if you followed the steps above)
-* You also need to copy `config.toml.in` to `/data/rayhunter/config.toml`. Uncomment the `device` line and set the value to your device type if necessary.
-* Then run `./make.sh`, which will build the binary, push it over adb, and restart the device. Once it's restarted, Rayhunter should be running!
+If you don't have a target device handy, you can run `rayhunter-daemon` on your
+PC with `debug_mode = true`. This skips DIAG, the device display, key input,
+the battery worker, and the WiFi client, so recording-related endpoints will
+not work, but the frontend and read-only APIs do.
+
+```sh
+mkdir -p ./qmdl && printf 'entries = []\n' > ./qmdl/manifest.toml
+cat > config.toml <<'EOF'
+qmdl_store_path = "./qmdl"
+port = 8080
+debug_mode = true
+EOF
+cargo run -p rayhunter-daemon -- ./config.toml
+```
+
+Open `http://127.0.0.1:8080`.
+
+## Hot-reloading the frontend
+
+If you are working on the frontend, you normally have to repeat all of the above steps everytime to see a change.
+
+You can instead run the frontend separately on your PC while the Rust parts
+continue running on your target device:
+
+```sh
+cd daemon/web
+
+# Assumes rayhunter-daemon is listening on localhost:8080
+npm run dev
+
+# Use a custom target IP:port where the backend runs
+API_TARGET=http://192.168.1.1:8080 npm run dev
+```
+
+The UI will listen on `localhost:5173` and instantly show any frontend changes
+you make. Backend changes require building everything from the top (daemon and installer).
+
+## Installer utils, getting a shell
+
+Check `./scripts/install-dev.sh util --help`
+for useful utilities for transferring files, opening shells. The exact tools
+available wildly depend on the device you're working on, and they are
+usually documented the relevant device's page under [Supported
+Devices](./supported-devices.md).
+
+A lot of devices run a trimmed down version of Android and have ADB (Android
+Debug Bridge) support. The USB-based installers (`orbic-usb`, `pinephone`,
+`uz801`) use ADB to perform the installation.
+
+You might want to install and use actual ADB to connect to the device, push
+files and generally poke around. The installer contains some tools to enable ADB:
+
+```sh
+adb kill-server
+
+# Enables ADB on either of these devices
+./scripts/install-dev.sh util tmobile-start-adb
+./scripts/install-dev.sh orbic-usb
+
+adb shell
+```
+
+Note though that we can't assist with any issues setting ADB up, _especially
+not_ on Windows. There have been too many driver issues to make this the
+"golden path" for most users or contributors. There have been instances where
+people managed to brick their orbic devices using ADB on Windows.
+
+## Troubleshooting
+
+You may need to turn off your VPN in order to load the frontend succesfully - even with local network sharing enabled, VPNs can interfere with the connection to the backend.
+
+Specifically for WSL users:
+
+- The HyperV firewall also tends to interfere with the connection between frontend and backend. You can turn it off in your WSL settings.
+
+- WSL2 has a known compatibility issue which may prevent vite from detecting file system changes and therefore affects HMR (hot module replacement).
+If your hot reloading does not work, some have success using polling to detect changes. To do so, specify the following setting in vite.config.ts:
+```ts
+server: {
+    watch: { usePolling: true }
+}
+```

doc/moxee.md

@@ -5,6 +5,8 @@ Supported in Rayhunter since version 0.6.0.
 The Moxee Hotspot is a device very similar to the Orbic RC400L. It seems to be
 primarily for the US market.
 
+**These devices have relatively little storage. The Orbic is usually a better alternative, though might be more expensive.**
+
 - [KonnectONE product page](https://www.konnectone.com/specs-hotspot)
 - [Moxee product page](https://www.moxee.com/hotspot)
 
@@ -25,18 +27,30 @@ According to [FCC ID 2APQU-K779HSDL](https://fcc.report/FCC-ID/2APQU-K779HSDL),
 | 66   | 1700/2100 MHz (E-AWS)   |
 | 71   | 600 MHz                 |
 
-## Installation
+## Installing
 
-Connect to the hotspot's network using WiFi or USB tethering and run:
+To get started, follow the [release installation guide](./installing-from-release.md). Then run the installer with the following command:
 
-```sh
-./installer orbic --admin-password 'mypassword'
+```bash
+./installer moxee --admin-password 'mypassword'
+
+# Note: the arguments --admin-username 'myusername' and --admin-ip 'mydeviceip'
+#       may be required if different from the default.
 ```
 
-The password (in place of `mypassword`) is under the battery.
+* The password is the one used to log in to the device's admin menu. You can reset the password by pressing the button under the back case until the unit restarts.
+   * ***Note:*** If you have changed the device username, password, or IP address from their default values, these must be provided as arguments to the installer command above.
+* On Moxee-brand devices, check under the battery for the password.
+* `./installer moxee` is almost the same as `./installer orbic`, it just comes with slightly better defaults that will give you more space for recordings. 
 
+The Rayhunter UI will be available at <http://192.168.1.1:8080>.
+
+<a name=shell></a>
 ## Obtaining a shell
 
-```sh
+After running the installer, there will not be a root shell and ADB will not be
+enabled. Instead, you can use:
+
+```bash
 ./installer util orbic-shell
 ```

doc/orbic.md

@@ -6,7 +6,8 @@ It is also sometimes sold under the brand Kajeet RC400L. This is the exact same
 
 You can buy an Orbic [using bezos
 bucks](https://www.amazon.com/Orbic-Verizon-Hotspot-Connect-Enabled/dp/B08N3CHC4Y),
-or on [eBay](https://www.ebay.com/sch/i.html?_nkw=orbic+rc400l).
+or on [eBay](https://www.ebay.com/sch/i.html?_nkw=orbic+rc400l). You should not
+pay more than 30 USD for such a device (without shipping).
 
 [Please check whether the Orbic works in your country](https://www.frequencycheck.com/countries/), and whether the Orbic RC400L supports the right frequency bands for your purpose before buying.
 
@@ -21,6 +22,10 @@ or on [eBay](https://www.ebay.com/sch/i.html?_nkw=orbic+rc400l).
 | Wifi 5Ghz | a/ac/ax |
 | Wifi 6 | 🮱 |
 
+## WiFi client mode
+
+The Orbic's QCA6174 radio supports running the hotspot and connecting to an external WiFi network at the same time. See [WiFi Client Mode](./configuration.md#wifi-client-mode) for setup.
+
 ## Two kinds of installers
 
 The orbic's installation routine underwent many different changes:
@@ -37,10 +42,41 @@ The orbic's installation routine underwent many different changes:
 It's possible that many tutorials out there still refer to some of the old
 installation routines.
 
+## Installing
+
+To get started, follow the [release installation guide](./installing-from-release.md). Then run the installer with the following command:
+
+
+```bash
+# For Orbic:
+./installer orbic --admin-password 'mypassword'
+
+# For Kajeet/Smartspot:
+./installer orbic --admin-password '$m@rt$p0tc0nf!g'
+
+# Note: the arguments --admin-username 'myusername' and --admin-ip 'mydeviceip'
+#       may be required if different from the default.
+
+# Or install over USB if you want ADB and a root shell (not recommended for most users)
+./installer orbic-usb
+```
+
+* The password is the one used to log in to the device's admin menu. You can reset the password by pressing the button under the back case until the unit restarts.
+   * ***Note:*** If you have changed the device username, password, or IP address from their default values, these must be provided as arguments to the installer command above.
+* On Verizon Orbic, the default password is the WiFi password.
+* On Kajeet/Smartspot devices, the default password is `$m@rt$p0tc0nf!g`
+
+The Rayhunter UI will be available at <http://192.168.1.1:8080>.
+
+<a name=shell></a>
 ## Obtaining a shell
 
-After running the installer, there will not be a rootshell and ADB will not be
-enabled. Instead you can use `./installer util orbic-shell`.
+After running the installer, there will not be a root shell and ADB will not be
+enabled. Instead, you can use:
+
+```bash
+./installer util orbic-shell
+```
 
 If you are using an installer prior to 0.7.0 or `orbic-usb` explicitly, you can
 obtain a root shell by running `adb shell` or `./installer util shell`. Then,

doc/porting.md

@@ -0,0 +1,88 @@
+# Porting to new devices
+
+## When will we consider new devices?
+
+Rayhunter is already officially supported on [several devices](./supported-devices.md), and people are often interested in adding support for hardware they already own. Here's a non-exhaustive list of situations where we'd consider adding a new Tier 2 device:
+
+* The device is significantly cheaper or more available in a specific region than any device we already support.
+* The device supports 5G and costs less than 100 USD.
+* You're willing to commit to supporting this device and handling bug reports.
+* The device has support for all cellular bands and can work in any country.
+
+We want to avoid a situation where the list of supported devices keeps growing but the number of recurring contributors and maintainers stays the same.
+
+That said, you can always maintain a fork, or install Rayhunter manually without writing an installer. You can promote this work in the [GitHub discussions](https://github.com/EFForg/rayhunter/discussions) area, where most new hardware investigations happen.
+
+Please don't open issues about supporting a new device, use GitHub discussions instead. Most hardware investigations end up being abandoned, and the amount of issues we'd have to triage would be too much.
+
+## Prerequisites: root shell, and /dev/diag
+
+Rayhunter is a Linux binary that reads traffic from the Qualcomm diagnostic interface, which requires root. If either of those isn't available, Rayhunter can't work. Everything else (displays, buttons) is secondary, and we can deal with it later.
+
+In the devices we currently support `/dev/diag` is the interface for Qualcomm diagnostics and devices with this will be easiest to support. Newer Qualcomm modems expose the diagnostic interface over a USB gadget which is something we are working on support for, but do not currently have. Thus devices with the former diagnostic interface will be easier to port Rayhunter to.
+
+You can check ahead of purchase whether `/dev/diag` is available by ensuring the device has a Qualcomm MDM* chip. Other Qualcomm LTE chips might work but we haven't encountered one yet. Typically you will be able to get this information from [fcc.report](https://fcc.report), where either the chip is written down in some PDF or at least plainly visible in one of the teardown photos. Sometimes this information can also be found through teardown videos on YouTube. If you find that chip, there's a good chance (but no guarantee) `/dev/diag` is available.
+
+Any vendor other than Qualcomm (Mediatek, Rockchip, ...) is unlikely to work. Quectel sometimes repackages Qualcomm chips into larger systems and might work. Huawei devices won't work, as they use their own chips.
+
+Getting a root shell varies from device to device. Check the [GitHub discussions](https://github.com/EFForg/rayhunter/discussions) for prior art, and look through the installer source in `installer/src/` for inspiration. These approaches are common:
+
+* Connecting with `adb shell`.
+* If `adb shell` doesn't work, sending a special USB serial command might enable it.
+* Sometimes there's an unpatched CVE that can be used to launch `telnetd` as root (search "device name CVE", the website [opencve.io](https://opencve.io) is particularly easy to use).
+
+Once you have a root shell, check that `/dev/diag` exists.
+
+## Installing Rayhunter manually
+
+The Rayhunter installation consists of just two components: the `rayhunter-daemon` binary, and the config file (`config.toml`).
+
+Typically the layout on the filesystem will look like this:
+
+```text
+/data/rayhunter/rayhunter-daemon
+/data/rayhunter/config.toml
+/data/rayhunter/qmdl/
+```
+
+Then, `./rayhunter-daemon config.toml` can be started manually.
+
+You can refer to [Installing from source](./installing-from-source.md) for how to obtain the `rayhunter-daemon` binary.
+
+We're assuming that your device is ARMv7, i.e. 32-bit ARM (`armv7-unknown-linux-musleabihf`). If that's not the case, you can still build the daemon but you'll need to figure out the correct target triple on your own.
+
+You can copy the daemon and config files to the device using `netcat` or `adb push`. They don't have to be in `/data/rayhunter/`, this is just convention. If you use a different path, be sure to update the `qmdl_store_path` setting in `config.toml`.
+
+The `device` setting in `config.toml` must match one of the lowercase variant names from the `Device` enum (e.g. `"orbic"`, `"tplink"`). This controls which display driver is used.
+
+To bring the daemon up without `/dev/diag` (for instance, to test the display and web UI before the hardware path works), see [Running the daemon on your PC](./installing-from-source.md#running-the-daemon-on-your-pc).
+
+### Autostart
+
+To make Rayhunter start on boot, you'll need an init script. The existing installers use the template at `dist/scripts/rayhunter_daemon`, which has a `#RAYHUNTER-PRESTART` placeholder that gets replaced with device-specific setup commands (e.g. killing a vendor UI process, mounting an SD card). Look at how the existing installers handle this in their `install()` functions.
+
+## Display support
+
+The `device` setting [mentioned above](#installing-rayhunter-manually) also controls which display driver is loaded (see [`Device` enum in `lib/src/lib.rs`](https://github.com/EFForg/rayhunter/blob/main/lib/src/lib.rs)). Unless your device is a variant of an existing device, you'll want to add a new variant to the `Device` enum and write a corresponding display module in `daemon/src/display/`.
+
+You can play around with the existing values of the `device` setting to see which one ends up rendering on your device's display. Most likely your device has a display similar enough to an existing one, and the display module for that device (e.g. `daemon/src/display/orbic.rs`, `daemon/src/display/tplink.rs`) can be used as a starting point.
+
+If your device has LEDs instead of a display, take a look at `daemon/src/display/uz801.rs` which controls LEDs via sysfs.
+
+## Button support
+
+Rayhunter can use the power button to restart recordings via a double-tap gesture. The implementation is in [`daemon/src/key_input.rs`](https://github.com/EFForg/rayhunter/blob/main/daemon/src/key_input.rs). It currently has no structure for device-specific implementations, as all devices we support expose the same input event interface.
+
+The `key_input_mode` setting in `config.toml` controls this feature (`0` = disabled, `1` = double-tap power button to start/stop recordings).
+
+## Writing the installer, and contributing official support
+
+At this point you'll want to have figured out how to automate the entire installation in principle, and how to make it as repeatable as possible. A proof-of-concept of this in bash or another language is also a welcome contribution (to be posted on [GitHub discussions](https://github.com/EFForg/rayhunter/discussions), not as a PR).
+
+Writing the installer means adding a new variant to the `Command` enum in [`installer/src/lib.rs`](https://github.com/EFForg/rayhunter/blob/main/installer/src/lib.rs) and implementing the install logic in a new module under `installer/src/`. Each subcommand maps to a device-specific entry point function (e.g. `tplink::main_tplink`, `orbic_network::install`).
+
+The installer gets the daemon binary path from `env!("FILE_RAYHUNTER_DAEMON")`, which is set at build time. Config installation is handled by the shared `install_config()` helper in the `connection` module, which writes the config file with the correct device name.
+
+You must also add a shell utility subcommand under `installer util` (the `UtilSubCommand` enum in `installer/src/lib.rs`), e.g. `installer util tplink-shell`, `installer util orbic-shell`. This is required -- without it, users and developers have no way to interactively debug the device. Depending on connectivity, this might be a telnet session, an ADB shell, or a serial connection. Other utilities (file transfer helpers, etc.) are optional but encouraged. See the existing `UtilSubCommand` variants for examples.
+
+Please reuse existing utilities wherever possible. Take a look at [`installer/src/tplink.rs`](https://github.com/EFForg/rayhunter/blob/main/installer/src/tplink.rs) and [`installer/src/orbic_network.rs`](https://github.com/EFForg/rayhunter/blob/main/installer/src/orbic_network.rs) for inspiration. But the structures there are still evolving, and we'll happily guide you during code review.

doc/support-feedback-community.md

@@ -2,7 +2,15 @@
 
 If you're using Rayhunter (or trying to), we'd love to hear from you! Check out one of the following forums for contacting the Rayhunter developers and community:
 
-* If you've received a Rayhunter warning and would like to help us with our research, please send your Rayhunter data captures (QMDL and PCAP logs) to us at our [Signal](https://signal.org/) username [**ElectronicFrontierFoundation.90**](https://signal.me/#eu/HZbPPED5LyMkbTxJsG2PtWc2TXxPUR1OxBMcJGLOPeeCDGPuaTpOi5cfGRY6RrGf) with the following information: capture date, capture location, device, device model, and Rayhunter version. If you're unfamiliar with Signal, feel free to check out our [Security Self Defense guide on it](https://ssd.eff.org/module/how-to-use-signal).
-* If you're having issues installing or using Rayhunter, please [open an issue](https://github.com/EFForg/rayhunter/issues) on our Github repo.
+* If you've received a Rayhunter warning, please send your Rayhunter data captures (the ZIP file) to us at our [Signal](https://signal.org/) username [**ElectronicFrontierFoundation.90**](https://signal.me/#eu/HZbPPED5LyMkbTxJsG2PtWc2TXxPUR1OxBMcJGLOPeeCDGPuaTpOi5cfGRY6RrGf) with the following information: capture date, capture location, device, device model, and Rayhunter version. 
+
+  Note that the recording files are sensitive data and contain location
+  information, so we strongly recommend against posting them to publicly.
+
+  If you're unfamiliar with Signal, feel free to check out our [Security Self
+  Defense guide on it](https://ssd.eff.org/module/how-to-use-signal).
+
+* If you're having issues installing or using Rayhunter, consider checking the [Frequently Asked Questions](./faq.md) page for answers to common questions.
+* If your question isn't answered there, please [open an issue](https://github.com/EFForg/rayhunter/issues) on our Github repo.
 * If you'd like to propose a feature, heuristic, or device for Rayhunter, [start a discussion](https://github.com/EFForg/rayhunter/discussions) in our Github repo
 * For anything else, join us in the `#rayhunter` or `#rayhunter-developers` channel of [EFF's Mattermost](https://opensource.eff.org/signup_user_complete/?id=r1b6cnta9bysxk6im3kuabiu1y&md=link&sbr=su) instance to chat!

doc/supported-devices.md

@@ -30,4 +30,4 @@ Rayhunter is confirmed to work on these devices.
 ## Adding new devices
 Rayhunter was built and tested primarily on the Orbic RC400L mobile hotspot, but the community has been working hard at adding support for other devices. Theoretically, if a device runs a Qualcomm modem and exposes a `/dev/diag` interface, Rayhunter may work on it.
 
-If you have a device in mind which you'd like Rayhunter to support, please [open a discussion on our Github](https://github.com/EFForg/rayhunter/discussions)!
+If you have a device in mind which you'd like Rayhunter to support, please read the [porting guide](./porting.md) and [open a discussion on our Github](https://github.com/EFForg/rayhunter/discussions)!

doc/swagger-ui.html

@@ -0,0 +1,28 @@
+<!DOCTYPE html>
+<html lang="en">
+  <head>
+    <meta charset="utf-8" />
+    <meta name="viewport" content="width=device-width, initial-scale=1" />
+    <meta name="description" content="SwaggerUI" />
+    <title>SwaggerUI</title>
+    <link rel="stylesheet" href="https://unpkg.com/swagger-ui-dist@5.31.0/swagger-ui.css" />
+  </head>
+  <body>
+  <div id="swagger-ui"></div>
+  <script src="https://unpkg.com/swagger-ui-dist@5.31.0/swagger-ui-bundle.js" crossorigin></script>
+  <script src="https://unpkg.com/swagger-ui-dist@5.31.0/swagger-ui-standalone-preset.js" crossorigin></script>
+  <script>
+    window.onload = () => {
+      window.ui = SwaggerUIBundle({
+        url: './rayhunter-openapi.json',
+        dom_id: '#swagger-ui',
+        presets: [
+          SwaggerUIBundle.presets.apis,
+          SwaggerUIStandalonePreset
+        ],
+        layout: "StandaloneLayout",
+      });
+    };
+  </script>
+  </body>
+</html>

doc/tmobile-tmohs1.md

@@ -36,6 +36,10 @@ According to FCC ID 2APXW-TMOHS1 Test Report No. I20Z61602-WMD02 ([part 1](https
 |   66 | 1700 MHz (E-AWS) |
 |   71 | 600 MHz (USDD)   |
 
+## WiFi client mode
+
+The TMOHS1 supports WiFi client mode, allowing Rayhunter to connect to an existing WiFi network while keeping the hotspot running. See [WiFi Client Mode](./configuration.md#wifi-client-mode) for setup.
+
 ## Installing
 Connect to the TMOHS1's network over WiFi or USB tethering.
 
@@ -55,6 +59,21 @@ Then run the installer:
 | Paused           | WiFi LED blinks white.         |
 | Warning Detected | Signal LED slowly blinks red.  |
 
+## Wi-Fi auto-shutdown
+
+By default the TMOHS1 turns off its Wi-Fi access point after 10 minutes with no connected clients. Rayhunter keeps recording on the device in the background, but once the access point is down you can't reach the web UI, download captures, or see new warnings until you power cycle the hotspot.
+
+The TMOHS1's native admin UI lets you change this:
+
+1. Connect to the TMOHS1's Wi-Fi (or USB tether).
+2. In a browser open `http://192.168.0.1/` and log in with the admin password.
+3. Go to **Settings** → **Sleep** → **Wi-Fi Standby** and pick **Always on**.
+4. Click **Apply**.
+
+![TMOHS1 Wi-Fi Standby setting](./tmohs1-wifi-standby.png)
+
+Keeping Wi-Fi always on uses more battery. If you only monitor Rayhunter through the device's LEDs and don't need remote access, the default 10-minute timer is fine.
+
 ## Obtaining a shell
 Even when rayhunter is running, for security reasons the TMOHS1 will not have telnet or adb enabled during normal operation.
 

doc/tplink-m7350.md

@@ -18,7 +18,8 @@ The TP-Link M7350 supports many more frequency bands than Orbic and therefore wo
 
 The TP-Link comes in many different *hardware versions*. Support for installation varies:
 
-* `1.0`, `2.0`: **Not supported**, devs are not able to obtain a device
+* `1.0`, Confirmed working. Successfully tested by a user with the Windows installer (rayhunter-v0.10.2-windows-x86_64). Ensure the SD card is formatted as FAT32 before installation.
+* `2.0`: **Not supported**, devs are not able to obtain a device
 * `3.0`, `3.2`, `5.0`, `5.2`, `7.0`, `8.0`: **Tested, no known issues since 0.3.0.**
 * `6.2`: **One user reported it is working, not tested**
 * `4.0`: **Manual firmware downgrade required** ([issue](https://github.com/EFForg/rayhunter/issues/332))
@@ -35,11 +36,19 @@ You can get your TP-Link M7350 from:
 * First check for used offers on local sites, sometimes it's much cheaper there.
 * [Geizhals price comparison](https://geizhals.eu/?fs=tp-link+m7350).
 * [Ebay](https://www.ebay.com/sch/i.html?_nkw=tp-link+m7350&_sacat=0&_from=R40&_trksid=p4432023.m570.l1313).
+* Can also be found sold as the 'Vodafone Pocket Wifi 5' in Australia 
 
-## Installation & Usage
+## Installing
 
-Follow the [release installation guide](./installing-from-release.md). Substitute `./installer orbic` for `./installer tplink` in other documentation. The Rayhunter UI will be available at <http://192.168.0.1:8080>.
+To get started, follow the [release installation guide](./installing-from-release.md). Then run the installer with the following command:
 
+```bash
+./installer tplink
+```
+
+The Rayhunter UI will be available at <http://192.168.0.1:8080>.
+
+<a name=shell></a>
 ## Obtaining a shell
 
 You can obtain a root shell with the following command:

doc/using-rayhunter.md

@@ -19,6 +19,8 @@ You can access this UI in one of two ways:
   On the **Orbic**, you can find the WiFi network password by going to the Orbic's menu > 2.4 GHz WIFI Info > Enter > find the 8-character password next to the lock 🔒 icon.
   On the **TP-Link**, you can find the WiFi network password by going to the TP-Link's menu > Advanced > Wireless > Basic Settings.
 
+  If [WiFi client mode](./configuration.md#wifi-client-mode) is enabled, you can also reach the web UI from any device on that network at `http://<device-ip>:8080`.
+
 * **Connect over USB (Orbic):** Connect your device to your laptop via USB. Run `adb forward tcp:8080 tcp:8080`, then visit <http://localhost:8080>.
     * For this you will need to install the Android Debug Bridge (ADB) on your computer, you can copy the version that was downloaded inside the `releases/platform-tools/` folder to somewhere else in your path or you can install it manually.
     * You can find instructions for doing so on your platform [here](https://www.xda-developers.com/install-adb-windows-macos-linux/#how-to-set-up-adb-on-your-computer), (don't worry about instructions for installing it on a phone/device yet).
@@ -26,6 +28,8 @@ You can access this UI in one of two ways:
 
 * **Connect over USB (TP-Link):** Plug in the TP-Link and use USB tethering to establish a network connection. ADB support can be enabled on the device, but the installer won't do it for you.
 
+> **_NOTE:_** When downloading recordings, "Insecure download blocked" warnings can safely be ignored - this is due to Rayhunter not using HTTPS.
+
 ## Key shortcuts
 
 As of Rayhunter version 0.3.3, you can start a new recording by double-tapping the power button. Any current recording will be stopped and a new recording will be started, resetting the red line as well. This feature is disabled by default since Rayhunter version 0.4.0 and needs to be enabled through [configuration](./configuration.md).

doc/uz801.md

@@ -36,6 +36,12 @@ With the device fully booted (i.e. beaming a WiFi network, blue LED, etc.) and p
 
 Note: The default IP for UZ801 is typically `192.168.100.1`; if yours differs, use the `--admin-ip` argument to specify it.
 
+## WiFi client mode
+
+The UZ801's WCN36xx (PRONTO) radio supports concurrent AP+STA mode. The daemon has backend support for WiFi client mode on the UZ801, but this has not yet been successfully exercised end-to-end and the web UI currently does not expose the configuration surface on this device. Treat UZ801 WiFi client mode as not yet supported. See [WiFi Client Mode](./configuration.md#wifi-client-mode) for the intended setup on supported devices.
+
+The interface creation method differs from the Orbic (which uses `iw`): the UZ801 creates a P2P_CLIENT virtual interface via nl80211 and converts it to a managed STATION interface. This is handled by the daemon when the feature is enabled.
+
 ## LED modes
 | Rayhunter state  | LED indicator       |
 | ---------------- | ------------------- |

doc/wingtech-ct2mhs01.md

@@ -28,6 +28,10 @@ Wingtechs are abundant on ebay and can also be found on Amazon:
 - <https://www.ebay.com/itm/127147132518>
 - <https://www.amazon.com/AT-Turbo-Hotspot-256-Black/dp/B09YWLXVWT>
 
+## WiFi client mode
+
+The Wingtech supports WiFi client mode, allowing Rayhunter to connect to an existing WiFi network while keeping the hotspot running. See [WiFi Client Mode](./configuration.md#wifi-client-mode) for setup.
+
 ## Installing
 Connect to the Wingtech's network over WiFi or USB tethering, then run the installer:
 
@@ -50,6 +54,21 @@ telnet 192.168.1.1
 adb shell
 ```
 
+## Wi-Fi auto-shutdown
+
+By default the CT2MHS01 turns off its Wi-Fi access point after the configured sleep timer (default 10 minutes) with no connected clients. Rayhunter keeps recording on the device in the background, but once the access point is down you can't reach the web UI, download captures, or see new warnings until you power cycle the hotspot.
+
+The CT2MHS01's native admin UI lets you change this:
+
+1. Connect to the Wingtech's Wi-Fi (or USB tether).
+2. In a browser open `http://192.168.1.1/` and log in with the admin password.
+3. Go to **Settings** → **Sleep** → **Wi-Fi Standby** and pick **Always on**.
+4. Click **Save**.
+
+![CT2MHS01 Wi-Fi Standby setting](./ct2mhs01-wifi-standby.png)
+
+Keeping Wi-Fi always on uses more battery. If you primarily monitor Rayhunter through the device's screen and don't need remote access, leave the timer at its default.
+
 ## Developing
 The device has a framebuffer-driven screen at /dev/fb0 that behaves
 similarly to the Orbic RC400L, although the userspace program

installer-gui/README.md

@@ -14,12 +14,13 @@ You'll need to install [Tauri's dependencies](https://tauri.app/start/prerequisi
 
 The GUI installer pulls in the CLI installer as a library. Like with the CLI installer, the firmware binary needs to be present and can be overridden with the same envvars. See `../installer/build.rs` for options.
 
-For example, to build the firmware in development mode and then provide the path explicitly:
+For example, to build the firmware in development mode:
 
 ```bash
 cargo build-daemon-firmware-devel
+cargo build-rootshell-firmware-devel
 
-(cd installer-gui && FILE_RAYHUNTER_DAEMON=$PWD/../target/armv7-unknown-linux-musleabihf/firmware-devel/rayhunter-daemon npm run tauri android build)
+(cd installer-gui && FIRMWARE_PROFILE=firmware-devel npm run tauri android build)
 ```
 
 ## Building

installer-gui/package.json

@@ -5,6 +5,7 @@
     "type": "module",
     "scripts": {
         "dev": "vite dev",
+        "prepare": "svelte-kit sync",
         "build": "vite build",
         "preview": "vite preview",
         "check": "svelte-kit sync && svelte-check --tsconfig ./tsconfig.json",
@@ -15,27 +16,27 @@
         "tauri": "tauri"
     },
     "dependencies": {
-        "@tailwindcss/vite": "^4.1.16",
+        "@tailwindcss/vite": "^4.2.2",
         "@tauri-apps/api": "^2",
         "@tauri-apps/plugin-opener": "^2",
         "tailwindcss": "^4.1.16"
     },
     "devDependencies": {
-        "@eslint/js": "^9.38.0",
+        "@eslint/js": "^10.0.1",
         "@sveltejs/adapter-static": "^3.0.6",
-        "@sveltejs/kit": "^2.9.0",
-        "@sveltejs/vite-plugin-svelte": "^5.0.0",
+        "@sveltejs/kit": "^2.60.1",
+        "@sveltejs/vite-plugin-svelte": "^7.0.0",
         "@tauri-apps/cli": "^2",
-        "eslint": "^9.38.0",
+        "eslint": "^10.2.1",
         "eslint-config-prettier": "^10.1.8",
-        "eslint-plugin-svelte": "^3.13.0",
-        "globals": "^16.4.0",
-        "prettier": "^3.6.2",
-        "prettier-plugin-svelte": "^3.4.0",
-        "svelte": "^5.0.0",
-        "svelte-check": "^4.0.0",
-        "typescript": "~5.6.2",
-        "typescript-eslint": "^8.46.2",
-        "vite": "^6.0.3"
+        "eslint-plugin-svelte": "^3.17.0",
+        "globals": "^17.5.0",
+        "prettier": "^3.8.3",
+        "prettier-plugin-svelte": "^3.5.1",
+        "svelte": "^5.55.7",
+        "svelte-check": "^4.4.6",
+        "typescript": "~6.0.3",
+        "typescript-eslint": "^8.58.2",
+        "vite": "^8.0.9"
     }
 }

installer-gui/src-tauri/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "installer-gui"
-version = "0.9.0"
+version = "0.11.2"
 edition = "2024"
 
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
@@ -21,4 +21,5 @@ tauri-plugin-opener = "2"
 serde = { version = "1", features = ["derive"] }
 serde_json = "1"
 anyhow = "1.0.100"
+shlex = "1"
 installer = { path = "../../installer" }

installer-gui/src-tauri/src/lib.rs

@@ -1,10 +1,11 @@
+use anyhow::Context;
 use tauri::Emitter;
 
 async fn run_installer(app_handle: tauri::AppHandle, args: String) -> anyhow::Result<()> {
+    let args_vec = shlex::split(&args).context("Failed to parse arguments: unclosed quote")?;
     tauri::async_runtime::spawn_blocking(move || {
         installer::run_with_callback(
-            // TODO: we should split using something similar to shlex in python
-            args.split_whitespace(),
+            args_vec.iter().map(|s| s.as_str()),
             Some(Box::new(move |output| {
                 app_handle
                     .emit("installer-output", output)

installer-gui/src/routes/+page.svelte

@@ -81,6 +81,9 @@
     <input
         class="mr-1 px-5 py-2 rounded-lg shadow-md"
         placeholder="Enter CLI installer args..."
+        autocapitalize="off"
+        autocorrect="off"
+        spellcheck="false"
         bind:value={installerArgs}
     />
     <button