mirror of
https://github.com/EFForg/rayhunter.git
synced 2026-04-26 07:29:59 -07:00
1a80a0576c
Also add some more debug-logging to telnet_send_file since it appears to be janky on my device. see #599
51 lines
2.4 KiB
Markdown
51 lines
2.4 KiB
Markdown
# Orbic/Kajeet RC400L
|
|
|
|
The Orbic RC400L is an inexpensive LTE modem primarily designed for the US market, and the original device for which Rayhunter is developed.
|
|
|
|
It is also sometimes sold under the brand Kajeet RC400L. This is the exact same hardware and can be treated the same.
|
|
|
|
You can buy an Orbic [using bezos
|
|
bucks](https://www.amazon.com/Orbic-Verizon-Hotspot-Connect-Enabled/dp/B08N3CHC4Y),
|
|
or on [eBay](https://www.ebay.com/sch/i.html?_nkw=orbic+rc400l).
|
|
|
|
[Please check whether the Orbic works in your country](https://www.frequencycheck.com/countries/), and whether the Orbic RC400L supports the right frequency bands for your purpose before buying.
|
|
|
|
## Supported Bands
|
|
|
|
| Frequency | Band |
|
|
| ------- | ------------------ |
|
|
| 5G (wideband,midband,nationwide) | n260/n261, n77, n2/5/48/66 |
|
|
| 4G | 2/4/5/12/13/48/66 |
|
|
| Global & Roaming | n257/n78 |
|
|
| Wifi 2.4Ghz | b/g/n |
|
|
| Wifi 5Ghz | a/ac/ax |
|
|
| Wifi 6 | 🮱 |
|
|
|
|
## The Network Installer
|
|
|
|
Since Rayhunter 0.6.0 there is an alternative, experimental installation
|
|
procedure at `./installer orbic-network` that is supposed to eventually replace
|
|
`./installer orbic`. It does not require any USB driver installation and works
|
|
identically on Windows, Mac and Linux. From our testing it works much more
|
|
reliably on Windows than `./installer orbic` does.
|
|
|
|
The drawback is that the device's admin password is required.
|
|
|
|
1. Connect to the Orbic's network via WiFi or USB tethering
|
|
2. Run `./installer orbic-network --admin-password 'mypassword'`
|
|
|
|
* On Verizon Orbic, the password is the WiFi password.
|
|
* On Kajeet/Smartspot devices, the default password is `$m@rt$p0tc0nf!g`
|
|
* On Moxee-brand devices, check under the battery for the password.
|
|
* You can reset the password by pressing the button under the back case until the unit restarts.
|
|
|
|
3. The installer will eventually reboot the device, at which point the device is up and running.
|
|
|
|
## Obtaining a shell
|
|
|
|
After running through the installation procedure, you can obtain a root shell
|
|
by running `adb shell` or `./installer util shell`. Then, inside of that shell
|
|
you can run `/bin/rootshell` to obtain "fakeroot."
|
|
|
|
If you are using the network installer, there will not be a rootshell and ADB will not be enabled by the installer. Instead you can use `./installer util orbic-start-telnet` and connect to the hotspot using `nc 192.168.1.1 23`. On Windows you might not have `nc` and will have to use WSL for that.
|