mirror of
https://github.com/EFForg/rayhunter.git
synced 2026-04-26 07:29:59 -07:00
781d07230c
The orbic now has many different shells, crosslink to the docs on shells to find the right one. Fix #753 Ref https://github.com/EFForg/rayhunter/discussions/842
50 lines
2.1 KiB
Markdown
50 lines
2.1 KiB
Markdown
# Orbic/Kajeet RC400L
|
|
|
|
The Orbic RC400L is an inexpensive LTE modem primarily designed for the US market, and the original device for which Rayhunter is developed.
|
|
|
|
It is also sometimes sold under the brand Kajeet RC400L. This is the exact same hardware and can be treated the same.
|
|
|
|
You can buy an Orbic [using bezos
|
|
bucks](https://www.amazon.com/Orbic-Verizon-Hotspot-Connect-Enabled/dp/B08N3CHC4Y),
|
|
or on [eBay](https://www.ebay.com/sch/i.html?_nkw=orbic+rc400l). You should not
|
|
pay more than 30 USD for such a device (without shipping).
|
|
|
|
[Please check whether the Orbic works in your country](https://www.frequencycheck.com/countries/), and whether the Orbic RC400L supports the right frequency bands for your purpose before buying.
|
|
|
|
## Supported Bands
|
|
|
|
| Frequency | Band |
|
|
| ------- | ------------------ |
|
|
| 5G (wideband,midband,nationwide) | n260/n261, n77, n2/5/48/66 |
|
|
| 4G | 2/4/5/12/13/48/66 |
|
|
| Global & Roaming | n257/n78 |
|
|
| Wifi 2.4Ghz | b/g/n |
|
|
| Wifi 5Ghz | a/ac/ax |
|
|
| Wifi 6 | 🮱 |
|
|
|
|
## Two kinds of installers
|
|
|
|
The orbic's installation routine underwent many different changes:
|
|
|
|
1. The ADB-based shellscript prior to version 0.3.0
|
|
2. The Rust-based, ADB-based installer since version 0.3.0
|
|
3. Then, starting with 0.6.0, an alternative installer `./installer
|
|
orbic-network` that is supposed to work more reliably, can run over the
|
|
Orbic's WiFi connection and without the need to manually install USB drivers
|
|
on Windows.
|
|
4. Starting with 0.8.0, `orbic-network` has been renamed to `orbic`, and the
|
|
old `./installer orbic` is now called `./installer orbic-usb`.
|
|
|
|
It's possible that many tutorials out there still refer to some of the old
|
|
installation routines.
|
|
|
|
<a name=shell></a>
|
|
## Obtaining a shell
|
|
|
|
After running the installer, there will not be a rootshell and ADB will not be
|
|
enabled. Instead you can use `./installer util orbic-shell`.
|
|
|
|
If you are using an installer prior to 0.7.0 or `orbic-usb` explicitly, you can
|
|
obtain a root shell by running `adb shell` or `./installer util shell`. Then,
|
|
inside of that shell you can run `/bin/rootshell` to obtain "fakeroot."
|