mirror of
https://github.com/EFForg/rayhunter.git
synced 2026-04-26 23:49:59 -07:00
6941bc57b6
* Fix autostart by adding another port trigger for rayhunter-daemon * Use Orbic's IOCTL params as fallback * Fix sdcard path and make it configurable * Update docs to indicate support * Add uninstalling instructions for TP-Link
77 lines
4.3 KiB
Markdown
77 lines
4.3 KiB
Markdown
# TP-Link M7350
|
|
|
|
The TP-Link M7350 is supported by Rayhunter from 0.3.0 release. TP-Link M7350 supports many more frequency bands than Orbic and therefore works in Europe and also in some Asian and African countries.
|
|
|
|
## Hardware versions
|
|
|
|
The TP-Link comes in many different *hardware versions*. Support for installation varies:
|
|
|
|
* `1.0`, `2.0`: **Not suported**, probably impossible to obtain anymore (even second-hand), however there is one report that installation is possible on `1.0` (but no reports if it is working or not)
|
|
* `3.0`, `3.2`, `5.0`, `5.2`, `7.0`, `8.0`: **Tested, no known issues since 0.3.0.**
|
|
* `6.2`: **One user reported it is working**
|
|
* `4.0`: **Manual firmware downgrade required** ([issue](https://github.com/EFForg/rayhunter/issues/332))
|
|
* `9.0`: **Working since 0.3.2.**
|
|
|
|
TP-Link versions newer than `3.0` have cyan packaging and a color display. Version `3.0` has a one-bit display and white packaging.
|
|
|
|
You can find the exact hardware version of each device under the battery or next to the barcode on the outer packaging, for example `V3.0` or `V5.2`.
|
|
|
|
When filing bug reports, particularly with the installer, please always specify the exact hardware version.
|
|
|
|
You can get your TP-Link M7350 from:
|
|
|
|
* First check for used offers on Ebay or equivalent, sometimes it's much cheaper there.
|
|
* [Geizhals price comparison](https://geizhals.eu/?fs=tp-link+m7350)
|
|
* [Ebay](https://www.ebay.com/sch/i.html?_nkw=tp-link+m7350&_sacat=0&_from=R40&_trksid=p4432023.m570.l1313)
|
|
|
|
## Installation & Usage
|
|
|
|
Follow the [release installation guide](./installing-from-release.md). Substitute `./installer orbic` for `./installer tplink` in other documentation. The Rayhunter UI will be available at [http://192.168.0.1:8080](http://192.168.0.1:8080).
|
|
|
|
Unlike on Orbic, the installer will not enable ADB. Instead, you can obtain a root shell with the following command:
|
|
|
|
```sh
|
|
./installer util tplink-start-telnet
|
|
telnet 192.168.0.1
|
|
```
|
|
|
|
## Display states
|
|
|
|
If your device has a color display, Rayhunter will show the same red/green/white line at the top of the display as it does on Orbic, each color meaning "warning"/"recording"/"paused" respectively. See [Using Rayhunter](./using-rayhunter.md).
|
|
|
|
If your device has a one-bit (black-and-white) display, Rayhunter will instead show an emoji to indicate status:
|
|
|
|
* `!` means "warning (potential IMSI catcher)"
|
|
* `:)` (smiling) means "recording"
|
|
* `:` (face with no mouth) means "paused"
|
|
|
|
## Configuration
|
|
|
|
Displaying status can be changed in the configuration (`config.toml`) file, where UI level (`ui_level` variable) could be changed to:
|
|
- `0`: invisible mode, no indicator that Rayhunter is running
|
|
- `1`: subtle mode, display a green line at the top of the screen when Rayhunter is running
|
|
- `2`: demo mode, display a fun Orca GIF
|
|
- `3`: display the EFF logo
|
|
|
|
You can also change `colorblind_mode` (default is `false`) to `true`. In that case there will be blue line instead of green line.
|
|
|
|
You can change the `port` (default is `8080`) where Rayhunter is listening for incoming connections and more advanced users can change the variables `qmdl_store_path` and `debug_mode`. However, change those variables only if you know what you are doing.
|
|
|
|
## Power-saving mode/sleep
|
|
|
|
By default the device will go to sleep after N minutes of no devices being connected. In that mode it will also turn off connections to cell phone towers.
|
|
In order for Rayhunter to record continuously, you have to turn off this sleep mode in TP-Link's admin panel (go to **Advanced** - **Power Saving**) or keep e.g. your phone connectd on the TP-Link's WiFi.
|
|
|
|
## Port triggers
|
|
|
|
On hardware revisions starting with v4.0, the installer will modify settings to
|
|
add two port triggers. You can look at `Settings > NAT Settings > Port
|
|
Triggers` in TP-Link's admin UI to see them.
|
|
|
|
1. One port trigger "rayhunter-root" to launch the telnet shell. This is only needed for installation, and can be removed after upgrade. You can reinstall it using `./installer util tplink-start-telnet`.
|
|
2. One port trigger "rayhunter-daemon" to auto-start rayhunter on boot. If you remove this, rayhunter will have to be started manually from shell.
|
|
|
|
## Other links
|
|
|
|
For more information on the device and instructions on how to install Rayhunter without an installer (i.e. manually), please see [rayhunter-tplink-m7350](https://github.com/m0veax/rayhunter-tplink-m7350/)
|