grgsm_scanner (like many GNU Radio tools) writes scan results to
stderr, not stdout. The stderr reader was only logging at debug
level and discarding lines. Now feeds stderr into the parse queue.
Also added info-level logging for all scanner output lines to aid
debugging.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Parser expected pipe-delimited table rows but grgsm_scanner outputs
comma-separated key-value pairs like:
ARFCN: 975, Freq: 925.2M, CID: 13522, LAC: 38722, MCC: 262, MNC: 1, Pwr: -58
This was the root cause of no data appearing in GSM Spy.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
stop_scanner() cleared gsm_spy_active_device without calling
release_sdr_device(), so the device stayed claimed in the registry.
The scanner thread's finally block then saw None and skipped release.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
GSM Spy was failing with FileNotFoundError because grgsm_scanner
wasn't installed. These tools are now installed automatically by
setup.sh (both Debian and macOS) and included in the Dockerfile,
matching how other tools like multimon-ng and ffmpeg are handled.
- setup.sh: Remove ask_yes_no prompts for gr-gsm and tshark, install
unconditionally; add check_recommended tier for final summary
- Dockerfile: Add tshark to apt layer, add gr-gsm RUN layer with
apt-then-source-build fallback, preseed debconf for tshark
- gsm_spy.py: Add shutil.which pre-check in start_scanner route,
catch FileNotFoundError in scanner_thread to stop retry loop
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- kill_all() now resets gsm_spy_scanner_running and related state so
the scanner thread stops after killall
- scanner_thread sets flag to False instead of None on exit
- Restore alert_rules, alert_events, recording_sessions tables and
wifi_clients column removed by PR in database.py
- Escape all server-sourced values in analysis modals with escapeHtml()
- Reset gsm_towers_found/gsm_devices_tracked on stop to prevent
counter drift across sessions
- Replace raw terminate/kill with safe_terminate() in scanner_thread
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Move waterfall controls from the sidebar into a function-strip bar inside
#listeningPostVisuals so they sit directly above the waterfall canvas.
Also fix the "SDR device in use" error when clicking a waterfall frequency
to listen — the WebSocket waterfall's device claim wasn't being released
before the audio start request because the backend cleanup hadn't finished.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Zooming caused "I/Q capture process exited immediately" because the client
closed the WebSocket and opened a new one, racing with the old rtl_sdr
process releasing the USB device. Now zoom/retune sends a start command on
the existing WebSocket, and the server adds a USB release delay plus retry
loop when restarting capture within the same connection.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
After a WebSocket handler exits, flask-sock returns a Response to
Werkzeug which writes "HTTP/1.1 200 OK..." on the still-open socket.
Browsers see these HTTP bytes as a malformed WebSocket frame, causing
"Invalid frame header".
Now the handler explicitly closes the raw TCP socket after the
WebSocket close handshake, so Werkzeug's write harmlessly fails.
Applied to both waterfall and audio WebSocket handlers.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
simple-websocket 1.1.0's receive(timeout=N) returns None on timeout
instead of raising TimeoutError. The handler treated None as
"connection closed" and broke out of the loop, causing Werkzeug to
write its HTTP 200 response on the still-open WebSocket socket.
The browser saw those HTTP bytes as an invalid WebSocket frame.
Now checks ws.connected to distinguish timeout (None + connected)
from actual close (None + not connected).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
agents.js syncLocalModeStates() expects these endpoints to check
whether each mode is running locally. Both were missing, causing
404 errors on mode switch.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The fft_reader thread was calling ws.send() concurrently with
ws.receive() in the main loop. simple-websocket is not thread-safe
for simultaneous read/write, corrupting frame headers. Now the reader
thread enqueues frames and only the main loop touches the WebSocket.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace the batch rtl_power SSE pipeline with continuous I/Q streaming
via WebSocket for smooth ~25fps waterfall display. The server captures
raw I/Q samples (rtl_sdr/rx_sdr), computes Hann-windowed FFT, and
sends compact binary frames (1035 bytes vs ~15KB JSON, 93% reduction).
Client falls back to existing SSE path if WebSocket is unavailable.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a phosphor-persistence waveform scope showing audio RMS/peak
levels during ISS SSTV and General SSTV decoding, matching the
existing pager scope pattern with a purple color scheme.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Enable -M level on rtl_433 to include RSSI/SNR in decoded JSON, extract
signal levels and push scope events to the SSE stream. Renders a green-
themed canvas oscilloscope showing signal strength pulses on packet decode
with amber SNR indicator and decay between packets.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Tap the rtl_fm → multimon-ng audio pipeline via a relay thread to extract
RMS/peak amplitude levels and render a 60fps canvas oscilloscope during
pager decoding, giving visual feedback of RF activity before messages are
fully decoded.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Reverts IQ pipeline and removes syncWaterfallToFrequency calls from
pager, sensor, rtlamr, DMR, SSTV, and SSTV general modes. Waterfall
is now exclusive to listening post mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace rtl_fm/rtl_433 with rtl_sdr for raw IQ capture when available,
enabling a Python IQ processor to compute FFT for the waterfall while
simultaneously feeding decoded data to multimon-ng (pager) or rtl_433
(sensor). Falls back to the legacy pipeline when rtl_sdr is unavailable.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Kill audio pipeline when startup produces no data instead of leaving
zombie processes running
- Skip unnecessary 1s USB release delay when no processes were active
- Remove racy fresh=1 pipeline restart from stream endpoint
- Await stopScanner() before starting direct listen to prevent race
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Stream threads for sensor, pager, acars, rtlamr, dmr, and dsc modes
never called release_sdr_device() when their SDR process crashed,
leaving devices permanently locked in the registry. Also fixes orphaned
companion processes (rtl_fm, rtl_tcp) not being killed on crash, start
path failures leaking processes, DMR stop handler missing lock, and
listening post/audio websocket pkill nuking all system-wide rtl_fm
processes. Wires up register_process()/unregister_process() so the
atexit/signal cleanup safety net actually works, and adds rtl_tcp,
rtl_power, rtlamr, ffmpeg to the killall endpoint.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The dmrRawOutput div was rendering garbled box-drawing characters from
the dsd-fme ASCII art banner below the signal activity canvas. Remove
the div and filter banner lines (box-drawing chars, version info) in
the parser so they never become events.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The stream thread used a blocking readline() with no timeout, so once
DSD finished outputting its startup banner there were no more events
until actual signal activity. The frontend decayed to zero and appeared
dead. If DSD crashed, the synthesizer state never transitioned to
'stopped' so there was no visual or textual indication of failure.
- Use select() with 1s timeout on DSD stderr to avoid indefinite block
- Send heartbeat events every 3s while decoder is alive but idle
- Detect DSD crashes: capture exit code and remaining stderr, send as
'crashed' status with details and show notification to user
- Frontend properly transitions synthesizer to 'stopped' on process
death (was only happening on user-initiated stop)
- Increase idle breathing amplitude so LISTENING state is clearly
visible (0.12 +/- 0.06 vs old 0.05 +/- 0.035)
- Release device reservation on crash, not just user stop
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
DMR was missing checkDeviceAvailability/reserveDevice/releaseDevice
calls that other modes (SSTV, listening post) use, so the device
dropdown showed device 0 as available even when another process held
it. Also detect USB claim errors from rtl_fm and surface a clear
message telling the user to pick a different device.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The DSD stderr parser had regex ordering bugs that swallowed voice and
call events as bare slot events, and only matched classic dsd output
format (not dsd-fme). Unmatched lines were silently dropped, leaving
the signal activity panel with nothing to display.
- Reorder regex checks: TG/Src before voice before slot
- Support dsd-fme comma-separated format (TG: x, Src: y)
- Make bare slot regex strict (only standalone "Slot N" lines)
- Forward unmatched DSD lines as raw events for diagnostics
- Add LISTENING state to signal activity panel for raw output
- Show raw decoder output text below synthesizer canvas
- Fix test mocks for find_dsd() tuple return value
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The APRS route called app_module.reserve_sdr_device() which does not
exist, causing an AttributeError that Flask returned as an HTML error
page. The frontend then failed to parse it as JSON, showing
"Unexpected token '<'" to the user. Fixed to use claim_sdr_device()
which is the correct function used by all other modes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
SSTV was not claiming/releasing SDR devices through the centralized
registry, so the device state panel always showed the device as idle
during SSTV use. Added claim_sdr_device/release_sdr_device on the
backend and reserveDevice/releaseDevice on the frontend, matching the
pattern used by all other modes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Users can now manage decoded SSTV images with download and delete actions
accessible from hover overlays on gallery cards, the full-size image modal
toolbar, and a "Clear All" button in the gallery header. Both ISS and
General SSTV modes are supported.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
slowrx is a GTK GUI app that doesn't support CLI usage, so the SSTV
decoder was silently failing. This replaces it with a pure Python
implementation using numpy and Pillow that supports Robot36/72,
Martin1/2, Scottie1/2, and PD120/180 modes via VIS header auto-detection.
Key implementation details:
- Generalized Goertzel (DTFT) for exact-frequency tone detection
- Vectorized batch Goertzel for real-time pixel decoding performance
- Overlapping analysis windows for short-window frequency estimation
- VIS header detection state machine with parity validation
- Per-line sync re-synchronization for drift tolerance
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
rtl_fm stderr was sent to DEVNULL, hiding the actual failure reason
(rc=1). Now captured and surfaced in the error response. Also drains
rtl_fm stderr during normal operation to prevent pipe blocking.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Use -o - (stdout) instead of -o /dev/null for audio output, as
dsd-fme expects specific output targets. Remove -N flag which may
cause issues in headless mode. Add stderr capture on pipeline
failure for better error messages.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
dsd-fme uses different protocol flags than classic dsd (e.g. -fs for
DMR instead of -fd, -f1 for P25 instead of -fp). Add -N flag to
disable ncurses terminal which is required when reading from stdin pipe.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Check for dsd-fme binary (common fork) before falling back to dsd.
Disable audio output with -o /dev/null to prevent PulseAudio
connection failures when running under sudo.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- DMR/P25 digital voice decoder mode with DSD-FME integration
- WebSDR mode with KiwiSDR audio proxy and websocket-client support
- Listening post waterfall/spectrogram visualization and audio streaming
- Dockerfile updates for mbelib and DSD-FME build dependencies
- New tests for DMR, WebSDR, KiwiSDR, waterfall, and signal guess API
- Chart.js date adapter for time-scale axes
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a general-purpose SSTV decoder alongside the existing ISS SSTV mode,
supporting USB/LSB/FM modulation on common amateur radio HF/VHF/UHF
frequencies (14.230 MHz USB, 3.845 MHz LSB, etc.) with auto-detection
of modulation from preset frequency table.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add SDR device reservation to prevent conflicts with other modes, and
capture rtl_fm stderr so actual error messages are reported to the user
instead of a generic exit code.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
